Help please, I have created two document folders???

I have somehow created 2 Document folders, now when I save a document I have to check both folders to find it. How do I fix this please? I have a Mac OS X V 10.6.8

Put all the files into one folder and delete the other. The default folder is the one you should keep. This will be the one in your /Home/ folder.

Similar Messages

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it. help help help please - I have latest version of indesign - thanks

I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it.
Is it not possible to create a text box, fill it with dynamic (data driven) text, but make the font size either scale up or down automatically, so that the entire text box is filled? This is a feature in PrintShop Mail Pro called COPY FIT. but no such feature in Indesign??
help help help please - I have latest version of indesign - thanks, DJ

lol... it seems to work, but I have another huge problem!
Apparently .CSV files cannot contain page breaks in the data! The data I am trying to merge is a 'letter', with paragraphs, line breaks, etc.,
But, after data merging, it ignores page breaks and only merges the first paragraph of each letter. (sigh)
Solution? Hopefully, an EASY solution. lol as we have thousands of records.
Is there a third party indesign plugin that will allow .xml, or .xls data merge import??
Thx,
DJ

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

Unable to publish a single site when I have created two

Using iWeb 08, I have created two separate sites. When I select one and attempt to publish to a folder, both sites are included. I cannot find a way to publish one site only. Am I overlooking the obvious or is iWeb so impressed with my work that it insists that both need to be seen?

I ran into this same problem. I created one for my personal site and then another for my hobbies. The only solution that I found for this is to create a new user, in my case I just called it my website's name, and then publish the website to that user's site file. It's a workaround really, not a solution. But I have not found another way to do it. Hope it helps.

I have created two servers in my "Mail"

I have created two servers in my "Mail" and need to eliminate one of them, as I need to select the proper one, each time I send an email. I don't know how to do that. This is the message I get;
"The servers marked with alert icons are in conflict and cannot be saved. No two servers may share the same address and authentication settings. Please resolve the conflicts and try again"
How do I correct this?

Go to the Mail/Preferences/Accounts/Outgoing Mail Server.
Click on the drop-down list and choose "Edit Server List"
This should bring up a window with a list showing the two identical servers.
If you see two servers in the list that look the same, click on one of them and then click on the - (minus) button below the list to remove the server you've chosen to get rid of.
Depending on how the settings work out, you may need to go back and select the email account you want to work with and then choose the remaining server for the account to use to send mail (if it isn't already shown in the list).

I have created two tables for my new report under one transport request.

Unwanted table transported
I have created two tables for my new report under one transport request.
But I only need one table and the second table I was supposed to delete.
However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
how to handle this issue.
I am not sure any additional changes for this program.
Could you please suggest me an idea.
Thanks in adv

>
sam kumar wrote:
> Unwanted table transported
> I have created two tables for my new report under one transport request.
> But I only need one table and the second table I was supposed to delete.
> However by mistake, with out deleting the second tableu2026 the transport request is released and moved to quality system.
>
> how to handle this issue.
>
> I am not sure any additional changes for this program.
> Could you please suggest me an idea.
>
> Thanks in adv
Does one custom table more or less really matter? If you really want delete it, delete the table in DEV which will put it into a new transport and get that transport moved to TEST.

I have created two related books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

I have created two related Blurb books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Using Pages, I have created a document and inserted a Table for use in logging an inventaory. When I came to print this off however the lines for the table were missing but the text was in the Table format, weird! How do I print the Table?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to acess the hidden partition in Win PE 3.0 environment using WMI

We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to access the hidden partition in Win PE 3.0 environment using WMI. VBScript code snippet used to detect the partitions is given
below:-
SetobjWMIService = GetObject("winmgmts:"_&
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
Select * from Win32_LogicalDisk")
It will return the partition which is active but fails to list the partition which is hidden. The same piece of code was supported on WinPE 2.0

I am giving the complete code, may be you are able to understand better. We are using Win32_LogicalDisk to retrieves the complete information of all the drives (like C:, D:) including removable drives.
Function
LocalDriveFound()
    strComputer =
SetobjWMIService = GetObject("winmgmts:"_
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
"Select * from Win32_LogicalDisk")
ForEachDiskDrive
IncolDisks
        DriveLetter = Left(DiskDrive.Name,1)
        DriveType = DiskDrive.DriveType
        VolumeName = DiskDrive.VolumeName
        WScript.echo Driveletter &
"|"& Drivetype &
"|"&VolumeName
SelectCaseDriveType
Case2 ,3
'Fixed or removable
If(VolumeName=USBVolumeName)
Then
If(DriveLetter<>
"Z")
Then
                    ChangeDriveLetterWithMountvol DriveLetter,
"Z"
EndIf
                bIsLocal=
True
EndIf
If(VolumeName=USBRootName)
Then
If(DriveLetter<>
"Y")
Then
                    ChangeDriveLetterWithMountvol DriveLetter,
"Y"
EndIf
                bIsLocal=
True
EndIf
CaseElse
EndSelect
Next
SetDrives =
Nothing
SetFileSystemObject =
Nothing
End
Function

HT4314 We have one appleid user account and have created two game center logins, but can now only access one...any idea how to be able to access the other

We have one appleid and have created two game center login names under that one apple id. now we can only access one of the logins. does anyone know how to get to the other account

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

I have created a document in in design but when i print it out the borders are wrong. How do I fix this?

I have created a document in in design and have put a border around a photo and text box, but when i print it out the border is not even. How do I fix this?
Barry

Hello John, Thanks for replying. I have attached the document as a PDF (is this OK). I have been tasked with designing this certificate for my local RSL sub-Branch for our up coming Centenary Of ANZAC commemorations. As most of what I do has been self taught I’m sure there is a simple answer to my problem. I have adobe CS6. This is how I set the document up. I first used the rectangle frame tool then pulled in a photo from Bridge and faded it.I then did the same with the logo. For the text I used the text frame then used the frame tool twice to form the border and adjusted the thickness. Then I set all of the margins and the document to A4 . When the document is printed it shows even borders of 12mm on the top bottom and right side but the left side is 34mm. I hope this makes some sense to you John.
Kind regards Barry

Where is the (terminal-) Man(ual), please (I have shown the hidden folders) ?

Hi everybody !
I am a third year informatics learner, I am from Switzerland, an my mother tongue is french.
Now, am I searching for exporting the help (man) of the Terminal. In this last, the man occurs only for specified commands, or only some pages.
But I would like to export this Man (as in preview, or in pdf), to have it all.
Desperating of making this with Linux, I tried this with OS X mountain lion.
My last attempt was to type in the Terminal:
manpath
it answered to me that it was in /usr/shared/Man
And I have shown the hidden folders and files, but: unfindable; I go in ./utilisateurs/partagé/ , there is no visible Man.
Could someone help me, please ?
Thank you in advance.

man -t ls | open -f -a Preview

HELP! Random errors creating SAP documents via Add-On.

Hi,
We have a very odd situation. Our add-on has been running for 4 years. During this time, we've made several enhancements. In the last couple of weeks, users are getting random errors during the code that posts SAP documents. The error doesn't occur creating the same documents everytime but the error message is always the same. I cannot get the add-on to crash in the development environment. Furthermore, once a crash occurs, the users can immediately try again and the document will then be created successfully so it's baffling. We thought we'd tracked it down to the fact that when restarting a users Windows session, we were retaining the user profile files that SAP creates to store the SQL Server settings. We found that the problem went away once we started deleting these files upon logout, but, the problem just got less frequent, it didn't completely go away. Here is the error information:
Error: The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))
Source: Interop.SAPbobsCOM
Stack Trace: at SAPbobsCOM.FieldClass.set_Value(Object pVal)
I should say we've also uninstalled and reinstalled the DI API but that didn't help either. We are running SAP 2007A SP01 P05 with users logging into Windows Server 2003 via Citrix. Also note, this error is only occuring with documents being created through the add-on, no crashes occur creating documents direclty through SAP front end.
Thanks very much,
David

Hello David.
I have the exatly the same situation at Customer, only in 2007A version.
The Addon has been developed for 6.5 and was running perfect in last 4 years. After upgrade, the users got the random messages. and the user try it again can sucessfully post the documents. Only at this company.
There is no citrix, and virtual server, onyl W2003 (32bit:) behind a firewall. (MS SQL 2005 SP2)
In my sample, and your error message is the common: YOu got the message when you are using User Defined Field in marketing documents.
I have found a note about change "coding" of update of User Defined Fields, it was not helped.
Note number: 1235603
Major change:
+
This issue results from using the following code:
SAPbobsCOM.Field f = oPOrders.Lines.UserFields.Fields.Item("U_test")
Instead of the above syntax, you should use the following:
SAPbobsCOM.ProductionOrders_Lines f1 = oPOrders.Lines
SAPbobsCOM.Field f = f1.UserFields.Fields.Item("U_test")
Using the suggested syntax lets you perform the operation correctly. The issue does not happen with a regular connection.
+
In Small DB-s i was unbale to reproduce this issue, but in that specific customer (>40GB) i always trouble with this.
My experience,
- that i have created some custom indexes over marketing documents, and the error message was not appears in frequently.
- changed 32 SQL Server Memory Allocation to EWA, the error message was not appears in frequently.
I think this is an SQL server issue.
I am intrested in the solution, SAP Support Center was unable to find any solution for this issue.
Regards,
János Nagy

HT4623 My ipad keeps crashing & now it won't come back on, just comes up to connect to itunes. Did that and tried a restore but just keeps comin up an unknown error, help please, I have so much on my ipad.

My ipad keeps crashing and this time it won't come back on it just keeps telling me to connect to itunes which I did and it just keeps telling me it can't restore this ipad because an error has occured! Really need help please?

If it keeps coming up with an unknown error - no error code given - try another computer. If that doesn't work, it's time to take it to an Apple Store or an authorized service center to have the device evaluated.

Help please, I have created two document folders???

Similar Messages

Maybe you are looking for