HELP PLEASE I ve bought loadsa stuff but still can't get it working
Hi, I have a powerbook and want to record into garage bands using guitars and mics and stuff. I was told to buy a fasttrack audio interface but when i was recordng it was crashing. Then I was instructed to buy more memory, I now have 1.25gb of it!!! However, when I try to record my guitar into garage bands there is nowhere near enough volume and even with the levels up at the highest I can't get anything like enough. I have tried running the guitar through an amp, and trying an acoustic guitar as opposed to an electric guitar but still the levels are reallt low and this changes nothing. Can someone please help me, I have spent alot of money on this stuff and feel I have really wasted it!!!!
Apple Powerbook Mac OS X (10.3.9) 1.25Gb processor
"I went under tool and scrolled to options and clicked on it but saw no 'toolbars'.
OK, I think we have to start all over. What do you mean by "FF tool bar"? All these time I thought you mean the "Menu Bar" which you should already have since you have the "Tools" option.
So what 'FF tool bar' are you talking about?
Similar Messages
-
HT204053 i have put in my apple id and password but still can not get imessage and facetime to work
I have put in my apple id and password but still can not get imessage or facetime to work please help...thanks
Please try to sign in at https://appleid.apple.com
Check if your new username/email address is verfied
If this works, delete your account on your iPhone (Settings > iCloud)
Sign back in -
I have done everything but still can't get email on my iPad or iPhone ! What shall I do now?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?
The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products -
Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?
Never mind, I finally got it working, thanks!
-
Hello - can anyone tell me why my iPad (4th Gen) screen will no longer rotate. I don't have a screen lock symbol next to the battery icon. I have the rotate icon on my desktop but still can't get the screen to rotate.
Double-click the Home button and swipe Task Bar to the right. Check the Rotation Lock on the far left of Task Bar.
http://i1224.photobucket.com/albums/ee374/Diavonex/ba23c598623fe4fd062a40e349af2 18d.jpg -
I got my iphone to start sending emails, but still can't get the ipad to do so.
You should take it right back to the Genius Bar. After they fix or replace it, make sure you can text, call and use all the functions before you leave the store.
-
I want to burn my imovie to a dvd. All the help info says to use idvd but I can't get it to open. The applecare guy said idvd is no longer included in new macs, so why are all the instructions still saying to use it? Is one of the other software offerings, like dvd Cfreator for Mac, ok to use for this? What's the best one?
Please clarify what you mean by "you can't get it to open". Is iDVD on your system or not? If this is a new iMac, iDVD is no longer bundled with new Macs, so the application just isn't there and hence of course can't be opened. You can still purchase it as part of the retail iLife '11 box, though, if you want it, and it would be less expensive than DVD Creator (which I have no experience with), even though you'll get some redundant applications.
Regards. -
I have bought adobe cloud but still can't use photoshop. What to do?
I have bought adobe cloud but still cannot use photoshop. what to do?
What happens when you start Photoshop?
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
On iPad mini, and year ago my iMessage stopped working ! Took it to the store n they reset everything on it! Still couldn't get iMessage to work.
Just decided to leave it because thought I can deal with email n Skype.... Now I need iMessage so just deleted everything n re booted iPad!. Reset everything. Still can't get iMessage and iCloud!!! I'm not too bad cuz I can sync with hubby's iMac. But know I won't have iMessage.Hello ruby10t,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Messages issues:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is toupdate your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Re: I accidently turned off my imessages and now they keep messing up and wont send imessages -
Hi, Hope this is in the right place.
I'm trying to upload photos into facebook from my iMac. I've clicked on the upload to facebook icon in iphoto but just get an error message saying 'error occurred with iPhoto - try again later. I've also had problems lately when I click on a photo to open it I just get a grey screen with an exclamation mark. I've downloaded the latest software but nothing seems to work.
Can anyone help please?
Thanks hopefully,
KarenKaren,
I'd recommend reposting in the iPhoto forum, you can find it at:
https://discussions.apple.com/community/ilife/iphoto -
Help please - 785GM-E65 return from RMA but still KO..
HI,
my 785gm-e65 was broken after the m-flash use.
no POST at all.
RAM, 1 month then came back this morning.
i put the sempron with its rad, the ddr3 and the power switch, then the VGA plug, and ....
no POST ...
clearing CMOS without power plug did not help.
so my question is, may be its not my mobo, but to debug, i need to know what are the minimal things to POST.
should i have POST without CPU and RAM, only keyboard and VGA plugged ?
i tried this and nothing..
HELP me solving this problem, before calling again the seller..
[comment removed]ok, that's what i thought :
CPU+RAM+IGP+power on mobo+power switch
specs:
sempron140
DDR3 noname
antec NSK1480 with PSU
the thing is that everything was working before M-flash, and after that i RMA my mobo
it's coming back and they told it's fully functional...
but still not working, so it's hard to believe that my CPU or RAM is defective, because they were working without trouble.. -
Hello, I was wonderin gif you can please help me, my daughters iPod is disabled and I can't open it.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi,
I am trying to set up my new business email account (3rd party - netregistry from Australia) [email protected] onto my Thunderbird account.
I have new domain with wordpress exploreyogatravel.com
Trying to get new email onto Thunderbird - have set MX record for netregistry on wordpress. Have manually configured mail account on TB (pop/port/ etc) per netregistry instructions). Have spoken to netregistry on a number of occasions - they now feel it is at the TB or WP end.
TB still can't locate settings for my email account when I manually set up as following and I have wasted so much time on this.
(incoming - pop3 - pop.exploreyogatravel.com - 995 - SSL/TLS - normal password
outgoing - SMTP - smtp.exploreyogatravel.com - 465 - ssl/tls - normal password
username incoming - [email protected] outgoing - same)
Please help what I need to do to get this sorted.
Regards
MariskaI think your latest issue will reside in your anti virus package.
Disable email scanning. The setup routine tries to connect to the server 8 ways to Sunday to establish the correct settings. The Anti virus program thinks there is mail coming, steps up to the plate and makes a total disaster out of something that was often not all the pretty anyway. To make matters worse, because of the quick fire scanning some then just decide it is malware trying to spam people and blocks it in the firewall.
Next check the firewall (particularly the pesky Norton one if installed) and ensure Thunderbird has full access to the internet. Auto is not sufficient. That is usually what got us where we are, manually fiddling with settings. -
Activated phone but still can't get it to work.
I have spent all day activating my iphone, set up an account, etc. and now it when I send a text or someone tries to text me it tells me "recipient has insufficient funds to receive message". I have tried to call customer service only to be disconnected every time by your automated service. How in the world can I get some help with this?????
Brooks, I am sorry to hear that you are having difficulties activating your device! You can activate the device right here: http://bit.ly/xB4iTc ! Do any other services work on the device (i.e. Data or Voice)? Please share more details. We are here to help!
SammuelP
VZW Support
Maybe you are looking for
-
Error while uploading the smartforms
Hi Experts, I have uploaded the smartforms for CRM create sales order but when i upload the smartform and activate it gives error message that "A serious error has occurred The transaction had to be terminated' Press the "Yes" button to download the
-
Accessing USB external hardi sik in solaris 10
Hi, I am new to solaris. I have installed solaris on my DELL laptop and it functioning properly. Now I want to use my WD external hard disk whi i connected to the laptop through my USB interface. I have used devfsadm and /reconfigure as stated in the
-
Material workbench displays a zero quantity
Dear All, When I did a Miscellaneous Issue of an item, it was still showing onhand quantity Item Available is 1 No Did Miscellaneous Issue: 1 No Not available in the Transactions Temp (pending Transactions) but now in the Material Workbench the item
-
Excel 2007 Converted to PDF cuts off information
I am using Acrobat 8.1 and I am having trouble converting the information from Excel 2007. Some of the text in the cells are cut off on the ends. Is there some kind of tweak to stop this? Thanks
-
Exit/badi for ME22 line item change
hi gurus, pls mention any exit/badi for ME22 line item changes......