Help please: Issue setting up collecting payments using Pay Pal

Our form is created, our Pay PAL account is created and banking info confirmed. Pay Pal account was registered and permissions granted.
Defined the purchased filelds(1) tied to total amount due...and added a fixed 2.00 handling charge. Basically everything appears okay.
When I do the test the submit button is changed to proceed to checkout(and i see mc, visa, discover logos as well), but instead of going to screen where I can enter Credit card information it goes to pay pal login screen for our account. Something is obviouslly set up wrong. Can you help me with what could be the issue? I was hoping to finish form setup soon.

Hi;
I would be happy to take a look. You can share your form with me following these instructions http://forums.adobe.com/docs/DOC-2462 with [email protected]
I don't' know what exactly you are seeing on the Paypal page, but the correct behavior after clicking "Proceed to checkout" is to be taken to a Paypal login page, it sounds like it is working correctly
Since you are on your own computer where you sign into Paypal it would show your Paypal account/login like this:
In the upper right it shows the amount of the transaction and if you sign in with a different Paypal account (can't sign in with the same account you registered) it will continue with the transaction, alternatively to test you can click the "Check out as guest" next to "Don't have an account" where you would enter payment information.
If something else is happening your can share your form and I'll take a look.
Thanks,
Josh

Similar Messages

How do I make a payment to pay pal or pay pal credit?

How do I make a payment to pay pal or pay pal credit? I've been trying to find where to pay my bill with you for over 2 hours. Please send me a bill in the mail and I'll write you a check. Your new Web Site SUCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I too struggled with finding this option. On your summary page there will be a PayPal balance as well as a, in my case, eBay MasterCard listed. To the right of those options are arrows. Click on the arrow next to your credit card listed. That will bring up a new page where you will see a "make a payment" link. I say, "Shame on them for making it so hard to find!" Good luck!

I can not register in my mind the method of payment my pay pal or credit card. I live in Puerto Rico and does not have to select Puerto Rico

I can not register in my mind the method of payment my pay pal or credit card. I live in Puerto Rico and does not have to select Puerto Rico

- See:
]iTunes Store: My credit card's security code or zip code does not match my bank's records
- If still problem contact iTunes by:
Contact iTunes

How to use pay Pal payment method?

Hello there! i was trying to buy a movie using my pay pal account, but after clcking on the pay pal option asks to click on the link to validate pay pal account, but nothing happens when i click on the link! thanks

Liam is correct.
You have to make sure that you have IPN enabled with the return URL in there and also return URL added to Website Selling preferences.
Your return URL would be http://www.colinpearce.com/PaymentProcess.aspx
Cheers,
-mario

Help Please...I want to use my i pod in my car but poor sound quality

I have a vid 80gb ipod... i got it so i could load my entire cd collection on it. because all my cds are so bulky.
My issue is when i import... then sync the ipod... take it to my car the quality of it playing thru my 12'' subwoofers is horrible. I have a alpine in dash dvd player and 2 12'' subs with amp. (the i pod is connect via a cord direct from the head unit.)
I can play the same song at volune #15 on the ipod and directly from the cd and the sound is not even comparable. The ipod barly makes the subs move but when played thru the cd they move quite a bit. Even on same volume and song?
Any help how i can eliminate that and get the same sounds quality with the ipod as the cd?? please help im getting pretty frustrated.

I tried changing the format and it still didnt seem to be any better. are one of those formats better than the other? because i still had to turn the volume up to get any reaction from the speakers (bass).

Help Please! Setting up SNMP on a ESW 540 48 port switch

Hi There! This is my first post and I have no idea what I am doing when it comes to SNMP. We are trying to evaluate our network performance, so we have downloaded a copy of Solarwind’s Orion and installed it on a server. The topology is as follows.
A SBS 2003 R2 Server running normal programs. A second Server 2003 R2( IP 1.2.3.4) running a proprietary program for the business and, hopefully, Orion soon. The two servers and about 20 XP professional workstations are connected to the esw 540 48 port. An uplink is attached to a consumer grade Linksys that has 5 workstations attached. I was told to install SNMP on the workstations behind the Linksys, so I did with the community name = public, Rights = Read Only, and Accept packets from these hosts = localhost and server 1.2.3.4
I am wondering what configuration I need to do (it is confusing to me) through the cisco web application to set up the switch so that it will communicate with server 1.2.3.4 and the Orion program. We may switch programs in the future (we are not tied to Orion), but it is what we have to set up the switch with. I am mainly looking for network throughput information and usage.
There are just so many options. Any help would be appreciated…. eric

Are you trying to use 2 wireless routers in the network?
Follow this link for cascading (Connecting) a Linksys Router to Another Router .

Help please with Setting up Fonts

Hello, thanks in advance.
By day I work at a studio on an Apple Mac, using InDesign.
By evening I work at home on my Windows 8 PC, using InDesign with the Creative Cloud.
Therefore I'm having difficulties with the transferring of fonts.
Specifically, I have two problems and hoping someone may be able to kindly help on here...
Taking one example, font Gotham.
- I have been able to transfer this font to my Window 8 PC. I have installed all Gotham styles (16 of them - eg Bold, Bold Italic, Regular, Book etc) onto my PC, using the inbuilt Windows 'Font' window in the Control Panel.
- Early indications are good - when I load up InDesign, I can see all 16 of these fonts and can select and use them.
- But I have two subsequent issues
1) The 16 fonts show up as roughly 8 separate Fonts, each with only 1 or 2 styles. At the Studio, in InDesign, I just select 'Gotham', and then there are 16 sub-fonts (styles?) to choose from. On my PC, there are 8 separate fonts, despite all being grouped together as one 'Family' in the Font window on my Control Panel. Is there a way that these fonts can be grouped together on InDesign? Otherwise it's a real pain to use!
2) More importantly, I package my work on the Apple computer, save and take home. When I reload at home it says that it cannot find the 'Gotham' fonts, despite the fact that InDesign shows them! Therefore all fonts convert to the default.
Is anyone aware of these issues and able to help?
Many thanks in advance, greatly appreciated.
Thanks, Simon

When you see fonts on PC with 0 bytes it usually indicates that they are Mac format Type1 or TrueType fonts, and they are not usable on the PC. I've been doing some reading, and you might want to as well, at http://www.typography.com/ask/faq.php (particularly item 32), which explains at least partially why you are seeing different names and groupings across platforms. You may see this even with an OpenType version of the font. You should also read the EULA (http://www.typography.com/home/eula.php). Based on the EULA I would not choose Gotham for any work that was going to be distributed electronically.

Help please with setting volume

I have the new 4.5 os now my phone virbrates and the ringer sound is very low and only rings once and phone virbrates 6-7 time.
Please help me change the setting on the ringer so I can hear the ringer and turn down the number of virbration.
Thank you.
massedixs

Normally they do work but the N96's v10.065 firmware has a bug in it that prevented them from working.
The bug was fixed in the newer v11.018 and v11.101 firmwares.
You can check for an update here:
www.nokia.com/softwareupdate
If you have a network branded phone the update won't be available to you until the network approves it.

HELP PLEASE ISSUES WITH ICLOUD

Ok, so i took my iphone 4s to the apple store and spoke to icloud support over the phone and neither of them could help me...all they did was tell me things ive already tried....i backed up my iphone to icloud and then restored it due to some glitchiness...however, it restored everything from my icloud backup except for my photos and its clearly something wrong with my icloud account but NO ONE can seem to fix my account...can someone please help , I'm so desperate....

Set the iTunes login and password and the e-mail addresses on the iPad iCloud setup to the same as the owner of the Family Sharing and iCloud account, which in this case is you.

Help Please ! -- transform XML to HTML using xslt tag in JSP

Hello,
I have problem to do XSL transform in JSP.
I have an XSL : test.xsl
I have an XML : test.xml
In JSP I have:
<x:xslt media="html" xml="test.xml">
<x:stylesheet media="html" uri="test.xsl" />
</x:xslt>
But It doesn't work the way it suppose to. What is wrong in my code ? I followed the URL http://e-docs.bea.com/wls/docs81/xml/xml_apps.html
Thanks in advance,
Christina

Basically:
    try{
      //Setting up parameters.
      xml=new StreamSource(new File(xmlInput));
      xsl=new StreamSource(new File(xslInput));
      baos=new ByteArrayOutputStream();
      htmlResult=new StreamResult(baos);
      //Transform input(xml, xsl) onto html output.
      TransformerFactory tfactory=TransformerFactory.newInstance();
      Transformer transformer=tfactory.newTransformer(xsl);
      transformer.transform(xml, htmlResult);
      baos.writeTo(out);
      //System.err.println(htmlResult.getOutputStream().toString());
    catch(...){
    }I havent tested and I havent use this for a while, but I hope this can serve as a staring point.
Regards,
OO

Problem. Help please. Server Host Name "already used"

Hello.
This isn't very critical. But I'm getting a little tired.
For some reason, from time to time, it appears the following message:
"The server host name '[my nameXX]' is already being used. It has been substituted by [my_nameXX+1]".
So it keeps incrementing by 1 that index next to the name of the computer...
It seems like the name of the computer stays somehow in the net, in the router or in itself, and when I restart my MacBook, it finds that the name is already used.
Any idea??
Thanks in advance

Hola ElPiter, y una cálida bienvenida a los foros!
The last time I saw this I think it was the Router or Server doing it.
Does everything have the latest Firmware updates? Routers in particulasr can't be trusted for any Auto update/notification of Firmware.

Grouping Credit Entry in Bank Account for Vendor Payments using Pay Wizard

Dear All
We are currently testing Payment Wizard for BACS Payments to Vendors . We have successfully posted payments to Vendor Accounts and to the Bank Account in GL. However we note each Vendor payment is credited to the Bank Account individually even though the Bank will take the payment in one amount for the Payment File Total.
Is it possible to credit the Bank Account with the Total Payment Run value as one amount only so that the credit matches exactly the manner in which the Bank will take the payment ?
I realise that we could process BACs through a dummy GL Account for the Bank and journalise to the Bank Account in total but would prefer to avoid this option.
Regards
Seán Lyons

Dear Seán,
Welcome you post on the forum.
Even though it is not ideal, you may not be able to avoid such additional clearing account since the way B1 works can not be changed.
Thanks,
Gordon

HT204266 Hi, I have a problem with my app store. It doesn't open. Can you help please ?

Hi, I have a problem with my app store. It doesn't open. Can you help please ?

Morning lekogni,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
For more information on this, take a look at this article:
Troubleshooting the Mac App Store
http://support.apple.com/kb/ts3624
Best of luck,
Mario

I keep trying to buy a song on the itunes store but every time I enter my apple id it says "Cannot connect to iTunes store" help please!

I keep trying to buy a song on the itunes store but every time I enter my apple id it says "Cannot connect to iTunes store" help please!

Hello seth53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

HT201210 my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.

Help please: Issue setting up collecting payments using Pay Pal

Similar Messages

Maybe you are looking for