Help Please! -- issue with Mad Catz controller

Can anyone help me out here? I have a Mad Catz Wireless PC Con and I'm having trouble getting it to work. After plugging it into a USB port, when I go to the System Profiler and go to the USB section, the PC Con is listed as hooked up to the USB port like it should be, so I know the computer is reading it properly, but I can't get it to work. When I open the apps I want to use it with, the buttons don't do anything. The obvious reason for this would be that the PC Con isn't compatible with those applications, but that's not the issue here because I have an application (USB Overdrive) that allows joysticks (or controllers or whatever) to be set up to work with any application, and this always worked for me perfectly when I had Tiger. With Tiger I used to use the PC Con with the emulator applications all the time, but now that I've upgraded to Leopard, nothing happens when I hit the buttons. There were no decent instructions with the PC Con. Is there anything I need to to do install the controller first before I can use it or something like that? Does anyone have any ideas for me? Any help is greatly appreciated. Thanks alot.

In your Preferences menu, Type section, what Text Engine Option have you chosen?
-Noel

Similar Messages

HELP PLEASE ISSUES WITH ICLOUD

Ok, so i took my iphone 4s to the apple store and spoke to icloud support over the phone and neither of them could help me...all they did was tell me things ive already tried....i backed up my iphone to icloud and then restored it due to some glitchiness...however, it restored everything from my icloud backup except for my photos and its clearly something wrong with my icloud account but NO ONE can seem to fix my account...can someone please help , I'm so desperate....

Set the iTunes login and password and the e-mail addresses on the iPad iCloud setup to the same as the owner of the Family Sharing and iCloud account, which in this case is you.

Help please! Going mad with CSS in JEditorPane

Hi gurus,
For more then two days now i am trying to get css working with html in my jeditorpane.
This is the stylesheet:
.toc1
font-size:12.0pt;
font-family:Arial;
font-weight:bold;
margin-bottom: 0px;
.toc2
font-size:11.0pt;
font-family:"Times New Roman";
margin-left: 20px;
margin-top: 0px;
margin-bottom: 0px;
.plannerhyperlink
color:green;
text-decoration:italic;
SIMPLE isn't it?
In my JEditorPane constructor I do this
StyleSheet styleSheet = new StyleSheet();
//StyleSheet styleSheet = kit.getStyleSheet();
FileReader reader = new FileReader("/programs/eclipse/workspace/Planner/src/nl/renepetersconsultancy/planner/gui/HTMLHelp/test.css");
styleSheet.loadRules(reader, new URL("file:/programs/eclipse/workspace/Planner/src/nl/renepetersconsultancy/planner/gui/HTMLHelp/test.css"));
kit.setStyleSheet(styleSheet);
setEditorKit(kit);
setPage(url);
I know that the rules are loaded: I printed them to check that. But nothing happens!!!! Almost all layout is gone. If I use the original stylesheet and load my rules on top of them, I can see I have all of them, but everything is layout with the original default style and again my layout is ignored.
HELP Please, anyone. I am desperate (deadline + demo is tomorrow) :-(
Rene'

GL is far easier to do simple CSS than DW, but once you get through the awkward DW interface, it can become clearer. I can only easily see how CSS is created in DW by exporting a GL site that has some already in it. Still not as easy as GL, but we're now stuck with it.
DW still does not handle full fledged CSS unless you have coding experience.
DW has always been more for the programmer than designer (just try asking a question on the DW forum :-)
CS4 seems to be an improvement, but not there yet.

Please HELP! issue with BULK LOAD in FDM 11.1.2.1

Please assist with a solution to the following error!
See log below
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:39] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic158050364335 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic46564644597 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:39] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

Have you read the installation documentation? It appears that you did not take the time to do a basic level of troubleshooting. A simple Google search of the error message provides the root problem as well as the solution.
The forums are intended to be used when you have exhausted other options. Please be mindful of this and contributors time when posting further questions.
I have attached a google search result for the error "You do not have permission to use the bulk load statement."
http://www.google.com/#sclient=psy-ab&hl=en&safe=off&site=&source=hp&q=+You+do+not+have+permission+to+use+the+bulk+load+statement.&pbx=1&oq=+You+do+not+have+permission+to+use+the+bulk+load+statement.&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=1556l1556l0l2633l1l1l0l0l0l0l184l184l0.1l1l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=ebaa3ff8b466872e&biw=1920&bih=955

Please help! Issues with file permissions on the 'Edit' file created by LR for editing in Photoshop?

I am running a Macbook Pro with Mountain Lion. I use a Netgear ReadyNas as my storage device. I can Save, Re Save, Delete and add files without any concern on the ReadyNas from within PS or LR. However when I use the 'Edit in Photoshop" command on LR. I chose the 'Edit a copy with edits', LR creates the new duplicate 'edit' file in the same directory as the original. It opens in PS, I edit as required, however when I save the file to return to LR, I am informed that the file is locked and that I need to edit settings on file or folder, even though the settings are working for all other edits etc. I have had Netgear on this for 3 hours this evening and they cannot see any issues with the setting on the ReadyNas. Does anyone know what permissions are changed or why they are changing when the file is being created by LR?
Sorry bit of a long winded one - but I hope that all makes sense?

h264 is highly compressed and might be the reason your skimming isn't smooth, it may also take a bit more time to convert. I don't have to worry all that much about space so I haven't particularly tried it and can't say whether there are any drawbacks of doing so.
If you google 'mpegstreamclip tutorials', you will see quite a few tutorials you can look at, they do tend to be specific to one task which may not exactly fit in with what you are trying to do, but looking at a few might give you a better understanding of what some options do and when to use them if at all.

Serious DPC latency issues with Xbox One Controller

Not sure if this is the right forum for it, but I'm hoping...
I recently got an Xbox One Controller (with a USB cable for Windows), and installed the x64 drivers for them. I've been using it for a while with no problem, however I recently had to reinstall Windows 7 due to an NVidia driver issue. I am now seeing some
issues with certain games, notably Elite Dangerous and Lord of the Rings Online (which doesn't even use a controller) while my Xbox One controller is plugged in. Terrible lag, sound cutting out. I used DPC latency checker and found that it was spiking bad.
Using LatencyMon I found that USBport.sys was the culprit. I unplugged the Xbox One controller and it was gone.
Here's the catch, I know it's not the USB port or an IRQ issue because if I plug in my Thrustmaster T-Flight HOTAS X to the same port, using the same IRQ, etc. I do not experience any issues. This is related ONLY to the Xbox One controller. Why would the
One controller cause this, and is there anything I can do to fix it? I have looked everywhere.
My PC specs are:
Windows 7 x64 Ultimate
Intel i7-2600k OC @ 4.2ghz
16gb DDR3 ram @ 1600mhz
Nvidia GTX 770 OC 4gb
MSI z68a-gd65(g3) motherboard
HT Omega Claro Halo soundcard
Any help would be appreciated, Thanks!
Edit: I actually had to disable HPET in my bios to even run LOTRO or it would crash my PC, that was until I found out it was the One controller that was causing it.

Hi Marcus,
Considering this issue occurred after reinstalling the machine, please ensure your system is update to date.
Since you have caught the culprit with the LatencyMon, have you tried to update the USB controller or reinstall the USB controller to have a check .
Apart from this ,is the One Controller Driver a manufacturer driver ? If it isn`t official driver ,I recommend you to download the driver from the manufacturer website.
Best regards
Hi MeipoXu,
Thanks for the reply. :) I've been scratching my head with this issue.
I've got all updates done and I used the official x64 Xbox One controller driver from Microsoft. Also have tried update, reinstall the USB controllers under device manager, even tried replacing usbport.sys with a friends copy but they were identical.
What's interesting to note is that this doesn't happen in all games, only certain ones. Since I haven't played either of those games I mentioned after I got the One controller and before the reinstall, I have no clue if it had anything to do with the reinstall
or if it's just an issue with the controller. I posted on those games forums and did not get any replies.
I did notice a lower DPC latency when I plugged the controller into my third-party USB 3.0 controller ports, but it was still spiking up into the reds consistently. I also went as far as to unplug ALL other USB devices, including my mouse and keyboard to
see if that made a difference, and it didn't. Nothing else does this, only the One controller. I'm at a loss. =/

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

HELP: SERIOUS ISSUES WITH BILLING

I have had serious issues with BT since joining their service. Without getting into the issues we had with the BT homehub and other things at the start of the contract with them here is what's been happening.
When we joined BT we explained that we wanted a monthly direct debit. Sounds simple enough but apparently not.
I have phoned over 6 times in the last year to change this. It has still not happened. Several times we were told that on the system it said monthly for it to be then taken out quarterly. In July while we were away this happened again. Only as we assumed that as they had informed us it would definitely be on monthly direct debit that it was the money for the whole of the quarter was not there. So when they took the money for a quarterly bill again. We were charged. It has set back other bills as the money had been eaten up by charges for this. As you can imagine we were quite annoyed. This was not our fault and we felt that BT were not capable of holding our account details without taking money they we repeatedly requested not to. I admit we should have kept a closer eye on our bills account but you don't think that a company will repeatedly do this to you.
After phone calls it emerged that they would not say more than a 'sorry' about this.
The saga then continued. I cancelled the quarterly direct debit at the back and have asked BT to send me monthly paper bills. Then last month our phone and internet was cut off.
We rang up and suggested that due to the mix up could they add the money we owed to our monthly bills and we'd pay this off on top of the monthly bill. Despite that the reason we owe this at all is not through any fault of our own but through theirs. The money would have been available had they taken it as repeatedly requested.
We were on the phone for 1hr and 10 mins ( 21st September) to three different people. No, they said must be paid in 10 day. My partner only managed to get money off this in about an hour - the point being we were happy to pay the whole amount over a year and were not allowed. We asked to speak to a manager after 1hr and 10 and were put back to the start of the queue. 16 minutes later the man we spoke to said a manager named Samantha would call us back. No-one did.
On the 22nd of september a rather annoyed me called back and repeatedly requested a manager - sadi would be put though. After 17 minutes the phone went dead.
Called later on same thing phone went dead after requesting a manager at 10 minutes.
Later on called for 28 minutes and told the call centre the issue £20 deducted from amount but said it had to be paid in ten days and a bill would be sent. Was told that the internet would be reconnected that day.
23rd September was hung up on after thre minutes on requesting why the internet had not been connected.
Phoned later. The man that I spoke to said that no action had been put through to reconnect the internet. He would do it and it would be through by 5pm.
My partner phoned at 8pm when the internet still had not been reconnected. It was done the next day.
Today BT phoned to ask if I had the bill ( Not sent) and tell me that the line will be disconnected by the end of the day. i explained that we were in the middle of complaints procedures with them. She looked on the system and said that there were no notes on the account. I asked for a manager and then asked for this managers superior. She put me through to someone that when questioned was not her superior and half way through my explanation of this....you guessed it..... the line went dead.
I am so annoyed that we've been fine with bill paying and as of their mistake we're now in debt to them and feel like we can't sort it out as there is not anyone who will listen or help. Has anyone had similar probelms or does anyone have a number for their English call centre?
Jess

hi Jess,
I am really sorry that you have had so much trouble trying to get this sorted out. I'll get this straightened out.
Could you drop me in an email please to the address in my profile with your BT account and telephone number along with a link back to this thread.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Help please problem with export

I had some problems with safari on my imac (OS X) so I did some "repairs" I ended up deleting some keychains and I believe that is what cause the problem I'm having. However I don't know how to fix it.
When I try to export RAW images from my Lacie rugged external hard drive to the desktop into jpg I get this error...
"An internal error has occurred: ?:0: attempt to index field 'rootFile' (a nil value)"
I have a deadline very soon (in about an hour) and need help please.

Fantastic, these things always happen at the most inconvenient time!!!
When you've got the job out of the way reboot the Mac and try the export to desktop again. If it is still broken then in Disk Utility run Repair Permissions on the Mac and La Cie.
Who do I send the bill to???

Can someone help please - problems with ios7 update

Hi can someone help please since updating with ios7 on my iphone 5 i message will not work and I have an extermely poor battery life I can watch it going down.

Hi can someone help please since updating with ios7 on my iphone 5 i message will not work and I have an extermely poor battery life I can watch it going down.

Need help troubleshooting issues with Adobe Reader X

Hello,
Recently our company upgraded multilpe computers to Reader X. Initially we installed version 10.1.0. Ever since our users on X have been experiencing problems. We are seeing three different issues.
1) A user will fill out the PDF and click print. At that point a popup appears with the message "Adobe Reader has encountered a problem and needs to close. We are sorry for the inconvenience." The user has the choice to click on Debug or Close. Clicking Debug doesn't appear to do anything.
2) Clicking on a PDF in internet explorer will launch Adobe Reader and a progress bar shows on the screen indicating that the PDF is loading. The progress bar goes away and the user is left looking at a grey screen.
3) When attempting to open a PDF the user recieves this message "The instruction at "0x00720065" referenced memory at "0x00720065" . The memory could not be "written."
In every situation the only way to get past the problems is a restart of the PC.
As an attempt to resolve the issue we tried upgrading several users to Reader version 10.1.3. This was done by completely uninstalling version 10.1.0 and then installing 10.1.3. This did not have any effect on the problems.
Can anyone here offer and suggestions?
Thank you

Hello,
1. The OS on which you are seeing these issues.
Windows XP SP3
2. The method of deployment of the 10.1.3 update. Was it done via SMS/GPO/SCUP?
Originally 10.1.0 was installed remotely using a program PSEXEC. Once the errors began occurring 10.1.0 was uninstalled manually and 10.1.3 was installed using a copy from your ftp site.
3. Can you try and update any one of your systems to the latest version of Reader i.e. Reader 10.1.4 and see if it solves the problem.
We have upgraded one machine to 10.1.4 using the Check for Updates function within Reader 10.1.3 and are looking for any ongoing issues.
4. Which browser are you using to render the PDFs. Is the issue seen with internal links alone or with all links. Can you try and see if the following opens on one of the faulty machine: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_Re leaseNote_10.1.3.pdf<http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_10.1.3.pdf>
We are using IE 8. The issues are seen with both internal and external links as well as stand alone PDFs. No one could open the link you sent but we could open: http://helpx.adobe.com/content/dam/kb/en/837/cpsid_83708/attachments/Acrobat_Reader_Releas eNote_10.1.3.pdf on a faulty machine.
5. If suggestion# 3 doesn't work, can you also try and uninstall the installation on any one of the machines manually (i.e. via Control Panel > Add/Remove Programs or Programs and Features depending upon your OS) and install a fresh copy of Reader 10.1.3 (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.3/en_US/AdbeRdr1013 enUS.exe<ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.3/en_US/AdbeRdr1013_en_US.exe>) and see if it solves the problem. If it does, then it may be an issue with the Deployment methodology followed.
Already tried this. See answer to suggestion #2
Thanks,
Adam Behsmann
Application Support Analyst
Exchange Bank
(707) 541-1044

HELP: Mail issues with Leopard

I have been having an issue with Mail since I upgraded to Leopard. I am getting the following message when I wake my Mac from sleep:
There may be a problem with the mail server or network. Check the settings for account “[email protected]” or try again. The server error encountered was: The server “mail.mac.com” cannot be contacted on port 143.
Does anyone know why this might be happening? Mail seems to work fine otherwise...

I had update problems with my PowerBook G4 as well. In my case the update stalled at Writing Package Receipt-it was installing 4 packages so I am not sure which one failed-but about this Mac showed 10.5.2 version-however the receipts were not anywhere -either in Software Updates/Installed Updates or in Library/Receipts/boms or in Console Logs-therefore, I concluded that the Update was only partial. I was unable to update it to completion using the independently downloaded Combo updates. So........., I restarted with the install DVD and did an Archive and Install (it reverted back to 10.5), then ran Software Update. It installed 7 items some of them relating to iTunes, iWork, iLife, QuickTime etc, including the combo 10.5.2 updater. It took an hour or two but everything finally installed. After that I ran Software Update again and it installed the Graphic Update. Now everything is fine except Permissions Verify/Repair takes quite long.

Please help - performance issues with Lr 2.3

I really hope some user/s or Adobe support members could help me with tweaks/suggestions to improve Lightroom 2.3's sluggish performance on my computer.
First of all I have read about 100 different forum topics this morning, have used the forum search extensively and I cannot find any one topic which talks about different methods for improving performance. So I really have tried to find the answer before asking for help and I have done a lot of googling to try and find some simple answers but after all this reading I am more confused than when I started out.
Let me first explain what I am experiencing and I will try and be as detailed as possible.
1 - When I browse the library it is incredibly slow rendering the thumbnail previews. I found a topic which talked about degfragging the LR catalog using sqlite and contig, I did that and it made no difference to performance.
2 - I left my machine running an entire day to render the 1:1 previews thinking this would help me with the slow thumbnail issues but it made no difference. It is however faster now when I double click and image and get the immediate 1:1 preview :)
3 - I have turned off the Automatically write changes into XMP, suggested on another topic, that made no noticeable differences to performance either.
4 - A few months ago when I was still running 2.1 I found a topic either here or on Google that told me to delete the entire previews folders and let LR recreate them from scratch, I did that back then and that did not make any difference either, turned out to be 24 hours of waste time for me.
5 - I tried changing the following settings under catalog settings (has not improved anything):
size: 2048 Pixels
quality: High
automatically discard 1:1 previews: Never
6 - The only slow performance I am experiencing in LR is the thumbnails and this slows down my workflow dramatically. Everything else in LR seems to be quite fluid and usable and fast. I notice many users have complained about the slow thumbnails issues and I was praying that 2.3 was going to sort this out.
7 - I have also noticed that when scrolling up and down the thumnail list it sometimes uses more than 1 processing core and then sometimes not and then when I stop scrolling up and down the thumbnails and leave it alone for 5 seconds suddenly all 8 processing cores spike to around 50% usage with processing "something".
8 - I have tried making my thumbnail previews different sizes, also makes no difference really, unless I go to the smallest size and then it seems ok but then it's hard to see what's going on at all with thumbnails that small.
9 - Lightroom is only using up 1.1 GB of available memory so I do no think the slowness relates to memory and I am running my memory in a proper DDR3 configuration.
10 - I have tried playing with my graphics card settings (below) but it does not seem to help no matter what I try.
11 - Overall it "seems" that Lightroom is trying to re-render thumbnails continously, I know technically this may not be true but as an end user this is how it feels to me.
My computer specifications are as follows:
Intel i7 965 Extreme Edition (not overclocked)
Intel DX58 Smackover Motherboard
6GB DDR3 Ram (not overclocked)
GEForce 9800GT Video Card (with WHQL driver)
SATA 2 1TB Seagate Drives
Windows Vista X64 (SP1)
Lightroom 2.3 X64
NEC 30" Display running at 2560x1600 resolution
The way I have LR configured on my PC is as follows:
- Program files installed on main C drive which is a 250GB partition on a 1TB Seagate Sata 2 drive with 190 GB Free space all the time.
- Lightroom catalog is on my E drive which is a 1TB Seagate Sata 2 drive
- Camera Raw Cache is set at 10GB and resides on the same E drive as the LR catalog
- My E drive has 100GB Free Space
- I have tried tweaks to the video card settings to be Lightroom spe

Hi Don
Thanks for the reply, I have tried changing any/all settings on the card set to performance versus quality and still it has no effect. I just got the latest video driver for the GT9800 which was released on the 3rd of March and that has no effect either. I tried loading the 32 bit version of Lightroom without any improvement to speed on the thumbnails whatsoever so that rules out the possibility of it being something to do with 64-bit.
I read an Adobe knowledgebase article saying that the Nvidia control panel conflicts with certain Adobe software but they do not say how to turn it off and I also cannot even find the answer to that on Nvidia's forums either. So I still cannot say whether or not the Nvidia control panel is the problem because I cannot disable it.
I phoned a friend this morning who is running Lightroom 2.3 on a simple Core-2 Duo machine and his thumbnails render in half the time that mine do and my hardware is top of the range stuff in comparison so you can imagine my frustration with this thumbnailing issue. My friend also has an Nvidia card 8800GT I think.
I have spent so much time on this and I am no further to a solution and this blurry thumbnail issue is seriously messing with my eyes and it does not make for a very pleasant user experience.
What concerns me is that while Lightroom is idle and the machine is idle Lightroom is not doing anything in the background like rendering thumbnails. It only starts rendering them once I scroll down a page, no doubt by design but for more powerful machines there is a lot of processing ability going unused. The thumbnails on the filmstrip render a lot faster compared to grid view but their rendering state is also not retained and once I have scrolled past 100 images and then scroll back they are all blurry again and I have to wait for them re-render all over again. All this re-rendering of thumbs is a really big waste of time.
I also noticed something else interesting this morning, I opened task manager and left it open while I was scrolling thumbnails (continuous scrolling without waiting for them to render sharp) and only one core was being used to do this processing, I tested this multiple times and left it open while I scrolled through 5000+ images and only one core the whole time was being used. Only once I stopped scrolling and Lightroom began it's rendering of the thumbnails (about 10-15 seconds after stopping scrolling) did it only then start using multiple processors, I'm not sure if that has something to do with anything and memory wise I have 4.2 GB of available memory and Lightroom is only using about 425 Mb of memory.
I have changed the size of my thumbnails to below halfway on the slider and that made only a slight difference, although now they are so small on this 30" screen that I am now suffering even more eye strain as a result.
I am busy loading LR 1.x to confirm whether any of these behaviours existed back then and will report back.

PLEASE HELP! issues with syncing

o-kay. i am actually on vacation right now, but my ipod is a huge part of my travels and i'm having some problems.
i purchased a 30GB ipod video off of ebay and saved quite a few bucks in march. i haven't had any problems with it so far. it has worked like a dream!however, over the past few days it has been crashing and freezing up. so far, i have been able to restore it, and reset it so it doesnt freeze, but i can't get it to sync all my music from my itunes library. this is causing me stress.
any suggestions as to what the problem is or how i can fix it?
ibook g3 Mac OS X (10.4.8)

FIRST click on “reset settings” (if it is grayed out and does not allow you to reset; just go to next step) Click on Configure settings; check off calendar; as soon as you check it the next screen just pops up It says select a device application; then scroll and select Microsoft Outlook; Click Next and then pick which way you are going to sync If it is the first time just use One way sync from outlook to device. Click next; Click transfer only future items selected; click next then finish; Should see the final screen with top box out of three checked off. Click ok Click sync at bottom right of page. I found that if I went to slow (since I was making this sheet) that I would get the error message sometimes. I would just start over; FIRST ALWAYS RESET SETTINGS; then just follow all the steps again . Then should sync Once it is finished you will be back where you started from It is a good idea to click on Reset settings now before you close out. When you go in again click follow the steps from the top of the page. FIRST click on “reset settings” (if it is grayed out and does not allow you to reset; just go to next step) Click on Configure settings;

Please help. Issues with opening a .prm file.

I am trying to open a Win-CNC.prm file and all that happens is Adobe Premier Elements program pops up and that is it. What am I doing wrong?

Because it's not a frequently asked question, we do not have the Facebook section in the FAQ document. Sorry about that.
There is no direct way to get a PDF document shown in the Facebook window into Adobe Reader for iOS. You need to go from (1) Facebook to (2) Safari (web browser), then to (3) Adobe Reader on iPhone (and iPad as well).
In the Facebook page showing a PDF document, tap the Share icon in the bottom toolbar.
Select "Open in Safari" from the menu that appears.
In Safari, tap anywhere in the document to show the toolbar (below the top toolbar).
Tap "Open in..." (label) in the toolbar.
Tap "Open in Adobe Reader".
Please let us know if it doesn't work for you.

Help Please! -- issue with Mad Catz controller

Similar Messages

Maybe you are looking for