Help please. Just upgraded my xperia s to IC andriod. Favorites contact not working
Hi there
I have just upgraded my xperia s to the latest software release. Can some tell me how to add contacts to my favorites list please.
I assume you tried searching for third party app?
I hope you do
no probs
Similar Messages
-
Just upgraded to Yosemite from Moutain Lion. Want to go back as it refuses to run some programmes
Yosemite/ OS X Mavericks: Revert to a previous OS X version
-
I just upgraded to mac osx 7 and my speakers do not work
I just upgraded to Mac OSX7 and now neither my internal or external speakers work. Anyone have a suggestion? I've already reviewed the settings and they appaer normal.
Make sure the Mute button is not selected in System Preferences > Sound
And try Resetting the System Management Controller (SMC) -
Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks
Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite. -
I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding." I checked the catalogs and see that lrcat-Journal and lrcat-Lock have been created every time I try to open. I have a backup from the first day I upgraded, but Lightroom doesn't want to access it. Should I reinstall?
Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
It would help to know your OS. -
Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me:: -
I just downloaded iTunes 11.1 and my iTunes Radio is not working. HELP!
I just downloaded iTunes 11.1 and my iTunes Radio is not working. When I go to play a station it says "We could not complete your iTunes Store request. You are not authorized to access the requested resource. There was an error in the iTunes Store. Please try again later."
I've got this from another forum and works perfectly:
1. Go to iTunes
2. Log out of your Apple ID
3. Log back in. -
I just upgraded to the 5s but the sales lady did not restore from my last backup with my 4s. How do I get my pictures and settings restored? I cannot seem to get it to give me that option. Can anyone tell me what to do? Thanks so much!
If the phone has already been set up, you will need to go to Settings > General > Reset > Erase All Content and Settings to be able to go through the setup again. This time use Restore from Backup.
This will walk you through the setup screens:
Getting Started and Get-Started Apps -
Just now i replace the 5s mother board but could not work touch id pls help me.....
just now i replace the 5s mother board but could not work touch id pls help me.....
if you have replaced the logic board on your phone, by yourself then that is considered modification and can cause other parts to fail due to ESD issues or just damage from handling parts
-
After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?
Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope. -
Have just downloaded iSO6 to my ipad and now facetime will not work properly. It will take incoming but will not allow to make a call. Could anyone offer suggestions to the problem please?
Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari -
After upgrading from 4.6C to ECC 6.0 templates not working in smartform
Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
AbhishekHi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran -
ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference
Hi, JoJoEvs.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue. After all steps related to your sound issue have been processed, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jason H -
I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.
hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
John -
After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out
After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out. There is no function at all.
Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo. It was suppose to show you how much data you use to help keep you within your limits. If you have downloaded this, go through your settings and delete it and it will fix the problem. At least it did for me. I can now send photo's to non Iphone users via text no problem.
Maybe you are looking for
-
Incremental partition processing with changing dimensions?
today i tried out an incremental processing technique on my cube. I have a partition by date which had 100 rows and an account dimension which had 50 rows. i executed a process full and then added 10 rows to the fact and modified 2 rows in the dimens
-
All, I am in the process of firming up our PI architecture. I am unsure of how the setup will work in the DMZ. The picture at the bottom of the link shows two Integration servers B2B and A2A in different zone. http://help.sap.com/saphelp_nw04/helpda
-
Retrieving lost "Sent" messaages
Background: I recently purchased an iPhone and found I couldn't create any folders in which to save incoming emails. I found out that folders must be created on my computer and can only be used on the iPhone if I converted to an IMAP account. I phone
-
Oracle startup with some specific tablespaces
I am trying to start a oracle 9i database in Linux(Redhat 8.0). During startup it says, one datafile of one of the tablespaces is missing.It can't open the database. How to start oracle with out that tablespace, i.e., I want to startup the database w
-
WLS6.1 - to - WLS 6.1 using t3 protocol
Is it possible to make a call using t3 protocol ( without using iiop) from WLS6.1sp2(#1) to WLS 6.1sp2(#2), which are NOT in cluster A) servlet on #1 to ejb on #2 B) ejb on #1 to ejb on #2 The WLS to WLS example talks about using iiop for WLS6.1sp2 t