Help please MSI GHOSTGS60

I can play games fine on battery but as soon as I plug the charger in my internet cuts on and off and cannot play games and when I unplug it it plays fine. I have played around with the power setting and adjusted to the same as battery settings but it still did not work I only purchased this a couple days ago and I dunno what to do. thanks

I am connected via wifi I can play games like league of legends with the charger in without dropping out but I suffer extreme lag but titan fall and team fortress 2 I cannot play with the charger connected because it keeps disconnecting I ran a windows ping test and with the charger in I have up to 20% packet loss and when the laptop is running on battery I have 0% packet loss. could it be my charger possibly? thanks
ps league runs fine when on battery aswell

Similar Messages

Help Please MSI 6600GT Freezing In Games

hi i have a pentium 1.8 1g ddram 120 gig HDD and iv recently bought this card yesterday and its been freezing alot mainly in games iv updated to latest drivers but it still freezes and i get a error blue screen file nav_display or something like that error and i had to reboot by pressing button and windows gave me these links
http://oca.microsoft.com/en/response.aspx?SGD=1ff62710-32d7-456b-9cea-c54fc9e2706e&SID=11
can anyone help please ? fustrating buying a brand new card and it crashing like this ..

Please read this first
Suggestions on posting and getting better answers
What card was in it before.
PSU specs and more details on your system please.

When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.

Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.

Hi,
Can you pls. provide more details of the issue?
OS/Platform
It would be great if you can provide the MSI logs for repair from the %temp% directory.
Thanks,

Accidentally deleted bonjour from my computer. iTunes will not open. Help Please.

Accidentally deleted Bonjour from my computer. iTunes will not open. Running Windows XP. Help please.

Uninstalling and then reinstalling your iTunes should also get your Bonjour reinstalled.
For the reinstall, use an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
... or you could get it back via your Apple Software Update for Windows.
If you'd prefer not to uninstall iTunes, try the following procedure.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!

Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!

hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Little help please with forwarding traffic to proxy server!

hi all, little help please with this error message
i got this when i ran my code and requested only the home page of the google at my client side !!
GET / HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
Accept-Language: en-us
UA-CPU: x86
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727)
Host: www.google.com
Connection: Keep-Alive
Cookie: PREF=ID=a21457942a93fc67:TB=2:TM=1212883502:LM=1213187620:GM=1:S=H1BYeDQt9622ONKF
HTTP/1.0 200 OK
Cache-Control: private, max-age=0
Date: Fri, 20 Jun 2008 22:43:15 GMT
Expires: -1
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Server: gws
Content-Length: 2649
X-Cache: MISS from linux-e6p8
X-Cache-Lookup: MISS from linux-e6p8:3128
Via: 1.0
Connection: keep-alive
GET /8SE/11?MI=32d919696b43409cb90ec369fe7aab75&LV=3.1.0.146&AG=T14050&IS=0000&TE=1&TV=tmen-us%7Cts20080620224324%7Crf0%7Csq38%7Cwi133526%7Ceuhttp%3A%2F%2Fwww.google.com%2F HTTP/1.1
User-Agent: MSN_SL/3.1 Microsoft-Windows/5.1
Host: g.ceipmsn.com
HTTP/1.0 403 Forbidden
Server: squid/2.6.STABLE5
Date: Sat, 21 Jun 2008 01:46:26 GMT
Content-Type: text/html
Content-Length: 1066
Expires: Sat, 21 Jun 2008 01:46:26 GMT
X-Squid-Error: ERR_ACCESS_DENIED 0
X-Cache: MISS from linux-e6p8
X-Cache-Lookup: NONE from linux-e6p8:3128
Via: 1.0
Connection: close
java.net.SocketException: Broken pipe // this is the error message
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:115)
at java.io.DataOutputStream.writeBytes(DataOutputStream.java:259)
at SimpleHttpHandler.run(Test77.java:61)
at java.lang.Thread.run(Thread.java:595)
at Test77.main(Test77.java:13)

please could just tell me what is wrong with my code ! this is the last idea in my G.p and am havin difficulties with that cuz this is the first time dealin with java :( the purpose of my code to forward the http traffic from client to Squid server ( proxy server ) then forward the response from squid server to the clients !
thanx a lot,
this is my code :
import java.io.*;
import java.net.*;
public class Test7 {
public static void main(String[] args) {
try {
ServerSocket serverSocket = new ServerSocket(1416);
while(true){
System.out.println("Waiting for request");
Socket socket = serverSocket.accept();
new Thread(new SimpleHttpHandler(socket)).run();
socket.close();
catch (Exception e) {
e.printStackTrace();
class SimpleHttpHandler implements Runnable{
private final static String CLRF = "\r\n";
private Socket client;
private DataOutputStream writer;
private DataOutputStream writer2;
private BufferedReader reader;
private BufferedReader reader2;
public SimpleHttpHandler(Socket client){
this.client = client;
public void run(){
try{
this.reader = new BufferedReader(
new InputStreamReader(
this.client.getInputStream()
InetAddress ipp=InetAddress.getByName("192.168.6.29"); \\ my squid server
System.out.println(ipp);
StringBuffer buffer = new StringBuffer();
Socket ss=new Socket(ipp,3128);
this.writer= new DataOutputStream(ss.getOutputStream());
writer.writeBytes(this.read());
this.reader2 = new BufferedReader(
new InputStreamReader(
ss.getInputStream()
this.writer2= new DataOutputStream(this.client.getOutputStream());
writer2.writeBytes(this.read2());
this.writer2.close();
this.writer.close();
this.reader.close();
this.reader2.close();
this.client.close();
catch(Exception e){
e.printStackTrace();
private String read() throws IOException{
String in = "";
StringBuffer buffer = new StringBuffer();
while(!(in = this.reader.readLine()).trim().equals("")){
buffer.append(in + "\n");
buffer.append(in + "\n");
System.out.println(buffer.toString());
return buffer.toString();
private String read2() throws IOException{
String in = "";
StringBuffer buffer = new StringBuffer();
while(!(in = this.reader2.readLine()).trim().equals("")){
buffer.append(in + "\n");
System.out.println(buffer.toString());
return buffer.toString();
Edited by: Tareq85 on Jun 20, 2008 5:22 PM

Help please, getting error on backup of PSE 12

I have researched far and wide. " Error Encountered writing file(s)B:\Users\Peter\pse12\My Catalog 1 1\catalog.pse12db"
This was happening also with PSE 11, so I purchased PSE12, same error. This is a clean install, on a month old PC, Win 8.1, i5 3.4Ghz 8GB MSI Mobo z87g45.
Back up progress bar box opens, but remains a white space until the error message comes up around a minute later.
I have tried everything on Elements Help "Troubleshooting catalog backup, upgrade..." Getting frustrated. Help Please.

LifeafterGE
You have posted in the wrong forum if your program is Photoshop Elements (any version). You have posted in the Premiere Elements Forum whose focus is video editing. But, it does come with Elements Organizer which does carry with it the considerations of backing up the Elements Organizer catelog.
Nonetheless, the Photoshop Elements users are great resources on this topic.
So, either repost your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and then move it from here to there.
http://forums.adobe.com/community/photoshop_elements
I suspect that you will get a lot of replies in the Adobe Photoshop Elements Forum. If not, I will put on my Photoshop Elements hat and look into your issue after we exchange information on how and what of your backup. Curious...in Elements Organizer 12, are you trying to backup a catelog which is an Elements Organizer 11 catelog converted in Elements Organizer 12?
I will be watching for your progress there.
Thanks.
ATR

Help please!!! with AMD 3200+

Just Purchased a brand new xp 3200+ to run on my K7N2 Delta ILSR, I had been running a 2500+, Anyway at this point the system is totally unstable at default (200) mhz fsb, It will not even last one cycle with sisoft sandra's burn in wizard and reboots just logging into the system.
However when I set it up to run bios setup defaults it's solid as a rock. But it's recognizing the processor as an xp 2500+ and running at 1.8 ghz, with the 333 mhz fsb. I originally thought this might be a ram problem, so I took out each stick and tried to run it at 3200+ one at a time, same problems all over again. tried turning off agp fast write, loosening the memory timings, every thing i can think of.
Do i need to re-install windows??? any help at all would be greatly appreciated I would hate to think i just paid all this money and have to run at 1.8 ghz
My System:
MSI K7n2 delta l ilsr
xp 3200+ barton
1.5 ghz pc 3200 ram micron technology dual channel 400mhz
slk 900a heatsink, 3000 rpm fan, 43c idle 48 load
PSU hercules 420w
windows xp professional sp 2
Bios version 7.8
seagate barracuda 120 g primary hd
maxtor 80g diamond max back up
video card nvidia geforce 5200 with 256 on board mem

As I said in the post, I tried Loosening the memory timings, to no avail, Heat is not a problem here, temps are staying in the 40's at default settings, I have a huge leaf blower fan on the processor (tornado) along with the slk 900a bios is 7.8, I am not concerned with Sisoft sandra scores at all, the only reason I ran it is to try to determine the problem by putting first the processor and then the memory, then the video under load, when I say it's unstable I mean it's rebooting when I'm trying to type this message, I tried to include as much info as possible in this post, about the system, including the part about the ram, timings i've loosened them to 11,4,4, and the cas latency to 3,
kudos to the guy who said to bump the voltage, i'm at 1.7 cpu core and it's only restarted once in the last hour so it seems to have stabalized a bit I just think it's ironic, that I went from the 2500+ to this cpu so I wouldn't have to OC to get it above 2g and now tha't what i'm having to do,,,,it has however upped the temps about 5 degrees to 48 idle, and 53 load, how high can i take the core voltage without damaging the cpu???
Help please!!! with AMD 3200+
Just Purchased a brand new xp 3200+ to run on my K7N2 Delta ILSR, I had been running a 2500+, Anyway at this point the system is totally unstable at default (200) mhz fsb, It will not even last one cycle with sisoft sandra's burn in wizard and reboots just logging into the system.
However when I set it up to run bios setup defaults it's solid as a rock. But it's recognizing the processor as an xp 2500+ and running at 1.8 ghz, with the 333 mhz fsb. I originally thought this might be a ram problem, so I took out each stick and tried to run it at 3200+ one at a time, same problems all over again. tried turning off agp fast write, loosening the memory timings, every thing i can think of.
Do i need to re-install windows??? any help at all would be greatly appreciated I would hate to think i just paid all this money and have to run at 1.8 ghz
My System:
MSI K7n2 delta l ilsr
xp 3200+ barton
1.5 ghz pc 3200 ram micron technology dual channel 400mhz
slk 900a heatsink, 3000 rpm fan, 43c idle 48 load
PSU hercules 420w
windows xp professional sp 2
Bios version 7.8
seagate barracuda 120 g primary hd
maxtor 80g diamond max back up
video card nvidia geforce 5200 with 256 on board mem

Help please, with port forwarding settings

I have an MSI RG60 wireless router (Ethernet hard wired to my XP Home PC) and don't know what settings to use for port forwarding, to enable my WinMX and BitTorrent clients to work successfully.
I have the port numbers, and assume that this information goes in the Service Port box, i.e. 6699, or 6881-6889.
I know which ports are TCP and which are UDP, but I don't know what IP address to enter or which Common Service Port type to choose. Can anyone help please?
I'm pretty sure that other settings in my PC are OK as I have successfully been running a Belkin router for a couple of years, and have only replaced it with the new MSI unit due to reliability problems.

It does indeed have port triggering, but it wants incoming and trigger port protocol info, along with trigger and incoming port numbers.
How can I type ipconfig into either of teh clients...WinMx or Bit Torrent?

Keep getting BSOD and need help PLEASE ! P7N Platinum Sli

Hey guys ,
Can someone please help me ? I have been getting BSOD for along time now and then i get a windows recovered from serious error when it boots back up , i always send in the error report and usually it says a driver problem but i have re-installed every driver servral times and and re-formated my pc sevral times to try and get it to run right . Now i finally got a different report back from windows error reporting saying a "Non Compatable BIOS is the cause " here is the error report screeny i took and uploaded to flickr http://farm4.static.flickr.com/3538/3349882297_4a3194e3df_b.jpg and this is another screeny in flickr of my BIOS in MSI Info View http://farm4.static.flickr.com/3445/3349882397_ef282a33d2_b.jpg , i believe i have the newest BIOS installed and the correct one also and have been running that version for along time . When i first setup this system i could not get my Q9550 to boot at all with this mobo till i updated the bios to the P0B6 but have never had it stable from BSOD . My Specs are Q9550 "Core 2 Quad Yorkfield SLAWQ Q9550 333 2.83 12M " / MSI P7N Platinum 750i SLI / OCZ Vendetta CPU cooler / 4GB- 4x1GB OCZ FLEX DDR2 1150 / OCZ GameXtreme 1010W / 2x - XFX GTX260 Black Edition in SLI / 1TB Seagate HD .
Also i had just tried the live update but it says there is no new updates for bios , when i first did the update i used a 3.5 floppy and flashed the bios to the ver i currently have now because there was no way for me to use the live update with XP Pro 64bit , Now im running Xp Pro 32bit w. SP2
Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ???

Quote from: NovJoe on 14-March-09, 11:22:13
I suggest that you clear CMOS and use flash it to the BIOS v1.1 under the MSI website for your board and see how it goes.
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1373
LOL thats funny !!!!! 1.1 is what came installed on the mobo and is not compatable with the Q9550 it will never boot to bios using 1.1 with a quad core ! Thats the first problem i had thats why i explained all the steps i had to go through to get this mobo / cpu to boot with the help from MSI tech support !

Hardware Interrupts HELP please

Hello,
My problem is this: when i open my PC everything works perfect, but when i execute a "heavy" programme(like games or a full system scan etc) after a while the CPU reaches 100% and the system is responding really slow(30-45 sec after the mouse click).I have downloaded the processexplorer and clearly the problem is the Hardware Interrupts.
I had the same problem 6 months ago, i formated the HD and everything was normal again.Yesterday the Hardware Interrupts started again.I couldn`t find anything to do(i`ve searched a couple of forums) so i decided to format the disk again hopping that everything was going to fix again(at least for some months) but unfortunately today and after trying to play Command and Conquer Tiberium Wars the system crashed and (based to processexplorer) the hardware interrupts was the problem again.
Somebody help please and thanks for your time

First of all thank you very much for your very quick response.
I also thought that maybe the Video Card or the CPU temperature is increasing and causes the hardware interrupts but the CPU temperature doesn`t go higher than 37-38 degrees Celsius and the SYS temp is 1 or 2 degrees lower. For example right now i am copying some files from a DVD and the Hardware interrupts are using avg. 30% of the CPU and the CPU temp is avg. 32 degrees Celsius and the SYS temp is avg 29 degrees Celsius. The temperatures are taken from the Core Center programme from MSI.If there is any other way to see my CPU`s and system`s temperature please tell me to check it.
As for the Hard Disks I am checking now one of them and there may be a problem.I will do some tests and i will inform you as soon as i can.
Thank you very much

Help with MSI K8N Neo Platinum

HELP please- motherboard MSI K8N Neo PLATINUM: I tried to take away the backplate for the heatsink (on the back side of MB) in order to install the zalman HS beafore i read the forum (use a fan...) and the worst of all happend:
I scratched the back surface!! the scratches are minor, that is 4 scratches half a milimeter long each and not deep but i can see the copper of some lines leading from the memory slots to the processr. My question is : can I try and build the computer on that motherboard anyway or better buy a new one? is there a risk of dammaging other components? oh god what a mistake!

Make sure the new backplate is non-conductive. The backplate for the Hyper 6 has a non-conductive sticker on it. Make sure to keep it on if youve got one... If the lines are exposed even with the back-plate on perhaps you should cover them with some non-conductive (100% non conductive!) tape or something.
Then it doesnt matter if they are exposed, as long as they are ok.
A good tip, which got when i was removing my backplate, is to use a blow dryer to heat it up and the remove it with your fingers. That way youll also notice if it gets to hot
The glue gets sticky at blow drier temps. And pls, dont singe the MB with your blow dryer, you only have to make it hot, and if you cant touch it, how can you remove it with your fingers?
I guess theres no way of telling if you have a serious prob and no way to tell if your cpu will be ok. I guess you could (?) try and start it wíthout anything (cpu, mems) but a PSU, and then, if it (and maybe the PSU) goes "!Pfsssssss!" or "bang!", youll now you will have to replace it.
I put a screwdriver through an asus board once, and it still worked...

MOVED: BIOS Overclocking, help please!

This topic has been moved to Overclockers & Modding Corner.
BIOS Overclocking, help please!

Quote from: MurdoK on 13-January-06, 17:23:55
Hello !!
Please tell us which Motherboard you are talking about ?
Greetz MurdoK
I'm an idiot!!! I forgot to post which mobo I'm using!!! jajajajaja
I'm using an MSI K8N NEO4 PLATINUM
Greets!

K9N2 SLI Platinum. Help please.

-AMD Athlon X2 Processor 2.9GHz Dual-Core.
-MSI K9N2 SLI Platinum NVIDIA nForce 750a SLI ATX AMD Motherboard
-G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit
-EVGA GeForce 9800GT 1GB DDR3
-500GB Western Digital
-I have extra USB slots on the back. I have two light sticks (red, and blue) that i purchased off newegg.
-Vista Home Premium 64bit
-Corsair HX620 Watt Modular Power Supply.
i believe LED8 is flashing red and LED9 is flashing green. And LED10 is ALWAYS red.
According to the online manual it reads: Initializing Hard Drive Controller.This will initialize IDE drive and controller.
This has no relevance to anything and makes absolutely NO sense...
I don't remember this happening ever, so it's new. This is all right above my video card on the motherboard.
Pictures(although i doubt of any use):
Help please?Tell me what this means?
GGRR

IDE = Integrated Drive Electronics.
I went into a computer repair and build store and even they were saying SATA and IDE. I said, SATA is IDE and so is PATA. The guy said yeah, he's just gotten into the bad habit. Just like people saying irregardless--there is no such word as irregardless--well, there used to not be--now it's considered non-standard.

Help please MSI GHOSTGS60

Similar Messages

Maybe you are looking for