Help please, My 945P Platinum p4 640 wont boot properly Orange Light??

If i turn it on on without the graphics card in i get one long beep then 2 short ones, i think this means monitor or display card error(award bios i think), the d bracket goes right through to initialising floppy drive. as soon as i plug the card in and try the d bracket goes all four red , then straight to 1,red 2,orange???, 3 red, 4 green ive tried another card and different ram.
System spec
945P Neo Platinum 7176
P4 640 800FSB 2Mb Cache
Corsair CM2X512-5400C4 ddr2 pc5400, ive also tried some pc2 4300 ddr2 Hynix 512 HYMP564U64P8-C4 (This is on the supported list)
VGA ATi x300 r37 core 256Mb, ive also tried an ASUS Extreme AX300SE 128Mb
Advance 450W PSU
Pioneer 110
Maxtor Diamond max 200gb Sata

jakemon, as you removed the display card, you get long long beep and few shorts one, that means, you're pretty much done with the POST. Everything should have been initialized. Looks like it's something wrong with the card. Do yourself few favours (while I attend other threads )
1. clear CMOS and give it another try.
2. Try Google.com to look for any incompatibility between 945P chipset/MSI board and X300 display card
3. verify that your BIOS is the latest, if not,
4. flash to the latest BIOS
5. if BIOS the same, change your power supply to a better one.

Similar Messages

MSI GT780R Wont boot properly!

Hello!
I recently bought a MSI GT780R and added a 120gb Corsair Force GT SSD to, wich i put in myself. I burned a recovery disk before switching HDD and installed windows and all when everything was done.
Everything has worked as it should, up untill yesterday.
Suddenly it wont boot. I can't even enter BIOS. All i see is the MSI logo and then some white text about missing boot media and all. I've even tried to put in my old HDD without an OS on and boot with the recovery disk, but even that wont work.
PLEASE help me...
Regards

Quote from: NuClear235 on 30-December-11, 06:11:05
What helped? I have similar problem.
Hi, i have the same problem with a xtreem s2 ssd.. have u find any solution yet?

Laptop wont boot caps lock light blinking continuously

some time in startup it beep 25-30 times, after booting key board will not work.....

The 'blink' code indicates a memory error.
Here is the HP guide for troubleshooting this error.
Troubleshooting Blink Code Errors
Number of Blinks or BeepsLocation of Blinking LEDsComponent Being CheckedError Condition
Continuous glow
Battery power LED
Battery
The AC adapter is attached and the battery is charging, but does not yet have sufficient charge to power the notebook.
1
Caps Lock/Num Lock
CPU
CPU not functional
2
Caps Lock/Num Lock
BIOS
BIOS corruption failure
3
Caps Lock/Num Lock
Memory
Module error not functional
4
Caps Lock/Num Lock
Graphics
Graphics controller not functional
5
Caps Lock/Num Lock
System board
General system board failure
6
Caps Lock/Num Lock
BIOS
BIOS authentication failure
Continuous blink
AC power adapter LED
Power adapter
Insufficient power
If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!
Microsoft Certified Professional
CompTIA A+ Certified Technician
My System: Self-Built Custom
OS: Windows 8.1 Professional
Case: In Win 904 ATX
Motherboard: Asus Maximus VI Hero - Socket 1150
Processor: Intel Core i7 4770K
CPU Cooler: Be Quiet! Shadow Rock SR1 Topflow
RAM: 16G Corsair Vengeance 1866
GPU: Gigbyte GTX GeForce 660 OC
PSU: Corsair RM650 80 Plus Gold
SSD: 256G Samsung EVO 840
HDD: Samsung 1TB x 2
WiFi: Asus Dual Band AC1900 PCI-e
Monitor: 27" IPS Panel
Keyboard: Corsair K70 Vengeance - Cherry MX Mechanical Switches
Mouse: Cyborg RATT 9 Wireless Gaming Mouse
OD: LG BluRay Burner

Keep getting BSOD and need help PLEASE ! P7N Platinum Sli

Hey guys ,
Can someone please help me ? I have been getting BSOD for along time now and then i get a windows recovered from serious error when it boots back up , i always send in the error report and usually it says a driver problem but i have re-installed every driver servral times and and re-formated my pc sevral times to try and get it to run right . Now i finally got a different report back from windows error reporting saying a "Non Compatable BIOS is the cause " here is the error report screeny i took and uploaded to flickr http://farm4.static.flickr.com/3538/3349882297_4a3194e3df_b.jpg and this is another screeny in flickr of my BIOS in MSI Info View http://farm4.static.flickr.com/3445/3349882397_ef282a33d2_b.jpg , i believe i have the newest BIOS installed and the correct one also and have been running that version for along time . When i first setup this system i could not get my Q9550 to boot at all with this mobo till i updated the bios to the P0B6 but have never had it stable from BSOD . My Specs are Q9550 "Core 2 Quad Yorkfield SLAWQ Q9550 333 2.83 12M " / MSI P7N Platinum 750i SLI / OCZ Vendetta CPU cooler / 4GB- 4x1GB OCZ FLEX DDR2 1150 / OCZ GameXtreme 1010W / 2x - XFX GTX260 Black Edition in SLI / 1TB Seagate HD .
Also i had just tried the live update but it says there is no new updates for bios , when i first did the update i used a 3.5 floppy and flashed the bios to the ver i currently have now because there was no way for me to use the live update with XP Pro 64bit , Now im running Xp Pro 32bit w. SP2
Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ???

Quote from: NovJoe on 14-March-09, 11:22:13
I suggest that you clear CMOS and use flash it to the BIOS v1.1 under the MSI website for your board and see how it goes.
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1373
LOL thats funny !!!!! 1.1 is what came installed on the mobo and is not compatable with the Q9550 it will never boot to bios using 1.1 with a quad core ! Thats the first problem i had thats why i explained all the steps i had to go through to get this mobo / cpu to boot with the help from MSI tech support !

Help Please Download links for flash lite wont work.

For Some reason the download links on on the adobe site dont
seem to be working. If possible can someone please email me the
install for windows mobile 5. Im going to be using it on a Motorola
Q.
Thanks allot guys, appreciate it.
[email protected]

This is super weird, particularly because the ActiveX (for Internet Explorer), NPAPI (for Firefox) and PPAPI (for Chrome) browsers are all pretty different. This is definitely not the normal pattern.
Does *any* Flash content work? Maybe something old like http://www.homestarrunner.com? My guess is that it doesn't.
I definitely need some more clues:
- Operating System and Version
- Browsers and Versions
- Any anti-virus/anti-malware/firewall/save-flash-video-to-disk kind of stuff installed?
- Any JavaScript blockers or privacy plug-ins that might block JavaScript from executing?
My gut feel says reboot, Uninstall Flash Player | Windows, then download a fresh copy of Flash Player for Firefox and Internet Explorer by using each browser to go to http://get.adobe.com/flashplayer.
Hopefully that helps.

Help a partion shows up (Bootable) but wont boot to it!!! PLEASE URGENT

I noticed that it had zero space left, when I boot to another partition, I can copy files and even open files...but when I boot to the Snow Leo partition, it says to copy then backup, then refomat as soon as possible.
I would try Snow Leo install again with migration, will that work, the most important is Logic, I do not want to reinstall all my software for logic again.
Here is the error code from disk util.
After trying and failing to repair, it says restore and back up your files.
Invalid sibling link
What if I used Carbon Copy...is this a HD problem or OS problem.
I just want to either CC it (LEOPARD) or use SNOW INSTALL and migration assistant (although there have been times when it asks for some of the serials again, not all, but some, but the music program and my website are the most important.
What would you do? I don't like SL due to watching TV online, many of the players still do not work with SL, Lost, Numb3rs, NCIS...
Will CC work?
Thanks all!!! This is my living and I need it fixed. Must get a backup and time machine going
Tiger10.11
Leopard 10.5.8
SL 10.1
SL 10.2 Clean
Those are my partitions on two EXTERNAL HD and I need the LEOPARD TO WORK, LOGIC and it's plug ins.
Thanks - can I just drag the plug ins folder? No, that won't work - why dont we have a migration asst. that lets you pick individual programs - that would make the most sense.
Ok. Thanks again Geniuses.

Sure it is a 2.4 MBP The last before it went with the swipe twist and has express slot.
Early 2008.
The hard drive had zero space on it at one time and DW said it had no where to write the new rebuild, but I was unable to delete anything from it, I could however copy and move files from it but not delete. It now has free space as I was able to delete at one point during this process.
The other important thing is, the one time I was able to boot from it, mail kept quiting and logic just froze the system, so am hoping maybe OYNX could help too with DW? I also use this for my web site using rapid weaver.
As well, many of the software plug ins are huge and would take a long time to reinstall, just FYI.
The HD is WD. It is Leopard 10.5.8 (also the one tied to my iPhone).
It is showing on the desktop now. If I do a disk util, it is grayed out. But after the rebuild it said it was fine and I was able to delete some files. The OS I boot to is 10.5.7, all the time the repair permissions have been grayed out. I am basically back to where I was last night before using DISK WARRIOR and wondered if I should have tried CC it to another HD and see what happened, but did not.
So what else can I tell you? The partition I need is 10.5.8, would upgrading this 5.7 to 5.8 make a difference? Surely there must be a way to get this to work. The HD is a little over a year old, never moves. Neither does the MBP for that matter. It used to move a bit but not that much anymore.
I did not install all my logic and things on snow as the open GL was slower than leopard, plus it had trouble playing back movies online, ABC, NBC.
Basically I want to be able to boot to this HD but when I try, the Mac just shuts down and as mentioned before DW says it is locked.
Two External HD's
Old one 500GB
Partition 1 (the one that seems to be failing) has four partitions on it.
Leopard 10.5.8 (what I need)
Clean Snow install
Partition 4 is a copy of my SL so if I wanted to reinstall I would not have to look for it.
The new HD 1 Terabyte
Snow Leopard with migrations assistant
Free Space
And what I am using now, 10.5.7.
Then of course, on the mac itself is 10.4, Tiger, which I never use any more but does have important info on it.
I also have a USB HD that I could use for Time Machine, but think it's only 150GB or so,
The partion I need to boot, 10.5.8 is 167GB on older external 1 year and has 5,5 GB free now.
I thought maybe snow leopard with migration assitant but is only 250 GB, or I could wipe it, do a new install and migration asst into it as a last resort, What say you.
Thanks
Free Space.
Message was edited by: avidfcp

HELP PLEASE - Still struggling with 3-5 minute boot times - Neo4 SLI

Okay, I THOUGHT my computer was "locking up" after the "DMI Pool" meesage on about every other boot. The fact is, it may have never actually locked up, I just thought it did whe it just needed more time. I've read about possibly trying to roll back my NVidia ATA drivers, but Windows says there are no drivers to roll back to. Could someone tell me where to get alternative drivers?
Better yet, could someone tell me what I'm doing wrong to get this LOOOOOOONNNNNGGGG Boot time?
By the way, I have tried going with just one SATA, I've tried two, I've tried a PATA drive alone, and I've tried all three. No help
(I'm a newbie here, but I THINK my system specs will show up below in my signature. If not, I'll follow up in a reply messagewith the specs.)
PLEASE HELP!
Thanks for reading - thanks even more if you can help.

1) Quote
Lite-On CDRW
seems common. Check that your optical drives are correctly jumpered (master/Slave). The Nvidia ATA drivers require this & don't like CS(cable select) which some drives are set to. if in doubt check the manufacturers site for the jumper settings.
2) if there is room have the optical drives on seperate ide channels. again if moving them update jumper positions if necessary.
3) If all else fails change Ata drivers to the Nicrosoft ones.
In device manager :-
Click update driver on the Nvidia Pata driver tab in properties.
Choose install from a specific location
Select dont choose , i will choose the driver
Then select standard dual channel pci controller which is the XP 1
luck

My Macbook Pro 2011 wont boot properly. only when batter is disconnected. HELP

hi all.
i have recently bought a macbook pro, 2011 i5 4GB knowing it wasn't fully working, but i need some help.
when i try and power it on, nothing happens at all (it did turn on once for about 10 seconds, then shut itself down.) i have since been playing around with it, fault finding, and i have found out that if i have the battery disconnected, and have it connected to the charger it works! (if holding CMD+D.) i have tried running the hardwear test, but when holding down the relivent keys on startup it just continues to load the OS X as normal. i do not have the start up discs either. im not entirely sure where to go from here, id love to know what could possibly be causing this fault. any help would be greatly appreciated. thanks in advance.

Update - I've got it all powered up, updated etc. it only doesn't start now after a forced shutdown (holding off button) if I press shutdown, restart etc it works fine. Really want this sorted, any help would be greatly appreciated. I'm ripping my hair out! Thanks

SOS help please. Macbook Pro won't turn on. Blinking Light

Hello to everyone this is my first post here and sadly its about a problem with my macbook pro.
The notebook in question is a 17'' Macbook Pro I bought in September 2008.
I simply closed it (without turning it off, just let it go on sleep) and took it with me as usual and when I tried turning it on again, it would not turn on.
I press the power button and I hear the hard drive/superdrive (not sure which of the two) start up and I see the sleep light turn on but after a few seconds its turns off again. If I hold the power button down for a few seconds the sleep light starts blinking and then the notebook turns off once more. In all cases the screen is black.
I tried everything here http://support.apple.com/kb/TS1365 and tried removing and re-installing the RAM and nothing changed.
Short of trying to re-install the RAM again I have no idea what to do. I won't be able to visit a Genius until after the 5th so any ideas/suggestions?

see http://support.apple.com/kb/HT2674 and http://support.apple.com/kb/HT2341 for some information about beeps and flashes.
In your case, though, jinnes, the slow blinks suggest that the computer is simply refusing to wake up from sleep.
One possible, though unusual, cause of this can be if you are using the computer with it stacked on top of a macbook. In this case the magnet in the macbook underneath activates the Hall effect switch in the MBP, making the latter think the lid is closed, and preventing wakeup. I've had this happen to me and it is quite unnerving at the time! Simply moving the MBP will fix it. see http://support.apple.com/kb/TS2917
The same effect could be generated by proximity to other magnets.
It is also possible , if this is not your situation, that the hall effect switch in your MBP is actually defective. It may be worth trying simply opening and closing the lid a few times to see if you can get it to activate.
Cheers
Rod

MSI P35 Platinum new build wont boot

I just build my first pc everything is connected correctly. I turn the pc on for the first time, my monitor stays blank then a few seconds later it shuts off then comes back on and the LEDs on the mobo are showing 'Red Red Green Red' or 'Memory Connection Test' (according to the manual.) I'm using two sticks of 512MB DDR2 4200 533Mhz, the box doesnt say this is supported neither did Scan.co.uk in the specs for this mobo, I read in the thread earlier today that 533 should be supported? Any ideas? Should I just buy some 667 or 800 from crucial? ??? thanks

Quote
2x512MB DDR2 PC2-4200 533mhz
Can you provide more details about your RAM modules?
- brand/manufacturer
- model name/ID
Is it ECC or non-ECC RAM?
Quote
its not bad ram
Depending on the chips actually used on your modules you may have a compatibility problem.
Have your cleared CMOS yet (with main power plug removed from PSU)? Sometimes that is all it takes to solve problems like that.
Quote
I just build my first pc everything is connected correctly.
Take the mainboard of the case and put it on a non-conducting surface (cardboard or anti-static bag) and try barebone configuration only:
- CPU (reseat CPU and heat sink)
- one RAM module in Slot 1 (try different brand of memory as well)
- graphics card
- PS2 keyboard
- D-Bracket
- no hard drives, optical drives, add-on cards, USB devices and USB front panel connectors
- check all power connections on your mainboard (especially +12V CPU connector (4/8pin and 24pin main power connection) and make sure your graphics card is connected with the 6-pin +12V PCIe plug of your PSU
- clear CMOS with main power plug removed after hardware changes
See if there are any changes.

Wont boot, flashing sleep light

MacBook Pro 13"
Mid-2010 A1278
Serial: WQ********ATM
When Power Button pressed, it is completely unresponcive except for the sleep light on the front flashes
I have noticed, If it is off the charger and you press power button, it will flash on then off just once.
However, if it is on the charger and you press power button it will flash on and off over and over, even if you then remove charger
Have searched heaps of Articles, they tend to point towards either Battery or RAM....
Battery is fully charged, battery indicator on the side shows its full when pressed.
RAM is fully populated, have removed one stick, tested, reinstalled then removed the other stick, tested, and then used RAM from a known working MBP similar model, all no good.
Have had plenty of experience with these A1278s, but never come across this before!
Thanks in Advance for any help!!

If a SMC reset does not bring life to your MBP, bring it in for service:
http://support.apple.com/kb/ht3964
Ciao.

G61-327CL wont boot; Flashing power lights

A friend gave me his old laptop because it didn't work. HP G61-327CL. When you try to turn it on, the power/charge/dvd lights at the bottom left just flash 3 times. The middle (charge) light seems to be brighter than the other 2, so it's possible that's actually the only one flashing, but I have no clue. The charging light comes on when it's plugged in. I've tried a hard reset, after which it gives four flashing lights, the last one being held for a second.
Any help would be appreciated!

Hey Tyeillin,
Going by what you said, it seems like there is a graphics card issue with that notebook. Take a look at this document for info: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&destPage=document&lc=en&tmp_docn...
If that matches up with what you are seeing, then the unit will need repair - either a new system board and/or graphics card.
I am an HP employee.
• Say thanks by clicking the 'Thumbs Up' button on the left
• Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

Equium A100-549 wont boot properly

On the other day, my Equium A100-549 suddenly couldn't be booted. When the power is ON, there is no anything coming out on the screen (totally dark!). I have noticed the hard derive's light is not on, though the other lights are on.
I tried to boot with the recovery CD, but nothing came out, even F12 or "C" was pressed following the power on press.
I am suspecting that there would be a malfunction of the hard drive, but no any experience to judge this.
It would very appreciated for any advice.
Cheers.
Ning

I'm sure it's not a HDD malfunction.
If the HDD would malfunction, then you would receive an error message that the OS cannot be booted up or something like that.
If you don't see anything on the display and if the Toshiba splash screen does not appear too, then I??ve got a bad news for you buddy.
In most cases the motherboard fault causes such issue. :(
But this is only a suggestion and maybe you are a lucky guy and a cheaper part instead of mobo could be faulty.
The ASP can answer such questions... therefore my recommendation is to contact the authorized service provider in your country and to ask for the notebook check.
Hope the best...
Best regards

I turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)

i turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)

See if your Mac will boot from the install DVD.
Then uninstall Internet Cleanup.
Allan

My iMac wont boot up properly. Stops at background pic, no dock, only little apple show up top and cursor sticks on little spinning wheel. Have to shut down manually in back and reboot to get it to work. Any ideas why this sometimes happens?

I'm running OSX 10.9.1 (13B42)
My problem is that occasionally my Mac wont boot properly. It gets to the background picture where the dock should open but it freezes there. The little apple shows up top left but nothing else and the cursor shows as the little spinning wheel that wont do anything. I can't click on the apple to restart, I have to switch off in back and then start up again. It usally boots all the way after that but I'm worried there's something up since this seems to be happeneing more frequently. Also I'm worried that having to manually shut down like that will somehow damage the software in time?
I tried a disk verify but there were no repairs needed. I repaired disk permissions too just in case but it still seems to happen every once in a while.
I've noticed recently that it happens the next reboot after I've been streaming movies online if that helps. Is there any reason for this and anything i can do to stop it in the future?

Thanks Paul, just ran the etrecheck you recommended and got this:
Hardware Information:
          iMac (21.5-inch, Mid 2011)
          iMac - model: iMac12,1
          1 2.5 GHz Intel Core i5 CPU: 4 cores
          4 GB RAM
Video Information:
          AMD Radeon HD 6750M - VRAM: 512 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:45:16
Disk Information:
          ST3500418AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (350.35 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5690H
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Samsung SCX-4600 Series
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.sophos.kext.sav          (8.0.14)
Startup Items:
          MobileBrServ: Path: /Library/StartupItems/MobileBrServ
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
          [loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
          [loaded] com.anchorfree.ajaxserver.plist 3rd-Party support link
          [loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [loaded] com.sophos.autoupdate.plist 3rd-Party support link
          [loaded] com.sophos.intercheck.plist 3rd-Party support link
          [loaded] com.sophos.notification.plist 3rd-Party support link
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
          [loaded] com.sophos.uiserver.plist 3rd-Party support link
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist 3rd-Party support link
          [loaded] com.divx.agent.postinstall.plist 3rd-Party support link
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          BitTorrent
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          DivXBrowserPlugin: Version: 2.2 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          DivX 3rd-Party support link
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Growl 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Sophos Anti-Virus
                    SophosAntiVirus:          Version: 8.0.8.1 - SDK 10.5 3rd-Party support link
                    SophosAutoUpdate:          Version: 8.0.15 - SDK 10.5 3rd-Party support link
                    SophosUIServer:          Version: 8.0.21 - SDK 10.5 3rd-Party support link
                    InterCheck:          Version: 8.0.8.1 - SDK 10.5 3rd-Party support link
          VLC:          Version: 2.0.1 - SDK 10.5 3rd-Party support link
          Sophos Anti-Virus:          Version: 8.0.21 - SDK 10.5 3rd-Party support link
          Spotify:          Version: 0.8.4.93.gd9f49c35 - SDK 10.5 3rd-Party support link
          Install Spotify:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Downloads/Programs/Install Spotify.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               2%          WindowServer
               2%          EtreCheck
               0%          Google Chrome
               0%          hidd
               0%          SophosUIServer
Top Processes by Memory:
          438 MB          firefox
          139 MB          InterCheck
          119 MB          com.apple.IconServicesAgent
          106 MB          Google Chrome
          78 MB          mds_stores
Virtual Memory Information:
          370 MB          Free RAM
          1.59 GB          Active RAM
          1.25 GB          Inactive RAM
          813 MB          Wired RAM
          397 MB          Page-ins
          0 B          Page-outs
I have no idea what all the means, lol.

Help please, My 945P Platinum p4 640 wont boot properly Orange Light??

Similar Messages

Maybe you are looking for