HELP PLEASE MY ITUNES WONT OPEN

IVE DONE EVERYTHING IVE DOWNLOADED QUICKTIME N ITUNES TOGHTHER PLZ I NEED HELPPPPPP THX

What is happening? Error message or what?

Similar Messages

  • Help please! itunes wont open

    i am using a windows XP and my itunes will not open. I have uninstalled and reinstalled itunes and quicktime numerous times and itunes will still not open. Quicktime opens fine. I have also opened my Task Manager and itunes appear under processes but it disapears after a few seconds. please help!

    Quicktime opens fine. I have also opened my Task Manager and itunes appear under processes but it disapears after a few seconds.
    Hmmmm. Are you getting no error messages whatsoever when you try to launch iTunes? (Just the hourglass and then nothing?)
    If so, then that in conjunction with your other symptoms (QuickTime launching fine, and just a brief appearance of iTunes.exe in your Processes tab after launching iTunes) is most consistent with a problem with the digital signing of drivers on your PC.
    Try running through the "Resolution" section of the following document:
    Detecting digital signing issues in Windows XP
    If iTunes starts launching again after reregistering those dlls, then strongly consider doing vigorous malware scans afterwards. (The initial deregistering of those dlls can sometimes be done by malware.) Download fresh definitions and run vigorous virus and spyware scans. If your security software providers offer them, also try an "online" scan too. (Ther can sometimes pick up an infection even if the security software on the PC has been compromised.)

  • Help!! itunes wont open!

    My husband has been dealing with this problem for a while now, I thought I would give it a go, and I can't for the life of me figure out what is going on.. we have re-installed it to the latest version and everything... you can click on it on my dock and it will bounce like it is being used, but nothing shows up, not even in the apple bar.. please help!
    This is for my Mac OS X ver. 10.4.10

    There have been hundreds of reports about itunes 9 not opening. In my case it tried to open 3 times came up with an error message all three times and now it just tries to reinstall itself each time I click its icon.

  • Help! ,y itunes wont open

    hello, i recently installed 5.0 and used it once. now it will not open. ive tried disabling norton antivirus and restarting my computer. should i uninstall evrything then install it agen?

    See my response to your earlier post.

  • Itunes wont open. itunes has stopped working message Please help!!

    I had itune 10.1 working just normal, and suddenly it wont open. 
      even before that, 1st problem i had  was with Quick time, i couldnt uninstall it, kept saying newer version of Quick time installed..or something like that. and i figured out to install itunes without unstalling quick time. (thanks to Google) and was working fine for a month, and suddenly, now iTune wont open. I tried unstalling it, and reinstalled... that's pretty much i can do now!!  still no hope!! (btw, I use Vista, 32bit!) Please help me... here's what Problem report shows..
      " stopped working"  
    Problem Event Name:
    BEX
    Application Name:
    iTunes.exe
    Application Version:
    10.6.1.7
    Application Timestamp:
    4f71aced
    Fault Module Name:
    cryptdlg.dll_unloaded
    Fault Module Version:
    0.0.0.0
    Fault Module Timestamp:
    4549bd25
    Exception Offset:
    69431040
    Exception Code:
    c0000005
    Exception Data:
    00000008
    OS Version:
    6.0.6002.2.2.0.768.3
    Locale ID:
    1033
    Additional Information 1:
    fd00
    Additional Information 2:
    ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:
    fd00
    Additional Information 4:
    ea6f5fe8924aaa756324d57f87834160
    and another report: "stopped responding and was closed"
    Description
             A problem caused this program to stop interacting with Windows.
    Problem signature
    Problem Event Name:    AppHangB1
    Application Name:    iTunes.exe
    Application Version:    10.5.0.142
    Application Timestamp:    4e9243f2
    Hang Signature:    6a2d
    Hang Type:    2048
    OS Version:    6.0.6002.2.2.0.768.3
    Locale ID:    1033
    Additional Hang Signature 1:    579344e9ab62a3902d6e00f558f404ca
    Additional Hang Signature 2:    1748
    Additional Hang Signature 3:    8fb4784d6c7db48473361b5a4e821ea6
    Additional Hang Signature 4:    6a2d
    Additional Hang Signature 5:    579344e9ab62a3902d6e00f558f404ca
    Additional Hang Signature 6:    1748
    Additional Hang Signature 7:    8fb4784d6c7db48473361b5a4e821ea6
    PLEASE HELP ME.....  MUCHO GRASSYASS!      

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • ITunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

    iTunes wont open for me. it keeps saying "the Disc "untitled playlist" cannot be read. An unknown error occurred (-69)." don't know how to get it to work. Please help

    It is likely a hardware failure
    http://support.apple.com/kb/TS3694?viewlocale=en_US#error1

  • Hi, im trying to update my itunes to the latest update 2013 and i keep getting the error 2324 and now my itunes wont open at all...did i loose all my media i dont know what to do next please anybody help me thanks

    hi, for the last 3 hours i ve been trying to install and update itunes to the lates update....before my itunes would open just like i want it to  and ever since i tried updateing to the new software my itunes wont open i get a code 2324....i realy dont want to have to put itunes on a diferent computer....please help on what to do to fix this and get my library back cause it wont open....please desperately need help
    Laura Brown

    The first step is to try this Microsoft fixit:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    If that doesn't work we will have to try something more complicated. It is a could not open file error message from the installer.

  • Itunes wont open when iphone connected to mac, please help?!

    i updated my iphone 4s and tried connecting it to my mac but itunes wont open at all, so i updated mac software as well as itunes, and itunes still won't open up when i connect my phone.
    P.S. iv'e already tried taking the USB cord out and plugging it back in twice already... still wont open.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • My itunes wont open! but my quicktime player works fine! help please

    my itunes wont opena dn ive been told that if my quick time does not open then people have solutions but what should i do if my quicktime opens fine its just my itunes that wont work??
    pleas help me i appreciate it

    hi ho!
    well i did what u suggested and the itunes only stayed there for about 10 seconds...
    hmmm. i don't really like the sound of that. it's consistent with the malware problem (it seems to be a Qoologic variant) that has been causing "error-less" itunes launch failures for a lot of people since late October.
    however, there are at least two other fairly common causes of error-less launch failures (and some rarer ones), so the diagnosis can be a bit tricky. look through the diagnostic procedures and treatment suggestions given in this post here:
    http://discussions.apple.com/click.jspa?searchID=349706&messageID=1211446
    if you do get itunes launching using the MSCONFIG technique, let us know the names of the start-up items you you have to disable. (letter-for-letter-capitalisation-for-capitalisation. include the filename extensions of the start-up items.)
    love, b

  • Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start.  You have insufficent privileges to start system svc.  Help?

    Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start.  You have insufficent privileges to start system svc.  Help?

    Download Itunes from Apple.com, not from within Itunes.
    Redo the install, following the below procedure.   However, when you re-install Itunes,  right click and run the install as administrator.   For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes

  • Itunes wont open need help backing up music on external hard drive

    My itunes wont open after upgraded to 8 , ive uninstalled and reinstalled itunes and quicktime and still wont work. i found a topic to possibly help me but i dont know how to tranfer my music to an external disk drive without being able to open itunes. i am getting so frustrated. please help

    A usb hard drive that Windows sees doesn't need software for a simple back up.
    Format the hard drive Disk Management, if it doesn't come already formatted, and then drag and drop the iTunes folder and whatever other data you want to back up to it.
    What you're describing doesn't sound like something iTunes did. If you're having general install troubles you have another problem with your system and it's time for a little troubleshooting to find out what's really going on.

  • ITunes wont open. when I click on it, it says " iTunes can not run because of the required files are missing. please reinstall iTunes.

    iTunes wont open. When I click on it, it says " iTunes cannot run because some of its required files are missing. please reinstall iTunes". PLEASE HELP!

    See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

  • Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

    Can you start QuickTime on your computer?
    You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

  • Can anyone help? itunes wont open and i need music!

    hello im new to this so excuse me if im rambling.
    Ive recently updated software when turning on my mac when it offered it automatically and now my itunes wont open. A box comes up saying " the application itunes quit unexpectedly. other applications are not affected. click reopen to open the application again" blah blah...
    And of course it wont open if i repeatedly try.
    Can any of you lot tell me what i can do to rectify this and save me a whopping £35.00 that apple isists on getting if you want any help from them via the old phone!
    Thanku thanku thanku if u can shed some light on this for me!
    emac   Mac OS X (10.4.8)  

    You did not indicate the name(s) of the automatic Software Update. Was it just an iTunes update?
    Run the Repair Permissions (Applications/Utilities/Disk Utility) then Restart your computer. Relaunch iTunes.
    If iTunes fails to open, disconnect any Firewire/USB peripherals (except Mouse) and reinstall that same version from the Apple Downloads Website, then repeat the above Repair and Restart.
    DIXIE
    15"iMacG4/800/60GHD/768MB-12PB/867/60GHD/1.12GB-G3/400/1GB   Mac OS X (10.3.9)   AE network

  • Itunes wont open i get "itunes libary.itl" can not be read because it was created by a newer version of itunes. help

    itunes wont open i get "itunes libary.itl" can not be read because it was created by a newer version of itunes. tried deleting itunes an re installing. help

    The same thing happened to me no one has replied to my comment either!! I need help!!

Maybe you are looking for

  • Apache cannot load mod_jk.so

    Wondering if anyone has bumped into this? I did a vanilla install of cf10 on mac 10.5.8 on top of the mac-installed apache webserver (i.e. the one that comes stock with the OS, not a macports version or custom compile) ... a few vhosts are defined. c

  • Long time for execution for scheduled CIF background jobs

    Hi, we hv schedlued CIF background job to be run daily around 10.30 PST. there is large variation for the time required for execution of this job. on 26 Dec, it took approx 48000 seconds while regular average is 120 seconds only. today, despite past

  • Missing Flex Builder 3 file

    When I try and start the IDE I get an error telling me it can't find the config.xml file in "C:\Program Files\Adobe\Flex Builder 3\plugins\com.adobe.flexbuilder.flex_3.0.214193" java.io.FileNotFoundException: C:\Program Files\Adobe\Flex Builder 3\plu

  • Error:java.lang.NoSuchMethodError:javax.servlet.jsp.tagext.TagAttributeInfo

    Hi All, I am getting the following error when i create a jsf jsp page and build it in jdeveloper. Error:java.lang.NoSuchMethodError:javax.servlet.jsp.tagext.TagAttributeInfo.<init>(Ljava/lang/String;ZLjava/lang/String;ZZ)V when i build the applicatio

  • Dynamic Buffering Based on Bandwidth and Datarate

    I'm trying to determine an initial value for NetStream.bufferTime based on the client's calculated bandwidth and the video's bitrate. As far as I can tell you can't do this, because you must have an initial buffer set BEFORE you call NetStream.play()