Help! Please! My music has stopped working in itunes...

It plays all fuzzy and broken. Checked that it is not a hardware issue, and its not.... itunes has just stopped being able to play my music... even CDs I put in and play through itunes don't work. I don't want to lose all my music, and don't know what to do! [I have a PC]

Hello Rach,
It sounds like your iPhone is not communicating with your car stereo through Bluetooth, but it was successfully communicating at one point. I found an aritcle with some steps to address this issue:
Cannot connect to a paired device
Ensure that the Bluetooth accessory is in range. Most devices have a range of approximately thirty feet.
Delete the pairing record and pair again.
Ensure that the firmware or software on the Bluetooth accessory is up to date.
Ensure that the Bluetooth accessory is charged or connected to power.
Turn off both the iOS device and the Bluetooth accessory, and then turn both devices on again.
If the issue persists, test Bluetooth with another device or consult the manufacturer's documentation.
The article also includes the steps to delete the pairing under "Remove pairing records" and steps to pair your devices under "How to pair with a Bluetooth accessory." You can find the full article here:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Similar Messages

Can I sync when I see ATH.exe has stopped working in iTunes?

Can I still sync when I get the message "ATH.exe has stopped working" in iTunes?

Hi Amethest,
Thanks for visiting Apple Support Communities.
If you're unable to sync due to this error message, you may need to remove and reinstall iTunes by following the steps in of these articles:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Best,
Jeremy

My debit card has stopped working on itunes, as it is asking for an issue number which my card does not have?

My debit card has stopped working on itunes, as it is asking for an issue number which my card does not have? I don't know why it is not working.

Andy ...
If you are going to use a debit card it you must enter a security code.

After installing 10 .5.1 and buying itunes match I click add this computer and I get a window saying itunes has stopped working and itunes closes

after installing 10 .5.1 and buying itunes match I click add this computer and I get a window saying itunes has stopped working and itunes closes

I found that after I turned on geniuseverything worked

HELP!! Lightroom has stopped working.

Just added serial number to my trial program & it was loading & working just fine for a couple minutes & then all of a sudden it just closed & stopped working. When I go to open it now it says "Lightroom has stopped working" check online or close program, but it doesn't do anything when I go to check online. also when I view program details...it says the even was APPCRASH. Does anyone know what happened. I assume yes, something crashed. But I tried uninstalling & reinstalling & it is still doing it! Can somebody help!!!??? Please?

Open a Windows Explorer, and navigate to the following directory:
"Users\[username]\AppData\Roaming\Adobe\Lightroom\Preferences\"
In there, you'll see a file called "Lightroom 3 Preferences.agprefs". Rename this file to "Lightroom 3 Preferences.agprefs.old", then start LR.
Beat

HELP!! AppleMobileDeviceHelper has stopped working

HELP!
Whenever I open iTunes Windows displays a message that says, "AppleMobileDeviceHelper has stopped working. A problem has caused the program to stop working. Windows will notify you when a solution is available." Also when I plug my ipod into my computer iTunes doesn't recognize that it is plugged in.

For this one on Vista machines, the following announcement has some troubleshooting tips:
http://discussions.apple.com/ann.jspa?annID=640
... for more info on using MSConfig, see the following document:
Using MSCONFIG to troubleshoot conflicts in Windows Vista

Help!! Keylock has stopped working......

Hi. i have a iPhone 4, and my keylock button has stopped working. I cant touch it, nothing happens. Anybody who knows how I can fix this? Can I take off the back case and push it up, or what? I havent lost it in the ground or something like that, it's just stopped working.

For this one on Vista machines, the following announcement has some troubleshooting tips:
http://discussions.apple.com/ann.jspa?annID=640
... for more info on using MSConfig, see the following document:
Using MSCONFIG to troubleshoot conflicts in Windows Vista

Message "itunes has stopped working". Itunes opens and can read an audio cd but as soon as the "get information" option is selected the message "itunes has stopped working" and the computer freezes or at least slows to a snail's pace.

Hi,
I have a PC running Windows 7 - 64bit OS. I have had iTunes installed since the beginning of the year on this computer and have not had any trouble with it except actually using iTunes but that is a different issue. The other day I inadvertently downloaded "Tuneup" which I don't want or need. I firstly want to say I have no concrete evidence that Tuneup has led to my problems. It may be coincidental that Tuneup and my problems appeared together.
Tonight when I started iTunes, Tuneup took over a quarter of the screen on the right side. I closed this program. When the list of tracks was ready to be loaded from the CD and I went to" file" - "get info" option the message "iTunes has stopped working" would appear. Closing this message resulted in iTunes shutting down. I should say that before I closed the message the computer had essentially ground to a halt. The other curious thing was the behavour of the mouse pointer on the screen - the only place where it was visible was in the "iTunes has stopped working" box. Moving it out of the message box resulted in it disappearing. It would reappear if it were caused to wander into the message box.
I subsequently removed Tuneup (control panel, programs and features, etc...) iTunes had not improved. I then deleted iTunes, firstly saving the library to a file on the desktop. Then I did a fresh(?) install of ITunes but there seems to be no change. A curious thing was even though I had deleted iTunes through the control panel the library was still there as if I had done nothing. The whole thing is a complete mystery and extremely galling.
If someone has had a similar problem I would really like to know what the fixes were.
Thanks for "listening".
Cheers,
Grant Andrews.

I had a similar problem. I'm using 64bit Windows7. The following solution worked for me:
COPY    QTMovieWin.dll
FROM    c:\program files (x86)\common files\apple\apple application support\
INTO     c:\program files (x86)/iTunes
Also, reinstalling Quicktime has worked for others having this same issue.

Help! 6D lcd has stopped working and autofocus no longer working!

Ok - I scoured the internet as best a I could and could not find any troubleshooting with the issue I am currently having with my 6D. The camera stopped working in the middle of photos I was taking of a sunset over the lake. The camera LCD was no longer working (allowing me to look at photos, bring up the menu etc) it was just black. However, when I turn the camera off, it displays the "sensor cleaning" on the back of the LCD so that must mean the screen is working, its just not allowing me to see any information displayed by my camera.
The display at the top right of the camera by the shutter button that shows all the aperture, ISO and shutter information works and is accurately monitoring the light change. The display when I look through the viewfinder showing the light meter is working too. I can change settings in manual mode and it will display the changes in both the viewfinder and upper shoulder display.
However, the other issue is the autofocus isn't working correctly. When the lens (and I've tried different lenses, they all have the same issue) tries to autofocus, It sometimes will correctly (I can see it hit focus when the small box in the viewfinder lights up ready) but the majority of the time It will just act like its in manual focus mode and shoot everytime the shutter is pressed.
THE OTHER thing is the shutter button is permanently pressed in. Its not "raised" like it usually is allowing you to lightly tap it gain focus. I cannot change where the focus point is either, its permanently stuck on one to the right of the center point.
One small detail, at some point during my shooting today the rubber eye cap around the viewfinder fell off. Not sure when this happened because I was wearing glasses and didn't notice it came off but was wondering that would cause any of these issues (can't see how it would..)
I shot A LOT of photos today, all in RAW. I mean.. I was literally shooting all day for 8 hours, NON-STOP so I'm not sure if was something that could cause these issues either.
The camera is still recording the correct image data to the card since the issue started, I checked on my computer.
Not sure whats going on here, and I'm really worried! I'm worried that water or sand could have gotten into the camera and cause the issue, even thought I was being extra careful that this wouldn't happen since I was on the beach (Lake Michigan, fresh water).
If anyone has any ideas to help please let me know!

I suspect your last paragraph explains the problem. Try unstick in the shutter button by trying to carefully insert a business card between the button and camera body and sweep the circumference of the button to remove the sand particle.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Help! My hotmail has stopped working since i switched to hotmail safari

Help! My Hotmail is not working since I upgraded to hotmail safari for iPad. It was fine before that, but now I can't reply to emails, open them, check the delete box, get the keyboard to appear etc etc. Please help- I use hotmail all of the time. How would I revert back to my former account , for example - the one that was working?

A reset will not delete anything. It's equivalent to a reboot on a computer.
Home button
http://i1224.photobucket.com/albums/ee374/Diavonex/50e04c5f.jpg
Sleep/Wake button
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg

Help, My web app has stopped working.

Hey guys, I got my N95 thru orange and i've had it for nearly two weeks now. The phone is great and until now I've had no trouble.
I've been using the inbuilt web app to access Orange world (Oranges mobile site, football, tv, etc etc) and all of a sudden it's stopped working.
I have contacted Orange and they have sent me a configuration message with the wap settings and they have also talked me through setting them up manually but it still hasn't worked. I also didn't think it was the settings that were at fault in the first place but they still talk you through it all anyway.
What happens is when I click onto the web app, the menu disappears as though the phone is about to launch into the web app itself and then straight away it returns to the phone menu. It doesn't even attempt to connect to any service at all. Just straight back to the menu.
I think maybe the app itself might be missing.
Can anyone help me out
Thanks
David

if u have been using it ok up til now then it cant be settings problems, have u tried switching off the handset and removing the battery for a while if not then its a trip to a nokia service centre or u can set the handset back to factory settings yourself on the standby screen type *#7370# enter the lock code (default 12345) then fone will re start back to factory settings, be warned, back everything up if u can because u will loose everything!
Phones I've owned (not in any order) 8210 7100 3510 3510i 7650 9210Communicator 1600 3310 3330 3650 5110 6230 9500Communicator N70 N90 N91 N73(ME) N95

My itunes works, but when I click to go to the store, it says windows has stopped working and itunes closes out all together and i cant figure out why

please help

I'm expreriencing the same conditions with the same environment. Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT. I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
My iTunes StoreS from my iPhones ARE OK.
I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions....

HELP my microphoto 8gb has stopped worki

Hello?Recei'ved? my microphoto for xmas and worked fine to start with but this morning it has locked up or frozen and the touch keypad is not responding have tried reformatting but as keypad not responding cant get it to do anything tried the firmware upgrade but made no difference is fully charged. When plugged into pc is recognised and can select and play through pc but obviously cant carry pc around with me has anyone had same problem and any ideas how to fix thanks?Dee

@fgeeky75
Sorry to hear power failed at inopportune moment whilst re-installing device software and unfortunately within the parameters of this manufacturer's sponsored forum I would have to say that you need to visit Nokia Care Point for re-installation of device firmware.
Happy to have helped forum with a Support Ratio = 42.5

*HELP* Adobe Flash Player Has Stopped Working

Problem signature:
Problem Event Name:    APPCRASH
Application Name:    install_flashplayer11x32_mssd_aih(1).exe
Application Version:    3.3.3.0
Application Timestamp:    5010882b
Fault Module Name:    setueout.dll
Fault Module Version:    3.0.2.0
Fault Module Timestamp:    5058e043
Exception Code:    c0000005
Exception Offset:    0000780f
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    d87f
Additional Information 2:    d87f106aaddbb918f9435119535c31be
Additional Information 3:    de48
Additional Information 4:    de483c87c736ac9abe1e617853f81924
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
COMPUTER SPECS:
System Information
Time of this report: 9/25/2012, 20:40:34
       Machine name: KYLE-PC
   Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
           Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
       System Model: Z68X-UD3H-B3
               BIOS: Award Modular BIOS v6.00PG
          Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (8 CPUs), ~3.7GHz
             Memory: 8192MB RAM
Available OS Memory: 8110MB RAM
          Page File: 2745MB used, 13470MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7600.16385 32bit Unicode

Thank you for the report. Does this occur each time you try and run the installer? Can you try the appropriate installer located here?
http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

Home Share has stopped working in iTunes (10.5.2.11)

My iPod touch Remote no longer works to find the library on my Windows XP computer. It has worked for some long time here prior to this newest version of iTunes. (It doesn't work on my iPad either.)
If I turn off the Windows fire wall it works very well! So there must be some ports that need to be enabled. The question is what ports.

Home share uses the following: Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries --- this according to Apple. I had previously opened UDP port 5353 to solve another problem. Opening TCP 3689 solved the home sharing problem.

Help! Please! My music has stopped working in itunes...

Similar Messages

Maybe you are looking for