HELP PLEASE n97 connectivity with pc

Hi.I just got an n97 and i'm trying to connect it with ovi suite to restore my security copy but it doesn´t work.
It says that my device is connected in the file transfer mode but I choose pc suite mode on the phone all the time...
I have restarted the pc and the n97 and it's always the same.
when i go to connection wizard it says that he can´t connect to do all that stuff I already did...however my computer detects the phone without problems and the files appear in 'my computer'
What should I do?

buxi07 wrote:
ALSO ADD I AM ALSO INTERSTED IN N900 BUT I WANT MY DEKSTOP VERTICALLY AND I THINK IT DOSN'T ROTATE VERTICALLY CAN U TELL ME ALSO THAT THE LATEST FIRMWARE CAN MAKE N900 TO ROTATE VERTICALLY? IS THERE IS AN ACCELARATOMETER IN N900?
Currently, I believe the N900 operates in tablet mode landscape and phone mode only in portrait. Like the missing MMS feature, maybe Nokia may be able to fix this in a later firmware update. I read somewhere that they were more recently working on software stability and performance. New features were definitely for a later release, which personally, is the best philosophy in my mind. I think they had their fingers burned by the N97.
EDIT: Just read the specs and I didn't see a mention of an accelerometer in the N900 so from that I can't assume it has one. http://maemo.nokia.com/n900/specifications/
Message Edited by matt_t on 30-Sep-2009 06:40 PM
Nokia N8 on O2-UK
Firmware 022.014

Similar Messages

N97 connectivity problems. N97 connects with WLAN ...

Hi,
A few days ago I installed the new firmware version 21 on my N97. Now when I turn on my phone it wants to connect to a wlan so that the phone can use that connection for your widgets that require internet. Before update 21 it always would connect with my mobile internet which is want I want it to do. This is not a problem for some apps since I can change the settings for those apps and have them connect to the mobile internet. But for some apps like the Ovi store or downloads of updates for my phone keeps asking for a wlan connection which in fact is turned off in my settings so why is it even asking for wlan?! The problem for those apps is that I can't change the settings so that they also connect with my mobile internet just like before with firmware version 20. I hope that you can solve this issue?

>but what happens if the biosupdate fails and the Lappy dont work anymore, is this ok with the garantee ?
Before you start BIOS update please check Toshiba BIOS-Update Information .
Bye and good luck!

(HELP PLEASE) ISL connection fails with a visibroker server

Hi all,
I developed a tuxedo-corba client to use a non-tuxedo orb, my test in Tuxedo were fine, because I was using a Tuxedo-Corba Server with a DUMMY corba method.
I'm using Name Service and ISL who connected to a //localmachine:xxyy
But, when I'm trying to connect to a external Corba Server, (//111.222.333.44:14000) non-tuxedo, it fails.
Maybe I need something more, can you help me please...
Thanks a head for your help.

You need to explain a little more what you are doing and what configuration you are using TOBJADDR does not work with foreign ORBS, you have to use standard CORBA urls, e.g. corbaloc:iiop:host:port/NameService

Help for getting connection with oracle database

Hello,
i have a problem to connect my java program with oracle databse.
i have oracle 8 release. i tried all my best to connect but i
can't. please help me. whenever i compile JdbcCheckup.java file
which is distributed with oracle 8 release, it compile successfully.
but whenever i run JdbcCheckup class file then it will generate an
exception and that is -
Exception in thread "main" java.lang.ClassNotFoundException:
oracle.jdbc.driver.OracleDriver
at java.lang.class.forname0(native method)
at java.lang.class.forname(unknown source)
and some other error message.
But, by following yours given instruction, first, i unzip CLASSES111.zip
in file which is distributed with oracle 8 realease in jdbc subdirectory
into c:\temp directory and then run oracle installer(setup.exe) and point
the installer to c:\temp and then i install the oracle JDBC drivers(beta)
7.3.3.1.3 from the jdbc subfolder into oracle installer by selecting
win95.prd for jdbc subfolder.
After that i write into my autoexec.bat file,
path d:\jdk\lib;d:\jdk\bin;c:\windows\command;C:\temp\BIN;c:\temp\jdbc\lib\classes111.zip
and then i restart the machine and the i complile and run JdbcCheckup file
But, i can't recognize my error to define class path or installing the
driver. please help me in details so that i overcome this problem.
because i am student of B.sc. in CIS of final year. i need to submit
my project within some days. please reply me as early as possible.
thanks
hemonto
email - [email protected]

path d:\jdk\lib;d:\jdk\bin;c:\windows\command;C:\temp\BIN;c:\temp\jdbc\lib\classes111.zipYou've added classes111.zip to your PATH, not your CLASSPATH.
Add it to your CLASSPATH using:
set CLASSPATH=%CLASSPATH%;c:\temp\jdbc\lib\classes111.zip
then try to compile/run again.

Help please, cant connect Homehub 2.0 to laptop

I have upgraded to the Homehub 2.0 from Homehub 1. I have my desktop computer linked to my homehub 2.0 via an Ethernet Cable as did previously with the other router. Linking my laptop wireless. I am having connectivity issues concerning my laptop. Initially when I go into network settings search for new wireless , found my BT Homehub 2.0 no probs. Inputted WPA key as requested and it linked. Broadband extremely slow coming at 1.0 mbps connection speed. Did a speed test on desktop and everything is as it should be.
Went back to the laptop and refreshed the wireless connection, still no joy, struggled to find the BT Homehub 2.0 second time round, when found , very slow to connect once I inputted the WPA key.
If anyone has any ideas as to the problem I would be most grateful.
Thought the laptop would be a doddle to set up as was previously.
Am I missing something really simple here ?
I reverted back to the original Homehub, and everything is back to normal but wish to use the new Homehub 2.0.
Please help............................
Thanks

How strongly should I put this.
If you value you Personal Information & do not want File Sharers to hitch-hike on your router's connection don't use WEP encryption!
Remember the Digital Economy Bill which plans to make you responsible for anyone who uses your IP address/router.
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

BT box wiring! (Help please , bank hol with no int...

Hi, wonder if anyone can help ...
anyone able to advise what the wiring sequence should be on my BT open reach box?
It looks like there is a blue (A) and white blue (B) cables connected to the internal A/B connectors, but where do these corresponding cables then connect into? There appears to be two options - either they connect to the A/B connectors on the plate that fits onto the main box or they connect up to the 2 / 3 / 5 connectors on the rear of the faceplate - anyone got any ideas?
Solved!
Go to Solution.

the lay across the terminal and then 'punched' in with an IDC tool often they are plastic
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I need help configuring a connection with asdm 5.2 for asa

Hi All
I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
When he tries to connect he gets the error
Cant connect to MySql Server at "IP Address" (10060)
He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
Any help would be greatly appreciated

Hi,
I'm not a security specialist but here is how I had it set up at home:
Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
Hope this points you in the right direction.

Help please? problems with screen resolution & external monitor

had a look around this forum and seen many questions about screen resolution when connecting to an external monitor but unfortunately, non that help me answer my problem.
got a brand new macbook a few months ago and today bought a HP v220 22" external monitor.
I am new to the idea of external monitors and am unsure what i am doing wrong settings-wise. it seems that no matter what resolution i set either my macbook display, or the external monitor display to. the external monitor is still not sharp.
Im not sure how to explain what i need but basically i need it to be so that things appear on the external the same size as they do on my macbook screen, so that i will have more space to work in on my external monitor (i am a graphics student) but at the moment what appears on the monitor is lieterally just a magnified version of my macbook screen, hence it lacks clarity.
the highest resolution offered in the menu for my macbook screen is 1280x800 and my external is recommended to be set at 1680x1050.
what settings should i have to get the resolution right?
i will be so so grateful if you can help. i think ive tried every single display setting but to no avail. so please help me!

The 13.3" screen on the MacBook running at 1280 x 800 will have a ppi (pixels per inch) of around 113. A 22" monitor running 1680 x 1050 will have a ppi of around 90. So it is natural that it will look magnified compared with the MacBook. The two displays have different a pixel pitch.
Since there are no monitors with ~113 ppi out there in the market, what you want to do with having the same size and sharpness between the MB and a monitor will not be possible.
If you ran the MB's screen at 1024 x 640 (not even sure if that is an available choice), then the two screens would match in terms of "magnification." But the MB isn't going to look very sharp running such a low, non-native format.

Help please? connection issue

Been trying to connect my BB pearl to my laptop so I can update the software but the phone isnt being detected :/ what could this be? my security settings allow the device. I'm confused. Help?

Hi and welcome to the BlackBerry Forums
Read this link please
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15877&sliceId=2&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Help please! connected to an idle instance

Hello,
I am new to oracle administration. I instlled 11gR2 on windows 7 64 bit. It was working fine. Then I applied the patch DB 11.2.0.1 Patch 10: 10432045 . I can nolong connect. I tried a lot and ead lot of blogs. But now thoroughly confused! I am giving soem info that you may need. Please help!!!!
Thanks,
Badal
* All oracle related services are set to automatic start up and are all up
ORACLE_HOME=K:\app\badal\product\11.2.0\dbhome_1
ORACLE_SID=ORCL
When tried sqlplus i got
*>sqlplus myschema/password@ORCL*
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
As sysdba, I got this:
C:\windows\system32>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 3 11:08:44 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
lsnrctl status gives me this
C:\windows\system32>lsnrctl status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 03-MAR-2012 11:11:08
Uptime 0 days 0 hr. 0 min. 20 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File K:\app\badal\product\11.2.0\dbhome_1\network\admin\list
ener.ora
Listener Log File k:\app\badal\diag\tnslsnr\HPC1\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=HPC1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
My tnsnames.ora:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HPC1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
My listner.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = K:\app\badal\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:K:\app\badal\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = HPC1)(PORT = 1521))
ADR_BASE_LISTENER = K:\app\badal

Hello Sagar ! Here is the result after startup
C:\windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 03-MAR-2012 11:39
:28
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 03-MAR-2012 11:11:08
Uptime 0 days 0 hr. 28 min. 23 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File K:\app\badal\product\11.2.0\dbhome_1\network\admin\list
ener.ora
Listener Log File k:\app\badal\diag\tnslsnr\HPC1\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=HPC1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\windows\system32>sqlplus system/password@ORCL
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 3 11:41:03 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

HT201263 Help please! Problems with iPhone 4 after iOS 6 upgrade

Tried to upgrade iPhone. Got a message saying settings were lost, connect to iTunes. I did this and it said I had to restore. I did this and it said unable to restore due to unknown reason. Now phone keeps trying to upgrade and then restarts. iTunes doesn't recognise my phone.
I have tried all troubleshooting tips and nine work!
Please help!!

same here..it doesnt work for me too!!
exactly same issue. Apple got something wrong with iOS 6

Help Please! Connection problems!

Hello,
I received an Iphone3 yesterday from my friend as she no longer wanted it. When I was with her with the phone it would connect to her home internet fine with no problems, so didn't think i'd have an issue.
I've brought it home and it would connect to my Plusnet home internet connection. It wont even bring me up the option to connect or enter my password.
The internet will connect to my orange contract but i don't reall want to use that.
I don't know much about this technology and really no sure what to do.
Please help!!
Thanks
Charlotte

I Mean It wouldn't connect to my home Plusnet broadband

Help please. Trouble with a table

Hi All. Hope you can help. Looked through the Q & A but it's all about CS4 so no good to me as I have CS3. I am new to DW and trying to start my site. I inserted a table with 1 x row and 2 x columns. I first made the left column 160 px wide, and the rest for the main body. Inserted a graphic at the top of the left column to head the menu. Then I tried to insert another graphic into the body (right column) I could not place this graphic at the top because the cursor would only go half way down the image on the left. I tried doing various things and one image would go up and the other down or vice versa. It's driving me nuts :-)) Does anyone have any idea what I am doing wrong please?
Also, does anyone know of a site where I can get good tutorials in CS3 please/, without it costing me a small fortune. TIA
Regards
Jon

With your cursor in the table cell, set the verical alignment to Top in the properties panel. That will ensure that any images or text you place within that cell stays at the top no matter how the cell or table expands.
And not to be disrespectul in any way, this is a pretty basic function of table layouts. You are sure to run into many more troubles along the way unless you study up on tables and how they work in DW. So instead, I agree with the above response - you're going into a learning curve anyway, so you may as well apply it to CSS - I think things will even go quicker for you that way and you'll be building sites using the current and better technology.

Help Please! working with avi files.

I need to import an avi file (320 x 240) into FCP 3. The clip will be composited with a title that was originally in eps format which I have converted into a PSD file.
When I put them on my sequence it both need rendering. I have adjusted my sequence settings to match the files but still rendering is necessary.
The avi properties are:
320x240
30 fps
6.8 MB / S
Alpha : none/ignore
Composite: normal
pixel aspect: square
Compressor field is blank
Sequence Settings are:
320x240 Multimedia (large)
30 fps
Data Rate field is blank
Alpha field is blank
Composite: normal
pixel aspect: square
Compressor: DV/DVC Pro - NT
The PSD file also needs rendering to view. This is when they are just individually side by side on the timeline, not even stacked above one another. How can I get both the avi file and PSD file to play without rendering?
My deadline for this intro clip is tomorrow and I need help quickly!

I was going to wait till you bumped your post again.
Don't do that.
Please.
There are dozens of AVI codecs that have been obsolete for ten years and even more that never made it to the Macintosh. QT may or may not be able to open them. If you can play them, export from QTP to conventional DV and bring the newly created copy of the movie into a conventional DV sequence in FCP. There are other AVI conversion utilities.
bogiesan

Help please , cant connect my N70

Hello all
I cant seem to connect my N70 with my pc .
I'm running on vista , i have installed the latest pc suit but still no joy .
it says phone not connected
Any help will be great fully received
Many thanks
Ian

i gather you are trying to make a video call?
i think that possibly you should contact your network for a replacement usim

HELP PLEASE n97 connectivity with pc

Similar Messages

Maybe you are looking for