Help please PC wont start after i combined double sided and singlesided RAM

Can anyone help me please. I have a neo2 platinum board and 3200+ cpu. i used to have 2 X 512MB(double sided) ddr400 Ram PH brand. When i bought and added NCP brand 2 X 512MB(single sided) my PC wont start anymore. It just powers up for 1/2 a second then dies. I tried putting back my old RAM and resetting the BIOS but it still wont start.

thanks everyone i have isolated the problem...the culprit is the psu i have another problem though, after i bought a new psu, the vga card is not detected from time to time...i also get the BSOD upon exiting windows and I cannot access the BIOS, it just freezes after I press the DEL key.

Similar Messages

Sql server service wont start after disabling TLS 1.0 and SSL 3.0 on windows

We have been hardening our servers for some time now and recently we disabled SSL 3.0 because of the poodle attack. When I did this on one of our test servers SQL Server failed to start up after the restart.
I have been able to reproduce this on Windows Server 2012 and Windows 7 by disabling TLS 1.0 and SSL 3.0 through the registry. I am using SQL Server 2012 on the server machine. On my windows 7 machine sql server 2012 and sql server 2005 will not start with
those disabled.
These are the event log errors I get:
Application Logs:
(28/10/2014 8:38:54 AM) SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
(28/10/2014 8:38:54 AM) Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
(28/10/2014 8:38:54 AM) TDSSNIClient initialization failed with error 0x80090331, status code 0x1.
(28/10/2014 8:38:54 AM) TDSSNIClient initialization failed with error 0x80090331, status code 0x80.
System Logs:
(28/10/2014 8:38:54 AM) The SQL Server (MSSQLSERVER) service terminated with service-specific error %%-2146893007.
(28/10/2014 8:38:54 AM) A fatal error occurred while creating an SSL server credential. The internal error state is 10013.
Done anyone know have we can keep SSL 3.0 and TLS 1.0 disabled and get SQLServer server to start?

Hi Don,
I already have TLS 1.0 Disabled to prevent the BEAST exploit. So the values I have for:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
1.0\Server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
1.0\Client
Both have enabled set to ("Enabled"=dword:00000000).
If change both of these back to ("Enabled"=dword:00000001)
to enable TLS 1.0, and restart then SQLServer is able to start again. But we are now vulnerable to the BEAST attack once again.
If I keep server enabled and disable the client or vice versa and restart. Then SQLServer starts but I
am unable to connect to it. When I check the Event logs I get the same errors as my original past.
With your last post, do you mean to backup SCHANNEL and delete it so it gets recreated? If that is the case it will probably work because if I re enable SSL 3.0 or TLS 1.0 from here it fix's the issue, but I then I won't have the exploits patched and
we need this for some of our customers.
This is my SCHANNEL Export:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:00000000

Please help my ipad just rebooted after me turnng it on and it is in wat people call a endless reboot mode where it wont start up please help

please help my ipad just rebooted after me turnng it on and it is in wat people call a endless reboot mode where it wont start up please help

Hi Patkid27,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
- Judy

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

HELP PLEASE! I logged in with my iCloud account and merged her contacts with mine how can I undo this If i log out her contacts erase and stay on my iPhone and visa versa

HELP PLEASE! I logged in with my iCloud account and merged her contacts with mine how can I undo this If i log out her contacts erase and stay on my iPhone and visa versa

One of you will need to migrate to a separate iCloud account, then you can delete the other person's data from each account.
To migrate to a new account, start by saving an photo stream photos that are not in your camera roll to your camera roll. To do this, open your my photo stream album, tap Select, tap the photos, tap the share icon (box with upward pointing errow), then tap Save to Camera Roll. Then go to Settings>iCloud, tap Delete Account, choose Keep on My iPhone when prompted, provide the account password to turn off Find My iPhone when prompted, then sign in with a different Apple ID to create the new account and choose Merge to upload your data.
You can then each to to your iCloud accounts on icloud.com from your computer and delete the other person's data from your account.

The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
Ciao,
Antonio
P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

Help please, my Powerbook wont start after a crash...

Any help would be much appreciated as I'm in absolute panic! My Powerbook crashed after a modem/internet error and wont restart - the little light on the front 'breathes' until you open it and then it goes out when open. The restart/power button when held down will chime, then nothing happens - no restart. No lights or anything. The battery is charging, I've also tried taking the battery off and then restarting but still nothing. Am I not doing something really obvious? Can anyone point to what has happened, or is happening? Is it anything serious? Please help! Many thanks, JP

You could start in Single User Mode and do a File System Check (fsck).
Start the computer and hold down the s key until it starts.... it will be a text based interface. It should happen rather quickly.
After it is done displaying the start-up text.. you can type
fsck -f
remember the space between the k and the -
hit Return
you will have to type in your password...
It will check the disk.. and let you know if there were any errors.
If there are.. run the command again until it says "the file system is ok"
When you are done, type
reboot
then hit return
You computer should reboot.

Touchsmart tm2 notebook wont start after standby

I have a touchsmart tm2 that shot down after I started using it from stand by and now the notebook wont start, only the battery light is showing but it won´t do anything else

Hi
You have a couple of options as I see it please try these steps might help you to fix your issue.
Resolving Problems with Sleep and Hibernate Mode
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Garageband wont start after update to ilife 09

i update my ilife from 08 to 09, and now my garageband wont start anymore,it stucks everytime i start and the window "initialize" will not close.
at this point i try everything, delete the preference files in "user -libery-preferences" ,starting with apple -install-DVD and repair permission.
also delete garagaband 09 and re-install GB 08, after this and deleting pref-files again garagband 08 will start normaly
then i try again to update to Gb 09...and it stucks again when the app launch.
GB 09 will only shows the initialize window and stuck !
Please help

i had the same problem when i got my new macbook. I even tried to restore the whole OS then it finally works. But then it crashes again after i install some other program. I suspect the garageband 09 crash with some specific music program...but i still can't figure out which one. I've installed Garritan Personal orchestra, Emu 0404 driver, melodyn essential after that, i bet one of these program have problem.
What about you, have you got any other music program in your mac?

Help please PC wont start after i combined double sided and singlesided RAM

Similar Messages

Maybe you are looking for