HELP Please - playback issues

An Edge animation taken through Muse for framing, then through DW to add a line for audio play.... it is not displaying consistantly. On older explorer browser the background and frame show, the stage is white and the music plays. On an iphone the animation plays but there is no sound.
I'm not sure I got the audio line in the right place or if there is something else I messed up.
Review at http://www.savage-olsen.com/xmas2012/

There are no dumb questions.
I don't know all the ins-and-outs of YouTube's mobile technology, but you do have to click to initiate YouTube video. Whenever there's a YouTube video embedded on a page, you have to click the video for it to play. (note that it's video versus audio, but I believe the same user-initiated rule applies).

Similar Messages

Help please mic issues creative labs sound blaster

hi all i need help i have a creative 5. sound card with digital out only speakers. and when i try and use my mic on a system like msn it will not let me its like i have no audio from it at all. but if i un mute my mic it works fine but i can here my voice any help would be apreciated. I would love to be able to not here my voice in my speakers so as you can see my mic functions but i can here my voice. and if i mute it and try and use on msn i get nothing from it at all. is this because im digital out only but if i switch to analog i cant get sound as my speakers are pure digital. somone help please.Message Edited by cruser92 on 2-0-2005 04:00 AM

well i solved it with a simpl mic head set combo and switching from dig to analog all works great. and im now happy peace all case closed on my end.

Help Please -- Routing issue

Hi All...
I have a Linksys WRT54GL Broadband Router.
I have recently signed up for DSL.
I am trying to connect my DSL to the router, but it doesn't seem to work.
My DSL modem assigns 192.168.1.65 ip to my Routers internet interface, with a Subnet mask of /24 and default gateway of 192.168.1.254.
I have setup my Router to be a DHCP server to 3 computers with IP address range of 192.168.10.X (assigned dynamically). The Router's IP address is 192.168.10.1 (that is through which i can configure the router settings).
So my coputer gets ip 192.168.10.100, Subnet mask /24 and default gateway 192.168.10.1.
Now when i am in the routers web interface, i can ping all the websites, using its ping or trace route utility.
But when i try to access a website from my PC, i can't.
When i ping my routers interface ie 192.168.1.65 (that is the ethernet port connected to the DSL modem) from my PC i can but when i try to ping the DSL modems gateway 192.168.1.254 or any other website i cant.
So in a way i can only go as far as the ethernet / internet interface on my router and not beyond that.
Can anyone help me please.

Just did.. and no luck... I disabled Antivirus, and Windows firewall on my PC.. it didn't work.
I tried connecting to the net from the second PC... no luck. Did ipconfig /renew to get a new lease on the second machine.. got a new lease but couldnt connect to the net.
Same issue .... cannot get beyond Routers internet interface.
The routing table on the router looks like this....
Des Lan IP      SM    Gateway                Hop        Interface
192.168.1.0     /24      0.0.0.0                 0         WAN
192.168.10.0   /24      0.0.0.0                  0          Lan&Wireless
0.0.0.0          0.0.0.0   192.168.1.254     0          WAN
I am thinking more on the lines of routing not working, but then again i could be wrong. Any suggestions?Message Edited by japi_s on 05-11-200711:38 PM

Help, please - Firmware issues

I posted on Christmas on this forum about an iPod shuffle I had received for Christmas that was having Firmware issues. I connected it to the computer via the dock, downloaded iTunes, installed all necessary software, updated the iPod as necessary and sync-ed it. When I went to play it, I got nothing. The blinking lights told me that the firmware was damaged and it needed to be restored to factory settings. I figured out that I had not disconnected it properly from the computer after updating it (light was still blinking), so I connected it again and restored it to factory settings. Then I sync-ed it again. I did this a few times, always getting the same response from my iPod: firmware damaged, needs to be restored to factory settings. I thought I had broken it, but my dad (former techie) told me that if it had been restored to factory settings and it still wasn't working, there was something wrong with the product.
TOday we went and exchanged it. Here I am, sitting here at my computer. I updated the iPod as necessary sync-ed it with my music and I am ready to go. When iTunes tells me it's okay and the light on the iPod is no longer blinking, I disconnect it, restart the iPod, plug in my earphones, press play three times like the directions say I have to do to get to the first song, and...
FIRMWARE DAMAGED, NEEDS TO BE RESTORED TO FACTORY SETTINGS...
NO!!!
I restored it.
I sync-ed it.
Nothing.
I restored it again.
I sync-ed it again.
Nothing.
Now, I am here.
Is it me? Am I doing something wrong to it? Is that it?
Somebody please help me.
God bless,
Lissa

Figured out the problem... was sync-ing the iPod wrong. Doing it from library rather than the source list.

Help Please! -- issue with Mad Catz controller

Can anyone help me out here? I have a Mad Catz Wireless PC Con and I'm having trouble getting it to work. After plugging it into a USB port, when I go to the System Profiler and go to the USB section, the PC Con is listed as hooked up to the USB port like it should be, so I know the computer is reading it properly, but I can't get it to work. When I open the apps I want to use it with, the buttons don't do anything. The obvious reason for this would be that the PC Con isn't compatible with those applications, but that's not the issue here because I have an application (USB Overdrive) that allows joysticks (or controllers or whatever) to be set up to work with any application, and this always worked for me perfectly when I had Tiger. With Tiger I used to use the PC Con with the emulator applications all the time, but now that I've upgraded to Leopard, nothing happens when I hit the buttons. There were no decent instructions with the PC Con. Is there anything I need to to do install the controller first before I can use it or something like that? Does anyone have any ideas for me? Any help is greatly appreciated. Thanks alot.

In your Preferences menu, Type section, what Text Engine Option have you chosen?
-Noel

Help please, this issue has gotten me to the point of frustation!!!

so i downloaded PC Companion from the SE website, and it installed in my computer just fine...i'm currently running android 2.1 on my xperia x10 and the phone connects to the computer just fine too. the problem is that when i load up the PC Companion the dashboard doesn't load, so all i get is a blank page (i've included an image if it helps you help me). I've spent quite the ammount of time on this forums reading, and i found that there's a lot of people with other problems related to the pcsuite software, and i've found other people have the same problem that i have with this software. As i said, i've read as much as i could before posting this, and i've tried most of the solutions people have posted but nothing have worked for me, so i've just given up and don't know what else to do. Any help would be much apreciated, thanks in advance.
Attachments:
sepcc.jpg ‏49 KB

Hi all,
Thanks to Frukttime10 we identified and find a way to solve the problem.
For those who have the problem please do that:
1) Go in the registry (open a dos command and type "regedit"):
     a) Go to "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0" and verify the key 1400 has value 0 (if not change to 0).
     b) Go to "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet   Settings\Zones\" and verify that you don't have any "crappy folder" name, as in the attached example http://rapidshare.com/files/454333853/registry.jpg).You should only see folder 0,1,2,3,4. If any other folder with strange name is present delete the folder.
     c) Go to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet   Settings\Zones\0" and verify the key 1400 has value 0 (if not change to 0).
     d) Go to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet    Settings\Zones\" and verify that you don't have any "crappy folder"   name, as in the attached example http://rapidshare.com/files/454333853/registry.jpg).You should only see folder 0,1,2,3,4. If any other folder with strange name is present delete the folder.
2) Close PC Companion using the option "exit" from systray (right click on PC Companion icon in systray).
3) Re start PC Companion => Your dashboard should now be displayed.
If some of you still have the problem, please export the following registry key and provide it:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Hope it helps.

Help please! Issues with Superdrive.

I was ahving huge issues with my MBA these past days. Now I was able to boot with the OS X dvd and reinstall the OS. the installation went well, but now I have an eject symbol in the upper right corner of the system bar and it seems my USB port is either fried or locked. I can not use any other USB devices (wanted to hook up to my external HD to backup all my stuff and then zero out my MBA and clean install). its strange. I can restart the MBA pressing C and then the Superdrive runs. Guess this speaks against the USB port being fried.
Would appreciate any help given soon!!

Sorry if this is too basic and you have tried it but here goes:
to eject the superdrive select the icon for it on the desk top (with the s-drive connected) then press and hold down the eject button on the keyboard upper most right on keyboard.
You may even need to have the disc in the drive but I doubt that.
Or go to iTunes or Finder, select the drive and eject from there.

Someone help please, major issues 10.5.2 power

Alright, this all started with 10.5.2, and I've already been to the apple store once. 10.5.1 was running pretty good.. had a few problems but nothing major.. upgraded to 10.5.2, and issues have slowly escalated.
Issues.
1. wouldn't boot with my cinema display plugged in for the first week after I upgraded. even after reseting pram. then all the sudden it began working properly.
2. the green light on my charger cord lights up at about 1/10th it's usual brightness.
3. my battery, that had 14 cycles, and was only 7 months old, went from having 95-96% health before I upgraded to 10.5.2, to 60% health a week later. (so low in fact that apple kindly replaced it with a new one at the apple store, he even agreed that it was incredibly low for the cycle count. but unfortunately I believe the problem lies elsewhere).
4. I noticed there was something wrong with the battery because when I was running off of it, it would run down to about 48% and just flat turn off with no warning, actually causing a loss in a couple files. I haven't tested this with the new battery yet as I'd like to do some research (this) first, and frankly try to figure out what else could be going on.
5. this is another major one, I can't put my computer to sleep because, sometimes it doesn't wake up, and when it wakes up(75% of the time) my external HD fails to work.. what I mean here is that it continually kicks over trying to spin up... and then it says I removed the drive without ejecting it when I didn't.. I know you're thinking this could be unrelated, and hard drives die all the time.. but I assure you this HD is in perfect working order, even according to techtool pro 4. it's only 6 months old, and when I turn it off, unplug it's power and re attach it again, it starts up fine and works again, it's the sleep that's messing it up.
So, that's my main concern, I have 700+ gigs of really important info on my external and I'm afraid it could just get fried somehow.. I can't afford a new external.. has anyone ever heard of these things before? as for specifics, this is a santa rosa macbook pro 2.4 ghz, 2 gigs of ram, a 30 inch cinema display, and a dual bay external hd.
thanks

savager wrote:
Alright, this all started with 10.5.2, and I've already been to the apple store once. 10.5.1 was running pretty good.. had a few problems but nothing major.. upgraded to 10.5.2, and issues have slowly escalated.
Issues.
2. the green light on my charger cord lights up at about 1/10th it's usual brightness.
Did you show this to the people at the Apple Store? This sounds like a hardware problem and appears unrelated to any external hard drive.
3. my battery, that had 14 cycles, and was only 7 months old, went from having 95-96% health before I upgraded to 10.5.2, to 60% health a week later. (so low in fact that apple kindly replaced it with a new one at the apple store, he even agreed that it was incredibly low for the cycle count. but unfortunately I believe the problem lies elsewhere).
This sounds like it could be caused by #2.
Take it back in to the store and try it with a different power brick. I think that might be the problem.

Help please, sound issue P965 Platinum

I have this mobo MSI 965 Platinum. It works well excepting one (annoyng) thing: when I record something (via tv tuner or via fraps) the recording has no sound!
I tried to capture a movie while playing Oblivion. In Fraps I checked the "record sound" box, I assigned a hotkey and proceeded. Everything's fine while recording. Then, I open the movie and it's perfect, excepting it's mute!!!
Then I tried to record a tv program with my Leadtek USB 2 deluxe tuner. The image of my recording is excellent, while there is no sound!
Is there a method to find out what's wrong?

I'm having the SAME problem! if you press your space bar to pause during iMovie full screen playback, and then press space again, the sound should come back, but it still will not work correctly when exporting the video to iTunes and such. Keep you eyes peeled for any answers I receive for my question, I think we are having the same problem here!
http://discussions.apple.com/thread.jspa?threadID=2408970&tstart=0

HELP please - NWDS issue: Customized application based on 'vanilla' SAP DCs

Hello,
I am about to deliver a SAP Web-Channel solution and therefore I have to make some developments on the 'vanilla' application as nothing is perfect as it comes out of the box. We have setup all tracks to download & build the SAP standard application (Java, WAR und EAR part), but I do not want to modify the DCs directly instead I like to create my own DC to add my developments on top.
What I did within the NWDS
1. I have downloaded the WAR, EAR, and java SC from the NWDI
2. I have created my own DC such as "CUST/ISA/WAR"
3. I have assinged the original war "crm/isa/web/b2b" as Used DC
I performed the build, but when I take a look in the generated WAR file, the source code / JSP files are merged with my own - instead I can find the used DC as JAR file within the lib folder.
I also followed the instructs as described in the published PDF: How_To_Create_Custom_App_ECO5200.pdf
I almost tried everything, but I can't see any obvious difference to the setup as SAP did. The original WAR project from SAP also depends on other DCs, which includes their JSP files, but I can't find the difference to the steps I did ..... PANIK!
Does anyone know what could have went wrong?
Cheers,
Andreas

Problem solved. I just figured out that I need a postbuild.vm within the "cfg" folder. To figure that out, it almost drove me crazy. There is no documentation available and it is getting more trick if you have to retrieve code from a WAR project and not a Java Project as the component is not listed within the dependencies, which are required for the compilation.

Help please error issues were not even opened the program

There was a problem with the license try restarting your computer! I rebooted and it gives the same error 213: 19 Do not know what to do help

GP70 2PE Leopard HELP PLEASE SSD ISSUE

A small update and semi-bump:
I can now enter Steam after a few tries to login. However, when i try to play games (for instance DotA2), the problem is the same as with non-steam games (like Heroes Of Newerth) -I can log in to the game itself, but when ...

Quote from: snowsak on Today at 21:50:11You cant really put any intake fans where the 2 side grills are cause they hit on graphic card.Need some old time classic cable management with duct tape and tie wraps :agr...

Final Cut playback issues...help please!

I've been running FCP7 on my Mac Pro for over a year now with no issues.
Recently I purchased a pair of Dell U2410 Monitors to work on, and this is when I really began to notice playback issues in FCP. Although I just started noticing it with the new monitors, I have a feeling it is related to my FCP or my graphics card. The issue ONLY happens within FCP, video plays fine once exported.
Specs on the machine:
Mac Pro 3,1
2 x 2.8 GHz Quad Core Intel Xeon
10gb RAM
NVIDIA GeForce GT 120 - less than 6 months old.
Here is a link to the video playback compared to the exported QT. As you can see there is some crazy horizontal issues with the video playback. It happens with all formats and resolutions of video.
I've tried trashing prefs and reinstalling FCP with no luck. It happens all over the area of the video, not just top or bottom. Sorry I had to film it because it's not visible any other way. This happens with files playing off my main HD and external drives.
Any help is greatly appreciated, it's really a pain to edit when the playback is like this. And no, I don't have Apple Care and am too late to get it:(
Video:
http://www.vimeo.com/19307100
Message was edited by: atlfokus

Are you using one of these computer monitors in a Desktop Cinema Display mode?
If so, this is not the way to monitor your material for any QC. You need a qualified device to export a video signal to a proper monitor.
You could use one the 2410s to see what things look like if fed through a Matrox MXO2 mini.
x

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

WINDOWS VISTA ITUNES VIDEO PLAYBACK ISSUE!!!!!! AAHHHHHHH!!! HELP!!!!!!!!!!

am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.

hi slideaway!
my computer has a right proper meltdown, switching itself off and restarting to a "Windows has recovered from a serious error" sort of message.
good lord. are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

HELP Please - playback issues

Similar Messages

Maybe you are looking for