Help please !!! please write back
Hello i have a zen micro. I am trying to use WMP and i riped the cd to my comp and then i synced it but when it is done the songs are on the micro but no sound.. please help... i am going away and would like to have it..
Its great that you give your opinion but swearing is not needed. However it is very annoying if you post this all over the place. As for your problem have you tried to rip the music with anouther program? You can rip the cd directly to your player with the zen micro media explorer. Try this.
Similar Messages
-
My phone is stuck between off and on. It has a white, slash circle going around and around. The button on top doesn't seem to do any good. The phone is only 31 days old. Please write back, I can't use it to even call in an emergency. Thank you
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
--JaySwannyUser Password Reset
-
TS3992 help please with backing up photos
hi im trying to back up only my photos onto icloud and ive copied all my previous images from the icloud and put them on my computer but it now says that it cant back up 'cos i need an additional 3.7gb. is there any way of saving the first 5gb of photos first? and then doing the 3.7 afterwards? please help thanks Haidee
The easiest way to put your photos in large numbers onto your computer is to connect the iPad to it with a USB cable and import them into your photo software.
-
Need help please Ipod backing up
Alright my ipod isn't working right talked to a tech support from apple for 45 mins to try to fix it and the conclussion was as follows:
I need to send it in and have them repair/restore it.
Go to support forums and find a 3rd party program
while in disk mode restore ipod myself
I have a warranty but the thing is I have not got the chance to back up my 17 thousand songs or videos or pictures yet. I am in the Marine Corps and I move around a lot and I have not yet purchased my own computer so I never backed up my ipod. anyway to keep this short basically my ipod only gets reconized by itunes if its in Disk mode and I get a error message saying:
Itunes cannot read the contents of the Ipod "Mheuser IPO" go to summary tab in ipod preferences and click restore to restore this ipod to factory settings.
Thing is I don't want to do anything until i back up my files someway somehow do any of you know a program or anything out there that I can use to get my songs/video/pics off my ipod before I send it in? ALL and ANY help will be greatly appreciated.Check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
The bottom line is that any method you choose depends on the iPod and it's contents being recognized by the computer.
Good luck. -
HT4623 I'm stuck on 'Rescue Email' entry - NEXT does nothing. Help please!
I'm stuck on 'Rescue Email' entry - NEXT does nothing. Help please!
Back
Entering my current apple id email address results in an error message, so the buttons all work.
Thing is vapor locked and phone is unusable!
Help please!this is under the apple id security section...it would not let me select not now so i have to use this set up security...i set up my questions and now i am at the end and its asking for the email....
-
After updating my computer, my iweb is not opening...please help me get it back!
after updating My computer, my iweb is not opening...please help me get it back!
Verify that your domain file is located in your Home/Library/Application Support/iWeb folder which will be invisible. However,
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Next:
To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
Since iWeb has discontinued by Apple the new systems don't handle the iWeb preference pane as it was in earlier. The script corrects that situation and once you open the domain file the first time you can just use iWeb to open it from there on. However, you'll need it if you plan on using more than one domain file. And adhear to the warning above. -
Write Back - The system was unable to generate appropriate SQL. Please cont
Hi I am facing the below error while implementing writback feature in obiee 11g.
The system was unable to generate appropriate SQL. Please contact your system administrator.
Template: 'update OBI_DEV.W_PRODUCT_D_WRITE_BACK SET MON_REL_TARGET = '@{c5b2e8f4d057e4201}', MON_GROSS_TARGET= '@{ce74545331e56f0bc}' where PRODUCT_FAMILY = '@{c9a6eeb6940647d1b}' and PRODUCT_TYPE = '@{c037fcc09911be97b}' and REGION = '@{c0bc248e1e2c13fc4}''
Record: '<record type="update"><value columnID="c0c5d0de6e8463149"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">PROD_A</sawx:expr></value><value columnID="c9a6eeb6940647d1b"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">DP_CO</sawx:expr></value><value columnID="c037fcc09911be97b"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">Commerical Product</sawx:expr></value><value columnID="c3805a6285c2d923d"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:string">INTL</sawx:expr></value><value columnID="c0bc248e1e2c13fc4" type="update"><newValue><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:decimal">3</sawx:expr></newValue><oldValue><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:decimal">2</sawx:expr></oldValue></value><value columnID="c5b2e8f4d057e4201"><sawx:expr xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xsd:decimal">6</sawx:expr></value></record>'
============================================================================================================'
here is my XML Template.
<WebMessage name="Writeback">
<XML>
<writeBack connectionPool="Oracle DataWarehouse Connection Pool Write Back">
<insert> </insert>
<update>update OBAW_DEV.W_PRODUCT_D_WRITE_BACK SET M MON_REL_TARGET = '@{c5b2e8f4d057e4201}', MON_GROSS_TARGET= '@{ce74545331e56f0bc}' where PROD_FAMILY = '@{c9a6eeb6940647d1b}' and PRODUCT_TYPE = '@{c037fcc09911be97b}' and REGION = '@{c0bc248e1e2c13fc4}'</update>
</writeBack>
</XML>
</WebMessage>
Thanks
Kumar
Edited by: 877408 on Jan 9, 2013 7:57 AM
Edited by: 877408 on Jan 9, 2013 7:58 AM
Edited by: 877408 on Jan 9, 2013 8:11 AMHow about following line between the tags <WebConfig> and </WebConfig> in the instanceconfig.xml located under $INSTANCE_HOME/config/OracleBIPresentationServicesComponent/coreapplication_obips1:
<LightWriteback>true</LightWriteback>
Restart Presentation Services
And check the write back permissions in Analytics->Administration> Manage Privilege as shown below:
Just in case also check user has write access
If helps pls mark else update
Try with no space between tags like <insert></insert>
Edited by: Srini VEERAVALLI on Jan 9, 2013 10:46 AM -
Haven't got the button "write message" in mail, help please!!
Please help, I cannot write any message on my iphone, there is no button " write new message", only "inbox" etc...may be someone know about this problem. Thank you
The new messages icon is located in teh bottom right of the screen, and should be visible in pretty much any screen except when replying to an email or if you already have a new email open. http://help.apple.com/iphone/7/#/iph3caef30a
If you don't don't see it, Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset. -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh -
back up iPhone 3G contact while updating IOS to IOS 6.1.3
then contact lost on iPhone
& cannot restore contact from last backup that appear on iTunes-files!: it is grayed (not pickabble!)
this is scary ! not ipressed by mac for once!
help please!Well Hello,
maybe 3GS as your question indicates that only S update should work, and it works, but now only my name appear in contact! wao! -
My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...
There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote. -
I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I can't figure out how to get the music on my iPhone5s to shuffle. If I use the arrows to skip a song, it shuffles through a handful of the same songs then goes back to the song menu. Help please!
Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.
-
Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer...
Maybe you are looking for
-
Find difference between two numbers (DBL)
Hello All, Is there a function in labview other than subtraction function that can find the difference between the two given numbers? Thanks, Davidson Solved! Go to Solution.
-
Converting a Music Video to Audio only (music)
I have a music video (mpeg4 format I believe) and I would like to convert it to audio. It is a clip (video) of a song from YouTube and I would like to just listen to it on my iPod. I was also wanting to add lyrics to it but seen that I could not add
-
Authorizatoin error while viewing adapter engine messages
I got below error from user and need to resolve. When I try and view adapter engine messages in XI Development system, I get the message "noAuthorizationJava"
-
ADDT Datepicker and Spry:region
Using ADDT for a datepicker dropdown calendar, the following code works as expected: <form action="" method="post"> <input name="test" id="test" value="06/02/2008" wdg:subtype="Calendar" wdg:mask="<?php echo $KT_screen_date_format; ?>" wdg:type="widg
-
Hi All, We are implementing hierarchy node based authorizations for our BPS and related queries and it works fine. We have 300+ nodes and for this we would require a role for each node of the hierarchy (that would be 300+ roles). Now we are planing t