HELP! PLEASE READ THIS!

Hi,
Before posting your question in this forum, please make sure that you:
1.looked at the Portal FAQ: http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm
2. searched through the archive
Chances are that most of the questions were answered before.
This will help us, a lot, to eliminate the duplicated questions answered over and over again, and will save more time to answer new questions.
Thank you!
Dmitry

Thanks for all the help roam!! You hear about hard drives crashing, but you never think it will happen to you, until it's too late. Unfortunately, that happened to me today... but, I bought an external hard drive a few months back and had backed up the majority of my important files at that time (THANK GOD!!). I had a ton of music on my iTunes, photos in my iPhoto, and TONS of favorite bookmarks organized in my Safari that I'm pretty sure were not backed up on my external harddrive (but at least all my graphic design files were saved on my external). I think I'll chalk this one up to the lesser of two evils and count my blessings. It could've been much worse than it is. Thanks again though for your assistance.
Take care,

Similar Messages

Guys I need help please read this and try to understand it

I want to know that what does a new driver has to do with modem that it makes noises like "click click" during the gameplay...
Right now i am using the old version that came with the box.It is 43.45 that has been released almost an year ago.Believe me guys it works almost perfect no noise and nothing.
If i come into 2004 then the latest version is 56.72 .I've heard that nVidia has uploaded this driver on april 1st (Happy fool day from nVidia). Thus guys i wish to come into this new year and i want to update my driver,and when i install this driver it will give me trouble from the modem. Couple of more things i have checked and they're the driver that came with the box is by DETONATOR and these days the drivers says FORCEWARE and the second thing is that the old software that comes in CD from nVidia doesnt contain "DIGITAL VIBRANCE" but all new drivers has it. Could this problem is from here? I am totally puzzled first i thought that there is something wrong with the graphic card but when i checked it was modem.When i changed the modem same problem.I changed the slot, same thing. Thought there is a virus or spyware but there was not.Hardware is ok because old version is working fine.
PLEASE GUYS I NEED ALL OF YOUR SUGGESTIONS DONT IGNORE MY PROBLEM
GRAPHIC CARD is MSI nVIDIA FX-5200
MB is MSI 865P-NEO
Modem is CONEXANT
One more thing i want to mention
if i turn on pc and start playing games(any 3D games) will run perfect on any driver whether it is new or oldest. But if i connect to internet with modem and later disconnect it and then start playing games or any 3D presentation the modem starts crying (CLICK CLICK) and this is the same sound that comes when we start connecting(dialing, probably when it gives signal) the internet.
In this situation i have to completely turn off my pc and also unplugging it (DISCHARGING ELECTRICITY). and then, when i turn on the pc and start any game without connecting to internet everything runs fine (On the new drivers)....
Now as i have mentioned before i changed the slots removed and even reinstalled.Nothing happens just a click click sound.
but for the old driver everything runs fine even if i am online and watching 3D presentations or playing games....
So anybody ????????????????????????

assuming its a pci one as he suggests it may well be an irq thing
try playing swap the pci slot with it
'

Ipod not connecting again, apple please read this.

First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.

Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really).

Hello Creative Cloud Illustrator Community. Help Please! This is with regard to compound paths and transparencies. I have set some type on a circle and then created outlines. I then placed the outlined type on a black stroked ring which I then selected "o

Hello Creative Cloud Illustrator Community:
Help Please!
This is with regard to creating a compound path:
I have set some white type on a circle and then created outlines. I then placed the outlined type on a black stroked ring which I then selected "outlined stroke." I then put both "outlined" graphical elements on a separate solid bkg. (all 3 are on the same layer). Lastly, I then selected the top two elements and went to "make" a "compound path" (because I want the type to be the "holes" so I can see through to the background). However, the only effect I get is the white outlined type turning black (the same color as the black ring). What am i doing wrong? I can achieve the desired result with simple boxes but it won't work with a circular type path, a stroked ring and a solid bkg.
Any help on this would be greatly appreciated!
Thank You!

Thanks for the response Jacob.
Unfortunately, I tried your suggestion with no success. BTW, minus front is now Subtract. Apparently, by clicking option>subtract, it works in the same way as minus front. I tried this to no avail.
Let me reiterate please.
I have 3 graphic elements-all on the same layer:
1. Background: Gold circle with a fill and no stroke.
2. Middle: Black ring (Stroked) inside gold background circle.
3. Top: White copy set on a circular type path and placed directly on top of middle black ring.
Both the middle black ring and top type path HAVE BEEN CONVERTED TO OUTLINES.
LASTLY, I select the Middle and Top, go to Compound Paths and choose "Make" and my white copy turns to black. Wrong!
WHAT I WANT TO HAPPEN: I want the white copy to become HOLES, so the GOLD background shows through.
Any solutions would be very much appreciated!

HT4967 "In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.

Sorry. This is where my question should be....
"In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.

Have you enabled iCloud syncing for calendars on your mac, which requires OS X Lion (10.7.2)? See http://www.apple.com/icloud/setup/mac.html.

Can any body please read this and ans me

hi all,
can any body please read this and tell is there any function module or some other thing is available.
Material masters are location specific, and Progistix maintains part details in Canadian $, now we need to get the logic how SAP converts the standard cost of the material from Canadian $ to US $
The plant number of Canada is 3002.

Hi
you would have to use the following function modules
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
regards
Dinesh

Please HELP me read this file....!

I am having trouble reading the file input.dat using this code that I wrote. It compiles without errors but I get an ArrayIndexOutOfBounds Exception when i run my program.
public void Read(String fileName) {
                try {
                        String num;
                        String cells;
                        FileReader file = new FileReader(fileName);
                        BufferedReader in = new BufferedReader (file);
                        num = in.readLine();
                        number = Integer.valueOf(num).intValue();
                        co = new ClassObject[number];
                        pair = new PairObject[number * number];
                        System.out.println("There are " + number + " total classes");
                        int cno = 1;
                        int x =0;
                        int y =0;
                        while (in.readLine() != "*") {
                            for (int b=0; b<number; b++){
                               co[b] = new ClassObject();
                               co.className = in.readLine();
co[b].classNumber = cno;
while (in.readLine() != "$"){ //problem occurs here
co[b].classAttribute[x] = in.readLine();
x++;
while (in.readLine() != "#"){
co[b].classMethod[y] = in.readLine();
y++;
cno++;
} catch (IOException e) {
System.out.println("Warning: Cannot Read File");
System.exit(0);
}and here is my input file (input.dat): 5
class1
int someInt
$
getInt()
class2
String anyString
$
getString()
class3
int value
$
setValue()
class4
char someChar
$
getChar()
class5
float someFloat
$
getFloat()
* thanks so much for any help!

Hi, I changed some part of my code but I am still having the same problem. Here is my new code, hopefully somebody can help me figure this out String line = in.readLine();
while (!"*".equals(line)) {
      for (int b=0; b<number; b++){
       co[b] = new ClassObject();
       co.className = line;
co[b].classNumber = cno;
while (!"$".equals(line)){
co[b].classAttribute[x] = line;
x++;
while (!"#".equals(line)){
co[b].classMethod[y] = line;
y++;
cno++;

Please read this on the Nokia Updater - Important ...

Hi All,
Well - it looks like you have really taken well to the new Nokia Software Updater. We can also see that there is a little bit of confusion about the service in its present state right now.
So... We got an email from the NSU team that gives a bit more info on the topic:
The Nokia Software Updater checks which software is available for your particular phone by comparing the software you currently have with latest software assigned to the 7 digit product code of your phone. If newer software is available for your 'variant', it will be downloaded.
In case the Nokia Software Updater says no new software is available but you believe this to be incorrect, please post your product code to these boards.
Many thanks for your help,
The Nokia Software Updater team
Your product code can be found on the label in the battery compartment (e.g. 0501234).
So, if you do run into problems, it would be a really great idea to let Nokia know what your product code is. If you find yourself needing to call or email Nokia on the topic - please include this code so that our support teams can get straight down to helping you out.
Please do not forget, the Discussion Board itself is not here to provide direct support, so if you have an issue and post here the NSU team may see it, but they will not be able to get back to you directly. If you need one to one support - please get in touch via phone or email.
Cheers
KarimMessage Edited by vandelay on 30-Oct-2007 02:12 PM

Greetings everyone.
I contacted Nokia Support, and they sent me some info on how to get support locally some days ago. However, I plugged my phone again today and voila! to my surprise, it detected the new firmware and right now that I'm typing, I am updating to the new version.
I'm not sure but I think I should thank Nokia Support for registering my Product Code and certainly for responding to my request in quite a short time.
I should also thank all the other guys who gave me help on this issue, specially scoopyman.

Please read this before posting?

First of all we need your stats so we can determine if or not their is an issue:
Please use this link http://192.168.1.254 to go to your hubs homepage:
(Heres the direct link! http://192.168.1.254/index.cgi?active_page=9116 )
Then click on Settings:
Then go to Advanced Settings:
then go to Broadband:
then go to Connection:
and then please copy and paste your adsl stats making sure you expand to show all details:
We need to determine whether you have a throughput or speed or IP profile issue, there is only one official speed tester that BT will accept for speed test and you need to go to http://www.speedtester.bt.com and then type click on the ADSL/FTTC option:
and then type in your phone number, wait for the results to be displayed:
and once the results have been displayed with your IP Profile please copy and paste the results to your post.
Also searching your exchange on http://www.samknows.com/broadband/exchange_search , this is not neccessary but can sometimes help.
Always make sure you try changing the filters this can be a common problem. If you have a mastersocket with a split front then unscrew the bottom bit and behind there should be a hidden test socket, you usually should try to test your broadband in there to make sure your internal wiring ins't causing interference this can be one of the highest common factors of slow broadband. Usually your broadband will be dependant on your line length from the exchange which will be based on your attenuation, so if your far from the exchange your not likely to get a great speed on ADSL.
Also dialling 17070 and pressing Option 2 to do a quiet line test will show if you have any noise on your line. If there's any noise on your line, try changing your filter's first and then call (0800 800) 151 and report a line fault don't mention broadband and go from there.
Happy posting!
Regards Edd
Check your Line
BT Speedtester

Although I appreciate the sentiments and would speed the initial diagnosis. I do feel it would put some members off, in particular ones who have had a issue for some time and more so customers who have had the "helpline" experience and have been passed pillar to post. Being directed to another link comes across for me, as a bit "helpline". I feel at this point, many would want some 1 to 1 (therapy) and they are being listened too with regards to there broadband issue.
I've seen users irate very recently, just by a simple request of hub stats posted by copy & paste. We all do it, however it can come across, corporate avoidance (helpline). At times I have PM, something similar with regards to our end responsibilities, depending how I believe, they are presenting themselves on the forum
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Further info on 6980 printer problems please read this one

I have a HP 6980 deskjet that I attach via usb to my macbook when I need to print. Everything has been working fine for a year now except yesterday it gives me a message "problem printing to printer, please check that the printer is chosen in the print centre......" this is not exact but pretty close. I can post the exact message later when I am at home and can check it. Does anyone have any idea what may have caused this to happen so randomly? I never did install a driver or the CD because when I plugged the printer in, it was just there automatically (which I thought was just awesome). Anyway - any help will be much appreciated
Tried to install the driver from CD and I got the message " The software to be installed requires administrator or higher level access privileges" I had the right password and have installed other software - what's up with this.
I tried to add the printer again after removing it from my list. This is the message I get when I try to add the printer - "An error occurred while trying to add the selected printer successful - ok - cnflicting attributes.
This is the error message I would receive when the printer was available before I removed it - Word cannot print due to a problem with the current printer. Make sure you have a printer selected in print centre. You may need to print again or adjust your printer settings.
I haven't had one problem in the year that I have had this printer and it is not a problem with the printer as it will work when connected to other computers. HELP PLEASE!!

no replies...

Please read this post

Hey Guys, I just wanted to share something with all of you, this forum does not get enough attention from the people who already know how to use the full strength of Java3D, and since there are so many unanswered questions here, and I'm sure most of them are solved by the authors them selfs, please do waste 5 min of your valuable time and post what you find as the best way to solve your problem, because we are here to help others as well, so please do.
and if any of the admins would please write this in nicer words and put it as a sticky or constant thread that would always stay first in the threads list, that would be great and most probably benefit us all.
Thanks in advance,
Adam Zehavi.

isn't there any admin to write something here to stay at the top of the page?? come on, this might really push people to post their solution for many problems, I mean look at the threads... most of them has NO replies, this does not make any sense these people didn't just gave up, they found a way and solved their problems, so I would not repeat myself I've made my point on the first post....

MSI TV Tuners - Please Read This Topic First!

Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codec

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

Would an Adobe Staff Person please read this?

I'm wondering why Adobe has never fixed a problem that has been frustrating to me and other users for years. If you try to use the Upload button in the Files panel to upload a file to your website you frequently get a Waiting for Server message and the upload often times out.
If I do the identical task at the same time in Transmit, the file uploads in a few seconds.
I've drawn attention to this problem several times, both in this forum and by posting Bug Reports to Adobe.
So far, year after year, the problem has not been fixed.
If there's a staff person who reads this, would you please find out whether or not this defect is ever going to be fixed?

Thanks for your help. I'm aware that Passive is the best connection.
I sent a bug report to Adobe and, to my suprise, got a reply. But the workaround is disappointing. It basically says "wait longer".
We would like to let you know that we are aware of this issue and have an internal bug # 3561917 for this. We are working to prioritize it for fixing.
Please try the steps mentioned below:
1.       Launch Dreamweaver CC
2.       Go to menu “Dreamweaver -> Preferences…” to open the “Preferences” dialog
3.       Go to “Site” category in “Preferences” dialog
4.       Increase the value of “FTP time out” from 30 seconds to a higher value, let us say 180 seconds
5.       Click “Apply” and the “Close”.
Now you can try out your FTP scenarios.

First please read this- applet not initialized

I read forums topic which is relational with applet errors but I couldnt solve my problem.
I developed a program with php and mysql.there isnt any printing library for php under linux.so I am using an applet for printing.I could use javascript but I dont want to show printer dialog so I chose java applet.in my htdocs directory I put class file and all other php files are there too.when I want to run this php file which has inside applet tag it shows me "applet not initialized".so can you help me for this?that applet works on my pc but in server it didnt work.what is wrong with server or apache?I set up j2sdk to server too but I couldnt solve this problem something wrong with apache maybe it cant find the class file or do I have to recognize java files to apache like php?
it is really important for me.if you can help I ll be glad.thanks for all

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

ATTENTION ALL 27" iMAC OWNERS: PLEASE READ THIS THREAD

Hello. Firstly, apologies for the attention-grabbing title, but ultimately I need as many people to test this out as I possibly can.
Here's a basic run down of my problem: if I leave a window open on my display for about 10 mins, and then minimise it, and bring up a dark grey background such as iPhoto, Spotify, or a set desktop flat colour of dark grey, I can still see the text and display pictures semi-burnt into my screen, temporarily. They do fade after a while, but it is still annoying that it does this (I am a graphic designer, so I could potentially be working with dark images, and I don't fancy seeing my facebook messages over the top of my work).
I had this issue with the iMac which I purchased last Thursday, and I returned it to Stormfront (my local Apple Authorised Reseller) and they acknowledged the issue and gave me a completely new iMac. However, yet again, this computer has the exact same issue, which makes me think it may be an issue with quite a few of the 27" iMac's.
Therefore, I would like to ask if you, as the owner of a 27" iMac have a few spare minutes so that you can help me find out if this is a rare issue and I've just been unlucky, or if it's a wider issue with several iMac's.
Please follow the step by step guide I have created below: the burn-in effect image is not a screenshot, however I have recreated the effect on Photoshop so you know what to look for. Thank you in advance for reading this, and helping me out; please let me know what results you get from this test.
I am especially interested in users of the current Thunderbolt 27" iMac, with the high-end spec (3.1 GHz Intel Quad Core i5/4GB RAM/1TB HDD/Radeon HD 6970M HD). Please, if you own a different model also carry out these tests - your screen may have the same issue.
Step 1: Change your desktop background to a dark grey colour. Go to System Preferences > Desktop and Screensaver > Desktop > Apple/Solid Colours > Cutom Colour... > Using the greyscale slider under the second colour picker tab, enter a value of around 15%. Set this as your desktop.
Step 2: Open a white-backgrounded application. Position it somewhere on your screen (preferably the left as this is where I experience it at it's worst), and leave the application there for around 10 minutes.
Step 3: Once 10 minutes is up, minimise the window, and study the area where the window was. If you have this issue, you will still be able to make out the elements from the open window (in my case, my Twitter followees display pictures and tweets). Here is a mocked up version of how it appears, created in Photoshop. As the issue is hardware related (I think), it doesn't appear in screenshots. You can view this image at full size here: http://cl.ly/AZYD.
Step 4: Please let me know the result, and the specs of your computer. I am contemplating phoning Apple to make them aware of this issue, but wanted to see if it's just me before deciding it's a hardware issue.
For me, I think I'll wait until the next Lion update is released, in case it offers a graphics driver update. Otherwise, I guess this one will be going back too.
Thanks guys, and I await your responses.

What you are seeing is called Display Persistence. All LCD displays have a certain amount. Some less some more. This includes models from the same build. I have linked Apples response to what your seeing. I did the setup you said and saw no persistence on mine. If I had let it set longer I am sure it would have shown up.
Apple: Avoiding image persistence on Apple LCD displays
These are my iMacs specs.
Model Name:iMac
Model Identifier:iMac12,2
Processor Name:Intel Core i7
Processor Speed:3.4 GHz
Number of Processors:1
Total Number of Cores:4
L2 Cache (per Core): 256 KB
L3 Cache:8 MB
Memory:8 GB
AMD Radeon HD 6970M:
Chipset Model:AMD Radeon HD 6970M
Type:GPU
Bus:PCIe
PCIe Lane Width:x16
VRAM (Total):2048 MB
Vendor:ATI (0x1002)
Device ID:0x6720
Revision ID:0x0000
ROM Revision:113-C2960K-152
EFI Driver Version:01.00.507
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth:32-Bit Color (ARGB8888)
Main Display:Yes
Mirror:Off
Online:Yes
Built-In:Yes
Connection Type:DisplayPort

Please read this before posting any new questions about NRL

Getting your NRL questions answered quickly and effectively is really important to us, before you post any new questions, please check out the existing conversations or below links for an answer to your query.
There is also a host of information available at http://www.nrl.com/ however we'd suggest you take a look at the support material provided here as many freuqently asked questions have already been answered.
We've also taken time to create threads with common questions for you. Check them out below:
General FAQs
Digital Pass FAQs
NRL App FAQs
Tipping & Fantasy FAQs
Streaming FAQs
NRL App Troubleshooting
Laptop troubleshooting
If you still need a further hand or can't find what you're looking for, one of our friendly 24x7 support team will be happy to help, please post your question here

Although I appreciate the sentiments and would speed the initial diagnosis. I do feel it would put some members off, in particular ones who have had a issue for some time and more so customers who have had the "helpline" experience and have been passed pillar to post. Being directed to another link comes across for me, as a bit "helpline". I feel at this point, many would want some 1 to 1 (therapy) and they are being listened too with regards to there broadband issue.
I've seen users irate very recently, just by a simple request of hub stats posted by copy & paste. We all do it, however it can come across, corporate avoidance (helpline). At times I have PM, something similar with regards to our end responsibilities, depending how I believe, they are presenting themselves on the forum
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

HELP! PLEASE READ THIS!

Similar Messages

Maybe you are looking for