Help, please: Sequence audio won't play - 'pinked' out.

Hi FCPeers,
I'm (hopefully) winding up a two week system reformation - storage backup, initialization, reformatting, partioning, installation - well, the whole 9 yards in order to run my creaky but workable FCP 3.0.4 on OS X 10.2.8 the way it was meant to run (NOT on 10.4x!).
Anyway, I'm sure my question must be a no brainer for the more experienced, but in my current Project I have two Sequences, a Title Sequence and the Sequence of the film, itself. I did this to keep rendering times down on my low end machine figuring that I'd "splice" the two Seqs together (believe me, I'm looking at a Mac Pro solution in the hopefully not too distant future).
Now, I cut both sequences so that the Title audio tracks segues seamlessly into the tracks of the second Sequence, such that the overlap can be lifted or overwritten (only two channels among the four tracks actually cojoin). To do this I found a moment of silence with no video between the two Sequences, but in order to test, today, I tried copying both the video and audio of the "Title" Sequence to the "Movie" Sequence (and vice versa!) Everything plays as it should EXCEPT for 3 adjacent segments of one of the (four) audio tracks. Can't hear 'em. They show up pink in the Timeline and are just not heard. I went back and rendered the pink segments individually - still no sound from those portions of the track. I fiddled with the Channel designators, switching this and neighboring tracks between Channel 1 and 2 to no avail. I'm sure I'm doing something wrong. Could it be that because the tracks in the two Sequences have the same name that they default to toggle one of the tracks off at a lower level? The developers anticipated this because of the pink tint to the track. If this is explained elsewhere, I apologize for being lazy and not searching harder to get a clue.
Thanks in advance for any HELP!
All the best,
David
FP iMac 800, 17" Al PowerBook Mac OS X (10.4.4) OS X 10.4.7, 10.2.8; FCP 3.0.4! ;º}

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

Similar Messages

Need Audio help! Interview audio won't play out to tape.

My voiceover and Soundtrack audio sounds great, but my interviews sound terrible when I play out to DV to record to the camera.
I checked the item properties and noticed that all the good audio is at 44.1khz while the "bad" audio is at 48khz.
What can I do to make this play out?
Thanks!

Hi(Bonjour)!
What is the sequence's audio format? It should be 48 kHz as it's standard in video editing software.
Did you capture audio interview from camcorder? What is the audio sampling format in audio menu? (32 or 48 kHz, 12 or 16 bit?)
The audio mixdown render may resolve this problem but it's always a good thing to resample each audio file to match the sequence sample rate:48 kHz.
Michel Boissonneault

HELP PLEASE: DVD Movie Won't Play on Computer nor Transfer

Hi! I burned a VHS taped program to a DVD on a Sony DVD burner and I made sure that I finalized the DVD. When I checked it while it was still in the player it did play on the TV very well but the DVD will not play on the computer nor will any of the programs recognize it.
When I put the DVD in the Mac Mini a folder appears on the desk top that says: SONATA_VOLUME and has a red circle with a white line in the center of it.
When I click on the folder and it opens there is nothing showing inside of it. QT Pro, iDVD, iMovie nor any other app will play it nor Handbrake, MacTheRipper will recognize it.
I'd like to know what I did wrong and how to fix it so that I can transfer & convert this file for the iPod.
I got the disks from compusa on sale so they are no name brands. Is the problem the DVD burner or the disks?

First, thank you for taking the time to respond.
This is the recorder I have: Sony DVD Recorder & VHS Combo PlayerRDR-VX515:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SYDisplayProductInformation-Start?CategoryName=hav_DVDDVDRecorders&ProductSKU=RDRVX515&TabName=feature&var2=
The specs stated that it does record MPEG video.
The Mac mini is a super drive w/ + & - capability. I guess I'll have to buy another recorder to get this to work.

Help Please. Audio does not play back when moving by frame in timeline

Normally when I advance through the timeline frame by frame using the left and right arrow keys I can hear the audio. But it just stopped working. Any ideas?
Any suggestions would be most appreciated.
Gene

Thank you! Onward with my latenight editing!
Gene

Help!! AVI audio won't play - Premiere Pro v.7

Hi!
I captured footage from my DV camera into Windows Movie Maker in the form of a DV-avi. (I use WMM because Premiere crashes when I try to capture DV video). And when I import the AVI into Premiere Pro v.7 the audio won't play in the project window. However, when I scrub the slider back and forth the audio does play (kind of).
I have never had this problem before. I've captured video many times and this never happened.
I tried re-capturing it 6 times, but still the audio doesn't play (except when I scrub).
Is there an option I clicked accidentally?
Any help would be really great.
Thanks a lot!
-R

John T Smith wrote:
I think WMM creates type 1 files and Premiere needs type 2
You might Google for a converter
You might also use the free http://www.headbands.com/gspot to find out the file details, and report back so someone may be able to help
I installed that program. Very helpful and interesting. Thanks for the link.
I assumed, like you, that I had simply captured the AVI files as Type 1. But I guess they are Type 2, after all.
I don't know if this helps, but the AVIs play just fine in Quicktime, Windows Media Player, WMM and Winamp.
Thanks again for your help.
Here is the information gspot provided:
FILE_NAME                      tape6_raw0001.avi
FILE_NAME_WITH_PATH            O:\EDITING\In the Woods\Tape 6\clips\tape6_raw0001.avi
FILE_SIZE                      90,872,392
CONT_AUDIO_STREAM_COUNT        1
CONT_BASETYPE                  AVI(.AVI)
CONT_BYTES_MISSING             0
CONT_INTERLEAVE_ALIGN
CONT_INTERLEAVE_PRELOAD
CONT_INTERLEAVE_TIME
CONT_SUBTYPE                   OpenDML (AVI v2.0),
CONT_TOTAL_BITRATE             0
VIDEO_ASPECT_CONVERT_AVI1      Resize to 656 x 480 (Use +/- for other target sizes)
VIDEO_ASPECT_CONVERT_AVI2      Crop off any non-picture areas, if req'd
VIDEO_ASPECT_CONVERT_CVD1      Resize to 360 x 480 ( w:[1/2] h:[1/1] )
VIDEO_ASPECT_CONVERT_CVD2      Trim 4 from each side for 352 x 480
VIDEO_ASPECT_CONVERT_DVD1      No resize req'd
VIDEO_ASPECT_CONVERT_DVD2      No cropping req'd
VIDEO_ASPECT_CONVERT_SVCD1     Resize to 480 x 480 ( w:[2/3] h:[1/1] )
VIDEO_ASPECT_CONVERT_SVCD2     No cropping req'd
VIDEO_ASPECT_CONVERT_VCD1      Resize to 360 x 240 ( w:[1/2] h:[1/2] )
VIDEO_ASPECT_CONVERT_VCD2      Trim 4 from each side for 352 x 240
VIDEO_ASPECT_SOURCE_MATCH      DVD
VIDEO_ASPECT_TYPE_NTSC         NTSC
VIDEO_ASPECT_TYPE_PAL
VIDEO_BITRATE                  28771
VIDEO_CODEC_NAME               DVC/DV Video
VIDEO_CODEC_STATUS             Codec(s) are Installed
VIDEO_CODEC_TYPE               dvsd
VIDEO_DAR                      1.333
VIDEO_DURATION                 0:24.291
VIDEO_FIELDS_PER_SEC           59.940
VIDEO_FRAME_COUNT              728
VIDEO_FRAMES_PER_SEC           29.970
VIDEO_H264
VIDEO_MPEG2
VIDEO_MPEG2_3X2
VIDEO_MPEG2_BFF
VIDEO_MPEG2_I_L
VIDEO_MPEG2_PPF
VIDEO_MPEG2_PROG
VIDEO_MPEG2_TFF
VIDEO_MPEG4
VIDEO_MPEG4_BVOP
VIDEO_MPEG4_GMC
VIDEO_MPEG4_NVOP
VIDEO_MPEG4_QPEL
VIDEO_PAR                      0.889
VIDEO_PICS_PER_SEC             29.970
VIDEO_QF                       2.778
VIDEO_SAR                      1.500
VIDEO_SIZE_X                   720
VIDEO_SIZE_Y                   480
AUDIO_BITRATE                  1024
AUDIO_BITRATE_TYPE
AUDIO_CHANNEL_COUNT            2
AUDIO_CODEC                    PCM Audio
AUDIO_CODEC_STATUS             No Codec Required
AUDIO_MPEG_STREAM_ID
AUDIO_MPEG_SUBSTREAM_ID
AUDIO_SAMPLE_RATE              32000

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Hype widget; audio won't play when previewing on iPad

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Hi,
I've come across a strange 'bug' in iBooks Author. Hope someone can help.
I made a widget using Tumult's Hype software. It has multiple scenes, audio and animated text. When previewing the widget in Hype everything works fine. But here comes the strange part;
When I insert the hype widget in an empty iBooksAuthor book the animation and audio works fine when previewing on my iPad2. But when i insert the widget in my iBook, wich has already ten pages filled with text, reviews, etc., the animation work, but the audio won't play when previewing on my iPad.
People from Tumult helped me, but were not able to fix this.
So in an empty book the widget from Hype works fine, but when inserting the widget in a book that has some pages the audio won't play! How can i fix this?
Thanks for the support!

Help! Video's won't play. It says playing on AirPlay on 'null'. What should I do?

Help! Video's won't play. It says playing on AirPlay on 'null'. What should I do?

Hi I upgraded my iPhone on iOS 6.1 now it keeps on turning off and on. What would I do?

My iPod Touch 5th Generation won't play music out loud. Why and what can i do to 'fix' it?

My iPod Touch 5th Generation won't play music out loud. Why and what can i do to 'fix' it?

If you mean the headphones work but the speaker does not:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Please HELP! iPod Nano won't play songs

I just got my iPod nano yesterday and absolutely loved it. I took some of my friendssongs from his PC. Then I tryed using ipod agent to put them into itunes. It said that there was an error. Now when I chose a song the song will come up, it won't play, but instead go to the next song and same thing happens. Now itunes won't even recongiz or pop up when it is plugged in

The iPod is designed to sync to one computer as it copies the music to a special file for the iPod OS and software to play.
You can enable "disk mode" and use that to transfer any file back and forth, but the iPod won't play music files stored in the "disk mode" portion you set in iTunes Preferences with the ipod plugged in.
Basically the software you used to transfer the music out of the "special file" back into iTunes is not authorized, it's a "hack". So Apple routinely disables the hacks because of agreements to protect the music from piracy.
Another thing is the music you got from your friend may indeed by ACC/"Fairplay" copy protected music bought from the iTunes Music Store, unless your computer is one of the five authorized, it won't play.
Also because you hooked your iPod to your friends PC, the "ownership" might have changed and Apple may have employed something that your iPod is no longer recognized as yours.
What you probably have to do is use the iPod software to "reset" your iPod, clear out everything in the process and just hook it to your computer.
If you want to transfer uncopy protected, non-copy righted "free" music to your computer from another computer, enable the iPod's "disk mode" and set a size to balance between the music in your "special file" and the needs of what you intend to transfer.
Once you get home, transfer the music files into your iTunes, then you can copy them to the "special file" so the iPod can play them.
It's a bit complicated, but's it's designed to prevent mass theft of music (so the artists will provide their music online) and keep the benefit of syncing/playlists in line.

Audio won't play on top of video

I have shot a simple interview style video and edited it in FCP. I created a simple acoustic guitar loop to play in the background using Garage Band and made it into an .aif format.
I've dropped the file into FCP, but for some reason the audio won't come out for the loop. I still have audio from the video, but the loop doesn't come through. When I watch the audio meter as the video is playing, I can see it responding during silence as if the loop actually is actually playing, but it's not coming out. (I've even listened with headphones to ensure this.) I have turned off the audio from the movie, played the video, and I still SEE the audio for the loop playing, but it isn't coming out of the speakers. I've tried renduring, and still the loop doesn't come through. I have ensured that my Audio rate from my file matches the audio rate from my sequence presets. I've tried changing my audio outputs from all stereo to all mono, to 2 stereo and 2 mono, and I still can't get the audio to for my loop.
Could someone help me out with this?

I know, it's shocking that no one has responded to this.
Anyway, No, I haven't created a new project, but it wouldn't matter because it would have the same settings as my original project. It's interesting to note that only the top two audio tracks will come through, and it's like anything below that will just simply not come out, even though the audio meter still registers the sound from the loop. (I've muted the sound from my video to ensure that it wasn't just background or room noise I was picking up.)
The track I created doesn't show a need to render, but you are correct in that I already checked this. I did, however, take another look at all of my audio clips and the sound of my video is apparently in a mono format as well as my sound loop. (Not sure HOW those became mono, but nothing a simple remixing won't fix.) Anyway, seeing that all of my sound files were mono, I went into my settings and changed all of my audio outputs to mono. So I even have 8 -That's right, count 'em... 8 - mono channels for sound and the loop STILL wouldn't come through.
I swear, sometimes this program makes me want to cus.

Audio won't play when I'm skimming through clips on iMovie

The audio of the clips I have on iMovie won't play when I'm skimming through them, but will play when I play the clips. I made sure the volume of every clip and on the computer works (it does) but this is getting really annoying. Can anyone please help me out?

To Reboot your computer, select /Shutdown... from the top menu. Wait a few seconds, then turn your computer back on with the on switch.
You don't really have to know what a swapfile is, but here is a simplified explanation.
Your computer comes with a processor (Intel 2.8 ghz in my case), memory (2GB in my case), and a hard drive (500GB in my case).
The processor is very fast. The memory holds the instructions and the data that the processor will work on next. Long term storage is kept on the hard drive, which is slower. Think of the following metaphor: You are sitting at a desk. You are the processor. Your desktop is the memory, which contains the stuff you are ready to act on. Stuff you have already acted on, or will not need until later, is in the drawers or in a file cabinet (the hard drive).
Let's say you are working in several applications at once: iMovie, Microsoft Word, iTunes, Calendar, and Safari. Each of these programs needs some of your memory to function, and to get stuff to the processor for action. If you add all the memory requirements up, it may be more than the 2GB of "real" memory that you have. Fortunately, OSX lets you use virtual memory, so your programs can pretend they have as much memory as they need. Your programs can address memory as if they had a whole bunch of memory all to themselves.
This is done through swapfiles. When there is more virtual memory than real memory, the programs and data that have been used least recently are swapped out to hard disk in a swapfile. This file is not the permanent storage. It is the temporary parking place for memory when the real memory is being used by another application.
So lets say you want to use iMovie. It might take up 1GB out of your 2GB. There is not room, so OSX looks around and sees that you haven't used iTunes in a while. So the itunes instructions and music about to be played is swapped our to a swapfile on the harddisk.
If you decide you want to listen to iTUnes, you will have to wait a few seconds as iTunes is swapped back in to real memory, and something else is swapped out.
This is a simple case. It can get more complicated.
But, as you run more and more programs, the real memory gets used up and there might be seven or eight swapfiles out on disk. At some point, OSX gets sluggish and has a hard time dealing with this. For example, if two large swapfiles needed to be paged in at the same time, there might not be room. Also, the real memory can get fragmented, and have open space, but the open space is not big enough to swap something in.
I run a free utility called Memory Stick that shows me how many swapfiles I currently have. If I am working on something critical in iMovie, and I notice that I have a lot of swapfiles, I will usually just reboot and start over with 1 swapfile. In doing this, I hope to avoid the spinning beach ball that happens when OSX can't handle it any more.
You don't really need to know this. OSX handles it for you. But understanding how it works can help you self-diagnose some problems from time to time.

Help please: iTunes will no longer play downloaded songs

ITunes will no longer play songs that I've downloaded from the iTunes Music Store. It used to play them, but now it won't play them at all. It will play only songs in the library from my CDs. I only have these downloaded songs on one computer, the same as I've always had. I can see the files in the folder My Music/[artist]/[album]. I have QuickTime 6.5.2 and iTunes 4. I don't know of anything that's changed on my computer since the songs were working.
1) Is the problem that it's an old version of iTunes?
2) If I switch to a newer version, will I lose all my downloaded songs?
3) If the version of iTunes isn't the problem, any ideas about what could be wrong?
Please help! I've only had iTunes for a few months and have barely been able to use it. (I can't understand why it would become so outdated so quickly.) Thanks in advance!

Back up your purchased music before you upgrade, I've read at least 5 cases where purchased music has just gone.....missing.
That is not supposed to happen, didn't happen to me or thousnds of other iTunes users, but you don't want to be the 6th person, do you?
There are two things to try before you upgrade:
Barbara Hall, "Unknown Error (-208)" #1, 07:42pm Oct 19, 2005 CDT
http://docs.info.apple.com/article.html?artnum=302478

Audio won't play after audio render

I have an MP3 on audio track 1 in Premiere/CS4, placed underneath video clips which I've unlinked from the audio and deleted/cleared those unlinked audio files. The MP3 file plays fine until I render the timeline and then it stops playing. If I 'double click' the file (placing it back in the source window) it plays fine there, but won't play in the timeline. I've included the file properties below. Does anyone have any idea why this is happening and what I can do to fix the problem?
Type: MP3 Audio
File Size: 4.2 MB
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:03:03:32868
Average Data Rate: 23 KB / second

I could do a MP3 to WAV conversion, but that defeats the
purpose of storing my (growing) music library in MP3 for space conservation.
I understand the space problem. Only do this for files that you are using as Assets, Imported into PrPro, if they give you a problem.
Seems I'm finding I have to do a lot of 'work arounds' with CS4.
Well, it does seem that you are not alone on this one. However, my problem came with PrPro 2.0. In my case, it only happened once, but did affect about a dozen Audio files in several Sequences. Did not realize the magnitude of my issue, and only observed it after a busy day of trying to Keyframe some Effects and doing multiple Renders to check things out. One moment all Audio in that section was playing well - next moment (after one more Render) dead. Others, who replied to my thread indicated that it had happened to them too, in similar circumstances. Trouble was, none of us could duplicate it and some had this happen on their first Render, while I'd probably done a dozen that morning. Have never had it happen again, and finished that Project with hundreds more Renders, just like I'd done, with not one problem. I certainly can not call it a Bug, as there was no way for anyone to reproduce it. Still, whatever allows it to happen, under the right (or wrong) circumstances seems to be around two generations later. Hey, phases of the Moon?
Good luck, and let's hope that neither of us sees this behavior again,
Hunt

Audio won't play after replacing the video clip with after effects composition?

I am using CS5. Still new to this stuff so let me know if you need extra info. None of the faq guides have been helpful.

The audio is still in the project, but won't play in the canvas... this was solved by Richardttt... see this thread: http://discussions.apple.com/thread.jspa?threadID=1491870&tstart=0
I tried this and it works but still don't know why it happened: Under Object Menu, select Unsolo>Video Only.

Help, please: Sequence audio won't play - 'pinked' out.

Similar Messages

Maybe you are looking for