Help please , slower speed than

Why is my Mu-slim sounds quite a bit slower than the actual CD?

It sounds like one of the settings (Peebee mentioned) is probably too low, and is not supported by the player. Try re-ripping them at a higher quality/setting.
Cat

Similar Messages

Upgraded to ADSL2 now get slower speeds than befor...

Hello
Well last Tuesday my line was upgraded to the 20mb ADSL2 and I was looking forward to some increase in bandwidth (even though before the upgrade my line was pumping 7mb most of the time which I was happy with)
Now for some reason I am getting slower speeds than before I upgraded. Something tells me I should not have bothered with the amount of effort it took to get the upgrade.
I cant understand why my DL is saying 3000+ and before upgrade it was reading 7500+
I have not reset my hub manually all disconnections have been done automatic.
Here are my router stats and I have been reading a few posts and I am hoping someone can shine some light on this for me:
BT Home Hub - DSL Connection
DSL Connection
Link Information
Uptime:
2 days, 0:36:48
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
687 / 3,347
Data Transferred (Sent/Received) [MB/GB]:
177.59 / 3.69
Output Power (Up/Down) [dBm]:
9.5 / 0.0
Line Attenuation (Up/Down) [dB]:
14.5 / 28.0
SN Margin (Up/Down) [dB]:
12.5 / 19.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
2 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
17 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 97
HEC Errors (Up/Down):
0 / 96
Line Profile:
Fast
Software version: 6.2.6.H
Solved!
Go to Solution.

That's good to hear
Enjoy the speed
-+-No longer a forum member-+-

PLEASE HELP! SLOW SPEED FOR 5 WEEKS!

Hey all, i've come here as a last resort as im sick of my slow infinity speed and sick to death with bt customer service which does not exist!
Since before christmas my bt infinity package 1 38down/10up has been playing up after 12 midnight! usually after this time my speed would go down from 37download to around 0.5/0.1 soo low that i can't load a web page. Ive tried for weeks contacting bt which takes me to the offshore call centre where iv'e been fobbed of that an engineer is investigating an issue at the exchange or that the issue will be fixed in either 24, 36 or 48 hours numerous times to which it has not.
This last week my internet speed has dropped during the day time where before in the day it was a solid 37down and 10 up it now goes down to 10 meg and now its gone down to 0.1 meg. It went down to 0.1 meg today at around 6.30pm.
These are a list of stats below: Im at my wits end and i just want my broadband fixed! I beg Please someone help me!
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:07:34
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Can someone please help me too! before christmas i was getting low speeds after 12 midnight, going down to 0.1 meg for over 5 weeks now ive had this problem and now in the day where i used to get a solid 37meg down im now at different times, started today at 6.30pm im going down to 0.1 meg.
BT Customer service is disgusting beyone belief, been fobbed of after 12 phone calls. Please someone help.
stats avalibe here:
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:45:18
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Help Please: Slow To Restart After Update

My family member got his Macbook in August 2006 but rarely if ever did any updates. I ran Software Update today and there were a lot of things listed so I decided to do it in steps. First, there were a couple of firmware updates which downloaded then I was returned to the Software Update window. I then selected the 10.4.11 update. After installing that, it said I should restart, which I agreed to.
Now, however, it has come back with the apple in the middle of the screen and the little spinning thing below it and it has been doing that for at least 30 minutes so far. I think I can hear the disk spinning, unless that's just a fan.
The machine is slow as it has the small amount of memory that it came with, but is this normal? Should I just let it keep going or should I kill it and try to restart?
Thanks.

Well, I think I got it to work based on input from another forum. I shut the MacBook down and rebooted. Then I did the firmware updates by going directly to the Utilities folder and in turn double clicking on each update and following the directions there.

Help by Forum Mods solved slow speed

Thank you to the replies in the super slow thread where I posted. A big thank you to Stephanie a Forum Moderator who guided me back to a better service and speed than before the issue started.
If you have lost tithe good broadband speed you once enjoyed I recommend you follow the guidance of the Forum Moderators. Like me your frustration will hinder any progress and patience is needed, two weeks in my case.
I had 6 Mbps in November, then down to .25, I blamed BT for capping throttling me, and raged at those on the forum that insisted Bt don't do this ( deliberately ) vented my anger at BT vowing to move to Sky (which I will not).
here is what I know now....
I caused my own problem, I switched the power of the hub when away for a week, the exchange assumed a power cut which would do the same and automatically registers a fault on my broadband cuts the speed to 0.25mbps ( No human BT dictator flicks any switches or choses me maliciously ). The automated procedure of the computers at the exchange is now to monitor my BB connection and if there are no more outages or faults gradually bring the speed back up. For some this will happen over 3 to 5 days. I never had more than 3 hours without dropping tithe connection so that was not going to happen.
I had two unforeseen further problems, a fault on my voice line, BT eng summoned by the Forum Mod, and faulty connection sorted. Still the BB connection was dropping inside a 12houri window. I noticed that there were now as many a 5 Bt hubs and 3 others being offered by my wireless connection. Stephanie then guided me on changing the wireless frequency of my hub, to avoiinterference from my neighbours hubs. Problem solved.
I now have 10.5 Mbps and a very stable connection, I was able to move the hub to the end of an extension ( now I understand the Adsl filter) and use an Ethernet cable to connect to the Sky box for on demand. droop romp or lag on Netflix from the Xbox.
A long post but I hope it will help the frustrated understand the papered problem can be fix and the team here can help, but patience is required.
Seasons Greetings to all the forum and especially the Moderators and Team.
ps. If you are going to correct my description of what happens when the exchange drops the speed don't be to techy, not all BT customerthrill understand.

It is a regular problem i am afraid and will only get worse the more wireless routers that come on line don't worry about the predictive text it winds me up as well
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Please help very slow internet

HI guys,
i have very slow wireless internet... Yesterday i have update to 8 MB. I have one PC where router is connected to. I did speedtest.net and it shows 6.4 mb which is really cool.I have MBP in my room about 15 meters away and 2 doors in way(don't know if that matters) I am connected by wireless. I have download AirGrab wifi radar and it shows only 32% signal and when i do speedtest it shows only 226kbps Then i sit next to router so the radar shows 100% signal and the speed was 1.4 MB a little bit better but still not enough. What should i do or buy to get as fast connection as possible. I feel horrible the PC is 8 years old with 6mb speed and my mac pro.. well u know. Thanks a lot Tomas

I have had problems with this for the entire time (18 months) I've had my Mac Book Pro. My desktop is noticeably faster with wireless than my MBP. Transferring music through iTunes is also slow. It will break up. Sometimes restarting my mbp will help with the speed. I'd love to find a solution.

Blast speed is currently 2 Mbps/9 Mbps on the Comcast Speed Test. Help please!

I've had the Blast service for quite some time, and have noticed painfully slow internet browsing for the last couple of months. I mean...pull-my-hair-out-slow. I just did a Comcast speed test and the results were 2.31 Mpbs and 9.01 Mpbs. Um....that would explain things. But not really... as I'd love to see the speeds I'm supposed to have. Even double digits would be nice! I'm trying to run ShaperProbe but I get the error "Servers are busy. Try again later." I've tried a few times. I'll post the results if I can get the scan to work. Power level is 45-46 dBmV and SNR 35-37 Modem: ARRIS Motorola SurfBoard SB6141 DOCSIS 3.0Logs of June 2015 (the most recent, and the logs before that are January): Jun 22 2015 07:07:243-CriticalT05.0SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 18 2015 08:04:503-CriticalR02.0No Ranging Response received - T3 time-out;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 18 2015 07:08:273-CriticalT05.0SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 17 2015 23:08:553-CriticalR02.0No Ranging Response received - T3 time-out;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0;Jun 16 2015 02:43:065-WarningZ00.0MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=b8:16:19:fa:b8:0c;CMTS-MAC=00:1d:70:af:fd:a0;CM-QOS=1.1;CM-VER=3.0; I would sure appreciate any ideas. I have not contacted tech support yet, although that may be faster?? We'll see. Thanks in advance for any help!

ShaperProbe has not been usable for some time, unfortunately. Check to see if Comcast is reporting an outage for your area by logging in to https://customer.xfinity.com/Secure/MyServices/ or by checking the voice response system at 1-800-Comcast.
If no outage is reported, see Connection Troubleshooting Tips. If you want to troubleshoot this yourself and still need help, please provide Information Requested for Connection-Related Posts.
If you are using Wifi it's best to switch to an Ethernet connection if possible while measuring speed and checking the reliability of your connection to Comcast.
If you'd rather have them do the troubleshooting call them at the phone number on your bill or 1-800-Comcast and have them send a tech out to identify the cause and correct it.
If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit unless you have their Service Protection Plan (http://www.xfinity.com/spp/, about $5/mo). If the trouble is due to a faulty Comcast modem, eMTA, gateway device, or anything outside your home, you shouldn't be charged.

BB gone very slow ...help please

I live in a rural area, am about 3 miles from the exchange, so I'm used to not having a fast service, however my speed often runs around 1.22Mb/s download and 0.38Mb/s upload. But yesterday it dropped to very slow. I just decided to leave it for 24 hours to see if it sorted itself out. Well it didn't and I'm here now looking for some help please!
I have checked my local exchange, no problems reported.
I have worked through the BT BB Speed Wizard thing.
I did the Speedtester and these are the results
FAQ
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
107 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 107 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :1600 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.
I've changed all the filters and I reset the Home Hub a couple of hours ago. Nothing...
THis is the info from my Home Hub:
ADSL line status
Connection Information
Line state
Connected
Connection time
0 days, 03:49:10
Downstream
1,600 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
7.3 dB / 19.0 dB
Line attenuation (Down/Up)
62.9 dB / 31.5 dB
Output power (Down/Up)
2.5 dBm / 1.5 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
245 / 7
CRC Errors (Down/Up)
324 / 11
HEC Errors (Down/Up)
4266 / 39
Error Seconds (Local/Remote)
23 / 7

Noticed it was back to normal speed again just now, so I did another speed test.
Results
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
1130 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1130 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1600 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1250 Kbps
Obviously I'm pleased that it's back to normal but confused as to what caused the problem - 24 hours of extremely slow connection and then it's normal again. ANy ideas?

My iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?

my iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?
i try to downgrade to 6.1.3 but its not possible

http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
Downgrading isn't supported by Apple, sorry.

After Mavericks, applications tend to become slow, painfully slow. Particularly iMovie; all other applications, Mail, Browser (Chrome) and others too are either running slow or 'not responding'. Help, please

After upgrading to Mavericks, from Mountai Lion, all applications are slowing down. iMovie particularly is painfully slow. When iM is running, any other application that is opened up also runs slow or does not respond altogether. It was fine before Mavericks, can somebody help, please.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

Problem with RAM and slowing of computer when using CS5 can anyone help please?

Hello I am having big problems at the moment with a slow computer when I am using Photoshop CS5 I am informed that I am low on memory. I do not store any photographs on my computer they are all on an external hard drive, the only image on the computer are the ones I am working with. I have been in touch with Norton who think it is an Adobe issue can anyone help please, looking forward to hearing from you and to a swift fix of the problem
Best wishes
Sheila

How much memory do you have installed, and what operating system are you running?
Mark

My Iphone 5, was backed up and restored. Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option. Can anyone help please?

My IPhone 5, was backed up and restored. Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option. I have reinstalled ITunes but still this hasn't worked. Can anyone help please?

This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.

My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?

My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?
Problem description:
slow computer
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 2:57:16 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 384 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (25.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.smarttech.iokit.SMARTBoard (11) Support
[not loaded] com.tectona.driver.PL2303 (1.3.0) Support
[loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.smarttech.boardservice.plist Support
[running] com.smarttech.floatingtools.plist Support
[running] com.smarttech.ink.plist Support
[running] com.smarttech.SBWDKService.plist Support
[running] com.smarttech.smartnotification.plist Support
[running] com.smarttech.systemtrayicon.plist Support
[running] com.webroot.WRMacApp.plist Support
[running] com.webroot.WRMacBackNSync.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.regularrateandrhythm.rowmotehelperaide.plist Support
[running] com.webroot.security.mac.plist Support
[running] com.webroot.webfilter.mac.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service UNKNOWN (missing value)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify Application (/Applications/Spotify.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Rowmote Helper Application (/Applications/Rowmote Helper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
npwebroot: Version: 2.0.15 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
SMART Board Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      3% WindowServer
      2% iPhoto
      2% mds
      2% mdworker
      1% Google Chrome
Top Processes by Memory: ℹ️
382 MB Mail
275 MB WebProcess
107 MB Google Chrome
103 MB WindowServer
99 MB Google Chrome Helper
Virtual Memory Information: ℹ️
270 MB Free RAM
1.50 GB Active RAM
1.30 GB Inactive RAM
1.22 GB Wired RAM
20.97 GB Page-ins
8.64 GB Page-outs

Hi Linc
I hope this is what you were after. Looking forward to hearing your feedback.
Thanks, Susanna.
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
"query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
"query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m

I have uninstalled everything on my laptop, removed all my files to my external device and my laptop is still incredibly slow when opening any of the adobe applications, can anyone help please?

I have downloaded the adobe student suite and whenever I open any of the adobe applications my laptop is incredibly slow, I cannot use any other application at the same time and often have to force quit. I have taken all my files off my laptop and added to my external hardrive. Can anyone help please?

What about other non-Adobe programs on the machine - do they also run slowly?
What are your system specifications? How do they match up to the system requirements for the software?

Help please , slower speed than

Similar Messages

Maybe you are looking for