Help, please someone explain my bill for me?

So I started my phone plan on September 1st and it's my first plan so I wasn't sure how things work.
I'm getting charged 116 and it's due on the 28th.
I spoke to someone on the phone about it and they said that they prorated my bill even from Sept. 1st to the 3rd which is when my month ends and it's on the bill but on the bill it also shows that I'm being charged from Sept. 4th to Oct. 3rd.
My question is, am I normally supposed to pay it advance?

You must have gone to a Verizon store that was a Sales Rep store not the Real Verizon stores.. Know that you Never go in those stores they will get you Everytime in one way or the other. All you have to do is go to this page or call the 611 give you phone number and pin wait it will tell you what to do next and do it then wait it only takes a few min for them to answer I usually put it on speaker until someone answers and go back to what I am doing.  It will fiinally be ok the following month depending on what you got. My Phone is only activated to use unlimited for 69.99 plus tax no text and if I want text its a total of around 87 dollars a month I do NOT like Text its not personal so I never use it. So I just wanted unlimited. Next months bill will even out put it on paperless statements it will take the bill out all by itself and you never have to worry. Your first bill is always the worst also after that they credit all they can for you to fix it back to the amounts that you were to pay in the first place. My bill was the same the first month after that I was ok. Good luck remember if you need help Verizon is always there for you not against you not at all.. They are only Human as we all make mistakes so know that and continue on it will all work out for your next bill. I would call the 611 number and find out what the bill is all about.. If this is what your paying a month for your phone ext..

Similar Messages

  • Can someone explain the code for having the Accordion panels closed?

    I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
    This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
    <script type="test/javascript">
    var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
    </script>
    Angela

    GPDMTR25 wrote:
    I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
    This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
    <script type="test/javascript">
    var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
    </script>
    Angela
    Hi Angela,
    You are right, the only way it will work is by setting the fixed height to false. As for the for the default panel option, -1 is not a panel and if you had 3 panels we could have used the number 3 (panel1 = 0) or 99 or whatever as long as there is no panel with that number. If we had used the number 1 for instance, then the 2nd panel would be opened by default.
    Hope this helps.
    Ben

  • Help please with 2006 Macbook 13inch, for tv hook up.

    Help please with 2006 Macbook 13inch, to hook up to tv for streaming. The display works through VGA but the audio isn't working. Got a plug that goes into headphone jack on computer and connects into the audio jack on the back of tv but no sound. I'm not quite sure what the issue is, whether its the wrong plug, the tv, or the computer. Best Buy says this is the right plug and it seems that it would be, but who knows. If anyone has any experience in this, I would appreciate the help!

    Make sure those audio plugs are matched with the VGA plug. With your MacBook running something with audio switch between your sources on the TV Component, Composite and such. See if the sound is coming from another source. If so then you've got your audio plugs in the wrong jacks.
    Also could you post the make and model number of your TV.

  • HT2534 What to do? Help please. Free app asking for billing details. And which one to use apple id or iCloud id?

    When i want to install a free app using my apple id [email protected] - it asks me to enter billing details...why is that? :s
    What to do?
    And when i try to install it using my icloud id [email protected] , it does give me the option of 'none' in payment method but when i select it, it asks me to first fill in the details only then it would move to the next step.
    And i wanted to ask....is it better to use my id the one with [email protected] or [email protected] ?
    PLEASE HELP!!!!

    For a standard account, a valid payment method is required even for free apps.
    You can create a new account w/o a CC that is only good for apps by following these instructions
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

  • MODS....Help please - I'm being charged for a visi...

    Could one of the mods help me please....
    In July I reported an intermittent noisy line which was causing problems with my broadband disconnecting.
    (discussed this thread: http://community.bt.com/t5/BB-in-Home/Gremlins/m-p/55529#M34771)
    An engineer called and couldn't find the fault.
    I persevered with the fault until October when the noise became almost continuous. Another engineer called and this time, fortunately, the noise was occurring during his visit. He diagnosed a problem in the junction box at the end of the road, put me on a different pair and the problem went away - no more noise, no more broadband disconnections and a reliable connection.
    Now, on my latest bill, I have been charged £127.00 for the first engineer's visit, the one in July.
    I spoke to BT accounts and they insist that because I reported the first fault as 'a noisy line' and the second fault as 'a broadband fault' the two are not related, and I have to pay for the first visit as 'no fault was found'.
    I tried to explain that the fault all along has been the noisy line and it was only when this was fixed that the broadband problem was resolved but they are adamant.
    Please, could one of the mods respond..... I can't afford this extra charge.
    Solved!
    Go to Solution.

    Hi selectortone,
    I'll be happy to have a look into this and see what the story is.
    Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
    Just send to the email address in my profile and mark FAO Craig please.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HELP please ! No phone service for a month or more....

    I've been a Verizon custmer for as long as I can remember (in my late 50's). I've been living in this smae house now for 10 years - no changes to wiring etc. I have land line and DSL service - never an issue. I woke up one morning back in June and no dial tone. I unplugged each phone one at a time etc., did not solve the problem. I took a phone out to the service box and plugged it into the jack outside and it works just fine. I happened to have a long length of  phone wire and so I ran it out the window  to the jack outside. Thankfully both DSL and phone now work. One odd thing is that my phone will ring now twice per day - 2 rings and at exactly at the same time am & pm. Also, when ever I end a phone call (hang up) the phone will ring once. These behaviors are consistent. The wiring inside the house can't be more than 10 years old as this how old the house is. I have changed nothing except putting the inline filters on each phone when I got DSL 5/6 years ago. I live alone and have not had any service calls by any other utility company so its not that a service person accidently caused a problem with the wiring. I can not afford to call a service tech out to the house only to find out that its somehow my responsibilty as I no longer work and have serious heath issues now and medical bills through the roof. Not whining, just explaining. I know, "you can afford DSL though ?". Yes, the 'net its my only contact with the outside world. I live alone and don't know any of my neighbors. Again, not whining, just 'splaining ! Anyhow, I thought maybe a lightning strike but then the service jack would be fried too so that can't be it.I have only a crawl space access to the house wiring and crawling around down there trying to test the wiring will be painful and difficult to say the least. I thought that maybe I could un hook and splice say the green wire to the red wire on the outside jack and then put the probes from a continuity tester across the green/red termianls at each inside jack so as to test for a break in the line might work ? Of course I'd have to repeat for each color which means a lot of running outside and back in again but I guess I could do it if need be. I only have 3 rooms, each with a modular wall jack and a phone in each + the DSL wire/jack. Other than this I'm all out of ideas and not even sure if the splicing idea even makes sense ? If anyone could help with an answer/advice, I'd be extremely grateful as the cold weather will be coming soon and having a wire go out through an opened window - even if only crack, will not cut it when it gets -30 here !! Thanx much....

    Thank you for responding. Yes, I do have a long length of phone wire but its part of a phone company reel 'thingamajig' and I'd have to cut the jack off the end thereby ruining the piece. If I did cut the end off I'd then have no way to use my phone/DSL if I couldn't do the needed repairs immediately. This is why I was asking about the 'splice' procedure. I think my 'logic' is correct - if you unscrew the green and red wires out at the box and splice them together they'd form a continuous loop from the outside box to the green/red wires at the wall jack. Of course one can splice any 2 of the colored wires to make the 'loop' and it can be spliced at either end - inside at wall jack or outside at box....that is 'I think so'.... Then I put the probes of my continuity detector on the corresponding red/green wire ends at the opposite end and see if I have a continuous, unbroken 'loop' (?)This wouldn't answer whether there was a corrosion issue or not but it should show if there's a break in one of the wires. The house is comparatively 'new' as houses go and I can't help but think there's something else going on here - especially since the phone rings twice per day at the exact hour/minute/second every day and also rings once whenever I hang up the phone. I was hoping a Verizon person would see my post as there has to be something particular to Verizon I think that someone who does/handles repairs would recognize. I'd find it hard to believe that the 2 calls per day and the ring when I hang up doesn't signify SOMETHING to do with trouble shooting/line testing or hardware characteristics known to Verizon. Again, thanks for taking the time to respond. Now if I could just get a Verizon person to do likewise !

  • HT201442 so why was there an error with me trying to restore my ipod i dont get it please someone explain?!

    So there was an error when i tried to restore my ipod i don't get it.. someone please help me!?

    If not this error:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    What was the error?

  • Help Please Someone! My Iphone isnt working

    Can Someone please help me. My iphone 3gs isnt conecting to my computer. Its a pc. I downloaded like 10 apps from the app store directly to my phone, and ever since then my comp wont connect with the iphone. It will still read it as a mass media drive but doesnt show up in "my computer" does anyone have any suggestions? Please i am desperate for my phone!!!!!!!!!!!!!

    It will still read it as a mass media drive but doesnt show up in "my computer" does anyone have any suggestions?
    Are these not one and the same? This allows for manually transferring photos and/or videos from the iPhone's Camera Roll to your computer's hard drive with Windoze ONLY. Nothing else.
    Are you saying your iPhone is no longer recognized by iTunes when connected which applies with transferring apps downloaded direct with your iPhone to your iTunes library or for installing an app on your iPhone downloaded with iTunes on your computer?

  • Help please!  I need code for a button to stop a movieclip, when both are in a nested animation.

    I'm working on a project that has a button and a movieclip, which we want the button to stop, both nested in a movieclip on the main timeline.
    The button instance = muteBtn
    The clip to stop instance = backmusic
    The movieclip they are nested in = ecard
    There's also a preloader that works just fine on the main timeline.
    I've seen a wide variety of ways to stop a streaming MP3 and they all look way too complicated for my current Flash knowledge level.  As far as I know, if the MP3 is in a movieclip, stopping that clip will also stop the MP3.  If that's just dead wrong and what I'm trying to do will never work, please just let me know so I can struggle in another direction.
    What I'd prefer though would be the coding to make this button work.  I've tried a wide variety of ways to code something that seems like it should be so simple, and keep getting the error "Access of undefined property muteBtn".  I'm assuming this means it can't find the muteBtn in the nested layer.  How do I better define the muteBtn?  Do I then need to add something else that more clearly defines where the clip I want it to stop is since it is nested too?  PLEASE HELP ME!! Thank you in advance!
    Some of what I've tried:
    function endMusic(e:Event):void {
        ecard.backmusic.stop();
    or
    function endMusic(e:Event):void {
        backmusic.stop();
    with...
    muteBtn.addEventListener(MouseEvent.CLICK, endMusic);

    When you target objects, you need to consider the path to the object based on where you are trying to target from.  So if your code is in the main timeline and your button is inside a movieclip, then you need to target the button via the movieclip...
       movieclipName.muteBtn.addEventListener(MouseEvent.CLICK, endMusic);
    As far as stopping a moiveclip resulting in stopping a sound from playing, it is not likely to work.  To stop a sound you need to target the sound to stop it.

  • TS1538 Hi hoping for some help please/ My laptop was in for repair & now doesnt regognise ipad or iphone, it is now being recognised as a camera. Laptop will not allow me to update/reinstall I Tunes. Cannot get driver reinstalled

    HI hoping for help pls, laptop was recently repaired& cloned, now will not recognise iphone or ipad, only sees iphone as a camera. Have spent ages trying to reinstall itunes to get so far and for it to fail. TRying desperately to reinstall driver for iphone now , have gotten as far as last steps to find folder in cdrive, found mobile file and there is no driver file at all. Am not the brightest tech lady so any easy to understand tips please am lost and cannot sync either pad or phone.

    you have a ps cs4 license for mac and you have some way of finding your serial number.
    if yes, download an install the installation file.  if you already have the installation file, what is its name and file extension?  (eg, if it's one file, it should be a dmg file.)
    if you need the installation file,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Help Please!!  Best Practices for building an NDS Project...

    We are doing a Proof of Concept on using NDS to develop non-SAP Java applications. We are attempting to determine if we can replace our current Java development tools with NDS/WAS.
    We are struggling with SAP's terminology and "plumbing" for setting up/defining Java projects. For example, what is and when do you define Tracks, Software Components, Development Components, etc. All of these terms are totally foreign to us and do not relate to our current Java environment (at least not that we can see). We are also struggling with how the DTR and activities tie in to those components.
    If any one has defined best practices for setting up Java projects or has struggled with and overcome these same issues, please provide us with some guidance. This is a very frustrating and time-consuming issue for us.
    Thank you!!

    Hello Peggy,
    this is my first post but I hope it helps you anyway.
    To learn the SAP "language" I additionally used the a SAP Presentation regarding the SAP JDI.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/java development infrastructure real world use webinar.pdf
    I think this one is quite useful as an addon to the other links for information you already got. Your name also indicates that your mother-tongue language is German. If so, the german version of the book (Java-Programming with the SAP WAS) is already available for purchase and really useful. Then, you can also use the information provided by the University of Potsdam. They have an introduction about how to setup a track in the SLD and then how to setup SCs.
    http://epic.hpi.uni-potsdam.de/nwlab/SC+Track.html
    Hope this helps...

  • Help please with a Static Initializer for ImageIcons inside Jar Files

    At the moment I'm playing around displaying XML using A JTree
    I am subclassing DefaultMutableTreeNode, and want it to have some default Icons set up....
    Sort of like this:
    public class XNode extends DefaultMutableTreeNode
        public static final ImageIcon icon;
       public static ImageIcon getIcon()
            return XNode.icon;
    }The only thing is that for the life of me after trying various things and searching these forums and google:
    I can't work out how to write the static Initializer for the ImageIcon.
    The ImageIcon will need to be created using a URL, cos it will be inside my jar file.....
    the usual...
               URL url = this.getClass().getResource("/images/Exit16.gif");
               ImageIcon Icon = new ImageIcon( url );but I wanted these Icons to be class members..............
    Could someone help?
    }

    DrClap " I don't understand why you put Class.forName in there either"
    A: Because I don't really know what I'm doing.
    I will try that suggestion.
    At present I have this:
         static ImageIcon loadIcon;
         static
              try
                loadIcon = new ImageIcon( Class.forName("cis.editor.xml.nodes.AlNode").getResource("/images/Exit16.gif"));
              catch( ClassNotFoundException cnfe )
                   System.out.println("ClassNotFound: " + cnfe.getMessage() );
         public static final ImageIcon defaultIcon = loadIcon;
         static
              try
                loadIcon = new ImageIcon( Class.forName("cis.editor.xml.nodes.AlNode").getResource("/images/tree_folder_major.gif"));
              catch( ClassNotFoundException cnfe )
                   System.out.println("ClassNotFound: " + cnfe.getMessage() );
         public static final ImageIcon commentIcon = loadIcon;
    //.......... ANd so OnWhy? Because do far it was the only way I could get it to compile.
    And It works..
    However it's a real abortion.. codewise.
    I need to load about 16 Icons that the various subclasses can 'use'
    DefaultTreeCellRenderer - must do somethng similar because it has a bunch of Icons to "Pick from",
    Only How is that done 'properly' ?

  • HT1689 Can't get iTunes .ipad says "too many http redirects " what's that anyone help please? been charged twice for double down chips.

    What does "Too Many HTTP redirects" please? I am trying too report a purchasing problem, but keep getting that message. I'm trying to connect too ITunes.

    Susiebwb wrote:
    Can any one please assist me.... I paid twice for an app by mistake.... ...
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Help please with capture / sequence settings for DVCAM PAL 16:9

    Simple question but I'm baffled by choices for capture/sequence using FCP6 to capture 16:9 PAL DVCAM. Have tried esay set up (not enough options) and also sequence and capture settings manually too many options ) and always seem to end up with borders top and bottom, not full viewer / canvas at correct aspect ratio. Can someone tell me correct settings. I'm baffled by inclusion of 5:4 aspect ratio and whether in the compression box under advanced settings in the sequence settings bow I should select 4:3 or 16:9 and in the seq. settings box itself whether I should check anamorphic 16:9.In audio/video settings (summary tab) there's also a question about playback settings which is set to '(missing) apple firewire pal 720x568'. What's that about. Any assistance much appreciated.

    Don't over think it. There's no reason why you should have to modify a capture preset in your situation. Use the easy setup for DV PAL 48 KHz Anamorphic (assuming your footage is anamorphic and not letterboxed). If you're seeing gray bars at the top and bottom of the canvas, hit ctrl-U to have the windows automatically adjusted to the right size. If you're seeing black bars, then your footage is probably letterboxed. You should use the regular DV PAL easy setup to capture that. If the Video Playback device is set to (missing) it's because your deck or camera is not turned on, or isn't connected to the computer.

  • PLEASE someone explain 2x Apple ID and Apple TV

    I have an Apple TV HD. And I have an Apple ID that is my own for years. I have an iPhone, iPad and a PC and a Mac that all use my Apple ID. I can watch vids from any of my computers on my Apple TV with no issues. Very smart.
    Then I got married. My wife has her own Apple ID, her own PC (no Apple hardware) and her own content on her gear. Now the trouble starts.
    I SHOULD be able to go into Apple TV and have access to the content on my stuff, whether it is on Mac, iPhone, iCloud, iWhatever. If she goes on Apple TV, she should have easy access to her content with no more than a click to say "Hey, it's me." and perhaps a password.
    What I am reading online is that to do this we both need to have the same Apple ID. This is completely unacceptable. I married my awesome wife, not her Apple ID. The crap that is in her content I would never want to mingle with my awesome content. I'm pretty sure she doesn't want my awesomeness mixed in with her crap either.
    Apple is not stupid. Please tell me there is a way that one single Apple HD TV can share two Apple IDs without any such issues. Workarounds & compromises not acceptable from such an otherwise intelligent company.
    S'Noob

    Have you tried setting up Home Sharing on her PC using your AppleID but with her signed in to iTunes using her AppleID.
    Some people have said this will work and under Computers on AppleTV you'd select either your iTunes library or hers depending on what you were going to view.
    I've never tried this as i have only 1 AppleID to deal with but others have suggested it works.
    I agree with you that some kind of multiuser 'login' would be a good way forward - this is something they don't seem to have addressed well.
    AC

Maybe you are looking for