Help Please (This KT3 is driving me crazy)

Four weeks ago i got a KT3 Ultra 2 (MS-6380E) with RAID. I could never get it to boot up. It was stuck at "Initializing Hard Drive Controller". After a few days of reading threads here i get a new PSU (Future Power WIN-400PS) that what some people said it should have:
+3.3v        +5v         +12v        -5v        -12v      +5VSB
  15A        30.0A       15.0A      0.6A       0.6A        2.0A  
And the thing boot-up with no trouble. One week later i did something wrong trying to flash my bois and the board would not power up. I know the i need a new bois chip so i call MIS a the mailed me a new one. I put the new bios in and now the board is back to "Initializing Hard Drive Controller" with the same PSU that worked last time. I have tried many things to get this board to boot up. With and with-out hard drive, memory and even in and out the case. I have tried it with i AMD Duron 600 and 1200Mhz chip. What can and/or should i try to get this board to work right.  ;(

OK, MSI said that they are sending me a new motherboard.  :D Here is where I need so info from you guru's out there. 1) What type of power supply are you using? 2) Tell me what you think of this PSU: http://www.systemcooling.com/modules.php?name=News&file=article&sid=216  and 3) How many watts do you think I need for the following items in my case. Any and all advice is very, very important.
•   2 x 40GB ATA 133 Maxtor hard drives (Raid 0)
•   2 x LG Goldstar 40x12x40 CD-RW   (Model GCE-8400B)
•   LG Goldstar 16x DVD-Rom (Model DRD-8160B)
•   2 x 512MB PC2700 DDRAM
•   MSI Ti4200 128 AGP Video Card
•   AMD 1800+ or 2200+
•   Linksys 10/100 Nic
•   A-Open 56k v.92 Fax/Model
Thank you,
Jixxi

Similar Messages

  • This website is driving me crazy.   All I need to do is to contact a real body for help that is not listed.

    This website is driving me crazy.  All I need to do is to contact a real live body for help that is not listed.
    This shouldn't be that difficult.  GRRRRR

    Post DETAILS about the help you need here and someone may be able to help... some questions to get you started
    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •You MUST use an account with Administrator Privileges to run Premiere Elements
    •(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?

  • Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

    Hi,
    Is there an iPhone involved ?
    If not, what happens  if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
    What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
    Is the Apple ID linked to an iCloud account ?
    In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
    9:14 pm      Friday; April 11, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • This problem is driving me crazy!!! Help please!!

    Hi, I've a 20 inch iMac with a glossy wide screen, which I calibrate using Spyder3. I've also created my own printer profiles with Spyder3 printer.
    I have verify, using the ColorSync Utility, that all the icc profiles are correctly installed.
    My problem is that I'm getting always a color cast when printing using Aperture. When screen proofing, there is no color cast, however, as soon as I try to print and choose form the printing menu the ColorSync profile I want to use to print, then I can see on the preview screen that the pictures gets a yellow color cast, which also is printed.
    I've tried letting the printer to manage the colors, but then I get really dark pictures.
    Trying to compare what it's happening, I've also tried to print using Photoshop and there, when I set Photoshop to manage the colors and select the profile, either the one created by me or the one delivered with the printer, then I also can see on the preview window that the picture gets a yellow color cast.
    Here there is a difference with Aperture, because in Photoshop when I let the printer manage the colors, then I'm getting almost perfect prints and I don't see any color cast on the preview window.
    Could you please help me, I've being trying to solve this issue since I got Aperture 2.0 and I don't know what is the problem.
    when I'm selecting the printer profile provided by Apple (HP Photosmart for series C5100)I can see on the screen that the pictures turns awful with this yellow cast. The problem is that when I select a standard profile is even worst.
    Today checking the profiles with a programm I found on the internet I saw that each icc profile was repeated 3 times, therefore I don not know if there is a conflict. If there is a conflict, where should be the correct icc profile?

    even somebody sent an Email stating that instead on opening a how is your configuration thread they should talk about "null conversion"??
    Null conversion is when the source profile and the destination profile are the same profile. In this scenario, there is no conversion. You can try a null conversion, but the principle is that you should convert from the colour space of the ICC profile that defines the colours of your RGB colourants in Aperture to the ICC profile that defines the colours your printer configuration forms.
    There's a Knowledge Base article on the subject of setting up a colour managed printing configuration. The Knowledge Base article says you should make sure you have a good ICC profile for the printer configuration, as above. There's also the Color Management in Tiger overview (there was an overview of OS X 10.3 similar to the overview for OS X 10.4, but I'm not sure there is an overview for OS X 10.5).
    With regard to the Knowledge Base article, I'm sorry to say it has spelling errors and sentences I'm not sure make much sense. For instance -
    "Black Point Compensation is an adjustment the compensates for the difference between the way black images saturate on a computer display as opposed to the way black ink saturates on a print."
    Technically, you are supposed print with the printing table in your ICC profile, table 0 Perceptual. This table, if your profiling software is any good, gives you softclipping in shadows instead of linear clipping, among other things. It also gives you gamut mapping, and part of gamut mapping is shifting as well hue as saturation.
    You are supposed to proof with Relative Colorimetric, or calculate the media white point into the RC table to derive the Absolute Colorimetric table on the fly. Some people want to print with the Relative Colorimetric table as they hold that there may be less desaturation, although colours outside the destination gamut still have to be remapped - they can't just be left out / clipped.
    The problem with the Relative Colorimetric table is that if your source ICC colour space has a deeper L* than your destination ICC colour space, the difference in lightness levels is lineary clipped and not soft clipped. In other words, you can loose delicate shadow detail in hair, foilage or whatever. This does not happen with Perceptual which is built to manage that problem.
    Originally, Adobe had a low end colour management system that could only handle a relative colourimetric conversion with compensation of the black point to avoid clipping of shadow detail. This became Relative Colourimetric with Black Point Compensation in Photoshop 5, when it first appeared in Adobe interfaces.
    When you are matching from emissive softcopy to reflective hardcopy, you are supposed to be using Perceptual. If the Perceptual table is any good, it should correct for a bluish tint in your paper by compensating the graybalance towards yellow. If you get a yellow effect in a D50 viewing booth, then for whatever reason the Perceptual table isn't doing its job or you are using the wrong paper for the given profile.
    /hh
    Reference:
    http://support.apple.com/kb/TA38346
    http://images.apple.com/pro/pdf/ColorMgmtinTiger.pdf

  • PLEASE HELP! my ipod is driving me crazy!

    hi!
    I have an ipod photo 20gig, I got it two weeks ago and I already had to format it to factory settings once, and I think I'll have to do it again, after putting all that music inside it (it took so long!)
    the first problem was that I was using itunes 5, and I went to a friend's house, I wanted to get some of his music, so I pluged in the ipod, but he had ipod 6 and my ipod went a little crazy. It stopped showing album artwork, and erased the list "compilations", I mean, the songs were still in the ipod but none registered as a compilation (the ones that I originally have as a compilation in itunes)
    so, after trying several things, I decided to format and start all over again. I haven't even finished, and yesterday I went to another friend's house, I needed some files and I wanted to bring all those files in my ipod so I could copy them to my computer. I already installed itunes 6 and the latest ipod software (before I formatted I installed the itunes so I wouldn't have problems)...
    my friend also has itunes 6, but that's not even the problem because I used the ipod as a disk... ¡I didn't even opened itunes!!! and still, it went crazy again, stopped showing album artwork again and deleted the compilation list, again.
    I don't know what to do with it. I have itunes with "manually manage songs and playlists" because my music wouldn't fit in my ipod... I don't want to have to erase it all over again :'(
    I really don't know what to do... I live in Colombia but my ipod was bought in the U.S by a friend, so I don't have warranty here... please help!
    anyone knows some solution?
    thanks!!!

    this worked for me
    http://discussions.apple.com/thread.jspa?threadID=236896&tstart=0

  • PLEASE HELP!!! Font Driving me crazy!!!

    I just installed all of my fonts on my new iMac. These fonts never gave me a problem on my PPC Powerbook so I thought they would be fine on the Intel iMac. I was seriously wrong.
    I have searched through every font in fontbook and can't seem to find this font. On top of that, FontBook is no longer removing fonts when I tell it to.
    Can anyone tell me what this font is called? (Identifont could not Identify the font)
    It has invaded EVERYTHING: Safari, Mail, Word, etc. At least the finder looks fine because then I might have considered trashing everything but it has already taken me a month to get this up and running so that is not an option right now.
    Please, are there prefs. files I can trash or a way to reset Font Book? I am at my wits end here.
    Thanks in advance!!
    Message was edited by: Sandy W
    Message was edited by: Sandy W

    Somehow, the font shown has taken over Arial. This happened in a recent thread here. Not with the exact same font as yours, but the wrong one nonetheless. The user replaced Arial with a new copy from the original OS X installation disk and fixed the problem. See the last section in Font Management in OS X for instructions to replace one, a few, or all of the fonts OS X comes with.
    But start with orangekay's suggestion to clear the font cache files. That may be all it will take.
    The link, or one of the links above directs you to my personal web site. While the information is free, it does ask for a contribution. As such, I am required by Apple's rules for these discussions to include the following disclaimer.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • This is seriously driving me crazy

    I am trying to download the Creative Cloud application or even just Photoshop which I urgently need for tomorrow. I have already posted that while using the online web download page, when I click on the download button all I receive is a blank page. The last piece of advice I was given was to use the chat option on one of the Adobe pages but that didn't connect either.
    Now when I try to follow any replies to that post all I get is a blank page when I click on any option on the "My Stuff" link. What is going on? Also, can someone please, please, please help me. This is really frustrating. All I want to do is download the CC stuff I am paying for.
    Sorry if this sounds nasty but I am getting desperate here.

    I have posted this problem on other forums where I did post the system and browser info. There are many similar forums that could cover this problem I wasn't sure which one to use and I said, I really needed it. Even though I was getting help, I desperately needed Photoshop, at least, to be working for Tuesday night. This issue is really keeping me back at work. I have had to stay at work late all this week which is having a knock on effect at home. I am really mad at Adobe. All I need is to download their programs from the download page. I am just in from work and will try the suggestions you made as soon as I can.
    I am using Windows 7 64 bit and tried both Firefox and Chrome browsers without success. Both browsers are working fine with every other site I use. Like I said I am sorry this sounds a bit nasty and short but I so needed the program to be installed.

  • Help please, this issue has gotten me to the point of frustation!!!

    so i downloaded PC Companion from the SE website, and it installed in my computer just fine...i'm currently running android 2.1 on my xperia x10 and the phone connects to the computer just fine too. the problem is that when i load up the PC Companion the dashboard doesn't load, so all i get is a blank page (i've included an image if it helps you help me). I've spent quite the ammount of time on this forums reading, and i found that there's a lot of people with other problems related to the pcsuite software, and i've found other people have the same problem that i have with this software. As i said, i've read as much as i could before posting this, and i've tried most of the solutions people have posted but nothing have worked for me, so i've just given up and don't know what else to do. Any help would be much apreciated, thanks in advance.
    Attachments:
    sepcc.jpg ‏49 KB

    Hi all,
    Thanks to Frukttime10 we identified and find a way to solve the problem.
    For those who have the problem please do that:
    1) Go in the registry (open a dos command and type "regedit"):
         a) Go to "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0" and verify the key 1400 has value 0 (if not change to 0).
         b) Go to  "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet   Settings\Zones\" and verify that you don't have any "crappy folder"  name, as in the attached example http://rapidshare.com/files/454333853/registry.jpg).You should only see folder 0,1,2,3,4. If any other folder with strange name is present delete the folder.
         c) Go to  "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet   Settings\Zones\0" and verify the key 1400 has value 0 (if not change  to  0).
         d) Go to  "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet    Settings\Zones\" and verify that you don't have any "crappy folder"   name, as in the attached example http://rapidshare.com/files/454333853/registry.jpg).You should only see folder 0,1,2,3,4. If any other folder with strange name is present delete the folder.
    2) Close PC Companion using the option "exit" from systray (right click on PC Companion icon in systray).
    3) Re start PC Companion => Your dashboard should now be displayed.
    If some of you still have the problem, please export the following registry key and provide it:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet  Settings
    Hope it helps.

  • Help please! start up problems plus crazy sounds!

    hi!
    i am in great and desperate need of help (i have a paper tomorrow and my powerbook goes crazy!) and i'd appreciate any replies. anyway, here's the problem:
    last week i had a new cd-rom installed (the hardware) and had an additional memory added to my powerbook. anyway, last night, i was importing music from my cds to the laptop and then it starts having this crazy gurgling sound coming from the bottom left of my laptop, where the fan is (i believe). anyway, it stopped after a while.
    however, this afternoon, i was importing music again when it just went crazy with the sounds and won't stop. everything then hanged, including my word and powerpoint document, my internet browser, everything. it wouldn't even respond to ctrl-option-esc. so i removed the battery. i made it rest and tried opening after an hour.
    it won't start up. it just makes the crazy sound and goes to that all white page with the apple in the middle. it just stays in that mode, with the loading thingy going round and round, but nothing's happening. meanwhile, the laptop continues making crazy sounds and i can't access anything except that page.
    if anyoen can help me, i'd really really appreciate it!
    thanks!
    phoebe

    well I would say it means that theres a problem with the CD rom or memory. I would remove the new hardwhere and see if that helps. Then if it does I would backup everything and then add the memory and see if it works then if it dose then add the CD rom if it doesn't work after that you know its a bad CD rom. If the memory makes it have a problem remove it and add the CD rom if it works then you know it was the memory. Then I would buy a program call techTool Deluxe or Pro that allows you to test your computers hardware Or another way thats alot less time consumming is just remove the new hardware hope this helps

  • I have a ipod touch 2nd generation and using windows vista? Cant get the ipod touch to show in i tunes and or windows. I thought I had trie everything but cant figure this out. Driving me crazy

    Windows cant find the driver for my ipod touch 2nd generation. Can somebody help?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • NEED SOME SERIOUS HELP! MY IPOD IS DRIVING ME CRAZY

    well basically I have a ipod touch 4th gen and it is a 32gb model and i have 15gb of memory left.
    Why is my device being very slow.
    Please help someone. It crashes and just lags etc.
    Much Aprreciated

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT3964 This mac is driving me crazy

    I bought a macbook pro 15-inch, mid 2009 2.8 GHz intel core 2 Duo, 4 gb 1067 MHz DDR3, NVIDIA Geforce 9400M 256MB Mac OS X Lion 10.7.5, After I did a reinstall of the os I have no camera and no wifi. Before the reinstall I had the message: Wi-Fi:no hardware installed
    I have a new macbook pro 13 and it works great, I love mac. I used to be Microsoft certified but I changed my major in school. I have twelve computers, mostly unbuntu and windows seven so I am fimiliar with terminal and programing. Is there a way I can fix the macbook 15 through terminal or should I consider changing the os to mountain lion instead of lion? Any advice will help, Thank you in advanced, G2.

    I have reset the SMC and that did not work. The weird thing is I got the wifi to come on but when the computer restarted it went off again and the computer is not even recognizing the hardware now. Just I thought I had the problem fixed it broke again, just my luck. One of my friends said this particular macbook pro has a problem running OS X lion and suggests I change it to run OS X Mountain Lion. Thoughts on the OS change? Also, are there "drivers" for Mac? I know that looks like a weird question but I am not familiar with Mac like I am PC.

  • This JAR is driving me crazy! Dukes to come...

    Hi all,
    I can create an executable jar, both programmatically and from the command line and the internal directory structure comes out fine, just as expected. However, If I double click on it, I get the dreaded "Cannot find main class, program will exit" error.
    I have checked and double checked my manifest and it seems fine too. This is what is created inside the jar:
    Directory called "jai" containing class files
    Directory called "META-INF" containing one file, "manifest.mf"
    Manifest looks like this:
    Manifest-Version: 1.0
    Main-Class: jai.Run
    including the empty line at the end. Run.class does exist inside jai. I have also tried changing the main class to jai/Run with the same result. I just have no more ideas on what could be wrong even after trawling through the many postings on this topic. Any suggestions would be reaaaallly appreciated. I am so desperate that I will definitely add Dukes to this topic when I next get some more, but at the moment I'm all out!
    Thanks in advance!

    buckman1:
    you may be on to something. There IS a jar inside the jar. The purpose of the main class is to extract the files from the outside jar, and run this one. (Frustratingly, the jar inside executes perfectly when double clicked!). Can you expand on what I have to do in the manifes? However, I don't think that's my problem as the error message is "Can't find main class", so it leads me to believe that the main class doesn't even get a chance to run.
    Here's the directory structure inside the jar:
    /META-INF/MANIFEST.MF (on checking, this always gets changed to upper case even if you add it in lower case).
    /jai/Run.class
    /jai/ua.jar
    /jai/data/installConfig.txt
    and that's it - only small.
    Below is the Run code (obviously untested as I can't get the jar to run!):
    package jai;
    import java.lang.Runtime;
    import java.io.*;
    import java.net.URL;
    import java.util.*;
    import java.util.jar.*;
    import java.util.zip.*;
    import java.security.*;
    public class Run {
      public Run() {
      public static void main(String[] args) throws IOException {
        extract();
      private static URL getJar() {
        Class theClass = new Run().getClass();
        ProtectionDomain pDomain = theClass.getProtectionDomain();
        CodeSource codeSource = pDomain.getCodeSource();
        URL loc = null;
        try {
          loc = codeSource.getLocation();
        catch (Exception ex) {
          ex.printStackTrace();
        return loc;
      private static void extract() throws IOException {
        String strJarFileName = getJar().toString();
        JarFile theJar = new JarFile(strJarFileName);
        Enumeration enuJarEntries = theJar.entries();
        while (enuJarEntries.hasMoreElements()) {
          JarEntry jeFile = (JarEntry) enuJarEntries.nextElement();
          //strTempDir is the Dir where the files are to be unjarred
          File oneFile = new File(System.getProperty("java.io.tmpdir") + "/" +
                                  "JAITEMP" + "/" + jeFile.toString());
          if (jeFile.isDirectory()) {
            oneFile.mkdir();
          else {
            CheckedInputStream cis = new CheckedInputStream
                (theJar.getInputStream(jeFile), new CRC32());
            FileWriter fw = new FileWriter(oneFile);
            BufferedWriter bw = new BufferedWriter(fw);
            for (int i = 0; i < jeFile.getSize(); i++) {
              bw.write(cis.read());
            bw.flush();
            bw.close();
            fw.close();
    }

  • When I am trying to use or am using my apps here lately they are turning off, how can I fix this it I driving me crazy?

    I am really getting frustrated with my apps turning off. It happens several times a day. Does anyone have any ideas why it is happening an how to fix the problem?

    Hi Friend,
    This is happen with me as well. So I turn off my iPhone and wait for few minutes and turn it on again always solve the problem.
    Hope it will be helpful

  • Help!!  Restore message driving me crazy!@

    I have a 4gb nano that shows the "use itunes to restore". (windowsXP) I have hooked it to my main computer with the latest version if Itunes and I get the message that the nano "needs to restore" loop. So I have reformatted, restored (from ITunes and also from the updater, changed drive letters (3 or 4 times), everything that the forums have suggested. Then I went to an older computer and installed itunes version 6plus. This version of itunes recognises my ipod! Will sync and play songs, delete songs. etc. Everything Honky dory until i disconnect the ipod from the computer and then I get the 3 language "use itunes to restore" message again and nothing else. So what else is there for me to do? tried different usb ports, different cables, different computers. I know this is a definite software problem. The harddrive works fine in windows and also in itunes version 6+, but not on its own or version 7. Battery has a great life.

    I understand why you would think that, but logically it doesn't make sense. I can read and write to the ipod with windows explorer with no problems, so the flash drive seems to be ok. I can also load, read and play songs through Itunes 6 on the computer with no problems. The problems start in Itunes 7 and when the ipod is used as an ipod alone....not a drive. The diagnostic windows tell me the drive is fine and the battery is ok (just a little low on voltage) but hubby says not enough to worry about. If anything was wrong with the hardware I wouldn't be able to use it as a drive would I? Its almost as though the thing is "stuck" on the boot up window of "use Itunes to restore". I even tried to load rockbox. The software all loaded but I still got the itunes restore window on startup and thats as far as I can go. Another thing I noticed recently is I can't seem to turn the ipod off! I can reset it but it just "reboots". After the restore notice about 10 seconds later the whole screen will blank out. Also when I plug the ipod directly to the wall to charge, I also get the apple...then the itunes restore notice...but never a battery charge icon (like my classic 20gb)...is this normal? This nano was given to me - (Also, this is a first generation, but I posted in the second generation thread) Would a repartition work?

Maybe you are looking for