Help Please: Turning Spreads into separate pages

I don't use InDesign often and believe the solution to my query is probably quite simple.
I am using ID 5.5 on a PC with Windows7.
I created a innd file with no problem.
I exported it as a pdf.
When I open it in Acrobat the pages show up as full spreads - (two pages on one page).
How do I make the pages come out separately?
Thanks in advance for any assistance.

First you should choose Pages not Spreads as en export option.
next check you Acrobat options:

Similar Messages

How to turn a doc designed for spread into a page ordered pdf?

I am a relative InDesign newbie, so please excuse my ignorance. I have document of installation instructions that is printed on a single double-sided piece of paper, which is then folded. So in InDesign, there are two layout spreads. The first one includes actual pages 2,3,4,5,6,7,8, and 9. The second one includes 10,11,12,13,14,15,16, and 1.
After updating this I want to create both a spread version of the pdf for a printer, plus a regular page ordered pdf for web viewing. I am not clear on how to do this.
I am using CS5.
Thank you in advance for your help.

There are two "pages". Not sure how they are referred to in InDesign, but when you look at the InDesign doc, you see two separate "pages", each one divided into 8 sections. There is also a third "page" which includes all the specs for the printer (it is in the spread version of the pdf, but is not printed and not included in the web version of the pdf).

Break photo gallery into separate pages

I have so many pictures in my iphoto library that I'd like to share on gallery. However; I find that as I upload more and more picture, the gallery takes too longer to load. I am wondering if it is possible that I can break the gallery into smaller segments and put them on separate pages? If so, how ?

shakur:
As users we can control how many photos we put in a single gallery but not creating "pages" of galleries. You could create an iWeb page with the galleries on the page like this. But once you bring up any gallery by clicking on it, if you go to the main gallery you're in the same situation waiting for all the items to load.
But the first visit to the web page would not be dependent on loading the galleries.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to split PDF pages into separate pages?

I have a PDF document that is in booklet format (i.e., front cover and rear cover on a single page) with two pages to a single 8-1/2 X 11 page size. Is there an application that can split the double pages into separate PDF pages? I don't want to use screen capture to create separate PDF's if there is a better way.

There are a lot of utilities for PDF files so you might search at CNet Downloads or MacUpdate to see what's available. PDF Clerk and PDF Pen may let you drag each page out of the document as a separate file. Even Preview may let you do the same.

Help Please ::: Quicktime .mov into iDVD 5 playback or encode problem issue

Originally Imageready files burned into Quicktime. Importing Quicktime .mov into iDVD results in project which looked great in preview, but after burning images were elongated, flattened. I am stumped, especially given preview results would indicate no such problems but unsure where to analyze on the DVD burn end to check. Any tips on what/where to check? Have tried re-importing original ImageReady (Photoshop) files into new Quicktime .mov (original project was done on OS 9 fyi). But no change in results.. any help greatly appreciated.
iMac Mac OS X (10.3.9)

Thank you for the feedback. I wasn't privy to the process that converted these files originally but suspected the theory on compression/codec initially used.. may re-convert. Also will try Disk Imaging... seems that this is not an uncommon problem in the iDVD 5 world...
regards, Senor Peaches
Originally Imageready files burned into Quicktime.
Importing Quicktime .mov into iDVD results in project
which looked great in preview, but after burning
images were elongated, flattened. I am stumped,
especially given preview results would indicate no
such problems but unsure where to analyze on the DVD
burn end to check. Any tips on what/where to check?
Have tried re-importing original ImageReady
(Photoshop) files into new Quicktime .mov (original
project was done on OS 9 fyi). But no change in
results.. any help greatly appreciated.
iMac Mac OS X (10.3.9)

Placing a large number of files into separate pages

Hello,
Let's say I have 50 pages in an InDesign document and also 50 different eps files in a folder. Can InDesign place these 50 eps files on each page? Thank you.

The supplied script ImageCatalog will do this. Launch the script, select the folder source, select 1 image per row and 1 per column, and you will have 50 images placed on 50 pages.

Page over flow - please turn over

Is it possible to add text "please turn over" if the page overflows to another page?
I have designed an In design document that get variable data filled from an external source. When this happens the page may or may not overflow to a new page depending on the data that goes in the document.
I want to is to add text "please turn over" only if the page over flows? How do I do this? Can this done in In design? Page Overflow works fine. Not sure how to add a conditional text. Is there a way to check if page overflows in design?

Pages do not overflow in InDesign, textframes do.
Beware of terminology issues. In scripting, textframes have a property "overflows", which indicates there is "overset" text in the frame, that is, there is not room enough in that particular text frame for all of the text and it does not thread to a next frame. That last part is, by the way, the indicator you are looking for here: if a text frame "nextTextFrame" is valid, then there is a possibility text runs from the current into that next frame.
It's only a possibility because it is perfectly valid and possible (and often true) that this next frame is totally empty, so you might want to double-check on that.

How do I separate pages from a PDF?

How do I save a pdf form that is 2 pages into separate pages? So I would end up with 2 separate files.

Hi separate pages,
To separate pages, you need to use Acrobat. If you don't have Acrobat, feel free to give it a try. You can download a trial from www.adobe.com/products/acrobat.html. (In Acrobat, you choose either Extract or Split from the Pages pane in the Tools panel.)
Best,
Sara

How Do I Extract All Pages From A Pdf File and Turn Them All Into Separate Files

Hi i have downloaded 100 reports into a single pdf, that must be extracted into 100 seperate pdfs. A prety straightforward question, that i was not able to find a straighforward answer to.
Thanks for your help in advance!
Matt

i have Adobe Acrobat Pro, Version 10, would that work?
Mind you, I want to take the 100 pages and turn them into 100 pdf files, avoiding of course going through the process of doing it one page at a time, one page at a time, one hundred times lol

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

ok turn it off manually and turn it back on while holding the apple logo bottor or the function botton this will give you an option to choose if you want to startup with osx ow windows. let me know if this works
<Email Edited By Host>

My iphone 4 turned off yesterday very randomly. I had 88% battery when it turned off. I plugged it into the wall and it said i had no battery, then the apple came up as if it was turning on. It went black again and this keeps repeating. Any help please ?

My iphone 4 turned off yesterday very randomly. I had 88% battery when it turned off. I plugged it into the wall and it said i had no battery, then the apple came up as if it was turning on. It went black again and this keeps repeating over and over. Any help please ?

Battery could be at EOL. Try getting it replaced.

Putting jalbum page into iweb.. Help please.

I would like to find an easy step-by-step description of how to get a jalbum page intergrating into a iweb as a separate page. Is this possible. I see posts say yes it is possible, but I see no clear instructions for doing this. I am basically "code illiterate" so I really need step by step instructions and explanations.
I use Aperture for my photos....
Thanks so much

Make sure you do not use this garbage :
<IFRAME SRC="http://oldtoad.net/Hubbel/index.html" WIDTH="800" px HEIGHT="800" PX FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>
Use this :
<iframe src="http://url.to.file.html" frameborder="0" width="500" height="500" scrolling="no" allowTransparency="true"></iframe>
Or :
IFRAME ALTERNATIVE IN THE HTML SNIPPET

Importing WMA files- turn into mpeg 4 files- Help Please!

I've just installed iTunes for the first time, and while converting my WMA files, it has turned them into mpeg4 files. How can i turn them back to mp3 files????

If the "Kind" says "MPEG Audio" then what you have are MP3 files.
The format to which WMAs will be converted is controlled by the setting in Edit > Preferences > General > Import Settings > Import Using.

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Pages 5.2 - When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?

When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?
Any Help?I know the update has only been out a while but if anyone has an idea why it is doing this, please let me know!

But you are telling me something I already know.
Be precise.
It is not Pages '09 that is broken.
I am back in Mavericks and testing Pages 5.2.
There are improvements, we shall see how useful, but in less than a minute I have already discovered bugs.
Peter

Help Please: Turning Spreads into separate pages

Similar Messages

Maybe you are looking for