Help please w/ Analogue connect

Hello,
I have purchased an X-fi xtreme music through my local computer builder. when they ordered the card I asked them to pick up the home theater connectors.
http://us.creative.com/products/product.asp?category=3&subcategory=55&product=4309
they told me that they were out of stock and couldn't be ordered till later.
So I was wondering if I could replace them with any stereo analogue jack. I have inputs for 5. (6 inputs)so i didn't really need the extra 2 channels that these cables provided. Is there a big difference(or any) if I use a non CL cable with my X-fi?
Are there any common brand cables people would recommend?
Thank you so much

GwhitleyB,
You will be fine using any standard 3.5mm stereo minijack to dual RCA cable.
Jason

Similar Messages

HT3669 Help please: Unable to connect HP4350 Laser Jet to network

I just purchased the printer today (replaced an exact same printer) but am unable to connect it. The printer is not appearing in the “Nearby Printers” list so I tried to manually add it with the IP address but keep getting message: “Unable to verify the printer on your network. Unable to connect to “......” due to an error. Would you still like to create the printer?” I tried, & said continue but it does not work, printer que says “Printer not connected” I feel like I must be just missing a simple step. I went through & reset the printers, did the disk utility, unplugged everything, shut off & restarted & NO LUCK! Help Please! I have spent all afternoon trying to figure this out & am regretting not submitting my issue on here sooner...
Thank you!

How do you know what the IP address is?

Help please! UD connect datasource can not stay in synch with source table

I have been using UD connect to extract data from Sybase table views for 2 years already. As many who have used UD connect know it is very diffcult to get it to work. But I went through all that and at least it has been working fine except sometimes difficulty transporting. And I am aware of all major OSS notes about UD Connect.
However this loading error has been driving me crazy. Almost on a daily basis some data loads would fail with error 'DataSource (datasource name) has to be replicated '.
So I re-generated the datasource and activated infosources, test loaded and it all worked fine. Come next morning it would fail again with the same error.
I talked with DBAs and they swear that no table changes were made overnight. then after it keep happening for several days in a row, I ruled out table change possibilities. Especially when I read this morning the error message:
DataSource (datasource name) does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 2007.05.01 17:40:59.
The time stamp in the BW system is 2007.05.01 17:39:45.
The timestamp is only less than 2 minute apart.
Can anyone give me any pointers?
I now have a production support problem everyday.
Any help is greatly appreciated!
Julian

I am in need to automate the UD Connect process in SAP BI. I am trying to push the data on daily load basis from SQL Server 2005 to SAP BI. I was told to use UD Connect due to some restrictions.
Could you plz let me know how I can automize the UD Connect process. I have a minimum experience configure the RFC destination etc. But that is not enough to go and start the process.
First I wanted to know how the view will be taken it to SAP BI?
Before the view is moving to SAP BI, will the UD Connect converts the view into Flat file and then transfers to SAP BI?
If it converts to flat file, where will it be stored in SAP BI? Is it stores in Application directory of the BI server or something else?
If it not converts into flat file, then how can I automate this process on daily load basis, for this should I write any ABAP program? If yes, please let me know the pseudo code how I can do it?
I am really confusing about the daily load basis.
It would be highly appreciated if you let me know the process.

Help Please, extremely slow connection speed with ...

Please can someone help me with my broadband conection, it is extremely slow.
I have posted the stats from my router and a set of results fr0m the BT Speedtester.
I know the connection time on here is new, and I know to leave the router on permanantly, it is not normally swtched off at all.
My IP Profile is only 0.25Mbps. How do I get this reset ?
Thanks
Russ.
FAQ
1. Best Effort Test: -provides background information.
Download Speed
0.23 Mbps
0 Mbps
0.25 Mbps Max Achievable Speed
Download speedachieved during the test was - 0.23 Mbps For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps. IP Profile for your line is - 0.25 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.34 Mbps
0 Mbps
0.83 Mbps Max Achievable Speed
Upload speed achieved during the test was - 0.34Mbps Additional Information: Upstream Rate IP profile on your line is - 0.83 Mbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly. If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
We have identified that you have additional services enabled on you broadband line, please click continue to run advanced service tests.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:20:35
Downstream:
287.1 Kbps
Upstream:
440 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
26.3 dB / 29.5 dB
Line attenuation (Down/Up):
16.9 dB / 8.8 dB
Output power (Down/Up):
14.4 dBm / 11.8 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
0 / 57
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 7
Error Seconds (Local/Remote):
0 / 0

are you connected to the master or test socket? do you have other sockets? are you having connection problems with internet dropping out even though the router is connected 24/7?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Need help Please.unable to connect to the music store

I click the song to buy and put in my password.i get this error message.itunes could not connect to the music store. a secure connection could not be established.
check that your computers date and time is correct.then try again.
any help would be appreciated
Thanks
Spaceace08

A BIG thanks to the forum.i can finally download from the music store.The date on my netzo was in the wrong time zone and in internet options SSL3.0 was not checked.i must have a virus or the kids went in and changed things.
Thank you again
Spaceace08

Help Please w/Internet Connection

MACBOOK Mac OS X (10.4.8)
Hi all! Purchased new MB 3 weeks ago. After 3 weeks of major issues connecting to internet via Linksys Router not to mention it messed up my mother's ability to connect to internet, I am beyond frustrated. So frustrated that I am considering returning my MB and buying a HP laptop. I ended up returning the router after Apple tech help told me that many Mac users are not able to connect w/Linksys. Now I have no router and can logon to internet from time to time through a neighbors, but it's not reliable. So today I purchased a Netgear. Have not installed it yet cause mom has been on computer all day working. Is Netgear just a better router? Should I expect the same issues? Any advise would be greatly appreciated. Thanks!

I just got my macbook last week and I was going insane with the dial up which takes 2years and a day to get to one page to another. If you have the funds this is what I did yesterday to get high speed wireless internet connection.
1. go to launch2net.com to download demo software for mac.
2. Call your cell phone company to get internet plan added let them know you want to use phone as modem but don't listen to them if they tell you can't do it. My phone company didn't know Jack.
3. Bluetooth your cell phone to mac
4. Try to connect to internet with launch2net. Launch2net will automatically find cell (only if it is right cell phone)
5. If you get on go ahead and purchase full verison of launch2net about 80 eur dollar aka $116 us dollars but it is soooooo worth it.
I have tmobile service and I already had 2 cell phone numbers. I have Sidekick3 and MDA. Neither worked so I had to go buy Razor phone for $230 w/o upgrade so I don't have to extend service contact. As soon as I charged Razor launch2net was on and poppin. I love it. Now I can surf the web anywhere I want at work, home, in my car, at boring meeting. I love it. It was the best thing. And what make it so bad is the Mac customer service techs don't know swat about their own product.

I need help please with my connection

ok i just bought a Sony KDL-32L5000 HDTV and I also own a PS3. Now my problem is how can I connect it to my Audio system which doesnt have HDMI port and Optical port?
OR recomend a cheap one. It's for my bedroom. Thanks
Solved!
Go to Solution.

Looking at Page 8 of the manual for the tv, you have Analog Audio output jacks just below the the optical output on your tv. You can use this to run it your Audio System, so any sound source coming into your tv will be transfered to your Reciever.
Hope that helps.

A little help please: lost wireless connection days ago

Here's an interesting problem I could really use some help with (I've been working on it for many hours over the past week):
I have a DLink 624 (vC - firmware 2.7) wireless cabled to my iMac G4 (running 10.4.4) that serves as a wireless network in the house. I've got a pc laptop in another room connected to the wirelesss (or anyone else that drops by the house). Its actually all gone very smoothly from installing the wireless router to connecting other laptops to it. I've seen a number of folks mention that the 624 hasn't been a favorite but I haven't had any problems until now.
Over the past few days I've been trying, without any success, to connect my kid's iBook G4 to the wireless network. It had been working ok until I upgraded the iBook to 10.4. Then the connection went toes up.
I've checked the discussion threads and came across a person who had a similar issue with the DL 624 (Oct 24, '05) but there wasn't a solution.
The problems I've encountered with the iBook over the past few days:
- tried using the Apple setup assistant for the internet - no luck
- reset and tried all the network connection options (via system preferences). - when I set it to "Airport" it actually knocks my iMac (with its direct ethernet connection to the router) off the internet! That seems really odd.
- reset all the preferences and tried a direct ethernet connection from the router to the iBook - no change.
- powered down and re-set from scratch the DLink router back to the iMac hoping I'd snag the iBook - no luck there either.
I also trashed the "com.apple.networkConfig.plist" in Library>Preferences but no luck after I reset everything again.
Any suggestions? Thanks.

I think it is the last airport up date. I have a bunch that started not to conecton thursday.

Help Please: How to connect to a cable modem?

Here's the deal: I'm getting a new iBook tomorrow I'd like to get an advance sense of what I'll have to do to get it connected to the cable modem that I'm using with my current Digital Audio G4.
Will the iBook self-configure if I have have it connected to the cable modem when it first starts up, or do I need to record the TCP/IP stuff from the G4 for use with the iBook?
Thanks for your help.

Hi Paul,
If you have a firewire cable, that will work. Just start your G4 up in target disk mode. If you don't have one just connect the two with an ethernet patch cable. Unplug it from the modem and plug it into the iBook then turn on file sharing on both machines. On the iBook select Go>Connect to Server and click on Browse. Double click on the G4 and enter your user name and password (if needed).
John

I am unable to update iOS 6 or 6.0.1 on my Iphone, even with wifi ON! Help please...

I am unable to update iOS 6 or 6.0.1 on my Iphone, even with wifi ON! Help please...

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

I have just updated my PC with version11.14. I can no longer connect to my Bose 30 soundtouch via media player Can anyone help please

I have a Bose soundtouch system .Until today I could play my iTunes music through it via air player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault

@puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks!

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

I keep trying to buy a song on the itunes store but every time I enter my apple id it says "Cannot connect to iTunes store" help please!

I keep trying to buy a song on the itunes store but every time I enter my apple id it says "Cannot connect to iTunes store" help please!

Hello seth53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Help please w/ Analogue connect

Similar Messages

Maybe you are looking for