Help please with nokia n900 calls?

Hello guys please I need a help from you
I have installed call notifier program which notifies me for every message and missed call
After two days, I uninstalled it but then I have a serious problem which can be summarized in:
When I recieved missed call there is nothing to be displaced on the screen as for example my mother is calling... My mother calls me she waits 3 rings till they said that she is calling answer or ignore
But if she doesn't wait 10 seconds, then nothing will appear only they say miss call without any sound ? How can I solve this?

did you install the custom ringtones?
i know that i have the same issue and it didnt happen until i insttalled that.

Similar Messages

Help please with Nokia 6233

Hi
I always have a problem with sending messages, somedays it works, the next day I can send messages to anyone at all while yesterday it was working ok. I went to Orange once and they said I had to go to:
Message Settings then
Text message then
Message Centre then
I have to add in "Orange"
then a mobile number.
They helped to add it once then again that number in message centre is gone and i dont know why its just disappear and i could not send the texts at all.
Can anyone help me to fix this problem permanently please. Its been a headache for me. I should not have bought this Nokia. Always a problem with sending messages
Many thanks

Hi
Yes I did but then its gone disappear, it was ok for 1 weeks, then the next day I could not send messages and when I checked for that number, its gone, dont know why???

HELP please with Nokia PC Suite and MAC

I have just bought the Nokia E71 and incredibly confussed with that instalation process of the PC Suite.
Is there a program that is suitable for MAC?

For Mac users Nokia has two different programs.
You can use isync for syncing your contacts and calender and Nokia Multimedia transfer for transfering music (help of iTunes) and photos(iPhoto). Also from NMT you can sync safari bookmark.
Nokia has different plugin for the device. you need to download the plugin for your E71 to start syncing with addressbook which is available in nokia website http://europe.nokia.com/A4299040
You can download NMT from here http://europe.nokia.com/A4423135 to start working on iTunes and iPhoto and safari bookmarks.
There some FAQ is available for mac users, you can refer this link http://europe.nokia.com/A4423136
Make sure you have installed all available updates from Apple using Software Update and your phone firmware is updated.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Help please with FaceTime. The built in app seems to have disappeared from my iPad2. Bought it in Australia

Help please with FaceTime. My built in app seems to have disappeared.

If K Penguin's suggestion doesnt work, you will have to go to you iTunes and do a reset, that is if you do not have it in your back up library.

Little help please with forwarding traffic to proxy server!

hi all, little help please with this error message
i got this when i ran my code and requested only the home page of the google at my client side !!
GET / HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
Accept-Language: en-us
UA-CPU: x86
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727)
Host: www.google.com
Connection: Keep-Alive
Cookie: PREF=ID=a21457942a93fc67:TB=2:TM=1212883502:LM=1213187620:GM=1:S=H1BYeDQt9622ONKF
HTTP/1.0 200 OK
Cache-Control: private, max-age=0
Date: Fri, 20 Jun 2008 22:43:15 GMT
Expires: -1
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Server: gws
Content-Length: 2649
X-Cache: MISS from linux-e6p8
X-Cache-Lookup: MISS from linux-e6p8:3128
Via: 1.0
Connection: keep-alive
GET /8SE/11?MI=32d919696b43409cb90ec369fe7aab75&LV=3.1.0.146&AG=T14050&IS=0000&TE=1&TV=tmen-us%7Cts20080620224324%7Crf0%7Csq38%7Cwi133526%7Ceuhttp%3A%2F%2Fwww.google.com%2F HTTP/1.1
User-Agent: MSN_SL/3.1 Microsoft-Windows/5.1
Host: g.ceipmsn.com
HTTP/1.0 403 Forbidden
Server: squid/2.6.STABLE5
Date: Sat, 21 Jun 2008 01:46:26 GMT
Content-Type: text/html
Content-Length: 1066
Expires: Sat, 21 Jun 2008 01:46:26 GMT
X-Squid-Error: ERR_ACCESS_DENIED 0
X-Cache: MISS from linux-e6p8
X-Cache-Lookup: NONE from linux-e6p8:3128
Via: 1.0
Connection: close
java.net.SocketException: Broken pipe // this is the error message
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:115)
at java.io.DataOutputStream.writeBytes(DataOutputStream.java:259)
at SimpleHttpHandler.run(Test77.java:61)
at java.lang.Thread.run(Thread.java:595)
at Test77.main(Test77.java:13)

please could just tell me what is wrong with my code ! this is the last idea in my G.p and am havin difficulties with that cuz this is the first time dealin with java :( the purpose of my code to forward the http traffic from client to Squid server ( proxy server ) then forward the response from squid server to the clients !
thanx a lot,
this is my code :
import java.io.*;
import java.net.*;
public class Test7 {
public static void main(String[] args) {
try {
ServerSocket serverSocket = new ServerSocket(1416);
while(true){
System.out.println("Waiting for request");
Socket socket = serverSocket.accept();
new Thread(new SimpleHttpHandler(socket)).run();
socket.close();
catch (Exception e) {
e.printStackTrace();
class SimpleHttpHandler implements Runnable{
private final static String CLRF = "\r\n";
private Socket client;
private DataOutputStream writer;
private DataOutputStream writer2;
private BufferedReader reader;
private BufferedReader reader2;
public SimpleHttpHandler(Socket client){
this.client = client;
public void run(){
try{
this.reader = new BufferedReader(
new InputStreamReader(
this.client.getInputStream()
InetAddress ipp=InetAddress.getByName("192.168.6.29"); \\ my squid server
System.out.println(ipp);
StringBuffer buffer = new StringBuffer();
Socket ss=new Socket(ipp,3128);
this.writer= new DataOutputStream(ss.getOutputStream());
writer.writeBytes(this.read());
this.reader2 = new BufferedReader(
new InputStreamReader(
ss.getInputStream()
this.writer2= new DataOutputStream(this.client.getOutputStream());
writer2.writeBytes(this.read2());
this.writer2.close();
this.writer.close();
this.reader.close();
this.reader2.close();
this.client.close();
catch(Exception e){
e.printStackTrace();
private String read() throws IOException{
String in = "";
StringBuffer buffer = new StringBuffer();
while(!(in = this.reader.readLine()).trim().equals("")){
buffer.append(in + "\n");
buffer.append(in + "\n");
System.out.println(buffer.toString());
return buffer.toString();
private String read2() throws IOException{
String in = "";
StringBuffer buffer = new StringBuffer();
while(!(in = this.reader2.readLine()).trim().equals("")){
buffer.append(in + "\n");
System.out.println(buffer.toString());
return buffer.toString();
Edited by: Tareq85 on Jun 20, 2008 5:22 PM

Can anyone help please with my Time Machine, I have been getting the following message The backup disk image "/Volumes/Mac Backup/Stephen Smith's iMac.sparsebundle" is already in use.

Can anyone help please with my Time Machine, I have been getting the following message The backup disk image “/Volumes/Mac Backup/Stephen Smith’s iMac.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

Help please with 2006 Macbook 13inch, for tv hook up.

Help please with 2006 Macbook 13inch, to hook up to tv for streaming. The display works through VGA but the audio isn't working. Got a plug that goes into headphone jack on computer and connects into the audio jack on the back of tv but no sound. I'm not quite sure what the issue is, whether its the wrong plug, the tv, or the computer. Best Buy says this is the right plug and it seems that it would be, but who knows. If anyone has any experience in this, I would appreciate the help!

Make sure those audio plugs are matched with the VGA plug. With your MacBook running something with audio switch between your sources on the TV Component, Composite and such. See if the sound is coming from another source. If so then you've got your audio plugs in the wrong jacks.
Also could you post the make and model number of your TV.

Help Please with Driver

I need to install the ADB Interface for the X2 onto my computer. Does any one know how or where I can get this driver?

<Duplicate post. Please see Help Please with Driver for any replies. This post will be closed.>

Problem with Nokia N900

I am having a few problems with my Nokia N900. Would really thankful if someone help me with the below issues:
1. Not able to use internet website after some gap. Need to restart my phone and then it will work.
2. Downloaded Facebook widget but it can't work as asking for account validation but when I put user name and password for my facebook just give an error that there are no network connection.
3. Installed aMSN messenger but unable to do the voice chat. Camera is working but voice is not working. Error received that Snack Library Detected. Please guide me how or where to found Snack Library in my phone.
User of:
Nokia N8.00

The phone doesn't yet support this "operator codes" so you need to call the appropriate number instead. I understand this feature will be coming in a firmware update.. See this thread for more info
/discussions/board/message?board.id=maemo&message.id=88#M88

Help please with MCC4 car phone kit

I have just bought a 2 year old car with a nokia MCC4 car kit, it does not fit my existing phone which is a 5210, can anyone please advise on which phone will fit the kit and whether I should or can upgrade the kit without ripping out the trim of my nice new Jag.I have tried a Nokia 1100 and this fits but this is a very basic phone and I am not sure if I can still get one. Thanks

OK your car kit is a cark-128 which is compatable with Nokia 3310 & 3330 phones. Your Nokia 5210 is not car kit compatable so you will have to either buy an old 3310 phone or upgrade your phone & kit to a full new system. You can still buy the nokia 1100 which is now 1101, but its not going to sit & work properly in your existing kit.
Any profesional car kit installer will be able to take out you old kit & refit a new one without damaging you lovely new Jag.
Good luck & hope this helps.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Urgent help please with MIDI pedal

I just got an old awesome midi pedal called the X-15 Ultrafoot.
The pedal has two expression pedals, and 10 pushbuttons/pads. (and two buttons to cycle through additional banks, and a "mode" and "bypass" button)
Somebody please help I am on the verge to having amazing control.
What I want to do is have each pushbutton be assigned to a parameter, which is easy to program. Then I want to make the expression pedal(s) also be assigned to that last selected parameter. How do I do this?
How can I make the expression pedals control over the parameter remain exclusive to just the last selected parameter?!
Somebody save me please thanks

mr kglad i really hope my ( too many replies and questions ) don't bother you.. but please excuse me if they sound foolish or something im a beginner as mentioned...
There must be something wrong with whatever im doing ... ( im so desperate and since you are the only one who replied on me i really need your help please.. )
1- i published the first fla as a swf (10.3 ) with a button with the code you've given me )
2- i published the second fla as a swf (10.3) with another button with the same code you've given me )
3- i made a main page where there are two buttons.. one for english and one for foreign language
English button with this code :
Engbutton.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_4);
import fl.display.ProLoader;
var fl_ProLoader_4:ProLoader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_4:Boolean = true;
function fl_ClickToLoadUnloadSWF_4(event:MouseEvent):void
    if(fl_ToLoad_4)
        fl_ProLoader_4 = new ProLoader();
        fl_ProLoader_4.load(new URLRequest("englishformFIN.swf"));
        addChild(fl_ProLoader_4);
    else
        fl_ProLoader_4.unload();
        removeChild(fl_ProLoader_4);
        fl_ProLoader_4 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_4 = !fl_ToLoad_4;
and the other button with the same code ( the second fla )
IT DOESNT WORK WHEN I TEST THE MOVIE.. the return buttons nor the main ones..why why why why why... ???
i really need your help
THANK YOU in advance

Help please with caurina

Hi, I have a bunch of logos in a file and want to animate with caurina, so I had create a timer to show ( fade in - fade out) the logos one by one;
I had previously fade all the logos with alpha =0; but don´t any idea about how to call it inside the caurina function. my logos all are called logo1, logo2,logo3 etc and I try it to create a variable to hold a number and them put the first part of the name(logo) + the variable to call the movieclip but it didn´t work.Please if someone could help me with this problem.
//this variable hold the 2nd part of the name
var logoContador:Number = 1;
var miTimer:Timer = new Timer(3000);
miTimer.addEventListener(TimerEvent.TIMER, goTimer);
function goTimer(TimerEvent:Event):void
Tweener.addTween(logo+logoContador,{alpha:1,time:1,transition:"easeInQuad",});
Tweener.addTween(logo+logoContador,{alpha:0,time:1, delay:1.7,transition:"easeInQuad",});
logoContador++
miTimer.start();

yes, you where right it was the extra coma before the end, works very soft and cool, and even using a conditional inside can use it as a loop.
Thanks so much for your help, here is the whole script, could be useful to other people.
import caurina.transitions.*;
//this variable hold the 2nd part of the name
var logoContador:Number = 1;
var miTimer:Timer = new Timer(3000);
miTimer.addEventListener(TimerEvent.TIMER, goTimer);
function goTimer(TimerEvent:Event):void
Tweener.addTween(this["logo"+String(logoContador)],{alpha:1,time:1,transition:"easeInQuad" });
Tweener.addTween(this["logo"+String(logoContador)],{alpha:0,time:1, delay:1.7,transition:"easeInQuad"});
if(logoContador>=6)
logoContador = 1;
else
logoContador++
trace("im runing");
trace(logoContador);
miTimer.start();
//- end of script

Need Help Please with Flash Professional - No Cursor Change on Buttons/Links in Mac OS

Hi Folks, I am relatively new to Flash Professional but I recently built a very nice flash website with very little problems. I noticed after I uploaded my site to my server, that my mouse cursor did not change from an arrow to a finger on any of my buttons. It did change on the hyperlinks, but not on the buttons. Everything still worked fine but there was no indication to the user that an object was in fact an interactive button. I found this code: button1.buttonMode = true; button1.useHandCursor = true; and inserted it for all my buttons and that seemed to fix everything, I tested the site on firefox, ie, and safari. I am using a PC with windows 7. When I went to check the website on a Mac powerbook, the cursor did not change on any of the buttons and it does not change on any of my hyperlinks either. I have searched all over trying to find a solution and have had no luck. Can anyone please help me with this problem or point me in the right direction? Any advice would be very much appreciated. Thanks so much!!!

Thank you so much for replying! I did in fact let flash professional create the HTML page for the site and have not altered it at all. Would you have any other suggestions as to why it's not displaying my links/buttons on a Mac? I checked out the browsers Firefox, ie, and safari on my pc, but looking thru safari on the Mac, the cursor does not change on any of my links or buttons. Thanks again so much for the reply, nice to hear from a human instead of reading thousands of posts! Very much appreciated!!!!!

Help please with my navigation buttons

Can anyone please help me with my vertical navigation buttons. I'm trying to set up my nav bar so that all the buttons have a background image (button.jpg) behind them at all times and the only thing that changes when touched or the mouse rolls over them is that the colour of the text changes, except when the sub buttons appear, because the name of some of the sub buttons are so long i have created another button image that is longer (button2.jpg), i only want this to appear on sub buttons otherwise the buttons will end up taking most of the pages space. I'm having great difficulties getting the sub buttons to appear with the correct image (button2.jpg) and am getting increasingly frustrated with it, can anyone please help!!!
www.milesfunerals.com/index2.html

index2.html is a broken link for sure. The main index page looks like it's working fine.
A little styling critique if it's okay... Personally I'd have gone with a CSS or Javascript multi-level menu across the bottom of the header. Saves visitors from having to scroll all the way down the page to see every menu item. And I'd rethink the color of the "Miles & Daughters" in the header image. It kinda gets lost in the roses.
If you have a link to the "broken" page please put it up so we can analyze it.

Help please :) with do not disconnect.

I disconnected my ipod and I still get that "Do not disconnect message" And it doesnt even flash.
Can somone please help me with this

Try Resetting your iPod. Hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display. Have a look at this link as well:
iPod won't turn on
iPod stops responding or will not waken from sleep

Help please with nokia n900 calls?

Similar Messages

Maybe you are looking for