Help please with Sound card problem in CS6

I have just discovered that after installing AA CS 6... that the ASIO driver I've had for several years for my Presonus Firebox seems to have disappeared!!!
I have ASIO selected in edit >preferences > audio hardware... but in WIN XP Pro "device manager" my FireBox shows up as a "1394 WDM device" and the driver... although "working properly"... shows up as a WDM driver as well.
Does CS6 replace the ASIO driver with WDM???
If anyone can guide me on how to get back to ASIO I would appreciate. Forgot to mention that ASIO always worked as it should when I was using AA 2.0 and AA CS 5.5
Many thanks in advance for any help :-)

cyberman45 wrote:
I have ASIO selected in edit >preferences > audio hardware... but in WIN XP Pro "device manager" my FireBox shows up as a "1394 WDM device" and the driver... although "working properly"... shows up as a WDM driver as well.
Does CS6 replace the ASIO driver with WDM???
As Bob says, Audition doesn't replace drivers. I'm not sure whether the OS actually recognises the presence of an ASIO driver though, because its primary purpose is to bypass as much of the OS as possible, and give software that does recognise it direct low-latency access to the device. So pretty obviously it has nothing to do with Microsoft!

Similar Messages

Help Please with sound blast

I recently bought a new sound card, i have inserted it and installed it. It is a Sound Blaster Audigy SE. I disabled my onboard sound already. I used the creative diagnostic because i was not recieving sound and it say something about the wave out device not working. When i went under audio and sound controls the sound audigy is list and is working properly but they say no audio device. Under the sound blaster proprities it say working properly but not started. i need to know what to do. I have windows xp service pack 2. a gateway.

raven23,
Here is a similar thread with a suggested solution.

Help please with sound problems with titles in iMovie HD/iDVD

I find on a DVD I am creating that certain titles produce brief, grating noises when once the DVD is burned.
I am unable to hear these noises in iMovie HD.
I have tried re-importing the video and doing all the captions again ~ but the result is always the same: these loud distortions of the audio, but only on a couple of the titles.
By the way, I have found that by setting the volume to 60% on the regular video and setting it to 140% on the clips with titles, I get a result on the burned DVD where the volume appears constant. I have never understood why putting on a title should diminish the volume: seems like a serious weakness in this software.
But right now, it's these unwanted noises that are spoiling my project.
Any answers?
G4 Quicksilver Mac OS X (10.4.2)

Hi again Sue.
I've just gone and read that reference.
No, I've tried extracting the audio and re-doing the title, but when I burn the DVD (and you know how long that takes) I find on playback I have these grating noises.
I suppose I should be grateful they are only brief and affect only a few of the many titles.
Thanks though for taking the trouble to try and help.
Hue in London ['Hugh', 'Hue'... either one's fine!]

Help Please with media pending problem!!

I've been using PP CS6 for a couple of years on a Rain system with no problems at all. Yesterday evening I deleted several old files on my scratch disc, one of them I think contained all of the cache files for all the projects on that drive. Now every project I open it takes forever to load the media, and I get "media pending" Once it all does load I can't hardly play it back because it keeps locking up. I have several projects that I have to get out and am really in a bind here, can anyone give me a hand??

Ronin,
If we're talking about a laptop, then are you running the 2630 or 2630qm? Most likely the qm version, no? It appears that the 2630qm DOES have integrated graphics:
http://ark.intel.com/products/52219/Intel-Core-i7-2630QM-Processor-6M-Cache-up-to-2_90-GHz
You ALSO have an NVIDIA card. Again "Optimus" is simply an "Apple-ism" (like "Retina" or "Flash Storage") for Integrated (aka On-board) graphics working in tandem WITH a more powerful graphics card (i.e. the gtx 560m). I would take a serious look at disabling it via the instructions in the link I sent previously. They may not even have thought up the moniker "Optimus" when your laptop was released. I don't know. Regardless, when the computer tries to switch between the on-board (power-saving and weak) graphics card to the NVIDIA card, you might experience exactly the type of symptoms you've described.
By way of example: Take the Asus g75vx. It comes stock with a 3630qm chip. The 3630qm has no option for on-board graphics at all (aka Intel HD 3000, 4000, etc). The g75vx comes with a gtx 670mx, but if paired with the "wrong" i7 mobile chip, it might just as easily have on-board (Intel HD) graphics, too.
Another way to check might be to open up Device Manager and see what entries are listed under under Display Adapters.

Pls help me with smart card problem

Hi,
currently, i'm developing a system for my final year project. i've developed a webpage in PHP for clinic management. i also implement smart card in my system. the point of it is to make it easier for both parties - doctor and patient. each time patient comes to receive treatment, doc will check patient's smart card on previous drugs prescription. so then, doc will update it based on the treatment given on that day.
the problem is, how i want to transmit the data from smart card to be displayed in the php page? maybe i should use applet but i don't know how.
does anybody has applet source code on transmitting data from smart card to php page?
i wud b really appreciate it...... thanks in advance.

Have you checked the Schlumberger web site?
What do you mean by "parsing from applet to php"? Parsing really isn't a data transfer method except maybe in a very tenuous sense.
And do you really mean an applet (a small program run on the client and embedded in a web page) or are you using it as shorthand for any java program?
If an applet, I suppose you could:
1) use javascript to connect the applet to the web page, which would just happen to be created using PHP. So it would be all client-side operation.
2) use HttpURLConnection (or, God help you, direct socket connections) to connect to a web server and interact with PHP to give/get data. In this case it would be client/server behavior, but the applet would have minimal interaction with the PHP page it's embedded in.
3) Make it really fun (i.e.: complicated) by using javascript to connect to the page, and then use AJAX to connect to the server. I have no idea whether that's even possible using PHP.
Maybe there are other options I haven't thought of.

Help Please, with Annoying painting problem.

Hi:
I keep running in to this annoying problem:
Swing Components not being re-drawn properly after:
Windows turns on the screensaver
or to a lesser degree if the Java program is Iconified / deiconified.
Components with Images on them get corrupted and the image is not drawn properly, maybe just the top cm or so, but it is annoying..
And I can't figure out what or if anything I am doing wrong.
It happens in a few of my applications.........
mostly those wher I have overidden paintComponent()
If someone would like to see if they have the same thing happen, below is an example that demonstrates the problem.
You will probably need to fiddle with you power settings so that you monitor blanks after 1 min. to avoid having to wait too long.
Run the program, wait for screen to blank out, bring screen back,...
If the java picture is not corrupt try re-sizing the JFrame and see what happens.
I am using Win98SE
I have Java:
java version "1.4.2-beta"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2-beta-b19)
Java HotSpot(TM) Client VM (build 1.4.2-beta-b19, mixed mode)
I would appreciate someone trying this out. Even if it doesn't happen for them.
Or maybe there is a glaring Error in my code.... And if so I could fix it..
Here is an exmple program to demonstrate this.
Two classes, The JPanel was obviously meant to do other things but I cut it down..
The main:
import java.awt.BorderLayout;
import java.awt.Container;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.ImageIcon;
import java.net.*;
public class Test extends JFrame
     public Test()
          super("Test");
          Container content = this.getContentPane();
          content.setLayout( new BorderLayout() );
          URL url = null;
          Class ThisClass = this.getClass();
          url=ThisClass.getResource("Background.jpg");
          StarPanel panel = new StarPanel( url );
          content.add( panel , BorderLayout.CENTER );
          this.setDefaultCloseOperation(EXIT_ON_CLOSE);
          this.setSize(400,400);
          this.setVisible( true );
     public static void main( String[] args )
          Test Example = new Test();
}The JComponent - with overrriden paintComponent()
import java.awt.Image;
import javax.swing.JComponent;
import javax.swing.JPanel;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.MediaTracker;
import java.awt.Toolkit;
import java.net.*;
     cut down version
public class StarPanel extends JPanel
private Image image = null;
private boolean imageLoaded = false;
     public StarPanel( URL imageLocation )
          super();
          this.setOpaque( true );
          loadImage( imageLocation );
     public boolean isOpaque()
          return true;
     public Image getImage()
          return this.image;
     public boolean hasImage()
          return imageLoaded;
     public void loadImage( URL imageLocation )
          boolean goodLoad = true;
          boolean Test = false;
          Toolkit T = this.getToolkit();
          image = T.getImage( imageLocation );
          prepareImage(image, this);
          MediaTracker Tracker = new MediaTracker( this );
          Tracker.addImage( image , 0 );
          try
               Tracker.waitForID( 0 );
          catch( InterruptedException IE )
               System.out.println( "Interrupted loading Image for StarPanel: " + IE.getMessage() );
               goodLoad = false;
          Test = Tracker.isErrorID( 0 );
          if( Test )
               goodLoad = false;
          if( !goodLoad )
               imageLoaded = false;
          else
               imageLoaded = true;
          Tracker = null;
     sans any error checking
     protected void paintComponent(Graphics g)
          super.paintComponent( g );
          Graphics2D g2D = (Graphics2D) g;
          boolean T = g2D.drawImage(this.getImage(), 0, 0, this.getWidth(), this.getHeight(), this );
}I have tried quite a few different approaches to remove or minimize this problem, and have read everything I can here on paintComponent() and etc
Help would be appreciated.
No dukes cos I somehow have less than 0.
Arrg my code was all neat - before I pasted it in to the code tags.

I tried your code and did not notice any painting problems. I'm using JDK1.4.1 on Windows 98.
I don't see any problems with your code. Here is the thread I usually recommend when people want to add an image to a component, in case you want to run another test:
http://forum.java.sun.com/thread.jsp?forum=57&thread=316074

Help please with apache installation problem!!!

1)I installed Oracle9i Enterprise Edition.
2)I installed Oracle9iAS standart Edition in separate Home.
3)Apache HTTP and SSL server servicecould not start.
I've got 3 errors:
1.The Apache service named C:\ORACLE\iSuites\Apache\Apache\Apache.exe reported the following error:
[Wed Aug 22 16:18:53 2001] [error] (2)The system cannot find the file specified: RegQueryValueEx(key System\CurrentControlSet\Services\OracleiSuitesHTTPServer\Parameters) <<<before the error.log file could be opened.
More information may be available in the error.log file. .
2.The Apache service named C:\ORACLE\iSuites\Apache\Apache\Apache.exe reported the following error:
Syntax error on line 14 of c:/oracle/isuites/apache/apache/conf/mod__ose.conf: <<<before the error.log file could be opened.
More information may be available in the error.log file. .
3.The Apache service named C:\ORACLE\iSuites\Apache\Apache\Apache.exe reported the following error:
AuroraService - directive already in effect for this Server <<<before the error.log file could be opened.
More information may be available in the error.log file. .
What do I wrong or what do I need to do?
Thank you in advance
Alex

It looks like you have done an installation into a directory that previously contained 9iAS too.
Look for a file named oracle_apache.conf. It is likely that a line with mod__ose.conf is mentioned twice - remove one line. Save the file. This will solve part of the problem.
What leaves, your error "1" might indicate that the service was not created because during your prev install it was not removed correctly.
The installation might contain more errors. Consider uninstalling the software, remove the ORACLE_HOME and services and do a reinstall...

Help please with plug in problem

About 2 weeks ago I began receiving an error message for most every web page I visited, like this: The page “Unable to Load Plug-in. ESPN.com attempted to load an Internet plug-in named “Shockwave Flash”, but the plug-in failed to load successfully."
I never had any problem like this before, and I think it is linked to one of a few updates (not sure at this point which ones I ran) I downloaded from apple around the same time. I have tried to reinstall shockwave, but none of my downloads will "mount" now. I'm fairly new to macs and a little uneasy about getting in any deeper on my own, even if the answer might be readily apparent to a more sophisticated user. fwiw, I'm running OSX 10.4.3.
I would appreciate any thoughts that anyone might have in diagnosing this problem. Thank you.

I set up a new admin user account, logged in, but the problem persists.
I take this to mean that you still can't mount any downloads. What you're saying is that you can't mount any .dmg file by double-clicking on it. Is that correct? If so, see http://docs.info.apple.com/article.html?artnum=75098 and http://docs.info.apple.com/article.html?artnum=106692 for potential fixes. One other thing to try is reinstall the 10.4.3 Combo update before trying to reinstall Safari or the entire OS.

Please help me with scsi HD Problem

Please help me with scsi HD Problem.
Hi for the life of me I cant resolve this.
I have a ms-6378 ver.3 board with 1.1g AMD
i could not install windows 2000 on a Seagate 73Gig 68 pin SCSI Drive ultra wid. after giveing up i added a IDE HD and install win2k SP2 and added the SCSI card all still worked ok
but as soon as i added the hardrive it locks up and it will
not compleat the load of win2k and tried a smoler drive 18Gig 68 pin SCSI Drive. but it will not load windows 2000. i am stumpt. ;(

It sounds like an IRQ conflict. Make sure you diable the primary and secondary channels for the IDE ports to free up the IRQ resources for the SCSI drives. If you are using a separate SCSI controller, make sure it is in the proper PCI slot and does not share IRQ's with other cards.

HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only t

The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667

http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

Audigy 2 sound card problems

I am hoping that someone out there can help me in a crucial situation.
I am using an Audigy 2 sound card with creative 5. speakers.
I also use Adobe Audition to edit, record sessions for my voice-over jobs.
Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
Need your advice and or guidance on this.
Please respond when time allows.
Vopro

Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
restart your pc
download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
once your back in to windows try recording something and see if everything's back to normal
now reinstalling your web cam but don't reinstall using the cd that came with it
find the manufacturer's website and get the latest drivers
install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
and i think we can all agree that old, buggy drivers can be a real pain

Help please with 2006 Macbook 13inch, for tv hook up.

Help please with 2006 Macbook 13inch, to hook up to tv for streaming. The display works through VGA but the audio isn't working. Got a plug that goes into headphone jack on computer and connects into the audio jack on the back of tv but no sound. I'm not quite sure what the issue is, whether its the wrong plug, the tv, or the computer. Best Buy says this is the right plug and it seems that it would be, but who knows. If anyone has any experience in this, I would appreciate the help!

Make sure those audio plugs are matched with the VGA plug. With your MacBook running something with audio switch between your sources on the TV Component, Composite and such. See if the sound is coming from another source. If so then you've got your audio plugs in the wrong jacks.
Also could you post the make and model number of your TV.

HI ,We would like to ask you to help us with the following problem

We would like to ask you to help us with the following problem. As usual we tried to post unmatched received advance payment which is subject to output VAT via transaction SM35. Normally we post the payment to account 501020 (Advances Received from Operating Activities), we generate output VAT by clicking on u201CSimulate Taxu201D. Then we simulate the document and four lines are automatically generated (please see the attached scan of such document posted recently):
40           510000 (Trade Receivables - Receive from Bank)
19           501020 (Advances Received from Operating Activities)
50           400000 (Output Tax (Sales Tax Payable))
40           405033 (Customer Advances VAT)
However when we tried to post it today it is not possible and an error message u201CTax clearing account 405033 may not have open item managementu201D appears u2013 please see the scanned printscreen. This did not happen in the past.
We would appreciate if you could solve it as soon as possible as we still need to post it to period 12.

Hello
You execute the t/code FS00 for G/l 405033 and go the control tab select tick in open item mgt under act mgt in co.code.
Regards
Avijit

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out

I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.

Help please with FaceTime. The built in app seems to have disappeared from my iPad2. Bought it in Australia

Help please with FaceTime. My built in app seems to have disappeared.

If K Penguin's suggestion doesnt work, you will have to go to you iTunes and do a reset, that is if you do not have it in your back up library.

Help please with Sound card problem in CS6

Similar Messages

Maybe you are looking for