Help pls i cant run game on my beloved lenovo G550

how can i upgrade the shared video memory and dedicated memory from 32mb to 128mb.pls help.it is annoying

hi lheickan04,
If you have the Lenovo G550 with the onboard Intel GMA X4500 then graphcis memory allocation can only be done under the BIOS (this feature can usually can be found under Advanced or Configuration Tab). If this feature doesn't exist under BIOS and a game was run, the OS automatically allocates the max memory that the system can allocate by using Intel(R) Dynamic Video Memory Technology and cannot be adjusted manually.
See this similar post by an intel representative for more info.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Cant run games in fullscreen, MSI gt70

    THis is so strange, this happens only on few games
    I run a game, but it closes down and shows desktop, it does not shut down, the icon in bottom bar is stil there, so when I press back that icon, the game window appears only for 1 second and minimizes again itself to desktop
    How to fix this stupid bug?

    It's about these games then. I'd contact manufacturers (if they;re on Steam, contact them). Try other games (newer) to see if they have problems too.
    Try running in "compatibility mode" maybe helps. If not, set game to be in windowed mode, then once working (hopefully) press Ctrl+Enter *or Shift+Enter* and it should enable fullscreen.

  • Help pls i cant use the secondary camera of my nok...

    pls help me i cant use the secondary camera of my nokia n96.. i dont what happened pls help...just when i updated in 20.050 and when i use the secondary camera it says " unexpected error occured."  help pls what will i do?

    first of all, remove your battery and leave it out for five minutes then replace it. see if this solves the problem. if it does not, backp all your data to memory card or the mass storage (16gb) in the phone, or as a backup file .nbu in Nokia PC Suite. then perform a hard reset (*#7370 and *#7780#) to clear the phone to default factory settings. if this still does not work, then try the three-finger hard reset. if this still does not work, you will have to take your phone to your local Nokia Care Centre for them to look at.
    remember to do appropriate backup of all your files first. let us know how it goes.
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • Nvidia cant run game and cant register DLL file

    I have update my Windows 10 OS to tech preview 10041. After upgrade, my Nvidia cant run my games. Currently, I only
    can open my game using Intel graphic. It says some dll file is missing (ex:igdimdum32.dll) which I can find in syswo60 fodler also exe file which is in the right folder. I cant even register those dll even as administrator. 
    Why cant I change folder permission even as administrator. Thank you. 

    reinstall your Nvidia graphics driver using the latest version from NVidia website.
    if issue persist, try to install NVidia graphics driver in compatibility mode.

  • NEED HELP PLEASE! Cant run my k7 Master at 266fsb still.

    i run a K7 Master with a 1.4 thunderbird, onboard scsi, a geforce2 ti, along with 4 case fans and power supply fan, 2 scsi harddrives(7500rpm & 10,000rpm), one 80gig ide drive, scsi cd-rom, and all my usb crap so the cheap power supply was giving me problems.  I then upgraded to an Enermax and it cured all of my problems except for the main problem of not being able to run at full speed, 266fsb.  
    It just freezes after about 30minutes of running at 266fsb.  It starts to get weird trails on the mouse pointer and then after about 6 seconds it freezes...
    It doesnt matter what ddr ram I try, what processor, what heatsink, or anything that I try....it still freezes.
    I'm almost certain its a bad motherboard but I dont know if this is common with these boards and if it can be fixed by me or if I have to send it out to get fixed.
    Thanks for any help.
    -Andrew-

    I've got a similar problem, I can't run my comp at its proper speed
    1800+ XP
    MS 6380 KT7266 pro2
    2x256 DDR
    G-Force 2 MX/MX400 64MB 3D
    Soundblaster Live! 5.1
    Seagate 20 gig baracuda 4
    Cyber Drive 8x/4x/32x CDR/RW
    with a 320 watt p4 support power pack (Not to sure if 320s right I think so though, i seems to work fine, the monitoring program shows steady voltage)
    Luceant 56k modem
    I can only get it to run at 1.1 gig - on the 100 mhz FSB setting, when I try to take it above this I get random crash's soon after start up, and sometimes it'll run for a while before it crash's, I got it to do a benchmark using both the mad onion util and SANDRA, though I had the problem sussed when I swapped the modem with my old comp, but the problem started up again the next day and I had to go back to 100 FSB.
    There are definitly no temp issues, the CPU dosn't go above 45 degrees celcius(set as critical temp) and at the moment is running around 31 degrees celcius about 80 degrees farentfeit I think, I wish you americans would give up on farentheight already, its been done, move to the metric system every one else has :P

  • I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?

    I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
    many thanks Carl.

    You must boot from another drive in order to erase the system drive.
    Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
    Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
    Allan

  • Hi.. Im using ipod touch. my ipod cant play games. everytime i try to play, it turn back to menu.. anyone can help me? thanks ;)

    my ipod cant run apps, i dont know why.. the game run but then it turn back to the menu everytime i try to play my ipod. someone help me please..
    thanks

    If that does not work, try:
    iOS: Troubleshooting applications purchased from the App Store

  • I have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??

    i have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??

    Have you tried "Run" instead of "Save?"
    Do you have anti-virus software on the PC? If you do, try disabling the anti-virus for just 15minutes to allow the download to finish.
    Hope one of those helps.

  • [cs4.0]cant proceed the setup page...stuck at the checking profile system 90%(when the cheking reach 90%, pop up the setup page then gone le, cant install)...help pls

    im using vista home premium sp2...previously i run the installer that which copy from my friend,but the file did not complete copy....so i recopy again the installer file and run again.the problem occur(checking system profile reach till 90% then pop up the loading setup page and gone suddenly,therefore cant install it)
    any solution...pls help pls....T.T

    You must to view the section: http://www.oracle.com/technology/software/tech/windows/odpnet/install10202.html... there you will find all the information that you need for the installation in windows vista. I could to install the ODAC and i have not any problem.

  • If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

    If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

    Hello,
    As frustrating as it seems, your best to post any frustrations about the iPhone in the  iPhone discussion here:
    https://discussions.apple.com/community/iphone/using_iphone
    As this discussion is for iBook laptops.
    Best of Luck.

  • I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

    I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

    Dee002 wrote:
    MacBook's only have 2.0 USB ports.
    Wrong. 
    If you're not going to provide correct advice then don't repsond at all.
    http://www.apple.com/macbook-pro/specs-retina/

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • BC 2.1 cant run on my vista 64bit, can anyone help?

    Hi,
    I did my installation of vista 64bit on my 2.4ghz macbook pro 15" (quite old model, about a year ago) and yes, i did download BC 2.1 and try to run on it.( i think most of the people cant use 2.0 for installing all of the driver.)
    i saw someone was discussed on this forum about failed install for "Keyagent" and "MacHal" file.(sorry if i name it wrong.) I have a same problem as well, so i try to download BC 2.1 ( http://support.apple.com/downloads/BootCamp_Update_2_1_for_Windows_Vista64 ). The problem for now is i cant run that file on my vista! Should i download BC 2.1 32bit and try it or something wrong??
    Thanks for the help, Cheers

    When you are running Vista, put your Leopard DVD in.
    It should ask to run SETUP.exe and install Apple services, drivers, and Boot Camp, including Boot Camp control panel, Apple Software Update, Apple OS Switcher, Apple Time Services.
    You will need to reboot.
    And only then can you install and run BC64 2.1.
    It can also be downloaded via the Apple Software Update control panel itself.
    If your 10.5.0 DVD is not showing anything, it should open to /Bootcamp in Windows.
    Call or check or buy 10.5.6. If it is OEM disc, some didn't have it.
    If on the other hand you are using a program called MacDrive7 (commercial) it use to not work iwth 64-bit versions, and would prevent access to Apple DVD.

  • "You cant run adobe flash cs4 because it is not supported on this architecture" HELP!

    I just installed adobe cs4 design premium, and everything works fine except for the program I wanted most, which is Flash. It has a little circle with a line through the icon and whenever I try to run it, it tells me that it cant run because it is not supported on this architecture. I have already re-installed it four times and it never helps. I cant find any help on this board even though similar questions have been asked. Its on a brand new imac, can someone please help?

    I'm afraid I don't have experience with troubleshooting this install issue to offer any sort of concrete answer about what's the quickest/easiest way to resolve it. Maybe someone else on this forum or a google search will provide some advice from people who have experienced this first-hand and will know the quickest steps to get the software running. If not, perhaps investigate partitions without journaling, or disabling it (the Apple site has info about this if needed).

  • My Pc shutDown When Running Game Then Bettery Be Hot. Please Help Me Fast

    My Pc shutDown When Running Game Then Bettery Be Hot.
    Like iM Play FaceBook Game'S FarmVille Etc Or AnyGame Like San Andreas MultiPlayer / Online Games...... After 10-20 Mnt My Pc ShutDown i ReFormated iT But The Same Problem . Here My Computer Details Please Help Me .. .. . . . . . ..  .. . . . . .. . .. . . . .  i Need Help .. . .. . .. .. . . . .. . .. .. . . ..
    http://img204.imageshack.us/img204/4028/detailsb.png
    Please Help Me i Need Fast Help .... . . . . . . .... .. . .. . .. . . .. . . . .. ..  .. . . .
    subject edited by moderator.
    ps: no need to add "not solved" tag into the subject. 

    Hi and welcome to the forum!
    Which lenovo notebook is it? Does it have a sticker on the bottom bearing a number like 2668-KHU? Let us know that number, there is no need to post S/N though.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

Maybe you are looking for

  • Creating Planned Independent Requirements for an MRP Area.

    Hi All, I am trying to enter Planned Independent Requirements for an MRP Area, with requirement type VSE and I get the following error; "Only stock requirements are allowed when planning at MRP area level". I can enter at the Plant level with no prob

  • Feature 'nested external environment calls' not implemented

    Hi. I've created a .Net 3.5 DLL which is called by a stored procedure using CLR in a trigger. Inside one of the functions I've got an update-statement against the same table as the trigger which calls the CLR code. That update results in a SAExeption

  • Additional language for Nokia N73

    Hi, i am an italian actually in Saudi Arabia for work. The company gave to me a new Nokia N73 bought locally. The only languages available are arabic, french, english german and spanish. The major problem is when i have to write sms in italian. I hav

  • Lookout network

    I have a consultation, I have a server with Windows 2003 which runs 6 Lookout and one PC with Windows XP with LK6, but as when loading the PC with Windows XP becomes slow, decidi to leave the one that has the 2003 is the one who keeps the data base,

  • Remote access certificate authentication: moving from sha-1 to sha-2

    We have an ASA5520 supporting remote access clients using anyconnect; currently the environment is leveraging certificates using the sha-1 hash.      Our CA will no longer be deploying certificates with sha-1 and new users will be getting certificate