HELP PLS: my Silver G4 wont startup...but ventilator keeps on spinning
Hi!
I recently had my Powermac G4 933Mhz on sleep mode. One day, girlfriend unplugged the whole system from plug unaware that Powermac was "sleeping". Since then, the computer is always "ON". i.e. when I plug it back into the powerline the ventilator spins... HOWEVER, the computer is NOT on (screen is off). IF I push the "Start" button (either on computer or screen) the computer will not start (the screen will go to sleep immediately). WHAT can be done? is there a way to reset the machine? It clearly has to do with the fact the computer was on sleep mode when it was unplugged...
MANY MANY thanks
raz
powermac 933mhz G4/ Mac OS X (10.4.3)
I Could Kiss You! That seemed to do the trick! I dont know why it cra pped out on me half way through this process.... but it updated now and all seems well. The only thing is that when I went to Utilities on my PowerMac... Disc Utilities doesn't seem to exist there... so I opened it up using the help tab and when I got to it, the FirmwareRestorationCD.dmg didn't even exist... it doesn't even seem to be in the computer. Have any idea about that one?
I had to download the dmg off the website.
Thank You so much for the help too! You Just saved my laptop and turned it back from a Huge Paper weight to a Working MacBook.
Similar Messages
-
I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles, asking me to sign in and then I get the same message again. This is getting frustrating and I really don't seem to be able to get help. I can't contact customer support because I have a PC and there is a serial number of an apple device required.Can anyone help please?
You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.
-
Pls help me my ipod nano wont charge even if i use other laptop or pc . The battery notification tells its full charge but when i remove my ipod its still not charged
Is it not charging at all? Did you try to reset? If YES to both, request for a replacement of the ipod. Battery or the unit itself is defective. Cheers!
-
hi, please help.
Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
Please please help!!!Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.
-
i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!
Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H. -
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
-
my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????
Might want to post your question in the correct forum. This is the iPHONE forum.
-
my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped -
My ipod touch 4th generaqtion wont charge and i have tried all of the chargers in
the house but it still wont charge but my sisters does??? please HELP !!!!!- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
I'm trying to up grade the os but I keep getting the startup disk is full I ordered more memory I was told this will not help. What do I do?
I think as drive capacities increase, the old 10-15% becomes less accurate. The amount of free space you need doesn't really have anything to do with the drive size. So, increasing your drive size shouldn't mean that you need to have more free GB (which using a % of drive space would mean). You need free space to accommodate page outs (the amount of which would depend on how much RAM you have installed and how memory intensive the applications are), sleep images (again, this would max out at your total amount of RAM), and a bit to minimize fragmentation.
With desktop drives commonly in the 2TB range today, it is certainly not necessary to have 200GB+ free in order to maintain proper operation. I generally find about 30GB to be the minimum I'm comfortable with. Mind you, I pretty much always have way more than that available. But, if I'm working on a system and the amount of free space is at least 30GB, I would generally not site drive space as the cause of any performance issues. I'd say that 30GB is a minimum for a stable system (with 8GB or RAM installed). Of course at that amount, you would still need to free up space if you were to want to install or download any significant amount of data.
With servers being more likely to run into the 16GB of RAM range, more storage would be necessary. Most servers should be well stocked with storage, but the actual needs would vary greatly depending on what's being "served".
The 10-15% thing came about when we used to talk about drive capacities in hundreds of MBs and RAM in terms of KB (not MB and certainly not GB). More drive space is always a good thing, but as drive capacities continue to sky rocket, we don't need to dedicate larger amounts of storage on systems with the same specifications. A set amount of space is required for proper operation regardless of the capacity of the drive installed. -
Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!
I have the exact same issue right now!
-
sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.
Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M. -
Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
I didn't have a signal so I restored my iphone 4s but this always comes up "Your iPhone could not be activated because the activation server is temporarily unavailable" HELP PLS!
Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google. -
I have an i-pad and have just got an i-phone but want 2 use a different I cloud? I've set up new email account and apple ID, but I can't change the I-cloud settings, can u help PLS??
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
Maybe you are looking for
-
Lenovo System Update tells me that all is up to date! I searched at Lenovo for new drivers for windows 8.1 They asked me exactly what notebook I use. For the x1 carbone 3460-4LG (checked 3 times because I couldn't believe it) they discribed my comput
-
Some Blu rays and DVDs come with digital copies and you inset them into the dvd drive and it downloads the movie to itunes and then you can put them on any iDevice. The new iMac does not have a dvd or disc drive. What can I do?
-
Hi experts , Hi have 70 fields in my ALV output. When the data is huge the output format in back ground is destorted ( overlapping). When the data is less i could able to see alla colums appearing fine and can able to down load well? I wanna know is
-
Why is the music clip marked with a yellow warning sign?
While browsing my project library today, I noticed that every music clip associated with a particular project is marked with a yellow "warning" triangle (with an exclamation point in the center). What's worse, the music won't play. I had previously u
-
StringBuffer.toString() not giving complete string in servlet
Hi. I have a servlet that logs various things into a StringBuffer. At the end of the servlet doPost(), I do a sb.toString() and stick the string into a database. My problem is, the toString() seems to give me incomplete strings at times when there is