Help! Pls! Ti4800SE-VTD8X

Help! Pls!
Recently purchased the Ti4800SE-VTD8X card.
Anyways, problem is my system seems to running well slow and i mean slower than my very old PII back up sys!...
I had a Matrox G450 eTv card in the unit prior and things worked fine! I have done a complete reinstall of Xp and things were still slow! Last night i thought i would try the old card and things went back to normal i.e nolonger slow?
Things i have done:
Uninstalled the msi drivers and installed nvidia Drivers and back again!
Changed the settings and only used one monitor...
Changed my Psu
Unplugged all other devices (Sound etc...)
Put some more heat sink solution on the mem chips on the card (Not silver)
Not really sure what else to try? So any help and advice would be greatly appreciated...
Opp Sys: Windows Xp Pro
Cpu: P4 2Ghz
Mem: 1.5gb
Hard Drives: 4 x 100gb Ibm 7200's
Mother Board: 845E Max2 MS-6398E
S/Card: Creative Soundblaster Audigy
Monitors: 2 x 17" Flat Panel Screens
TIA,
Digitech (Or not so as the case may be :-)

Quote
Cpu temp is at 49c is that about right?
Ahh...for a P4 it seems a bit warm but keep in mind that ambient room temp and airflow in the case can influence the temps reported. As long as you took your time and made sure you mounted the heatsink correctly you should be in good shape.
As for the Codegen PSU I am curious about the power specs. Is there a sticker on it that shows amps for the +3.3 +5 and 12v?
Codegen has been known to be troublesome in the past. If you start getting random crashes, reboots etc. while taxing the video, you may consider the power supply as a last resort.
You seem to be in decent shape :D
Take a look here, it's written for an AMD system but you can get some good info there.
Cooling Guide

Similar Messages

Ti4800SE-VTD8X & WDM video capture problem...

sheeesh... I did everything I know to solve the problem... I read every thread on this help forum having the word "WDM" using the search engine and also on other webpages and forums. I can see that I am not the only one having problem with the WDM drivers
Can anyone help me with this ?( :
The WDM driver fails to load and make my system boot up time to around 45 seconds to 1 minute which is normally booting in less than 18 seconds without the WDM driver installed. In the "Device Manager", I see a nice lil " ! " on the "nVidia WDM Video Capture (Universal)" codec.
Here is what I did to date :
1) I had an MSI Ti4200-VTD8X on a different setup computer and had the same problem. I changed my 250 power supply to a 350 watts as I read it might solve some problem but it did not.
2) I exchanged the Ti4200 for a brand new MSI GeForce4 Ti4800SE-VTD8X (MS-8900) and STILL have the same problem
3) I completely change my "old" P4 1.8 to a brand new setup (see at bottom) AND STILL have the same problem.
4) Why did I buy an nVidia product instead of ATI ? dunno...
5) I have tried to uninstall, reinstall, uninstall, reinstall, uninstall, reinstall... huh ? ?( oh yeah, the nVidia WDM drivers 1.21 and 1.22 still doesn't work. I even tried old WDM drivers as some said solved their problem. Installed 1.04, still the same problem.
6) I have tried the WDM from MSI (was happy to see a newer version 1.27) and disaster 8o computer crash with a nice blue screen and reset itself as soon XP loads this famous WDM driver during boot sequence. Had to start in safe mode using the last known working version... At least, that worked...
7) The only way I can make this crappy driver to works (and that is at 50%) is this way
a) in the device manage, I right clic the faulty codec (that XP kindly took the time to open for me to show me that this is not working...) and go to "update the driver"
b) then I click "install from a specified location"
c) then I click "do not search, I will chose the driver to install"
d) then I can see "nVidia WDM Video Capture (Universal)" in the list so I click on it
e) click "next" button
f) XP reinstall the driver withtout the " ! " once I go back in the "Device Manager".
The only thing with that is that it is unstable. Sometimes it might work for 1 hour, sometimes 10 minutes. What it does is it completely crash the application which is using the WDM, for instance InterVideo WinProducer. And here is the kind and gentle warning message box from XP saying : "InterVideo WinProducer has to shut down. We are sorry blah blah blah blah..." and of course you lose any recordings you were capturing or working on...
If I reboot the system, the codec is once again not loaded properly.
So, can some one help me with this ???
Thank you ! :D

Quote
Originally posted by TheDanishGuy
Hey Alesis
TvTool is a program/tool that help you, with TV-out on you GeForce 4.
For more information on TvTool look at this webpage.
http://tvtool.info/index_e.htm
Try and download demo version, and see if you have use for it. I would like to use it, when I want, to watch DVD on my TV.
So now we need MSI or nVidia to make a WDM driver that works with nVidia VGA 44.03 driver.
Thanks man !
I have tried the TV Tool and quite frankly, I don't really like it... For the moment that is... It messed up a little the video settings like resolution and refresh rate. I have had numerous errors also saying to update to the latest version but you already told me about that.
I have noticed something with 41.07 driver that I lost a nice feature that might interest you ! In fact, with this feature, I think you would not need the TV Tool.
I had the option before to maxize the TV out to full screen when the DVD player started or when I watched any video format.
I can have the Windows Media Player (using nVidia nDVD for DVD) running minimized on my main VGA monitor and get the S-Video out run full screen which was really nice. Sadly, this option looks to be nowhere to find with the Detonator 41.07 version. :(
I don't know if there will be a serious revision about the newest Detonator drivers so it can support our card with full features like the full screen one...
When you fix a problem, there is a new one that come out :O
If you get any hint on how to complaint at MSI or nVidia, it would be great to let them know that something has changed since the v.41.07 that makes a lot of nVidia users having problems with the WDM issue.
Thanks again, at least, I can capture some video ! But not able to watch it full screen anymore on the TV out
Let's keep in touch !
See ya !

How to create matrix template help pls

hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
Rajesh

This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/

I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
Re: can i install windows for pc on my mac or do i need the windows for mac?

There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

I have the exact same issue right now!

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

Can't send emails. Can you help pls? Thanks.

Hi, my Mac Book Pro won't let me send emails. It says: Outgoing mail server (SMTP): Gmail Offline. Can you help pls? Thanks.

Help. I have the same problem. I can receive email but can not send email from my MacBook Pro running OS X 10.9.4.
I have been reading posts about this issue until my eyes are rectangular.
I have tried the following:
1. Removing the passwords from the keychain.
2. Trying the various ports (default set, custom 25 alone, custom 465 alone, custom 587 alone)
3. Unticking the Use SSL box. Interesting note, it sometimes self-ticks this box.
4. Supplying full email name in the userid box. Interesting note, it sometimes self-corrects to just the plain userid prefix.
5. Running repair disk permissions
6. Turning offline all mailbox accounts and then turning then back online.
7. Rebooting numerous times
8. Force Quit of Mail and numerous normal quits and restarts.
9. All software updates have been installed.
10. I may have forgotten some of the more bizarre things I have tried but I have not got to the point of deleting the entire account (and all of its 3 years of emails).
I have a sister MacBook Pro (same operating system, larger screen, same ISP, same email provider, same power source, etc.) sitting right next to this one and it is working fine - mail comes in and mail goes out. It is on the same network and I have dutifully copied all of the parameters and this still does not solve the issue. Surely, there is more witchcraft out there that I can try? New to this "posting" process. Not even sure how to get back to see if anyone has any further suggestions. Thanks to all those who have tried to provide suggestions. Much appreciated but I am still stuck with webmail! Arghhhh. Ron

Error 4251 help pls....

i try to burn cd and all i get is error 4251 i have tried to reduced the speed but still i keep getting this error message any help pls from anyone....

Same thing has been happening to me. Hope someone can help!
I burned one CD (there was an error message after burning) and it doesn't play properly. Subsequent attempts to burn the same playlist - and I tried a different playlist too, just in case it was that particular album - result in the error message mentioned in the above posting. It starts to burn, then ejects the cd with the message "error 4251", even when I select a slower write speed. Diagnostics show no problem, but it seems to test only for reading, not writing. Here's the diagnostic message I got:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
TOSHIBA Satellite E105
iTunes 9.0.2.25
QuickTime 7.6.4
FairPlay 1.5.23
Apple Application Support 1.0.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number CBFABDA2556C6D0C
Current user is not an administrator.
The current local date and time is 2010-04-13 11:00:49.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
D: MATSHITA DVD-RAM UJ862ES, Rev 1.90
Audio CD in drive.
Found 16 songs on CD, playing time 71:31 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:44:53
Track 3, start time 10:03:39
Track 4, start time 14:58:64
Track 5, start time 18:14:34
Track 6, start time 22:28:43
Track 7, start time 26:49:15
Track 8, start time 31:10:28
Track 9, start time 35:54:08
Track 10, start time 40:10:03
Track 11, start time 45:14:58
Track 12, start time 49:45:24
Track 13, start time 53:44:07
Track 14, start time 58:27:16
Track 15, start time 62:43:45
Track 16, start time 66:39:60
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive D: MATSHITA DVD-RAM UJ862ES on CDR media at speed 8X.

Now i have tryied everything i need help getting premier pro trial real help pls!

now i have tryied everything i need help getting premier pro trial real help pls!

Hi,
Are you facing issues installing Premiere pro trial?
Please mention your operating system.
Error(If you're getting any)
Thank you,
Mohd Naseem

HT201272 Can't restore previous purchase from old iPhone to new iPhone. It says all purchases are downloaded when it's not. No download icon on the screen, can't re-download as it says "purchased". Help pls!

I've never really had problems on syncing one device to another. However, this time time I can't seem to restore it to the 5s. When I check iTunes it says that all purchases has been downloaded, but of course it's not. When I try to find it so maybe I can re-download it, it reflects as purchased so I can't download it anymore. Help pls...

And you are looking in the Purchased tab in the iTunes store app on them ? On that tab you've selected Music at the top of it, then 'Not on this iPad' and 'all songs' ?
Is that what you are seeing in the Purchased tab, or is there not a Music button at the top of it or are you not seeing anything listed there ?

Help! Pls! Ti4800SE-VTD8X

Similar Messages

Maybe you are looking for