Help plz,how to activate open line item,which is already saved in fs00

hi,
I have created reconsilation where i forgot to check open line iteam,when I try to creat f-53, it is asking, for open iteam ,,when I go back to F-53, i couldnt find, it, to change, what to be done,
or
should i need to delet advance paid to vendor 200305 account, and creat new one, pls suggest me,
thankyou.
Moderator: Respect the rules: do not use SMS language and search SDN before posting

Hi Sükrü
You can read the table E071 with the object id and get the transport request number. Use this transport request and read the table E070, the field "TRSTATUS" will give the status whether the object is locked or released.
Hope this helps !
Regards
Ranganath
PS : Reward points if found useful !

Similar Messages

How to find open line items from the BSID table

Hello Guru's
I need some fever from you......... please any one tell me that How to find the open line items from the BSID table .
please replay ASAP..
Regards,
Raghunath.S

Hi Raghunath
BSID and BSAD are Secondary Index tables for Customer line items. All customer open items are stored in BSID table and Cleared items are stored in BSAD table.
Regards,
Venkat

HOW TO MIGRATE DUNNING LEVEL & LAST DUNNED DATE FOR ALL OPEN LINE ITEMS

Hi,
We need to upload dunning level & last dunned date for all open items (to be done separately i.e. after all open items migrated) which is different for each and every line item so if we use mass upload (fbl5n) we have to do for each and every open line item which is not feasible as open line items in thousands..I tried LSMW also,problem is that for Batch input recording we need to run one complete cycle in sm30 but there is no maintenance dialog for BSEG & BSID table.. Please share your valuable Inputs how we can go ahead..
Thanks in advance

Hi Mark,
Thanks for your reply.
It is complete a Zcopy of a standard one, but we are facing one or two records are not updating correctly out of hundreds of customers in the worklist.

OPEN LINE ITEM not activated in GL

If you are in ECC 6.00 you need to use T.Code FAGL_ACTIVATE_OP provided you are in EHP3 is used to Activate Open line item.
Does anybody have an idea if We are In ECC 6.00 , EHP2 What is the procedure to Activate Open Line item in GL.
Please let me know the detail process

Hi,
If your query which i understood is correct, you want to activate an existing GL account for Open Item Management for which already there were some transactions happened and there is a balance.
With a balance in the GL its not recommended to switch on open item management. You can transfer the balance to a temporary account, make the GL to 0 and then you can change.
Thanks,
Krish.

Clear from Vendor open line item (FBL1N).

Dear,
I have Posted the Invoice and cancelled the same invoice which was in the Blocked status without Release.So its showing in Vendor open line item (FBL1N).
Now we can not release these two docs in MRBR bcz the invoice was cancelled and also it can not be cleared in F.13 bcz which was blocked for paymentu2026
Kindly help me how can i solve this issue and my user is askinig me to clear the same from the vendor line items.
Also suggest how the same will affect the business impact.
regards,
Kannan B

Pl post it in ERP Financials,to get faster replies SAP ERP Financials

To find open line items as in FS10N

Hi Friends,
I need your advise since I don't know the accounting funtionality happening in FS10N open items with standard tables (open items).
The open line items available or showing in FS10N which is not stored in open item tables like BSIS,BSID or BSIK. Some are saved/available in cleard items tables such as BSAS,BSAD or BSAK. But if i consider for my report purpose, ther are other line items of the same document which are coming up in my report those are cleared and not needed as per requirement.
My FI cons says, those document stored in cleared items table(which are still open items in FS10N) are still need to be cleared.
*******In FAGLFLEXA table, i couldn't able to find how to filter a document which is open or cleared item.
Please help me how to differentiate and get my open line items from the tables as same as stored in FS10N.
thanks & regards
Sankar.

Hi,
Let me explain the link betwee tables so that you understand the flow. All accounting documents are stored in BKPF (header data) and BSEG (Line item). From BSEG, the line items are identified according to their account types - K (vendors) D (Customers) and S (GL accounts) and copied to their secondary indes tables.
Each of the above account types have two tables (also called secondary index tables) -
S - BSAS (Cleared items) and BSIS (Open Items)
K - BSAK (Cleared items) and BSIK (Open Items)
D - BSAD (Cleared items) and BSID (Open Items).
Now as per your question, FS10N is for GL acoount balance, so you need to refer to BSAS (for cleared items) and BSIS (for open items).
If you could explain your rquirement in the report, I can try and give you a logic.
Hope this helps.
Thanks and Regards,
Anit

Issue while clearing open line items

Hi team,
While clearing open line items for vendors, customers, and GL's system is posting new line items. It should post without new line items. Example
Customer is having debit and credit line items with same amount i am going to clearing manually thru f-32 here sytem is posting new document with new line items. It should post without line items. I have selected Negetive postings permited check box in OBY6. I have not selected check box in document types. Do i need to change in document type also or i missed anything in settings pls help me to overcome this issue.
Regards,
Nagaraju.

Dear:
The option to create a clearing document WITH or WITHOUT line items depend on the fields of the structure KONTAB_1ST if all the fields are equal in the documents the clearing document will be generated and posted without line items
Please check OSS note 95077. Check the settings in
IMG >Financial Accounting (New) >General Ledger Accounting (New) >
Business Transactions >Document Splitting >Activate Document Splitting
Check the following link for the same
F.13 clearing Document contains Lineitems
Regards

How to clear the line items once posted...

hello experts,
i m workiing on Enhancements in fi/co...i m not able to get the actual exit..
How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item generates)....and in Tr.code f-43 once the due as been settled i.e the payment as been done and same assignment has to be given(2nd line item generates) it has to clear with the transaction f.13.but it is not..there is a report program to check fbl1n(tr.code)...once it is cleared it is shown in cleared items else it is shown in open items.....can any one help me out...
i m providing the tech names of the fields...
same program for both the transactions-- sapmf05a screen no for f-48--304 and
f-43 ---110....
Assignment --- BSEG-ZUONR....AMOUNT ---(cluster table) BSEG-WRBTR....
SPECIAL GL A/C RF05A-UMSKZ(structure)
thanks n regards,
vamshi

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

How to increase the line items against the std no of line items in MIGO

hi,
I have PO with more than 100 line items
During GR system is showing the error message as
Maximum number of items F1 reached
What is the standard no of line items in MIGO
And how to increase the line items
Is there any notes to apply
plz give sutable solution
K.Raghuram

Do you get message F5727 "Maximum number of items in FI reached"? reason is that in FI the posting line has a three-digit line item number (BSEG-BUZEI).
SAP's note 117708 provides a modification. I am pasting solution below.
Via the summarization you can post documents with more than 999 items in
FI.
The modification required for this is small, in addition you have to
change 2 tables. The modification is carried out in FI not in invoice
verification.
To activate document summarization in FI proceed as follows:
- The changes are described in Note 36353 and for the
modification in Note 77161. You may also have to apply Note
67640 so that the document summarization affects inventory
management.
An advice for the notes:
36353: Solution point 3: Field name WERKS
77161: Solution point 2: Maintain table TTYPV with Transaction
SE16
- this has the following effects; you can no longer clear the
GR/IR clearing account on purchase order item level (but only
on purchase order level) and you can only display the FI data
summarized (also see Note 36353)

How to split a line item to 2 line item.

Hi all !
I have a request, help me please !
In system I have a invoice with 1 line item value 1000 USD.
Customer payment 600$. a incoming payment with value 600$ will post to system.
I want incoming payment and invoice will auto clear 600$ but system can't auto clearing because value is not Identical.
I want line item of invoice will split to 2 line item. Line item 1 value 600$ and line item 2 value 400$.
Line item 1 of invoice will auto clear with incoming payment and system will exist a invoice with 1 line item value 400$.
How to split a line item to 2 line item ? Have FM for split a line item to 2 line item in SAP ?
If you have other solution for this request, help me please !
Thanks !

Hi,
Have a look at Split line item - Sales Order
Regards

Vendor Open Line Item Report

is there a report out there to display Vendor Open Line Items only for Asset Puchases??
Thank you

When you purchase an asset, How does your transaction look?
Like for example, when you use transaction code F-90 with vendor accounting entry will look like
31 (Credit Vendor) - 100USD - Account Type 'K' (Vendor)
70 (Debit Asset) - 100 USD - Account Type 'A' (Asset)
As you can see above, for my Vendor line item, the off-setting entry was done to a fixed asset which will have account type A. That is why I asked for entering account type "A" in your report to show up only those line items which have an offsetting entry to a fixed asset.
So, it depends on how your acquisition transaction looks like. There has to be something field that differentiates open items related to asset transactions with other regular transactions like document type, reference, etc... which you can use to isolate asset related open items.
Shail

How to Update multiple line Items in Sales order Interactive form

Hi,
I have created one online interactive form for sales order. In that I incorporated dynamic table logic .i.e. we can add row and delete row using buttons. Interactive form is working fine with one line item. But if I give multiple lines in table (line item) its creating sales order with single line item. So please help me how to pass multiple lines.
Thanks & Regards,
Krishna.

Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

Open Line Item Management in G/L Account

FI Experts,
Our previous consultant created all G/L accounts with Line Item Display not taking into account clearing accounts. Our problem is that we now can't run G/L reports because they time out due to the amount of Line Items as Open Items because we can't clear them to only Open Line Items. I tried checking the Open Line Item Display but it does not allow me because entries are already posted.
Question,
Can anyone advise what will be the best way to fix this? Do I have to create a new G/L account with corerct settings? and then transfer the line items from one account to another? if yes how can I transfer.
Any ideas will be appreciated.
Thank You,

I found some interesting info.
I did teh following:
1- I had ABAPer create a copy of program RFSEPA02
2- I blocked the account in FS00 at Company Level
3- Then I ran the Z version program copied by ABAPer
4- Entered the G/L account, ran it in teh background
5- After completed went back and unblock account to my surprise Open Item management was flagged

Restrict Number of Open line items selected for vendor payment in F-58

Dear Experts,
simply in F-58 i want the system to issue an error message if the user select more than 10 or maybe 15 open line items for payment, the reason is to make sure that the number of line items selcted will fitt in the From specified for printing.
is there a way to do so ?
i already got on but not sure how to use it.
please advice
Thanks and regards
Mohamed Talaat

hi,
my restricition is regarding the form that the key user want only one cheque paper to be prininted and the space for that can hold only like 10 or 15 line items so he just want to define this number and cant exceed it in one paymnet.
payment advice control i think can do this but am not sure its under t.code FBZP payment method in company code, haveyou try this before ?
and how come we design the form for multiplie pages andthen accomidate in one page ?
as they insert in the oprinter a seralized prinitng cheques paper sequincely.
please clarify
Regards
M.Talaat

Not able to clear an open line item using F-44

Hi Experts,
I am trying to clear open line items of a document using F-44. But I am getting message "No appropriate line item is contained in this document". The open line item document is available in BSIK table also. Please help me out here.
Regards
Amit kumar

- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question -
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
- Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
Note 136754
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
Rgds.

Help plz,how to activate open line item,which is already saved in fs00

Similar Messages

Maybe you are looking for