Help! Pop ups disabled but.. it doesnt work! :(
need some serious help guys. No matter which web browser i use, either safari or chrome, the pop ups KEEP COMING OUT. I have already disabled it in the system preferences, I have installed ClamXAV to run through my laptop(no results of any "infection"), but it just, DOESNT WORK. I didn't have this issue before, and its really annoying the shi* out of me. pop ups keep appearing no matter which website i go, or where i click. (alibaba, mac keeper, videos...) URGH.
PLEASE HELP!!!!
Click here and follow the instructions, or if desired, download and run Adware Medic. The second link is a direct download; if you're unable to download it, see this page.
ClamXav didn't detect anything because adware and viruses are different types of malware.
(116270)
Similar Messages
-
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points -
my ipod touch says its disabled, and i tried restoring it but it doesnt work what can i do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
my iphone 4 is frozen on the slide to unlock screen. ive tried the sleep/awake button home button but it doesnt work can someone help me
By the slide to unlock screen, are you talking about the slider at the bottom of the screen after taking out of sleep mode?
And by trying the sleep/wake button and home button, are you talking about a reboot by holding both the power/sleep button and the home button until the apple logo appears and it reboots? And that does not help release the issue with the slider?
Are you sure the iPhone is well charged?
If none if this helps, have you tried syncing/backing up to a compter and then restore by iTunes on a computer?
If you cannot do any of this it would be good to schedule a visit to an Apple store genius bar and have the techs try their hand and diagnostics. -
Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!
If you are sure that your password is correct try restarting your router by removing power to it for 30 seconds and restarting. On your iPod go to Settings > General > Reset > Reset network settings. Now try to connect.
-
my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you
Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H. -
Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.
iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
Thank you -
I bought a used sprint 4s and tried to put my motorola sim which is also on sprint network into phone but it doesnt work is there something i need to do to make it work or am i SOL? major problem is that my current motorola phone is issued to me from my employer but phone ***** so i want to upgrade to the ipone i purchased but it still needs to work like my company phone as they pay the bill. help me pls
A Sprint iPhone uses CDMA when in the US. The SIM is used only when not in the US.
To use it in the US, you have to have Sprint activate it, but it is unlikely they will activate in on your company's account. -
My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work, i have also searched for the usbappl or whatever it is and i cant find it, i have usbappl .dll but no .sys or .inf please help
All it is supposed to show up as in Windows is an image device.
If it's working fine in iTunes, what is the issue? -
I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this? I don't want it to delete everything from my phone or old computer.
hstarkeyy wrote:
I don't want it to delete everything from my phone or old computer.
You don't need to delete anything from your phone or you old computer.
Copy the entire /Music/iTunes/ folder from old computer or backup to /Music/ on new computer.
If you cannot use the old computer or don't have a backup...
-> Recovering your iTunes library from your iPod or iOS device
Then immediately make a backup of your new computer.
Get an external drive and plug it in and use -> Time Machine -
I have an htc evo shift 4g phone but i like to use the keyboard and the fn but it doesnt work
the fn button means that its the number button on the keyboard but it doesnt work on firefox beta mobile
Yes, I can confirm this problem in the released version. I don't know why apps would handle the hardware keyboard directly; seems Firefox Mobile should just receive the characters from the device. ??
-
the screen for my ipod touch went all white and I already tried to restarted but still doesnt work. What can i do?
Let the battery drain dead, recharge it and test. If it still does not work, restore.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I can't send messeges with my ipad, always appear a box asking me to sign in, but it doesnt work, what can I do?
Are you talking about iMessages or email?
Maybe you are looking for
-
Can only see first and last frame of clip in the timeline HELP PLEASE
Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is
-
Creating a task field list in c# project
Hi All, I am writing a small application to simply my monthly forecasting and reporting. I'm extracting data from my msProject file into a c# application with a local database. I want the user to be able to select which task data fields to extract
-
Hi experts, I am having the export dump for the whole database but i have to import into another database without any data in the tables... can any one guide me
-
Issue in adapters mapping in OIM 11g
Hi, I am having the issue in adapters mapping in OIM 11g..... I had created an Entity Adapter using utility task in OIM... and I had attached it to post update of users form in data object manager.... But when I am trying to map the adapter variables
-
Government websites are untrusted now?
The situation with the untrusted websites error message is getting ridiculous. I am using a computer in a library today. hundreds of people a day use the computers here. This is not just a problem manifesting on one individual's personal computer at