Help--printing issue driving me crazy

Hi, I am hoping someone can help me. I have images that I created in Photoshop at 300dpi, that seem to "all of a sudden" be printing on my HP laser priner in "dots", almost looks like what a dot matrix printer used to print. Yet when I print something from the internet it comes out fine. Why would something from Photoshop print this bad and from the web it prints ok? Thanks much for your help!

Try re booting the handset by removing the battery.
Also look in the menu to see if he has changed the settings.
If all else fails action a factory reset backing up naything you want to keep.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Similar Messages

My i tunes is skipping like a scratched cd-help please its driving me crazy..

my i tunes is skipping like a scratched cd….please help it is driving me crazy...

If no change after restoring with iTunes as a new iPhone or not from your iPhone's backup, more than likely your iPhone has a hardware problem. You can make an appointment at an Apple store if there is one nearby.

TS3899 I cannot select an email to delete on my IPhone 5. When I hit edit then check the email i wish to delete it unchecked itself. Help it is driving me crazy. I tried deleting the email account and re-adding it but it didn't work.

I cannot select an email to delete on my IPhone 5. When I hit edit then check the email i wish to delete it unchecked itself. Help it is driving me crazy. I tried deleting the email account and re-adding it but it didn't work.

Sorry if I confused you. Let me try again:
1) do a full backup your iPhone to a PC using iTunes
2) go to: settings, general, reset, erase all content and settings.erase phone.
3) when iPhone starts again choose set as new phone. Do not restore from icloud or iTunes.
4) once done. Setup your email accounts. When done, verify checked emails do not uncheck themselves.
That resolved, finish setting up:
5) go to: settings, icloud, uncheck email, and set other icons as wished. Now setup icloud account.
6)This step will make all contracts reside in icloud and be available always: Once icloud account is setup, go back to settings, email contacts. Open each email account and uncheck contacts, but leave mail checked. Then go to the icloud email account and check contacts.

Curve issues driving me crazy!!

Ok, so I bought my BB Curve in January, and at first I loved it!
A few days ago though it began going crazy. Everytime I try to open something I get that annoying clock thing, and then once I finally get the program open, it stays. This happens during phone calls (so it is rediculous trying to answer and end calls) writing texts and email - anything.
Then I added in the battery issue - my phone will die within 6 hours, even if I am not doing anything different.
And now...the last few nights the screen has gone white with a weird meesage on it (something like APP ERROR I think...)
I got a new SIM card, and that fixed it for about 6 hours.
This is driving me crazy! i take my battery out so many times during the day it is almost not worth having a phone!
Please please please help!

I have the Curve 8130 - my carrier is ATT & for about the last mth it has been sluggish. The hourglass keeps popping up like something is running in the background. I have not loaded any new apps recently & it does starighten out after I pop the battery, but that's getting old pretty quick. Fortunately, I'm not having battery issues - but it is a nuisance to keep fighting with that **bleep** hourglass. Anybody else out there having the same issues or are we just the lucky ones???
Looks like 2 different carriers here, so I don't think it's an ATT thing. Is Blackberry doing something or upgrading something that maybe we're not aware of? I never had an issue with my Curve before - but this last month has been really aggravating. I'm sure we can't be the only 2 people having these issues. Help!!!

How do I stop the constant stars coming out of the firefox symbol - please help - they are driving me crazy

''locking this thread as the Owner of this thread answered in the related thread''
starting today when I clicked on firefox on my mac, there are blue stars constantly coming out of the firefox symbol and they are annoying and driving me crazy. How do I stop the constant stars coming from the firefox symbol? please help

You can use these steps to disable the snippets on the about:home page:
* Set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page
* Open about:home page in a tab
* Open Web Console in this tab (Firefox menu button or Tools > Developer)
* Run this command via the command prompt: gSnippetsMap.clear()
* Close the tab with the about:home page
* Close and restart Firefox

HT3951 I purchased a movie and it downloaded to my computer but it is not on my ipod and it will not sync manually. It showes upin my purchased list on ipod but not in my videos. HELP THIS IS DRIVING ME CRAZY

I purchased a movie and it downloaded to my computer but it is not on my Ipod touch. It will not sync manually, I've tried. It shows up on my ipod as purchased but it is not in my videos. When I go to the movie from purchases it says DOW in the corner.HELP THIS IS DRIVING ME CRAZY

Hello,
If you have an iPod Touch you can watch movies on it.
Did you sync the movie with iTunes between your computer and your iPod ?
Connect iPod touch to a USB 2.0 port on your Mac or PC using the included cable.
Follow the onscreen instructions in iTunes to set up iPod touch and sync your music, video, photos, and other content.
Your computer must be connected to the Internet.
By default, iTunes automatically syncs all songs and videos in your iTunes library to iPod touch. If you have more content in your library than will fit on iPod touch, iTunes alerts you that it can’t sync your content. You’ll need to use iTunes to select some of your songs, videos, and other content to sync.

LabelStudio 7.09.02 Font issue driving me crazy

I don't know what to do. My tray/pallet tags are not formatting the barcodes correctly. This note at the end of the release notes is not helping me, "If you are using the PCL driver, note that PCL fonts included with Label Studio have been updated. If you generated any PCL fonts based on the Label Studio PCL fonts, regenerate them again after installing 7.90c.02.00."
From what I can tell regarding my font installations, they were purchased from ID Automation. I don't know what I need to replace what I have. I don't know where to start looking. Your assistance would be appreciated.
dvn

Hopefully I can clear up some of the confusion on how the fonts and barcodes in Label Studio work.
In general, the barcodes within Label Studio are just fonts but instead of requiring the user to select the font and then tweak the various font properties to get the output correct we encapsulate it within a barcode object that can be dropped on the label. That way we can also ensure that the barcode is printing out at the proper dimensions to obtain a valid barcode.
Each barcode is set to point to a specific font and that is something that is set within the code and a user is unable to change. With the 7.90c.01.00 release the program was set to use the barcode fonts that begin with "IDAutomation". Because of issues with those fonts 7.90c.02.00 changed to use the fonts that begin with "SAP" so 7.90c.02.00 will not reference any of the u201CIDAutomationu201D fonts.
When using a Windows printer driver the program uses the fonts installed within the Windows/Fonts folder. If using PCL it doesnu2019t use those fonts and instead uses the special PCL fonts which are a binary representation of a specific font and font attributes (size, bold/italic/underline, DPI). The PCL name can be decoded to tell you what each specific file contains. For example you mention u201CSAPI25L-170-1-300-PCL.fntu201D. The first part tells the font name which is u201CSAP125Lu201D. The second part of the name is the font size with 170 equating to a 17 point font. The third position is whether the font is bold/italic/underlined with a value of 1 being regular (all barcodes will be a 1). The fourth position tells the DPI which in this case is 300 DPI (the only other option is 600 DPI). The last part is the type of data stream which for now will always be PCL. The PCL fonts are generated from the Windows fonts (from within Label Studio by selecting the menu option u201CTools > Create Data Stream Fontsu2026u201D but by default we install all PCL fonts needed to use the default PCL designs that we ship.
From your posting I didnu2019t get where the u201CSAPu201D fonts are showing up. Are they showing up under the Windows/Fonts directory? Are they showing up within the Label Studio PCL font directory? Do they show up within the font drop down within Label Toolbox?
Is this a problem when previewing, printing, or both?

Gradient issue driving me crazy

Hi Everyone,
I am having a huge issue with Photoshop CS5.5. The gradients and colors are acting crazy. When I bring in a image with a gradient it gets black spots all in the dark areas. Even when I use the default gradient selection this is what happens. When I bring in a picture that should have a white background it turns to black. Now apparently, when I save it out as a JPEG saves correctly without the black line or messed up gradients. So it seems to only be an issue when I am working in Photoshop, the gradients appear messed up. Any idea of what is wrong with my display?
Any help would be appreciated,
Thanks
Better example of a before and after pic:

Looks like a known problem with some AMD/ATI video drivers where pixels with red==0 are displayed as black in Photoshop. If so, a solution is to use Catalyst 13.2 beta 7 or Catalyst 12.8.
http://support.amd.com/us/kbarticles/Pages/AMDCatalyst132BetaDriver.aspx

Please help, this is driving me crazy

I bought a new song just to use as a ring tone on my iphone and it wont let me create it.
I made sure i'm signed in, have the view ringtone setting enabled, and
have the latest version of itunes.
the error i get is " This song cannot be made into a ringtone
nothing hurts by various artists can no longer be made into a ringtone" and this happened with any song i purchase from itunes

pls consider stating the actual specific issue in the Title of your post - people tend NOT to take the time to read a post that says 'Has this happened to you?' or the like - so your more likely to be viewed if you be more specific. Generic 'help, how do you fix this?' type titles are getting old for the rest of us as well. Thanks.

Please help Applescript is driving me crazy - wants to send message.

Hi,
How do I get rid of this?
I have never used applescript to my knowledge. Since yesterday afternoon every few minutes I get message that applescript is attempting to send a message then it goes one about how you need to be careful and trust the source because it it may contain a harmful virus etc. Do you want to send message? i have hit cancel and send a number of times but it keeps coming back. I use entourage for mail. I looked at the error and says it can't send from my email.
My email seems fine though. I am getting and receiving messages.
Thank you for your help.

pls consider stating the actual specific issue in the Title of your post - people tend NOT to take the time to read a post that says 'Has this happened to you?' or the like - so your more likely to be viewed if you be more specific. Generic 'help, how do you fix this?' type titles are getting old for the rest of us as well. Thanks.

Possible internet routing issues driving me crazy!

I've somehow hit a problem accessing a particular favourite website and it seems I may have a routing issue.
I've spoken with a friend who is fairly network savvy and he's suggested I raise a case \ complaint with BT. I thought I'd use this forum to test if I'm missing something I could be doing to fix it before logging a problem with BT Helpdesk!
I've a BT Homehub 2 (Current firmware 4.7.5.1.83.3.5 (Type B) and I can access pretty much all websites I care to look at without any issue at all, however the site I read most days is now no longer viewable on any of my 2 PC's nor my iPhone. When I try to access it I get no error messages at all just a blank white page.
Doesn't matter if I try using IE or Firefox or Chrome browers it's the same result - I just see a blank white page.
The site in question www.celticquicknews.co.uk (or www.celticquicknews.com) and is definitely available, as I can access it when using a site such as http://www.free-internet-organization.tk/ on both my PC's and iphone so I know the web site is up and running and available for browsing but since Thursday lunchtime I've had no joy in being to access that particular site directly wihout resorting to using another middleman site to let me view it.
I have tweeted the guy who hosts the www.celticquicknews.co.uk site and he's said his site is fine but has numerous similar queries around BTINTERNET folks having the same issue as I'm reporting.
I run McAfee Internet Security and having disabled the various firewall \secure browsing functions no improvement still no joy.
I did successfully somehow connect directy to the illusive web site this morning (Sunday 1st May) on my iphone at around 10am, but by the time I boiled the kettle to have a coffeee and sit and read the site it became inaccessable again on my iphone and both my PC's! So what's going on?
www.celticquicknews.co.uk [217.174.253.143]
www.celticquicknews.com [217.174.253.143]
Homehub TCP\IP info is as below which I suspect is of value to the more techincal on the forum:
Broadband network IP address 109.152.154.29
Default gateway 217.32.142.102
Primary DNS 194.72.0.114
Secondary DNS 62.6.40.162
ADSL line status
Connection Information
Line state Connected
Connection time 0 days, 01:11:16
Downstream 15,978 Kbps
Upstream 1,144 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.5 Annex A
Latency type Interleaved
Noise margin (Down/Up) 5.2 dB / 6.0 dB
Line attenuation (Down/Up) 31.0 dB / 13.8 dB
Output power (Down/Up) 23.6 dBm / 1.7 dBm
C:\>tracert -d 217.174.253.143
Tracing route to 217.174.253.143 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.1.254
2 15 ms 15 ms 15 ms 217.32.142.102
3 18 ms 17 ms 16 ms 217.32.142.142
4 22 ms 22 ms 21 ms 213.120.163.26
5 22 ms 20 ms 21 ms 217.32.27.30
6 21 ms 21 ms 21 ms 217.32.27.178
7 22 ms 21 ms 21 ms 109.159.250.78
8 33 ms 35 ms 35 ms 109.159.250.13
9 28 ms 28 ms 29 ms 62.172.102.1
10 29 ms 28 ms 28 ms 195.66.224.98
11 33 ms 34 ms 33 ms 88.208.255.61
12 38 ms 32 ms 33 ms 88.208.255.102
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
C:\>
I've reset my HH several times over the weekend and am baffled as to how I can somehow have 1 site excluded from my browsing options for no obvious reason other than a suspected internet routing issue.
My iPhone is on ORANGE and when disabling the wireless connection it too is unable to view the site in question so it's a real pain!
Not sure where to go to progress this so any help \ guidance is very much appreciated.......
Solved!
Go to Solution.

Appreciate the help....been out for most of the day and checked in to see if any additional posts.
I tried pinging the site and it does seem to resolve OK and also tried accessing site via IP but same issue - blank white page.
>ping www.celticquicknews.co.uk
Pinging www.celticquicknews.co.uk [217.174.253.143] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Then tried the telnet command "telnet 217.174.253.143 80" and I do not get any errors and as suggested the command prompt goes blank but no matter what I type I get no errors or response from server 217.174.253.143.
My IP address has changed from this morning and sadly still same issue for me.
Internet connection configuration
Connection Information
Connection time
0 days, 10:05:37
Data Transmitted/Received (MB)
10.8 / 29.4
Broadband username
[email protected]
Password
Not configured
TCP/IP settings
Broadband network IP address
86.147.168.198
Default gateway
217.32.142.102
Primary DNS
194.72.0.114
Secondary DNS
62.6.40.162
The tracert comments make sense so that's helped me understand, thanks for checking that out.
So what's the best option for me? Am I wasting BT and my own time logging a case?
I'd not usually bother pursuing this for the sake of a single web site but I'm bemused how this has happened since last week?
Thanks again for all help and guidance.
PJ

Apple TV Syncing Issues Driving Me Crazy!

Hi All :o)
I've had my ATV from launch and it has hardly had any problems at all but since the latest software update and the latest Time Capsule update i have had nothing but trouble at least two to three times a week my ATV forgets all and has to re-sync everything its now to the stage where i cant be bothered to use it?
My question is has anyone with this set up found this issue? and does anyone know if apple is AWARE of this issue?
Any one with any ideas would be a great help cheers all :o)

Hello, I have had both the ATV and Time Capsule running and done all the updates whenever they came out and have never had that happen, except when I accidentally unchecked 'all' in iTunes and it had to re-synch, but that was me clicking things I wasn't aware of. So sorry, can't help, it works for me.

URGENT help , getBundle is driving me crazy!!

Ok here is part of code (JSP tag)source code:
<<<<code start>>>>
package com.ibm.helpnow.tags;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
import javax.servlet.http.*;
import java.util.Locale;
import java.util.ResourceBundle;
public class NLSsetLang extends TagSupport{
 private String name;
 public void setName(String n){
 this.name = n;
 public int doStartTag() throws JspException {
 //Locale l = pageContext.getRequest().getLocale();
 Locale l = new Locale("en", "US");
 ResourceBundle bundle = ResourceBundle.getBundle(name,l);
<<< code snippet ends>>>>>>>
<<<<error begins>>>>>>>>
above last line couses couses following error:
javax.servlet.jsp.jspException = java.util.MissingResourceException: Can't find bundle for base name textfile, locale en_US
[Servlet.Engine.Transports:10] [Wed May 14 16:39:12 EDT 2003] Parameter & its value in the request object:
[5/14/03 16:39:12:789 EDT] 40e03521 SystemOut U [Servlet.Engine.Transports:10]java.lang.IllegalStateException: ERROR: Cannot forward. The response has already been committed.
[5/14/03 16:39:12:799 EDT] 40e03521 WebGroup X Servlet Error: ERROR: Cannot forward. The response has already been committed.: java.lang.IllegalStateException: ERROR: Cannot forward. The response has already been committed.
 at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:97)
 at com.ibm.aurora.AuroraServlet.HandleGenericException(AuroraServlet.java:454)
 at com.ibm.aurora.AuroraServlet.HandleRequest(AuroraServlet.java:567)
 at com.ibm.aurora.AuroraServlet.doGet(AuroraServlet.java:305)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.ibm.servlet.engine.webapp.StrictServletInstance.doService(ServletManager.java:827)
 at com.ibm.servlet.engine.webapp.StrictLifecycleServlet._service(StrictLifecycleServlet.java:167)
 at com.ibm.servlet.engine.webapp.IdleServletState.service(StrictLifecycleServlet.java:297)
 at com.ibm.servlet.engine.webapp.StrictLifecycleServlet.service(StrictLifecycleServlet.java:110)
 at com.ibm.servlet.engine.webapp.ServletInstance.service(ServletManager.java:472)
 at com.ibm.servlet.engine.webapp.ValidServletReferenceState.dispatch(ServletManager.java:1012)
 at com.ibm.servlet.engine.webapp.ServletInstanceReference.dispatch(ServletManager.java:913)
 at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:678)
 at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:331)
 at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:117)
 at com.ibm.servlet.engine.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
 at com.ibm.servlet.engine.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:239)
 at com.ibm.servlet.engine.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:67)
 at com.ibm.servlet.engine.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:151)
 at com.ibm.servlet.engine.oselistener.OSEListenerDispatcher.service(OSEListener.java:315)
 at com.ibm.servlet.engine.http11.HttpConnection.handleRequest(HttpConnection.java:60)
 at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:323)
 at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:252)
 at com.ibm.ws.util.CachedThread.run(ThreadPool.java:137)
<<< end error>>>
At first I thought it might be claspath problem, but it is not ( it seems)....so if anyone has any ideas I apprecaiate any help:)
Am i doing something wrong with trying to get the bundle?
HELP! please:)

Do you have NLSsetLangBundle_en_US.properties in corresponding directory?
Vassili Nikolaev

SlideToggle issue driving me crazy!!

Hi,
I'm having real trouble with slideToggle on my button called videos in my edge project. from what i can see the code is exactly the same as the other buttons but will not reveal!
Any ideas???
project attached here:
Dropbox - PUBLISH.zip
thanks!

Seems to be a problem with ,err letter capitalization
In the videosbutton click listener,last function call is
sym.getsymbol("Contentcontent").$("videos").slideToggle();
If should be
sym.getSymbol("Contentcontent").$("videos").slideToggle();
's' is for getSymbol is small in your composition make it caps

My sound card skips on the A105-S4021. Please Help, it is driving me crazy.

I have tried updating my driver, which did not work. Whenever I move the mouse around the sound begins to skip or come to a halt.
My memory is:
Total Physical Memory 2,048.00 MB
Available Physical Memory 1.26 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
I have 73 processes running and no other applications currently.
Thank you
Scott

Satellite A105-S4021
What happens after a clean boot?
How to configure Windows XP to start in a "clean boot" state
-Jerry

Help--printing issue driving me crazy

Similar Messages

Maybe you are looking for