HELP! problem in transformation

For instance, there are some records in data table. but i only can get one record (the first of all data from table) after transforming these records to xml file.how to transform all records in data table to xml file and make each record be placed in one statement in xml file?thank you!
id name
1 aa
2 bb
=============> <id>1</id>
<name>aa</name>
<id>2</id>
<name>bb</name>
Message was edited by:
jamespro1981

You will need to use the xsl:for-each element in the xsl for every row that is retrieve fromthe database table.

Similar Messages

  • Problem with transforming coordinate systems

    Hiho,
    i've got a problem with transforming coordinate systems.
    When I'm trying to transform a sdo_geometry object to another coordinate sytem and then back to the old system, the coordinates are not the same.
    Here's an example:
    StartSystem SRID is 8220 (Longitude / Latitude (DHDN))
    TargetSystem SRID is 8307 (Longitude / Latitude (WGS84))
    Original object:
    Polygon: {ExteriorRing: LineString: { (0.0, -90.0) (1.5, 0.0) (0.0, 90.0) (4.5, 0.0) (0.0, -90.0)} }
    Transformed object:
    Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (85.94366926962347, 0.0) (0.0, 5156.620156177403) (257.8310078088704, 0.0) (0.0, -5156.620156177403)} }
    Transformed back to old system:
    Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (4924.209525017614, 0.0) (0.0, 5156.620156177403) (14772.628575052844, 0.0) (0.0, -5156.620156177403)} }
    Any ideas what to do?
    Thanks for the help in advance.
    Dirk

    Hi Dirk
    Since the transform you are trying to do is just a datum conversion of lat./long. coordinates, even the first transform yields obvious rubbish. What you have provided here does not illustrate how you submitted your polygon to CS_TRANSFORM.
    Provide the syntax of your construction of the corresponding SDO_GEOMETRY object and your SQL select statement that gave these results.
    Bruce

  • Problems with transformation; infoobject not updated in DSO.

    Hi all,
    We are having some problems with one of our transformations between PSA and DSO.
    Suddenly some of the fields are not filled in the DSO. The mapping for field Sales order number worked fine, and then I added an infoObject in the DSO to hold the info for Sales order item. I also replaced the infoobject that was supposed to hold the sales order number. After this, none of the two fields has any data in DSO. I checked the PSA, and the data is available here. I tested the rule in ‘Rule details’ and for sales order number it gives the correct result, but for sales order item it gives a runtime error; assertion failed. I checked on SAP Notes, and found 929934. But the corrections are already added in our system.
    Has anyone got any ideas on what to do?
    BR,
    Linda

    Hi,
    There are a number of problems in Transformation when either a source field or target field is changed.
    This can lead to inconsistent transformation.
    You can raise a message to SAP or best thing is if possible delete the Transformation and create a new one.
    Regards,
    Nitin

  • Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

    please help problem with importing a file error output "there was an error decompressing audio or video"

    this is related to what adobe program/version?

  • Post Moved BT Broadband Desktop help problem

    Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/BT-Broadband-Desktop-Help-problem/td-p/46973
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Hi FrankC
    I am sorry this still a problem.
    If you could drop me an email please with your BT account and telephone number along with a link back to this thread I'll get this sorted out for you.
    Just send to the address in my profile. 
    With regards to the thread being marked as solved as the original poster you can unmark the thread as solved.  Just select 'Options' at the top right of the post.  KerryG has posted up a pretty useful guide on this here. 
    Cheers
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Problems during Transformation using Xalan

    Hi,
    i'm using Xalan 2.6.0 to transform xml and xsl into HTML.
    This works fine but i get errors during Transformation but the HTML File is build.
    The Error is:
    [Error] version.xsl:9:80: Element type "xsl:stylesheet" must be declared.
    [Error] version.xsl:11:33: Element type "xsl:include" must be declared.
    [Error] version.xsl:20:3: Element type "xsl:output" must be declared.
    [Error] version.xsl:21:25: Element type "xsl:template" must be declared.
    [Error] version.xsl:22:7: Element type "html" must be declared.
    [Error] version.xsl:23:34: Element type "xsl:call-template" must be declared.
    [Error] version.xsl:24:79: Element type "xsl:with-param" must be declared.
    [Error] version.xsl:26:7: Element type "body" must be declared.
    [Error] version.xsl:27:83: Element type "table" must be declared.
    [Error] version.xsl:28:7: Element type "tr" must be declared.
    [Error] version.xsl:29:34: Element type "th" must be declared.
    [Error] version.xsl:32:64: Element type "table" must be declared.
    [Error] version.xsl:33:7: Element type "tr" must be declared.
    . and so on
    The header of the XSL File looks like:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <!DOCTYPE xsl:stylesheet [
    <!ENTITY amp "&#038;">
    <!ENTITY nbsp "&#160;">
    <!ENTITY uuml "&#252;">
    <!ENTITY Auml "&#196;">
    ]>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
    <xsl:include href="global.xsl"/>
    <!-- Template f�r root Element-->
    <xsl:output
    method="html"
    doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"
    encoding="ISO-8859-1"
    version="4.01"
    indent="yes"
    />
    <xsl:template match="/">
    Can somebody help me with this problem ?
    Thanks.
    Jens

    When I remove the DOCTYPE it works but is this a Xalan Problem or is the using of a doctype declaration in a XSL Document generally forbidden ?
    Because without Doctype i cant use characters such as "�", "�", and so on.

  • Problem in transformation

    Hi Gurus
    I am working on BI 7.0 and when I create transformation I have the following message.
    R<b>ule 5 (target: Z_REV): Target parameter 0008 is not being used</b>
    <b>Rule (target field: Z_REV): No source field assigned</b>
    <b>Rule 7 (target: Z_MPRICE): Target parameter 0010 is not being used</b>
    <b>Rule (target field: Z_MPRICE): No source field assigned</b>
    I have already created datasource but when I try to create transformation to load the data to cube from datasource ( just for testing ) all the CHAR are getting assigned correctly but when i try to assign key fig I am getting this errors.I am assigning the fields then also its giving me this errors.
    is this a basis problem or some other issue?
    pl help

    hi..
    chk this thread..
    Re: No Record Mode Mapping
    hope it helps..

  • Problem when transform command is invoked in a dialog

    Hi friends
    I´m having a problem with the script UI. I tried various things to correct but I´m not able to get sucess.
    The code in the script is correct. The problem is: when I run the script and click the "execute" button...Photoshop would need to execute the "Transform" function it is called and would allow me to freely transform the selected layer.
    BUT...it does not allow me to drag the axis of bounding boxes to transform. This is because Photoshop is understanding my dialog box UI is still active, ---even calling dlg.close()--- (and I cannot transform since a dialog box is active).
    See it:
    function transform(){
    var desc = new ActionDescriptor();
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    desc.putReference( charIDToTypeID('null'), ref );
    desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
    var desc2 = new ActionDescriptor();
    desc2.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Rlt'), 0.000000 );
    desc2.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Rlt'), 0.000000 );
    desc.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), desc2 );
    desc.putUnitDouble( charIDToTypeID('Hght'), charIDToTypeID('#Prc'), 100.001);
    try{ executeAction( charIDToTypeID('Trnf'), desc, DialogModes.ALL ); }catch(e){};
    var dlg = new Window ("dialog", "Processamento de imagens v10", [0,0,0,0])
    dlg.size = [120,120]
    dlg.center ()
    var run = dlg.add ("button", [0,0,0,0], "Executar")
    run.size = [80,30]
    run.location = [30,40]
    run.onClick = function (){
        dlg.close()
        var doc = app.activeDocument
        var layer = doc.activeLayer
        layer.isBackgroundLayer = false
        transform()
    dlg.show()
    What Am I missing?
    Photoshop does not accept Window of type ("palette") so I do not know how to handle it
    Thank you for the help
    Best Regards
    Gustavo.

    You can not have more than one modal dialogs running at once. The scriptUI dialog is modal and so is your transform function. All you can do for this example is move the transform line to after the dlg.show(); line.
    Photoshop does have a 'palette' window but because it is non-modal it is really only useful for progressbars or other 'please wait' messages. For the example you posted if it were a palette the script would not stop at dlg.show() and wait for the user to do something. It would try to run the next line and, not finding one, end. At best you would only see the window flash before the script finished.

  • Help on Call Transformation

    Hi
    i have created a RFC and thru that i am submitting a report and calling that RFC in my EP.
    i make use of the FM "WWW_HTML_TO_LISTOBJECT" so that data mirror image of my report is also displayed in my portal.
    But the problem is i can't control it, For eg: if i click on "download to excel" it isnt working properly.
    how should i overcome this problem.
    Once Mr.Raja (one of the sdn member) suggested to use
    "call transformation" method, can you be specific to that, how should i use that in ALV report. where should i write "call transoformation" method. A sample code would be helpful.
    Thank you

    <b>Call Transformation</b>
    is for transforming XML using XSLT into a xml/html/abap itab, etc formats.
    of transforming abap itab to xml format.
    you cannot convert the html returned by your program into your required format using this mechanism.
    if you want to use this feature , then your report should be returning XML output.
    possible tranformation scenarios
    from XML to XML (only for XSLT),
    from XML to ABAP (for XSLT and simple transformations),
    from ABAP to XML (for XSLT and simple transformations),
    from ABAP to ABAP (only for XSLT),
    Regards
    Raja

  • Query help - problems with ROLLUP

    I'm trying to make a query i can use for an alert, it generates sales for the past 7 days.
    This query works fine:
    SELECT
          CASE WHEN GROUPING(T0.[CardCode]) = 0
                THEN CAST (T0.[CardCode] AS CHAR(8))
                ELSE 'ALL'
          END AS Customer#,
          SUM(T0.[Max1099]) AS "Total Sales",
          SUM(T0.[GrosProfit]) AS "Gross Profit" 
    FROM OINV T0
    WHERE T0.[DocDate] >= DATEADD(dd,DATEDIFF(dd,0,GETDATE())-7,0) AND T0.[Max1099] > 0
    GROUP BY T0.[CardCode] WITH ROLLUP
    And it gives me this:
    #     Customer#*     Total Sales*     Gross Profit*     
    1     C2235              8,285.87       4,165.77            
    2     C2236           10,191.39              4,197.95            
    3     C2253                570.56               311.17          
    4     C3008           18,756.76       5,720.21            
    5     ALL                   37,804.58    14,395.10            
    Which is great. Gives me a total at the end, and substitutes "ALL" for the customer number. Lovely.
    Problem #1: I REALLY want it to give the Customer Name NEXT TO the Customer Number. But when I try to add it, i have to add it to the GROUP BY as well. Which changes the query to this:
    SELECT
          CASE WHEN GROUPING(T0.[CardCode]) = 0
                THEN CAST (T0.[CardCode] AS CHAR(8))
                ELSE 'ALL'
          END AS Customer#,    
          CardName as "Cust Name",     
          SUM(T0.[Max1099]) AS "Total Sales",
          SUM(T0.[GrosProfit]) AS "Gross Profit"
    FROM OINV T0
    WHERE T0.[DocDate] >= DATEADD(dd,DATEDIFF(dd,0,GETDATE())-7,0) AND T0.[Max1099] > 0
    GROUP BY T0.[CardCode], T0.[CardName] WITH ROLLUP
    And changes my output to THIS:
    #     Customer#     Cust Name                             Total Sales     Gross Profit     
    1     C2235             Acme Products                      8,285.87               4,165.77     
    2     C2235          (blanks blanks)                        8,285.87               4,165.77     
    3     C2236             Some Other Products             10,191.39               4,197.95     
    4     C2236          (blanks blanks blanks)            10,191.39               4,197.95     
    5     C2253             Third Customer Name             570.56                  311.17     
    6     C2253          (blanks blanks blanks)                570.56                  311.17     
    7     C3008             Fourth Customer Name       18,756.76       5,720.21     
    8     C3008          (blanks blanks blanks)                                               18,756.76       5,720.21     
    9     ALL                                                                  37,804.58     14,395.10     
    ( I have replaced actual customer names, of course, and replaces actual blanks with the word 'blanks' so it would be more legible.)
    I can't figure out a way to simply list the customer name next to the number. Instead , it gives me a summary for the CardCode and a summary for the CardName.
    I've tried combining the two into one field, on the fly, but haven't been successful.
    Problem #2 - extra credit!
    If i really want this done right, i should also have a query that pulls the same data from ORIN (Credit Memos) and do a UNION ALL, but when i do this, is simply rejects me at the word "UNION"
    any and all help appreciated, and to test this, you can just cut and past the query into SAP, it will run right there, no mods needed.
    oops. I had to change the "Not Equal" symbol to just "greater than" for "Max1099" because it was just dropping the symbol...
    Edited by: Dante Amodeo on Jan 18, 2012 6:30 PM

    Try:
    SELECT CAST (T0.CardCode AS CHAR(8)) AS Customer#,
    MAX(T0.CardName) 'Customer Name',
    SUM(T0.Max1099) AS 'Total Sales',
    SUM(T0.GrosProfit) AS 'Gross Profit'
    FROM OINV T0
    WHERE DATEDIFF(dd,T0.DocDate,GETDATE())<=7 AND T0.Max1099 > 0
    GROUP BY T0.CardCode
    UNION ALL
    SELECT 'ALL','',SUM(T0.Max1099),
    SUM(T0.GrosProfit)
    FROM OINV T0
    WHERE DATEDIFF(dd,T0.DocDate,GETDATE())<=7 AND T0.Max1099 > 0

  • , please help problem downloading apps since update

    Why can't i download apps since i updated to i06, i  log in with password .am then asked for three security questions fill this out click done and get the answer timed out try again, what is causing this please help.

    Settings>General>Reset (at the far bottom)>Reset All Settings
    That will ALWAYS work for the "3 Security Questions - Timed Out problem".  No data will be lost, but your network settings will be reset.

  • [HELP] Problem with restore and recovery to new host

    Hi, guys!
    I have been trying for two days, but still cannot get it to work.
    I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
    Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
    Could anyone help me out here? Any advice would be appreciated!
    RMAN> restore database until sequence 10 thread 1;
    Starting restore at 08-NOV-11
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting datafile backupset restore
    channel ORA_DISK_1: specifying datafile(s) to restore from backup set
    restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
    restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
    restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
    restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
    restoring datafile 00005 to D:\ORA_DATADATA01.DBF
    restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
    restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
    restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
    channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
    OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
    P
    failover to previous backup
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 11/08/2011 11:41:33
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    Here is some extra information that you might want to know about:
    RMAN> list incarnation;
    List of Database Incarnations
    DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
    1 1 PRODDB 3774691295 PARENT 1 17-APR-07
    2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
    3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
    4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
    5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
    6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
    RMAN> list backup recoverable;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    37 Full 822.34M DISK 00:29:47 07-NOV-11
    BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
    Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
    2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
    List of Datafiles in backup set 37
    File LV Type Ckp SCN Ckp Time Name
    1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
    2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
    3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
    4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
    5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
    6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
    7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
    8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    38 Full 6.95M DISK 00:00:03 07-NOV-11
    BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
    Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
    \2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
    Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
    SPFILE Included: Modification time: 07-NOV-11
    BS Key Size Device Type Elapsed Time Completion Time
    39 18.46M DISK 00:00:05 08-NOV-11
    BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
    Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
    2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
    List of Archived Logs in backup set 39
    Thrd Seq Low SCN Low Time Next SCN Next Time
    1 1 2146951 07-NOV-11 2149493 07-NOV-11
    1 2 2149493 07-NOV-11 2149519 07-NOV-11
    1 3 2149519 07-NOV-11 2149565 07-NOV-11
    1 4 2149565 07-NOV-11 2149641 07-NOV-11
    1 5 2149641 07-NOV-11 2172859 07-NOV-11
    1 6 2172859 07-NOV-11 2197851 07-NOV-11
    1 7 2197851 07-NOV-11 2220349 08-NOV-11
    1 8 2220349 08-NOV-11 2222621 08-NOV-11
    1 9 2222621 08-NOV-11 2222729 08-NOV-11
    1 10 2222729 08-NOV-11 2223088 08-NOV-11
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    40 Full 6.95M DISK 00:00:00 08-NOV-11
    BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
    Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
    \2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
    Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
    SPFILE Included: Modification time: 08-NOV-11
    Thanks in advance!
    Jay

    Thank you for your reply,Hemant K Chitale!
    >
    a) Does the directory structur exist on the new server :
    D:\DBDATA\PRODDB\ --- for files 1 to 4
    D:\ --- for file 5
    D:\ORA_DATA\ --- for files 6 to 8
    >
    Yep, I have doubled check the directory structure that get in the way, and they are all exist.
    Would it be something to do with the folder permissions?
    >
    b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
    >
    I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
    >
    (I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
    >
    Yep, that's exactly what I did.
    //executed @ RMAN prompt of the new host
    startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
    restore controlfile from autobackup;
    alter database mount;
    restore  database sequence 10 thread 1;
    //get stucked here with RMAN-06026, 06023
    //...the following is not executed yet.... :-(
    recover database until sequence 10;
    alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
    I have made several attemps with your advice, but still get the same type of errors.
    Here is the output:
    RMAN> list backup of controlfile;
    List of Backup Sets
    ===================
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    38 Full 6.95M DISK 00:00:03 07-NOV-11
    BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
    Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
    \2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
    Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
    BS Key Type LV Size Device Type Elapsed Time Completion Time
    40 Full 6.95M DISK 00:00:00 08-NOV-11
    BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
    Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
    +\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
    Control File Included: Ckp SCN: 2223097      Ckp time: 08-NOV-11
    as you suggested, this backup piece of controlfile should be right one to be restored.
    RMAN> shutdown;
    database dismounted
    Oracle instance shut down
    RMAN> startup nomount;
    connected to target database (not started)
    Oracle instance started
    Total System Global Area 490733568 bytes
    Fixed Size 1291360 bytes
    Variable Size 364907424 bytes
    Database Buffers 121634816 bytes
    Redo Buffers 2899968 bytes
    RMAN> restore controlfile from autobackup;
    Starting restore at 08-NOV-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=157 devtype=DISK
    recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
    database name (or database unique name) used for search: PRODDB
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
    EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
    channel ORA_DISK_1: control file restore from autobackup complete
    output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
    output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
    output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
    Finished restore at 08-NOV-11
    tried shutdown normally and mount again instead.
    RMAN> shutdown;
    Oracle instance shut down
    RMAN> exit
    Recovery Manager complete.
    C:\>rman target /
    Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database (not started)
    RMAN> startup mount;
    Oracle instance started
    database mounted
    Total System Global Area 490733568 bytes
    Fixed Size 1291360 bytes
    Variable Size 369101728 bytes
    Database Buffers 117440512 bytes
    Redo Buffers 2899968 bytes
    RMAN> restore database until sequence 10 thread 1;
    Starting restore at 08-NOV-11
    Starting implicit crosscheck backup at 08-NOV-11
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    Crosschecked 3 objects
    Finished implicit crosscheck backup at 08-NOV-11
    Starting implicit crosscheck copy at 08-NOV-11
    using channel ORA_DISK_1
    Crosschecked 2 objects
    Finished implicit crosscheck copy at 08-NOV-11
    searching for all files in the recovery area
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
    08\O1_MF_S_766661651_7CJY84LK_.BKP
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting datafile backupset restore
    channel ORA_DISK_1: specifying datafile(s) to restore from backup set
    restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
    restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
    restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
    restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
    restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
    restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
    restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
    restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
    channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
    OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
    P
    failover to previous backup
    //however, still get the same results(ended up with errors)
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 11/08/2011 13:50:29
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    Edited by: HappyJay on 2011/11/08 13:59

  • I have a Mac Book Pro - HELP - problems with bootcamp = too full

    I have have a Mac Book Pro.  My drive is full.  Sadly I had the partition set up at a store that should have known what they were doing (NOT an apple store, but a certified store that carries only Apple products), anyway.. I am now at the point where my bootcamp is full.  I've tried reading a number of posts, but some things apply to me, some things don't so here is my situation:
    Mac Book Pro
    OS X 10.8.2
    Processor: 2.53 GHz Intel Core i5
    Memory 4 GB 1067 MHz DDR3
    Startup Disk: Macintosh HD
    Using Bootcamp with Windows 7
    I purchased Camptunes by Paragon and tried repartioning my drive that way.  It looked like it was going to work until the following error message happend:
    Windows filesystem verification failed.  Please, repair Windows volume and try again.  Windows is not letting me do this because I don't have enough room. Round and round the problem goes.
    Initially when I was trying to clear out my Windows side I found a bulky .NET program I wanted to delete.  It would not delete it for me (I can retry to look for that error message), but essentially it wouldn't delete it at all.  I have no temporary internet files I can delete, cookies or other programs (except my printer drivers), but essentially - I can't figure out what to do next.
    I read another post about a person who didn't want to backup their files first.  This is not me.  I do back up to a LACIE back up drive that has a 999.86 GB capacity with 872.11GB free.  What I want to know is do I have to buy another back up to keep it all completely separate?  What other program do you recommend to create a virtual drive?  Can I get a step by step on what to do?  I have the original windows disk if that helps in the equasion.....
    My head hurts.... help!

    interenet wasn't working properly and i couldn't finish
    Try restarting while holding down the Option key. That should prompt the startup manager window where you can select the startup disk and reboot.
    Then try reformatting (erase) using OS X Recovery  About OS X Recovery
    Keep in mind, Apple does recommend a high speed broadband internet connection for OS X Recovery. A slow connection may time out before recovery is finished.

  • Help - problems with Credit Memo's

    Hi
    Can anyone help. We're running Financials 10.7 and have a problem. We've tried to create a credit memo to cancel an invoice. The credit memo and invoice tie up and are linked all through the line until the 'Invoice Installments' screen where there appears to be no link. This give s the impression that the Invoice is still outstanding.
    Can anyone help with a work-around.
    Many thanks
    Martin.

    Hi there,
    Yes. If both the credit memo & the invoice use the same pricing procedure, then they can be copied from the invoice.
    But there is no direct copy from the invoice to the credit memo.
    Credit memo is a billing doc type which is raised either against a returns order or against an invoice correction request.
    So if you wish to copy the pricing, then you will need to maintain copy controls from invoice to returns order / invoice correction req 1st, then from returns / invoice correction request to credit memo.
    So checkif your company is using the same pricing for invoice & returns. Then maintain F2 to RE order in VTAF 1st, then from RE order to CR in VTFA.
    In that case at item level pricing, you will have to choose the option G or D. Option B cary new pricing is used when the docs have different pricing procedure.
    Regards,
    Sivanand

  • Help - problem with credit memo's

    Hi
    Can anyone help. We're running Financials 10.7 and have a problem. We've tried to create a credit memo to cancel an invoice. The credit memo and invoice tie up and are linked all through the line until the 'Invoice Installments' screen where there appears to be no link. This give s the impression that the Invoice is still outstanding.
    Can anyone help with a work-around.
    Many thanks
    Martin.
    null

    Dear,
    please kindly open a message into Your market place for for such a problem. You need a fix.
    Thanks.
    Mauri

Maybe you are looking for