Help Problem NOT Solved Why have my system preferences suddenly started to reset back to default every time I reboot

Why have my system preferences suddenly started to reset back to default every time I reboot At first I thought it was happening because I disconnected my Google account, but now I've disable that account and switched to Firefox.  I wasn't sure how my browser setting could have anything to do with my system preferences and now I think it's some glitch or missed setting that is causing the problem.  Oh & I locked my preference panel and that did not help.
In addition to what I say above, not only are all my system preferences being reset to default, but also the preferences for word and Excel.  I'm sure it's affecting other programs, but Word & Excel are the main ones that I have a lot of custom setting for.  Especially annoying is the fact that my ribbon commands are reset.  All this started happening when I signed up for a Google Drive account.  The only system updates have been the usual security updates.  I deleted my Google account but haven't uninstalled it.  I'll try this, but I can't figure out how that would result in all OS preferences being reset.

Here are a few more:
"Data Rescue II" from prosofteng.com has a free download demo available.   You will need to follow/read the directions carefully. 
VirtualLab™ Data Recovery  has a free download demo available.
DriveSavers Data Recovery is NOT free.  However, they have a toll free contact phone #, international phone # & fax contact #'s. Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
*FREE* DOWNLOAD DEMO
FileSalvage
**FREE** Download DEMO
Remo Recover
**FREE** DOWNLOAD TRIAL

Similar Messages

  • Why have my yahoo emails suddenly started to fail to open yet the timer icon keeps spinning?

    Why have my yahoo emails suddenly started to fail to open? Up until last week, no problems, now they appearing the inbox, but, I can't open to read them, yet the timer icon continues to spin!

    Hi jeanmcdiarmid,
    Thanks for visiting Apple Support Communities.
    See this article for some troubleshooting steps that you can try on an iOS device or Mac:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    All the best,
    Jeremy

  • Why do system preferences revert back to default every time computer is restarted

    Cannot keep changes to System preferences.  All revert back to default every time computer is restarted.
    Also, all extensions, e.g. adblock, reinstall every time computer is restarted.
    <Personal information edited by Host>

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

    Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • My audio aggregate device is not stable in Mountain Lion, it was fine before I upgraded from Snow Leopard - every time I reboot the computer it loses the configuration and so it is not available in Logic Pro

    My audio aggregate device is not stable in Mountain Lion - it was fine before I upgraded from Snow Leopard. Every time I reboot the audio aggregate device (MOTU TRAVELER, MOTU PRE8 1, MOTU PRE8) has to be reconfigured so that it is available within Logic Pro.

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Why have my system preferences all been restored to default?

    Hi,
    Yesterday my iMac was really playing up, it was writing to the disk, being really noisy and overall not responding much. So after failing to reach the Apple Menu to shut down, I just held the power button on the back of my Alu iMac until it switched off (not slept). This morning I awake, and turn my computer on, log in. Everything seems fine, but, the default Dock is shown, spaces are inactive and all my System Preferences have been restored to defaults, therefore I imagine the System Preferences file or something was corrupt when I force shut down the computer, meaning it started afresh. I have a time machine backup (hallelujah for time machine!) so I can retrieve a certain file and replace it if needs be.
    Could anyone give me instruction on how to get my System Preferences back the way I had them?
    Thanks.

    the system writes to various preference files when you quit applications or shut down normally. It does it by first deleting the old preference file and then replacing it with a new one. In the event of a crash or a hard shutdown it sometimes does the former but has no chance to do the latter. in that case that preference file is created with default values on restart.
    It sounds like you have several problems with your computer and several pref files may have been involved. You might consider restoring the whole preferences folder from the library in your home folder (not the one at the top level of the hard drive). However, this might not fix all the problems if your system was seriously misbehaving. I would do a full system restore from TM from some time point before the problems started. to do that start from the leopard install DVD and once past the language screen choose "restore from backup from the Utilities menu at the top.

  • I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

    I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I have updated my mac book pro and am trying to get icloud and the new lion version. The lion version will not download and my biggest problem is finding icloud on my system preference. Can anyone help me?

    I have updated my mac book pro and am trying to get icloud and the new lion version. The lion version will not download and my biggest problem is finding icloud on my system preference. Can anyone help me?

    Welcome to the Apple Support Communities
    Connecting your MacBook Pro and your MacBook Air will be the fastest way, but you have to spend money on cables and adapters (also, your MacBook Pro doesn't support Thunderbolt).
    As you have a Time Capsule, one thing you can do is to start your MacBook Pro and make a Time Machine backup. Then, turn on your MacBook Air and set it up. Setup Assistant will ask you to restore a backup, so select the option to restore the backup from the Time Capsule and be patient. This can take a lot of time if you have to migrate a lot of files

  • TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

    I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I have to tell Firefox that I am logging in from "home" every time I log into Facebook. Firefox will not let me unclick ""Send me an email" under Login Notifications in Facebook "My Account" settings. Why? (to both questions)

    I have to tell Firefox that I am logging in from "home" every time I log into Facebook. Firefox will not let me unclick ""Send me an email" under Login Notifications in Facebook "My Account" settings. Why? (to both questions)

    It started last week - I normally use Chrome to play my games in Facebook - but I started getting "Sorry, this feature isn't available
    right now"..... When I used IE..... no problem - a friend said to install Foxfire, which I did, but I made the mistake of having my bookmarks and whatever transferred from Google as it is the browser I used most often and it has all my bookmarks, but
    now it does the same thing when I try to log into Facebook. - I have no problem with any other website.  I deleted both Google and Foxfire and tried to start over - I cleared History and checked all the boxes hoping that this would help - but it did not.
     I can't understand why I can get in with IE, but not Google or Foxfire.  Do you have any suggestions.......
    On Friday, it started working again - and everything was fine.  But on Sunday evening I ran the History Clean in Google and when
    I went to log back in, I couldn't and got the same "Sorry" message and has stayed this way since. 
    I ran a Norton scan of the entire computer, a Hitman scan, a CCleaner scan, ...  all to no avail. Problem still exists.
    I tried to run a restore program prior to the problem, but I am getting error messages like mad.
    there has been two Windows Updates in this time frame and I don't know if this has anything to do with it or not - but my Restore program does not work.
    NYCsDancer -- if its working via Internet Explorer, we can't help you much. Most of the time it has to do with Cookies, or your Java Version. I'd reach out to Google's forums for assistance with Chrome
    https://support.google.com/chrome/?hl=en#topic=3227046
    or Firefox support for assistance with Firefox
    https://support.mozilla.org/en-US/products/firefox
    Or as S.Sengupta said  reach out to the Facebook Help center....
    Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

  • Why do Mac games have higher system preferences compared to Windows games?

    Hello,
    I am wondering why Mac games have higher system preferences compared to Windows games?
    For example "The Movies" game on Mac requires:
    Mac: OSX 10.4 Tiger or later,
    PPC G4 1.67 GHz,
    512MB RAM,
    64MB video card,
    DVD drive (minimum)
    Whilst on Windows:
    PC: Windows 98SE or later
    800 MHz CPU
    256MB RAM
    DirectX 9.0c compatible sound and video card.
    Now anyone can see the amount Windows needs compaired to Mac but why such a huge leap.
    And this isn't only on "The Movies" it's the same with "Sims 2" and "Age of Empires"
    If you know why could you please respond.
    Thanks,
    James

    Hi there vickivoo,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    -Griff W. 

  • HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

    I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

    Have a look here >  http://support.apple.com/kb/TS1646

  • Why is it that every time I reboot my computer I have to reload a new library since my old one is in the recycle bin.

    Why is it that every time I reboot my computer I have to reload a new library since my old one is in the recycle bin.

    Well I just recently downloaded the application "Whatsapp" again after I synced my new iPhone 5 to my computer and it wasn't there. So I actually went into the app store and downloaded it from that again. It didn't make me pay the .99 cents as before though. Maybe because I was already in the system. This has really agrovated me, because none of my friends that use "Whatsapp" with thier iPhones experience this problem.
    Someone help please!

  • I am trying to activate root account on my MAC.  The directions I've seen do not match what is in System Preference for Accounts or Users

    I am trying to activate the root account on my new Mac Book Pro.  The instructions that I have found do not match what I have in System Preferences.  What is the process when using Users and Groups.  When I click on Join the Network Account Server- Open Directory Utility I don't see a option to  activate root user as the instructions say at http://support.apple.com/kb/HT1528
    OS X Lion
    From the Apple menu choose System Preferences....
    From the View menu choose Users & Groups.
    Click the lock and authenticate as an administrator account.
    Click Login Options....
    Click the "Edit..." or "Join..." button at the bottom right.
    Click the "Open Directory Utility..." button.
    Click the lock in the Directory Utility window.
    Enter an administrator account name and password, then click OK.
    Choose Enable Root User from the Edit menu.
    Enter the root password you wish to use in both the Password and Verify fields, then click OK.

    Do you mean you cannot select "Enable Root User" from the "Edit" menu as shown below?
    Why do you think you need to enable the root user? I've never needed it in the history of OS X.

  • Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older ver

    Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
    == This happened ==
    Every time Firefox opened
    == either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to default

    I had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
    Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
    I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails.

Maybe you are looking for

  • How to select perticular row in table control for BDC

    Hi all I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is  material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BD

  • Apple TV Software 2.4 and "HDCP Off"

    My Apple TV worked fine until I upgraded the software to 2.4. Now, no HD material will play, citing an HDCP problem. I checked the settings, and under Settings>General>About, I can see that the TV Connection is set at HDM (HDCP off). And there's no w

  • Need to fill out form online

    I have form to fill out online

  • Help in BADI

    Hi, I have created a BADI as the current BADIs for the package are not fulfulling my requirement. Now my doubt is how to attach the BADI that i have created to the transaction, so that the changes i have done in the BADI are reflected when running th

  • Completing PDF forms via web, but saving result on server

    Hi I've been asked to design a system, where individuals are sent a request to complete a templated PDF form with a number of available fields. They complete the form and submit. At this point I need to save the completed form on the application serv