Help! Problems with 845E MAX HSF seating

have a MSI 845E MAX and a P4 2.8 GHz cpu. I bought a coolmaster L71 for 478 socket type but when I put it on the cpu, the four little plastic white pins that hold the HSF mounting tray in place prevents the HSF from actually connecting with the CPU unless I use a load on paste (which is wrong)
If I take out the pins the HSF sits on the CPU fine but surley this cannot be correct? Has anyone else had this problem or have any ideas why?
I have also tried a mates P4 S478 HSF and it does the same, the four pins seem to stop it touching the cpu correctly.
Party

What's up? I got your Email - I don't know about cutting those pins off. Man, that really sucks those heatsinks aren't fitting correctly. What would be wrong with getting a stock Intel fan/heatsink? They are really cheap. I saw one for $7 shipped. Or get the f/h I have. It's a Coolermaster D14-7H53D. However, if you want to try and cut those pins go ahead because you can always buy a new bracket if it doesn't work. Let me know what happens. Good luck.
Man, you can't say (s)ucks in this forum.

Similar Messages

HT201240 PLEASE HELP PROBLEMS WITH MY MAX OSX 10.5.8

Does anyone know how many chaaracter my mac password can be up to ? I forgot my password and my trackpad and mouse is broken so I can't use Command S to make a new one and I'm just trying to figure out what the password requirements were in 2010? any help would be much appreciated I have another macbook but I would really like to get the other one up and running again as a desktop with a mouse and keyboard. Thanks.

edit: trackpad and keyboard don't work it took a fall two years ago when my girlfriend dropped it I can only start it using the s key after power up and after it turns on the keyboard and trackpad do not function.

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problem with Stock A64 HSF and MSI K8N FSR

Hey guys I was wonderinf if anyone could help me with this little problem.
My stock A64 2800+ (newcastle) hsf no longer spins higher than 3500rpm anymore. I first bought my system about 3 months ago and paired it with the msi k8n fsr board. Everything was working fine and under heavy load playing games the hsf would spin to a loud (but effective) 5500rpm max (as measured by speedfan).
About a month ago I managed to kill my k8n board and got a replacement one. Now after setting everything back up, my hsf no longer spins any faster than 3500rpm, regardless if i turn my fan up to 100% in speedfan or run games for hours.
Anyone have a clue?
My specs:
A64 2800+ @ 2.16Ghz (newcastle core)
MSI K8N FSR
1 Gig DDR3200 (generic)
Leadtek Geforce 6600GT

this may sound weird but sometimes i like to return my bios to version 1.3 or below... i want to hear my cpu fan roar! eventhough the reading is high with the old bios, atleast now i'm sure that my CPU is cool... cooler if my CPU fan is on high speed.
hope msi can make a bios update where the user can manually adjust the fan speed to its max... (its true max speed) unlike right now which the max speed only reaches 3000 rpm but its capable of running 5500 rpm.
pray... pray... pray... Lord please have MSI hear my prayers.

Need MAJOR HELP recovering an 845E-Max board (no post)

Hey guys and gals, I need some SERIOUS SERIOUS help here recovering my old board. I have an MSI 845E-MAX board, and decided to do some overclocking to it. While doing it, I raised the FSB too much, and now the system wont post. So I know what your all thinking, ok, take out your CMOS battery, or clear the JBAT1 jumpers. While ive done that, repeatedly, to no avail. Ive cleared the jumpers over and over, nothing. Taken the battery out for a 24hr period, nothing. Took the battery out for nearly a MONTH!, and nothing. Next your probally thinking, while maybe its bad RAM, Vid Card, CPU, etc. While it isnt lol Ive replaced/tested all the current hardware in other systems and they all work fine. Ive got a defenet mobo problem, and its really pissing me off lol on other boards by other manufacturers, if I put my FSB to high and it didnt post, restarting would put it into default specs, so I could adjust my fsb as needed. With this 845E though, its no such luck, and reseting the CMOS dosent do anything to fix it. Ive also read some posts about other boards who dont even have a JBAT1 jumper, and used an "insert" key method, where they power down, hold down the insert key, and boot up. Decided to try this, and it did nothing. I didnt think it was made for my board in the first place, but decided to give it a shot. IVe also tried reflashing/recovering the bios, by downloading the newest bios (its an AMI i believe) renaming it, putting it to a floppy, and booting the system holding CTRL+HOME to force the update. but it does nothing, and dosent even seem to read the floppy as the little green light dosent come on when i power up. The DVD/CD drive does though, and wehn i place WIN XP SP2 in the drive, it reads it and green light stays solid, so its just the floppy drive im having probs with I guess. Also, i get no beeps at startup, but can hear the hard drive boot and spin. I list my hardware specs below to help
So PLEASE, some MSI guru, help me before I go crazy here! :P thanx a million to any one who can lend a hand.
MSI 845E-MAX
2 x 256 Azen RAM PC2100
Benq DVD Burner
Intel Pentium 1.5ghz P4
Nvidia Geforce 64mb
*this is a spare system im building, but the board WAS my primary board till I upgraded, so im use to its settings, just no OC'ing it apparently lol*

I do indeed...and yah i get no beeps at all....
but everything powers up fine...hdd spins...cd rom turns on, if i put in a Nic card, the green light comes when a cat5 cable is in it. So it looks like everything is receing power fine, but i just get no beeps at all to signify start up

Problem with select max(FIELD)

I have a table with the following fields:
PARTID     ART_TYP     AEC     SERVICE     PLANT     STATUS
4711     A     A     2     P     230
4711     A     B     0     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I need a sqlscript where I get the records with MAX(SERVICE)
In this example
4711     A     A     2     P     230
4712     A     B     2     P     230
4713     A     B     0     P     230
I tried this with:
select distinct partid,
     art_typ,
     aec,
     max(service),
     plant,
     status
from t_msltmp
group by partid,art_typ,aec,plant,status
But I get both records of partid=4711
Can someone help me with this problem
kind regards
Menk Slot

ROW_NUMBER() requires explicit ORDER BY clause in OVER:
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/functions105a.htm#86312
SQL> select partid, art_typ, aec, mx, plant, status
2 from(select partid,
3                art_typ,
4                aec,
5                max(service) over (partition by partid) mx,
6                row_number() over (partition by partid order by service desc) rn
7                plant,
8                status
9         from t_t)
10 where rn = 1
11 /
    PARTID A A         MX P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Rgds.
P.S.
Another way to get this (more tedoius):
SQL> select partid,
2 max(art_typ) keep (dense_rank first order by service desc) art_typ,
3 max(aec) keep (dense_rank first order by service desc) aec,
4 max(service) service,
5 max(plant) keep (dense_rank first order by service desc) plant,
6 max(status) keep (dense_rank first order by service desc) status
7 from t_t
8 group by partid
9 /
    PARTID A A    SERVICE P     STATUS
      4711 A A          2 P        230
      4712 A B          2 P        230
      4713 A B          0 P        230Message was edited by:
dnikiforov

HELP/Problems with pull-down navigator bar

Hi everyone,
I was wondering if I could get some input. I have just
re-designed our magazine's site, www.easternsurf.com
I used Pop-Up menu function in Fireworks 8 to generate our
Navigator bar. For the most part everything has been working well,
BUT we've had a couple of complaints that the navigator bar's
pull-down menus get stuck behind the photos/banner ads/etc. instead
of in front of them when viewing in Internet Explorer. I'm on the
Mac platform (OSX Tiger/Macromedia Studio 8) and have seen no
problems viewing in Safari, Firefox and Netscape. The only
complaints have come from Internet Explorer users. A couple of
people updated their browser to the newest version and the problem
disappeared, however we've still had a couple of people that have
written in that the newest version of IE is still not displaying
properly.
Also we've got a strip of button ads running down the left
hand side of each page and I've also seen another issue that's
common on sites of this type...when the pulldown menu overlaps with
a Flash element, there is a problem with the screen re-draw. I've
seen this on several other sites and know it's a common problem,
but does anyone know of a workaround where this won't happen? I
just noticed that signing on to Adobe's site, there almost seems to
be a command where the menu keeps re-drawing at a very rapid rate
so this won't happen.
Any input would be greatly appreciated, although I'm Mac all
the way, we are a business and have to get this site visible for
everyone!
Thanks

Hi Oldbudge,
Welcome to the Community,
Please Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.And see if that helps.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Help - problem with white iphone 4 speaker

Hi, i have a problem with my white iphone 4 speaker. I know the specs stated that the mic is supposed to be on the left and the right is the speaker but i've compared at least 2 other black iphones 4s and there is some volume from the left side (if you close the right side) whereas mine is practically non-existent. Should i be concerned? Is this specific to the white iphone 4? The local telco has not been helpful - they can only reformat the phone and said that this is a software problem. Anyone with similar experience pls share. Thanks in advance.

irene sim wrote:
Hi, i have a problem with my white iphone 4 speaker. I know the specs stated that the mic is supposed to be on the left and the right is the speaker but i've compared at least 2 other black iphones 4s and there is some volume from the left side (if you close the right side) whereas mine is practically non-existent. Should i be concerned? Is this specific to the white iphone 4? The local telco has not been helpful - they can only reformat the phone and said that this is a software problem. Anyone with similar experience pls share. Thanks in advance.
You already know the answer. ALL iphones, every single one of them, have but one speaker at the bottom. You have NO ISSUE at all with your speakers. None. Nothing is wrong. At all. No problem. None.

Problems with Mpower Max Z87

Since yesterday i have the following problem with my pc.
i'm using a gigabyte gtx780 windforce 3x oc als peg and for now its not working anymore. if i am turning on the computer only the fans are working and video display is only possible through the igd, even when its deactivated in bios. all other components seem to work normal, but led debug code ist showing 04 which means "power on southbridge initialization".
so i changed the gtx 780 to my old msi gtx570 twin frozr III and everything seems to work normal for now, but if i am looking into the device manager there's an exclamation mark indicating that the msi mpower max z87 isn't recognized properly and only shown as unknown device.
so, what does that mean? is there a problem with the psu, mb or the gtx780
my system specs are:
Core i7 4770k
MSI Mpower Max Z87 Bios V.1.2
Gigabyte Geforce GTX780 Windforce 3x OC
16 GB Corsair Vengeance 2133 Mhz
Corsair HX850
Windows 8 Pro x64
Edit: The exclamation mark problem disappeared after installing the intel smart connect utility.

Quote from: flobelix on 26-July-13, 18:08:12
Reseat the cpu and check socket for bent pins. If none to be found uninstall current vga driver in safemode using >>Driver Fusion<<. After reboot with the GTX570 install latest Nvidia driver (no beta!).
reseated cpu and found some bent pins. rebent them with precision tools, and for now, everything, even the gtx780, seems to work normal. will try some decent oc to check if there are any problems left because of the bent cpu pins.

875 neo problem with supra max usb on boot

I have one 875 neo m/b with bios ver 1.5.
I have connected one usb modem diamond supramax and when power on the system this sticks when it checks nvram and rebbot.I have tryed all usb ports and all settings in the bios.(memory slow, memory voltage 2,50-2,70 usb device legacy enable, disable).
875 NEO
CPU 2400 FSB 800 MHZ
HYPERTHREADING MPS 1.4
2X256 KINGNSTON PC3200 2,5,3,2,8 IN 1,3 DIMM
2 SERIAL ATA 33,6 WD RAPTOR RAID
ASUS 8460 DELUXE
CINERGY 400 TERRATEC
SB AUDIGY PLATINUM
DVD-RW PIONNER A05 PRIMARY MASTER
CD-RW PLEXTOR 48/24/48A SECONTARY MASTER
ADDTRONICS 420 WATT MAX +3.3V 28A +5V 40A +12V 18A
PEAK OUTPYT TOTAL 245W 18A
7 COOLER 8" 1 COOLER 9"
CORE CENTER 3,3V:3,20-3,22 +5V:4,97-5V +12V:11,46V
CPU 2435=203X12

Yes the system start normaly without supra plug in.
When windows start i plugged in the supra and work fine but i have problem with netmod many times it does not make call and have communication problem with windows with or without supra plug in.
Also my system hang and restart when download files from internet.In event wiewer in system category i have one report for event id:1001 save dump
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x00000008, 0x00000002, 0x00000000, 0xf7acb951). A dump was saved in: C:WINDOWSMinidumpMini062303-02.dmp. ;(

Pleaseeeeeee Help - Problems with position of my web page

Hi, first sorry on my english
I have problem with position of my page. I had made my web page in Indesign CS5 and exported to swf file. My web page is working fine (www.igor-flytying.com) but the page is not in the middle of the web browser. How can I fix the problem????? I am a beginer in Indesign. I had try to make some changes in html file (salign) but still nothing.
Please HELLLLLPPPPPP
Regards
Aljosa

Petteri, SWFObject is much better because it loads the JavaScript so you don't see it inside the HTML page, but it still wraps the swf in a div which by default will be positioned in the upperleft of the browser window.
This is the only way I've been able to center using SWFObject—note that it's the "flashcontent" div style that does the centering not the align embed parameter:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>S W F | Centered</title>
<meta http-equiv="Content-Type" content="text/html" />

<style type="text/css">
          #flashcontent {width: 1000px; height: 750px; margin-left: -500px; margin-top: -375px; position: absolute; left: 50%; top: 50%;}
</style>
          <script type="text/javascript" src="swfobject.js"></script>
          <script type="text/javascript">
                    var flashvars = {};
                    flashvars.myFlashVar = "Testing";
                    var params = {}; //Embed parameters: http://kb2.adobe.com/cps/127/tn_12701.html
                    params.quality = "best";
                    params.align="t"
                    //SWFObject parameters: http://code.google.com/p/swfobject/wiki/api
                    swfobject.embedSWF("swftest.swf", "flashcontent", "1000", "750", "10.0", false, flashvars, params);
          </script>
</head>

<body style="background-color: #888888">
          <div id="flashcontent">
                    <a href="http://www.adobe.com/go/getflashplayer"><img src="getFlash.gif" alt="adobe icon" border="0" /></a>
          </div>
</body>
</html>

Help - Problem with word documents

Hi
All of a sudden I am having problems with documents in my word application. Files I have previously transderred on to my Mac from a memory stick or via email attachments are unable to be altered. i cannot add to a downloaded document that needs to be filled in or alter a date on a letter that I send out each month. I am not very compiter literate.
Beryl

Hi
All of a sudden I am having problems with documents in my word application. Files I have previously transderred on to my Mac from a memory stick or via email attachments are unable to be altered. i cannot add to a downloaded document that needs to be filled in or alter a date on a letter that I send out each month. I am not very compiter literate.
Beryl

Please Help-Problem with Optical Drive, it's a Mystery...

Well I'm a fairly big Imogen Heap fan, and her new CD came out the 25th. So I went to Best Buy and I bought the deluxe version which includes a seperate disc with instrumentals. I got home, put it in, and my Mac made a "scratching" kind of noise, then it spit out the disc. I figured there was a problem with it, I went back to Best Buy, got a new one, and it did the exact same thing.
HOWEVER, both of the instrumental discs worked just fine, and imported just fine. The normal audio disc also works on my Ubuntu computer, Windows computer, and my other Early 2009 Macbook Pro. I also restarted my Mac, cleaned the disc, and that did nothing.
So, what's the problem do you think?
(Also I went to Apple but there were no appointments available, and they were too busy to just look at it without an appointment )

Hi Mate,
I didn't do an OS install, I took it to an apple store and made a Genius Bar appointemnt. Explained the proble and after 15min conversation, they diagnosed it as teh following;
The felt/rubber where you put the CD/DVD had gone hard and the friction is causing the CD/DVD to get stuck and be loaded. They tried to tell me that I need to replace the top case (£140+VAT) as its in-built into it or I can use a £3 spudger to push the CD's in......needles to say the Spudger works fine.....Shame I wasted £100 on the new optical drive ;o( Maybe sell teh spare on eBay....Happy days!

Help, problem with keeping ipod connected..

When I connect my ipod, it updates in itunes and then disconnects itself from the computer...how do I make it so after it updates it stays connected and keeps flashing "Do Not Disconnect" on the ipod?

rahul,
OK, I do understand you may be having some early problems with just a little bit of data with a few tunes. Have you thought about what you will do in the future as you add more? This is my post on that topic:
I have been trying to find a way to upload my CD library to my new 60GB iPod (that function works fine) and classify / manage my CD library on it (using iTunes)- that function is nearly unworkable. Now, today, I have used my only 'free' direct APPLE Support contact and the basic answer was 'Too Bad for You!! The iPod does not have nor support multi level indexing or playlists!!!! So...go ahead, load 500 or 600 Cd's onto your iPod and then try to find the tracks you wish to play!! It can't be done except for a 'flat' one level filing system!!! What a BUMMER

Help - Problem with Java Updating

In updating to the latest version of Java - 8.45 - I must also load the Unlimited Strength encryption files. At least, that's what the README file sez ...
Unfortunately - when I agree to the terms, and download the "Unlimited Policy" zip file, it contains the US Export Policy encryption file, and NOT the Unlimited Policy File.
Can someone help me with what's going on here? Thanks in advance ... !

My friend looks like that u are using javax.swing.filechooser.FileFilter class as your file filter. Nothing wrong with it, but it works only with JFileChooser and not with the java.io.File.listFiles method. for that u will have to implement the java.io.FileFilter interface.
He is the code example...
import javax.swing.*;
import java.io.*;
public class FileTest implements FileFilter {
     public static void main (String args[]) throws Exception {
          new FileTest();
     public FileTest() {
          File f = new File(".");
          File [] list = f.listFiles(this);
          for (int i = 0; i < list.length; i++) {
               System.out.println(list);
class MyFileFilter implements FileFilter {
     public boolean accept(File pathName) {
          if (pathName.isDirectory()) return true;
          String ext = pathName.getName();
          ext = ext.substring(ext.lastIndexOf(".") + 1, ext.length());
          if (ext.equals("java")) { //check for any extension you want to list
               return true;
          return false;

Help! Problems with 845E MAX HSF seating

Similar Messages

Maybe you are looking for