Help! Problems with LCD Screen.

My iMac's specifications are below.
Recently, I've noticed that there is this large patch of the screen which is covered with white bubble-like drops. I've tried cleaning the display, but it looks like they are under the screen. You cannot see them when the display is displaying white or other light colours. When displaying black or darker colours (even when the display or computer is off) one can see the drops.
I'm not sure if it's because of something I did or what, but I want to know if I should take it in for repair, or if there is something I can do (It's still under warranty).
Here are things I suspect:
My iMac is usually under constant sunlight. It's not directly facing my window, but it does get hit my light. But I haven't heard of sunlight ever damaging an LCD screen.
The drops seems to be in some areas, but not all. Which is why i doubt it's something I have done.
When you get close to the screen, you cannot see the drops anymore. Also, when you are at certain angles, you cannot see the drops. This leads be to believe that a certain amount of light is need to see the drops, otherwise they are too faint.
Any help would be appreciated!
Thanks!

Hello Kuro
Take it to the nearest Apple Store or Authorized Apple Service Center, they can remove the glass panel over the display and clean or replace it if needed.
http://www.apple.com/buy/locator/service/
Dennis

Similar Messages

Problems with lcd screen HP Officejet Pro 8600 e-All-in-One Printer - N911a

The backlighting on my lcd screen has all but gone out. Product HP Officejet Pro 8600 e-all-in-one printer - N911a

Hi greenbeaner, I see that you're having problems with your printer's display. I would take a look at the document below. Officejet Pro 8600 Let me know how it goes.

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

We are users here. We cannot possibly know when a new update will be available.

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

X220:Graphics problem with full screen videos

I have got my X220 laptop last month. I am facing problem while playing youtube videos full sceen.
videos can be seen best with smaller window but there is major graphics problem with full screen.
Can someone help on this?
I am using Windows 7 Enterprise edition.
Thanks

what do you mean by major graphics problem, please elaborate.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Problem with Full Screen

Ok I am getting problems with full screen graphics on some computers.
I am writing an internet based RPG and this is really eating into my time...
Can any one explain why my graphics will not show some times (works others) with the exact same code running....
I am using a BufferStratagy with a frame.
Any help would be gladly apreashiated thank you in advance,
Phibred

Not a thread issue, no thread on this side of the program and yes there is a media tracker. However I have learned that my problem was that my screen does not like to flip to 800x600 for java applications for some reason thx any way.

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

HELP/Problems with pull-down navigator bar

Hi everyone,
I was wondering if I could get some input. I have just
re-designed our magazine's site, www.easternsurf.com
I used Pop-Up menu function in Fireworks 8 to generate our
Navigator bar. For the most part everything has been working well,
BUT we've had a couple of complaints that the navigator bar's
pull-down menus get stuck behind the photos/banner ads/etc. instead
of in front of them when viewing in Internet Explorer. I'm on the
Mac platform (OSX Tiger/Macromedia Studio 8) and have seen no
problems viewing in Safari, Firefox and Netscape. The only
complaints have come from Internet Explorer users. A couple of
people updated their browser to the newest version and the problem
disappeared, however we've still had a couple of people that have
written in that the newest version of IE is still not displaying
properly.
Also we've got a strip of button ads running down the left
hand side of each page and I've also seen another issue that's
common on sites of this type...when the pulldown menu overlaps with
a Flash element, there is a problem with the screen re-draw. I've
seen this on several other sites and know it's a common problem,
but does anyone know of a workaround where this won't happen? I
just noticed that signing on to Adobe's site, there almost seems to
be a command where the menu keeps re-drawing at a very rapid rate
so this won't happen.
Any input would be greatly appreciated, although I'm Mac all
the way, we are a business and have to get this site visible for
everyone!
Thanks

Hi Oldbudge,
Welcome to the Community,
Please Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.And see if that helps.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I have got a problem with my screen... my screen becomes blurred, horizontal streaks. What can i do ?

I have got a problem with my screen... my screen becomes blurred, horizontal streaks. What can i do ?

Hi saigon88,
If you are having issues with the display on your MacBook Pro, you may find the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

I am having problemas with the screen. The graphics look like taken with infrarred, i am having problemas with the screen. The graphics look like taken with infrarred

I am having problems with the screen. the graphics look like infrarred and there are stripes in the Blue screen i am using now.

If Demo's suggestions don't help, and the iPad is out of warranty, try giving it a solid smack or two on the back with your knuckles or your palm. Hit where the Apple logo is or just above it, and be firm but not harsh.
Something internal might be a touch loose and a good smack or two may sort things out
~Lyssa

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problem with sub-screen actions on Cancel button

Hi all,
I have a problem with sub-screen.
I created a subscreen (screen sequence in MM01/MM02/MM03). When users leave this screen, I call POPUP_TO_CONFIRM to ask if they want to save the data.
1) My goal is: when they choose Cancel, no actions are performed and users will see the current screen. However, I cannot use command: SET SCREEN 0 or LEAVE TO SCREEN 0 because the system gives an error message:
*SET SCREEN not allowed in subscreens*.
2) How can we determine when the user leaves the screen? which value of SY-UCOMM will be used to check this?
Thanks in advance.

for dis SET SCREEN is not required.
Consider d code given below as n eg:
CALL FUNCTION 'POPUP_TO_CONFIRM'
    EXPORTING
      titlebar              = 'SAVE'
      text_question         = 'SOME _QUS'
      text_button_1         = 'YES'
      text_button_2         = 'NO'
      default_button        = '2'
      display_cancel_button = ' '
    IMPORTING
      answer                = l_ans
    EXCEPTIONS
      text_not_found        = 1
      OTHERS                = 2.
IF sy-subrc <> 0.
    MESSAGE e066.
ENDIF.
IF l_ans EQ '1'.    " when yes is pressed
   MODIFY db.
   commit work.
   leave program.
ELSEIF l_ans EQ '2'. "when no is pressed
    leave program.
ELSE.     " when cancel is pressed
ENDIF.
In above module when Yes is pressed it saves data den leave prog.
As no action is specified for cancel button it will remain on that screen only from which popup is called, in this way ur problem can be solved.
Reward properly.

Problem with SAP Screen

Not sure if this is the correct forum.
Okies, a user of mine has a problem with her SAP screens. It seems that she can't view the full screen of CJ20N She has to drag the window bigger to be able to see the content. She uses this window in a split monitor view, i.e. some of the applications are displaying on the laptop window while other applications display on the monitor.
Details of her SAPGUI:
Release 640 Final
File version: 6404.4.16.1015
Build: 774474
Patch Level : 16
Do note that her primary monitor (notebook) is always set to 1280x800 and the secondary monitor is set to 1024x768. Anyone encounter this problem before?

Hi,
This is problem with windows screen resolution. Better to use, maximum supported window size and make sure to use same size for both the screens.
Regards,
Ganesh

Help! Problems with LCD Screen.

Similar Messages

Maybe you are looking for