HELP/Problems with pull-down navigator bar

Hi everyone,
I was wondering if I could get some input. I have just
re-designed our magazine's site, www.easternsurf.com
I used Pop-Up menu function in Fireworks 8 to generate our
Navigator bar. For the most part everything has been working well,
BUT we've had a couple of complaints that the navigator bar's
pull-down menus get stuck behind the photos/banner ads/etc. instead
of in front of them when viewing in Internet Explorer. I'm on the
Mac platform (OSX Tiger/Macromedia Studio 8) and have seen no
problems viewing in Safari, Firefox and Netscape. The only
complaints have come from Internet Explorer users. A couple of
people updated their browser to the newest version and the problem
disappeared, however we've still had a couple of people that have
written in that the newest version of IE is still not displaying
properly.
Also we've got a strip of button ads running down the left
hand side of each page and I've also seen another issue that's
common on sites of this type...when the pulldown menu overlaps with
a Flash element, there is a problem with the screen re-draw. I've
seen this on several other sites and know it's a common problem,
but does anyone know of a workaround where this won't happen? I
just noticed that signing on to Adobe's site, there almost seems to
be a command where the menu keeps re-drawing at a very rapid rate
so this won't happen.
Any input would be greatly appreciated, although I'm Mac all
the way, we are a business and have to get this site visible for
everyone!
Thanks

Hi Oldbudge,
Welcome to the Community,
Please Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.And see if that helps.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Problems with pull-down menus

I have been having a lot of trouble with Safari Version 7.0.2 (9537.74.9) since upgrading to 10.9.2. One such problem is with pull-down menus in websites. (This is as distinguished from the pull-down menus of Safari itself.) Many websites have pull-down menus. These website menus do not work effectively in Mavericks. For example, one website that is very important to me has a menu that is longer than the height of my monitor. And the selections that I almost always need are at the bottom of that menu. When I scroll down that menu, the menu proceeds too fast, and I almost always overshoot the selection that I want. At that point, then, Safari stops the operation of the pull-down menu, and I have to reload the whole page.
Safari gets worse. Often I try to print a webpage to PDF. When I pull down the "PDF" menu in the print window, I have to be very, very careful to select the exact selection "save as PDF." If I don't, then Safari crashes, and I get a dialog box asking me if I want the OS to send a notice to Apple. I click "Yes." I wish the button said, "Yes, of course, right now, without delay," but it does not. And then I have to wait for Safari to start up again.
Is there a solution to this problem?

Hi, Cesidio, welcome to Apple's user-to-user discussion forums.
You have the last version of Safari that will work with OS X 10.2.x. You might want to give Firefox a try.

Problem in Safari with pull-down menus

My current version of Safari, Version 7.0.3 (9537.75.14), is the buggiest software I have ever had from any Apple--bar none. The problem is dealing with pull-down menus.
The first such problem is in dealing with pull-down menus on websites.   Some of these menus are quite long.   On one particular menu the choice that I routinely need is way down near the bottom.   Routinely Safari stops scrolling before I can get that far down the pull-down menu.
And, always, when Safari stops scrolling on a pull-down menu on a webpage, it refuses to allow me to scroll down again.   To get the webpage's pull-down menu to operate then, I have to re-load the webpage.   That is a big problem for one website that I MUST use. This website has three pull-down menus on one webpage. Because Safari always locks up on the first menu, this crucial website is unusable in Safari. I have to use Firefox for this absolutely essential website.
And Safari has trouble with one of its own pull-down menus. This is the PDF menu in the printer window. Not always, but too often, when I pull down that menu to print to PDF, Safari crashes.   I have to wait for a dialog box to come up and click "send report to Apple" in order to get Safari to reopen.   I don't know how many such reports I have sent to Apple. I get the feeling that Apple is not listening.
Does anyone have any suggestions for these problems? TIA

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Problems with Vertical Spry menu bar in Internet Explora

Hi I'm new to Dreamweaver,
I having trouble with a new site I'm making in CS4. A problem with a vertical menu bar, in IE. Can anyone help?
1. The text is left aligned and should be centered.
2. The menu bar has moved left
3. My paragraph text has moved up the page and aligned itself to the to the menu bar.
Website address: http://www.greenwyse.co.uk/
I'm finding dreamweaver a bit clunky, reading the 'Missing Manual' but still very frustrating. Any one have any idea's/
cheers
myquirk

Sorry, but your CSS is has been mangled beyound recognition.
The solution is to start with an untouched style sheet. Then add or modify the CSS testing in your browsers as you make the changes.
Have a look at the following where I have positioned the menu. All that is now required is the styling for font and the hover event.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet">
<style>
body {width: 960px;    margin: auto;}
.article {clear: both; margin: 20px;}
/* SPRY MENUBAR */
ul.MenuBarVertical {width: 29em; margin: auto; border: none;}
ul.MenuBarVertical li {width: 29em; text-align: center;}
ul.MenuBarVertical a {background-color: transparent;}
</style>
</head>
<body>
<h1><img src="http://www.greenwyse.co.uk/greenwyse natural products/green_wyse_logo.png" width="200" height="136" alt="Green Wyse Natural Body Care Products" longdesc="greenwyse natural products/green_wyse_natural_body_care_products.png" /></h1>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="index.html">100% Natural</a></li>
<li><a href="greenwyse natural products/about dawn Ireland.html">Handmade</a></li>
<li><a href="greenwyse natural products/Hand-Made-Natural-Bodycare.html">Eco Friendly</a>      </li>
<li><a href="greenwyse natural products/green wyse body care products.html">Luxurious Body Care</a>    </li>
</ul>
<div class="article">
<p>Working through a top-down, bottom-up approach, the vitality of conceptual synergies is of supreme importance to focus on improvement, not cost. Motivating participants and capturing their expectations, through the adoption of a proactive stance, the astute manager can adopt a position at the vanguard. Building flexibility through spreading knowledge and self-organization, by moving executive focus from lag financial indicators to more actionable lead indicators, the new golden rule gives enormous power to those individuals and units.</p>
<p>Organizations capable of double-loop learning, empowerment of all personnel, not just key operatives, measure the process, not the people. In a collaborative, forward-thinking venture brought together through the merging of like minds. The balanced scorecard, like the executive dashboard, is an essential tool in order to build a shared view of what can be improved, the vitality of conceptual synergies is of supreme importance. While those at the coal face don't have sufficient view of the overall goals.</p>
</div>

<script src="SpryAssets/SpryMenuBar.js"></script>
<script>
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
Gramps

Problems inserting a Fireworks navigation bar in Dreamweaver

I designed a navigation bar in Fireworks. When I preview it
works fine and I exported it as a "HTML and Images" file type. I
used Dreamweaver to insert it through Insert, Image Objects,
Fireworks HTML, I browse the html file, but when I click OK it
displays the message: "The selected file is not the correct format.
Please select an HTML file which was exported from Fireworks". What
am I doing wrong. Is it the file format when I export it? Please
help me, I am a rookie with this, have no manuals, no training at
all, just you.

I have the same problem: I designed a navigation bar in
Fireworks. When I preview it works fine and I exported it as a
"HTML and Images" file type. I used Dreamweaver to insert it
through Insert, Image Objects, Fireworks HTML, I browse the html
file, but when I click OK it displays the message: "The selected
file is not the correct format. Please select an HTML file which
was exported from Fireworks". What am I doing wrong. Is it the file
format when I export it? Please help me, I am a rookie with this,
have no manuals, no training at all, just you.
I followed your directions and still received the same error.
What can I do?

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problem with drill down in time dimension - OBIEE 11G

Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.

1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

Dynamic programming tabstrip, no tabs in pull down navigation menu

Hi everybody,
I create with dynamic programming a tabstrip with some tabs. Than I have the problem that the navigation menu ( or pull down menu ) for the navigation between the tabs is not filled.
So my question is, must I put the generated tabs in the menu and how, or is it a feature not yet supported? I couldnt find a method to do this.
Thanks for any help
Regards
Christian

webmasterinflorida wrote:
> Hi everyone,
>
> I was wondering if I could get some input. I have just
re-designed our
> magazine's site, www.easternsurf.com
>
> I used Pop-Up menu function in Fireworks 8 to generate
our Navigator bar. For
> the most part everything has been working well, BUT
we've had a couple of
> complaints that the navigator bar's pull-down menus get
stuck behind the
> photos/banner ads/etc.
Consider redesigning again? The page is 240 kb, which is
about 200 kb
more than it should be. It would be OK if everyone used a
high speed
connection, but broadband penetration in the US is stuck at
around 50%.
About half your viewers aren't going to stick around until
the page
finished loading.
Skim through the forum posts to learn more (and scary stuff)
about the
drop down menus.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Cleaner Navigation with a second navigation bar

Does anyone know if it is possible to create a second navigation section in a site and how? It will greatly help reduce clutter in the main navigation on the top of the page (Welcome, My Ablums, My Movies, ... 20 other items I plan to create). I need this specifically for a My Travels page or set of pages I would like to create. The way I envision it to work is similar to my current site. A user would click on the My Travels page which will navigate then to a page with a navigation section on the left side of the page that will list places I've been to as a navigation menu (France, Spain, Switz, Turks n C, St. Martin, Puerto Rico, Greece, etc...). They could then click on each place to get content specific to that place with pictures, etc ...
I also didn't want to create 30 different pages (one for each place) and have to manually manange the sub navigation menu on each page. i.e. if I go to another place, I don't want to have to create a new page and have to change all of the other sites by adding a link to each navigation section ...

It wouldn't look odd if you had the page containing the iframe having another appearance than the pages loading into the iframe. However this approach is good to link external sites but less to link your own site as the pages loading in the iframe wouldn't have any navigation bar on them. Thus if someone jumps in on one of those pages from google or whatever he wouldn't know there are other pages as well...
I'm currently working on putting an iframe into each page which will load the menu so that you just have to change the one menu page to update the menu on the whole site instead of changing it on each page, that makes my life easier... Until now I just copied and paste it to all sites each time I changed the menu and that's really time consuming as the site is growing... That also solves the problem of embedding a page in a same looking page as the menu is only a little part of the whole page and you can make it look as it were part of the page...
However in your case I would just make a "Travelling page" (Travelling comes up in the main menu) and on that page make make an index of all your trips (which will not appear as single pages in the main menu, Inspector PageTab, uncheck Include page in navigation menu). So when you click on Travelling page you get the list of:
Italy
Switzerland
Alaska
or whatever
click on one of those links and you get that page, to get to another destination when looking at Italy just hit Travelling in the Main menu (nav bar) and again you're on the index site and choose another destination.
Thus you only have to change that index page.
Example:
http://alyeska.altervista.org/en/Journeys.html
hit Iceland get to the Iceland page
hit journeys in the nav bar
choose other destination (not many active sorry, I'm too busy on other stuff...)
I really do think it's the easiest way...
Regards,
Cédric

Can not pull down notification bar in PORTRAIT mode

I bought K900 from flipkart.com 2 months ago and everything was working ok. Now suddenly I have a problem with the notification bar; I can not pull down my notification bar. This problem started when I was using "GOOGLE+ app" and suddenly the notification bar automatically got pulled down; from that point I am unable to pull down my notification bar down. I have tried following ->
1) Disable google+ app, uninstall google+ uppdates
2) Restart phone normally and ALSO restarting the phone in safe mode.
3) clear cache using an app "App managet" and also clear ALL cache using the recovery (by pressing vol down and power button).
4) Factory reset
5) tried another lauchers : LauncherPro, Atom launcher
Has anyone faced this problem? There is an app on playstore "Drop down" which pulls down the notification bar. The touch sensors and also the display is working fine in the area of the notification bar (BUT I can not pull down by using fingers/swipe-down action). When the screen is in LANDSCAPE mode i.e. while playing a video using MXPlayer; the notification bar CAN BE PULLED DOWN, BUT CAN NOT in PORTRAIT mode.
I have also read on the internet that some people having samsung galaxy s3/s4 have also faced the same problem.
Can anybody suggest me to do something? Are my screen pixels/touch sensors dead on the top most row??
My K900 is stock(non-rooted) and has android 4.2.1; I have not updated my phone to the latest firmware.

I will leave this answer to my original question.
I called Apple and was completely disappointed with their answer. They indicated that they would not answer such a question, since they deemed it to be "outside of the scope of Apple support" since my question was deemed "not a consumer-oriented
question."
So yesterday, I took my Samsung SyncMaster 204T monitor to the local Apple retailer to try it out on an actual system. I specifically tried it out on the 24" iMac with the nVidia 7300GT graphics card, since that is the system I was interested in.
It turned out that this monitor works beautifully in portrait mode with the above system using Tiger 10.4.8.
So, I went and bought it!!

Cannot pull down notification bar after TB software upgrade?

I completed the software upgrade last night on my TB. For some reason the notification bar will no longer pull down. Any thoughts on what the problem might be?

Hello owj,
Thank you for your inquiry today. I'm sorry to hear that you are having issues with your recent software update. As a user of the same device, I understand how aggravating it can be to have an issue that was not there before the update. In order to resolve this issue, please complete a hard reset on the device. Once this is completed, your device will refresh and verify the software update for any issues.
Apps
Settings
Storage
Factory Data Reset
Rest Phone
Please let us know if you have any further issues after completing the reset, thanks!
MatthewS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Problems with g580's brightness bar and Geforce 630m drivers.

Hi,
There is two problems with my Lenovo g580.
The first - i can't install new drivers for my nVidia geforce gt 630m from official nvidia site. When i try to install it (301.42 last stable version), there is the message that install manager didn't find compatible hardware.
The second - when i press fn+up/down keys, my brightness bar doesn't change. Only static picture, but brightness changes.
Thank you.

Did you try installing them from the lenovo site or the drivers in d drive? Do you have the stock drivers installed ? Is device manager sensing the graphic hardware? Do you have OEM install if windows? For the brightness problem ,it is ok for the windows brightness indicator to remain unchanged as lenovo energy management oversee it.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Help: Problem with scrolling my html items and placed objects they keep cutting through my top menu

Basically whenever i place an html item in my Muse site or an object I encounter a problem when scrolling down past that object in the preview. I have a horizontal menu bar that sits on the top of my site and whenever I scroll down the html items and objects
cut through my menu. Is there any way to rectify this? - i've tried pinning objects but can't figure it out. Any help would be greatly appreciated.
Thanks,

So you have a pinned Menu in the Master page but is being overlayed by the objects in page when you scroll down? If that is the case, select the Menu in the Master, right click on it and Move To Master Foreground.
Thanks,
Vinayak

Issue with pulling down one view controller and posting another one

I have a situation where I need to post a modal view when another one is closed by the user.
Say i have a EULA a user must accept before continuing and once the EULA is accepted I want to show a Splash screen which is another View controller.
So essentially when the user accepts the EULA, the EULAViewController calls its delegate's eulaAccepted method. In this case the delegate is a view controller inherited from UIViewController object.
- (void) eulaAccepted {
// Dismiss the EULA controller first
[self dismissModalViewController animated:YES];
// Now show the splash screen to the user
SplashController *splash = [[SplashController alloc] init];
[self presentModalViewController:splash animated:YES];
[splash release];
When I do this, the code sort of goes into recursive loop with lot of the following in the stack:
UIView(Hierarchy) _makeSubtreePerformSelector:withObject:withObject:copySublayers:
If I present the splashController in another method which I invoke after a certain delay then it works fine. But the timing is again an issue since it works on some devices and not on others. So I do not like that solution.
What is the best practice to handle such situations? I was under the impression that the OS would sequence these animations and perform one after the other and I would not have to worry about them but doesn't look like it works that way.
Would greatly appreciate your inputs.
TIA,
-TRS

Here is what I did. I overrode the presentModalViewController:animated: and then if a controller is already posted, I start a thread which waits for the old one to be pulled down before the new one is posted.
There could still be a problem here if postModalViewController is called before another one has been posted since then self.modalViewController will still be nil. But the UIViewController can deal with it. My current issue is posting one when another is being pulled down, not posting 2 views at the same time
This works but I still would like to know if there is a better way to handle such situations.
-TRS
// Invoke the super with animation set to YES
- (void) presentModalViewControllerWithAnimation:(UIViewController *) vc {
[super presentModalViewController:vc animated:YES];
// This method should be invoked in its own thread
// If there is a modal controller already posted then wait for it to be pulled down before posting this one
- (void) checkAndPresentModalViewControllerWithAnimation:(UIViewController *) vc {
while (self.modalViewController != nil) {
[NSThread sleepForTimeInterval:0.1];
[self performSelectorOnMainThread:@selector(presentModalViewControllerWithAnimation:) withObject:vc waitUntilDone:NO];
// Invoke the super with animation set to NO
- (void) presentModalViewController:(UIViewController *) vc {
[super presentModalViewController:vc animated:NO];
// This method should be invoked in its own thread
// If there is a modal controller already posted then wait for it to be pulled down before posting this one
- (void) checkAndPresentModalViewController:(UIViewController *) vc {
while (self.modalViewController != nil) {
[NSThread sleepForTimeInterval:0.1];
[self performSelectorOnMainThread:@selector(presentModalViewController:) withObject:vc waitUntilDone:NO];
// Override the UIViewController method
// If no modal controller is yet posted then directly invoke the super's presentModalViewController:animated:
// If one is already posted then start a worker thread to wait for it to be pulled down before posting the new one
- (void) presentModalViewController:(UIViewController *) vc animated:(BOOL)animated {
if (self.modalViewController == nil) {
[super presentModalViewController:vc animated:animated];
} else {
if (animated) {
[NSThread detachNewThreadSelector:@selector(checkAndPresentModalViewControllerWithAnimation:) toTarget:self withObject:vc];
} else {
[NSThread detachNewThreadSelector:@selector(checkAndPresentModalViewController:) toTarget:self withObject:vc];

Help! Buggy - Pull down menus not highlighting, more

I've got symptoms!
First, the pull-down menus were not highlighting after clicking
on with mouse. I tried tech tools, it ran into problems about
15 minutes in. I decided to do an Archive Restore.
Now the menus still do not highlight (after all the updates
loaded as well), and the cursor does not switch to specific
cursors when I mouseover links, and when I open a new
program, it reverts to the finder window and I have to click
the program forward from background to start using it.
Any suggestions? Ideas? Anyone else experience this?
I upgraded ram about 4 months ago.
Thanks
Tom

Hi Tom:
One other thing to look at.....
Open disk utility. Highlight (not select) your HD - not your own files. At the bottom there is something called S.M.A.R.T. If that says anything other than "verified," you have a HD problem.
If the RAM is non-Apple, I would pull it and see if the problems go away. I worked with computers for over 50 years, and still have no idea why some things happen when they do!
Running the archive and install again would not hurt. I do not use tech tools. I do remember that there were some problems with that software a couple of years ago, but I do not know anything about its current status.
Barry
P.S. The reason I quizzed you about the OS X 10.3 is that only a few people are using it now (that is not a criticism, just an observation).

HELP/Problems with pull-down navigator bar

Similar Messages

Maybe you are looking for