Help: Process control - kill itself and its phater

Friends,
If I use the Process control. Is it possible to use the Process Control 'Cancel workflow' to kill ONLY the actual sub-wf and its phater, without killing its grandfhater ?
Grandfhater - WF
Fhater - Sub-WF
Actual Sub-WF (Using Process control here)
I want to kill only this actual and its fhater. I want the grandfhader alive and go on.

Create Container element[like status] in Father SUB-WF and In Actual SUB-WF.
Based on condition if you want to terminate Actual SUB_WF and Father SUB-WF then set the set container element status = 'X' and then use process control [terminate workflow] this will terminate Actual SUB-WF.
then do the binding fo container element status from Actual SUB WF to Father SUB WF.
Then in the father SUB WF check the container element status . if Status = 'X'. then use process control to terminate the Father SUB WF.
In the process control use terminate workflow.

Similar Messages

SAP GRC 10.0 Process Control - IT, HR and FICO Controls

Hi,
I need more details about GRC 10.0 Process Control - IT, HR and FICO Controls. Normally we are using standard controls in implementation. According to the business as well as industry requirements, we can create new custom controls. Can you please elaborate IT,HR and FICO controls and their significance in Process control implementation.

Dear Reddy,
as you are asking for suggestions on internal controls I would strongly recommend to check out my document in this regard.
http://scn.sap.com/docs/DOC-56548
Let me know if you have any specific question.
Regards,
Alessandro

Firefox stops playing sound, closing Firefox leaves straggling processes running, kill those and sound returns, how to fix?

Firefox 3.6.8 just now on Ubuntu 9.10, but happens on 8.04-10.04 Ubuntu with related older Firefox versions.
Problem is probably related to Youtube/Flash problems, but something gets stuck in Firefox. I can close the main instance of Firefox, but looking in 'top' I can still find processes running for Firefox (sometimes if I try to restart Firefox I will get a note that Firefox is already running). If I kill those 'runaway processes' then restart Firefox I have Youtube/etc sound back.
When this happens all programs on the computer cannot produce sound. When processes killed then sound works all around.

I was able to fix this problem on my computer in Windows 7. Try going to start/control panel/programs and then uninstall the flash plugin -
then start browser again go to a flash video and when prompted install plugin again.
This worked well for me let me know how everyone else makes out.

WebI Processing server 4.0 and its common services

Hello there.
Tried to search here as well in SAP notes area, but did not find anything useful. Problem here is that the default WebI processing server was deleted and when I'm trying to create it from a scratch it allows to add only single service, for example: WebIntelligence Core service or WebIntelligence Common service etc.
By default WebI pro server consists of Core, Processing,Common, Information Engine service... ok the last one can be added to APS server, but how to get tose 3 Core/Common/Processing to single server, I can't add them from a list because it's empty. I do not want to recreate the SIA node, but the problem here is that one of those services consuming huge amount of memory...more than 6GB of mem and I do not see the switch how to turn it out.
many thanks in advance

Hi again
I do not like to bump like this, but maybe somebody have any idea how to deal with it? Maybe it makes sense to add this question to diferent thread?
Aiwar

I have two users on my home pc but one has a "hammer" icon next to the help in the menu bar and its not even english! help

Ok, again I have tried to download several time the new version of firefox and with my wife as administrator she has a little icon like a hammer and when i open its a game but not english but on my user page i downloaded the same new firefox but don't have this icon does this mean she has a problem with her user interface

I'm going to suggest a new Firefox profile in your wife's Windows profile. The following is a little long, but not difficult if you go step by step.
First, I recommend backing up your wife's Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, with all Firefox windows closed, start up in the profile manager and create a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
Hopefully this one will be "hammer free" on first run and after closing down Firefox and restarting it in the new profile again. If so, the problem may have been one of your wife's add-ons. You have the choice to keep the problem profile and disable all non-essential add-ons, or migrate key settings to the new profile.
To move key settings like bookmarks from your damaged profile to the new profile, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
If the new profile also has the hammer, it could be created by an add-on in a separate folder. Please open Help > Troubleshooting Information and copy/paste the extensions and plugins in your reply.
Note: after using the profile manager, Firefox generally keeps using the last selected profile. To switch, close Firefox and use the profile manager again.
Any luck?

HELP! Control Panel missing and booting problems

For some reason I cannot access the control panel where all the icons for networking, hardware and so and so on normally are to be found.
It is not present as an icon on the dock and does not appear when in the "apple" menu I click the german translated name of it"Systemeinstellungen". Am I forced to install again the whole Leopard !!! or is it htere a way to get the panel back?
I have also general problems. Often I am forced to start twice the Mac since it remains the first time in the booting process with the multicolour round wheel spinning endlessly.
Thanks in advance ;-))

Given your collection of problems reinstalling seems a good idea:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Help needed in index creation and its impact on insertion of records

Hi All,
I have a situation like this, and the process involves 4 tables.
Among the 4 tables, 2 tables have around 30 columns each, and the other 2 has 15 columns each.
This process contains validation and insert procedure.
I have already created some 8 index for one table, and an average of around 3 index on other tables.
Now the situation is like, i have a select statement in validation procedure, which involves select statement based on all the 4 tables.
When i try to run that select statement, it takes around 30 secs, and when checked for plan, it takes around 21k memory.
Now, i am in a situation to create new index for all the table for the purpose of this select statement.
The no.of times this select statement executes, is like, for around 1000 times of insert into table, 200 times this select statement gets executed, and the record count of these tables would be around one crore.
Will the no.of index created in a table impacts insert statement performace, or can we create as many index as we want in a table ? Which is the best practise ?
Please guide me in this !!!
Regards,
Shivakumar A

Hi,
index creation will most definitely impact your DML performance because when inserting into the table you'll have to update index entries as well. Typically it's a small overhead that is acceptable in most situations, but the only way to say definitively whether or not it is acceptable to you is by testing. Set up some tests, measure performance of some typical selects, updates and inserts with and without an index, and you will have some data to base your decision on.
Best regards,
Nikolay

Ok the button where u go to the main screen is brokein im never rough with my ipod but i need help is it coverd with tech support or defect help i really like it and its my phone and i have ipod touch 4g

i need to know where i can send it back to get repairs only the home button is broken

Here you go, http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod

GRC AC 5.3 and GRC Process Control on the same server

Hello,
Can we install SAP GRC AC 5.3 and GRC Process Control 3.0 and GRC Risk Management 3.0 on the same box/ same server.
Is there a OSS Note, which talks about having the above 3 components on one box?
Thanks,
Imran

Hello Imran,
1- My 3 question ARE do I need a separate JAVA Stack for GRC Process Control and seperate JAVA Stack for GRC Access Control
-> No, you can have them installed on save Java stack.
OR
Can I use the same JAVA Stack for GRC Process Control & GRC Access Control?
-> Yes, you can. You have to make sure that you are on SP10 or above for Access Control as only then it will support NW Java 7.01.
2- Can I use EP 7.0.1 installed on same server for both GRC PC 3.0 and GRC AC 5.3?
-> Yes, you can.
3- Can 1 single AS JAVA Database contain both GRC Access Control VIRSA Tables and GRC Process control tables at the same time?
-> For process Control the tables reside on the backend SAP as it is webdynpro ABAP application and for access control the tables reside on the Java database as it is java and webdynpro JAVA application.
Regards, Varun

Are GRC Access Control, Process Control and Risk Management separate?

Are these 3 different modules that you have to purchase separately or are they included in one suite?

Hi Anne,
If you are refering to GRC Access Controls 5.3, Process Control 3.0 and Risk Management 3.0 - All 3 are separate.
A new version of GRC 10.0 has been launched which is currently in ramp up. This has all the above 3 in one suite.
Thanks and Best Regards,
Srihari.K

Process Control 2.5 - Cannot find controls and control rule assignments

Dear expert,
I am trying to set up Process Control 2.5 and am currently trying to set up controls as well as schedules for control monitoring. I am, however, having the following basic problems:
-I cannot find most of the controls which I have created when I search for them in Evaluation Setup u2013> Automated Test rules u2013> Control Rule Assignment. Therefore, I cannot assign a rule to those controls.
-For those controls that I did manage to find and assign to rules, I was in turn not able to find these in Evaluation Setup u2013> Scheduling u2013> Monitoring Scheduler when trying to create a schedule. I get the error message u201CControl Rule Assignment not foundu201D, even though I do not delimit my search options.
-I cannot see the processes which I have assigned to my user under My Home u2013> My Process.
Thanks for any hints!
Regards,
Felix

Hi Felix,
Is your user the owner of objects you wish to see in the My Process. Your user should either be Organization Owner or Process Owner. If you are an organization owner but not an owner of lower-level objects within your organization (such as controls or subprocesses), you will still see those objects listed within My Processes because you are responsible for them, although not the direct owner.
Thanks & Regards,
Venky.

Dock application gets killed itself on Lion, how to debug this issue?

Hi, Dock application gets killed itself and it dissappears and relaunches itself after for few seconds, This is happening for every 5 min or so. it is quite annoying problem. how to debug this issue? any help?

When I look the system logs - there is an exception each time I try to run the application or open a window:
9/5/09 10:33:12 PM Linear[23545] Cannot create BOOL from object <Regression: 0x1461f0> of class Regression

Error in GRC process Control 2.5 login through NWBC

Hi All,
we have installed GRC Process Control 2.5 and configured as per the installation guide. when tryig to connect the same through NWBC, we are getting the following error.
"The navigation tree is empty (no entries exist for the roles you are assigned in PFCG/PCD)"
Please help me on this error.
Regards,
Gurugobinda

Hi Gurugobinda,
In PC 2.5 NWBC, the menu application is based on the role assignment of current login user.
1. T-Code PFCG: View the SAP_GRC* roles, navegate to the tab Menu, make sure the menu for this role exists. It should exist since the role is delivered by SAP. If you are customizing your own role, you may forget to copy the menu.
2. T-Code SU01: View the user you are using, make sure the role assignment is done.
3. Verify the menu from Backend: Login to the R/3 system, at the home page SAP Easy Access page, select User Menu (Ctrl+F10) in the application toolbar, the menu structure will be generated for current user based on the Menu of the roles assigned to him/her.
4. Login to NWBC via the same user, the menu hierarchy should be shown correctly.
Any problem please post later.
Thanks
Amos

Is migrating open application workflows to process-controlled WFL required?

Dear forum members,
We have upgraded an SRM system from version 5.0 to 7.0 (SP 7) and we have gone live in SRM 7.0 with the old application-controlled workflows still being used for old and new documents.
We are in the process of changing the workflow to the new process-controlled (BRF) workflow and this works OK for new docments in our test systems.
Can you confirm if we MUST migrate the old workflows to the new BRF workflow when we activate the new p-c workflow into the live system?
I would prefer to have the old application-controlled workflow continue for existing document approvals and use the process-controlled workflow for new ones.
My questions are:
1. Can we use both application and process-controlled workflows together at the same time (new docs use p-c workflow, existing approvals to continue to use A-C workflow while they run down)?
2. If not, can we migrate SC n-step BADI workflow to the p-c workflow (report /SAPSRM/PR_WF_MIGRATION_CFG implies not)
Any help or advice is appreciated as always!
Thanks a lot,
Nick

hello,
we are dealing with the same issue in a srm migration from 5.0 to 7.0.
We have a copy of the production system with a lot of open workitems based on application controlled workflows.
We build up new process controlled workflows and activated those for the new shopping carts.
The report for the migration (/SAPSRM/PR_WF_MIGRATION_CFG) of open workitems seems to be not sufficient, because
- all open workitems are going to be restarted, right?
we tried to approve old woritems from the powl, that seems to work. Simultaneously brf workflow works fine.
Right now we are wondering why it should not be possible to finish the old workitems application controlled and the new ones process controlled. Do we miss something?
Has anybody experiences based on customer projects?
kind regards
Carsten

Control of brightness and contrast of HP Pavilion G4-1310au

Hello. I just got a new HP Pavilion G4-1310au. My problem is that it did not have any OS installed and so no system drivers were installed either. In the box I only got a CD that has HP manual in it and nothing else and the notebook of course, the power cord, bag, and some printed manual. I was expecting to see a System Disk CD so I could install the system drivers, but I didn't find one.
So I installed the OS and then installed the network driver which I downloaded from another computer and also the audio. My problem is that I cannot find a laucher that would help me control the brightness and contrast of the screen. I tried FN key plus F3 or F2 keys but it didn't work.
Anybody can help me how I can control the brightness and contrrast or better yet if there is a Launcher software where I can control all the features of this notebook? By the way, I don't know how to enable the bluetooth either.
Any help is much appreciated.
This question was solved.
View Solution.

You're very welcome.
You can get the latest version of the HP Support Assistant from the link below:
The download link is on the upper right side of the page (Download HP Support Assistant - Notebooks, Laptops, Netbooks)
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=reg_r1002_usen_c-001_tit...

Help: Process control - kill itself and its phater

Similar Messages

Maybe you are looking for