Help pulling off data from HD

Trying to recover data from old iMac CRT HD.
Problematic old iMac CRT System 9.2, Multimedia version. CD not functioning to burn data, OS freezes when attempting to copy off large amounts of data.
I tried booting this as FIREWIRE DRIVE, connecting with firewire 400 to System 10.4.11 MacBook firewire 400, (holding "T" rebooting), yet it just reboots/restarts -but not as Firewire drive.
Can I use a USP FLASH DRIVE in USP/1 port to pull out data from old Mac HD, or will System 9.2 require driver, will this work?
OR can I attach firewire 400 external formatted with System 10.4.x to this old iMac with System 9.2.x?
OR... can System 9.2.x publish/share to Macbook 10.4.11?
What do you suggest? I hate to go through added expense to have old HD physically removed, and pull data that way. THANKS< Mark

UncleMarky08 wrote:
Trying to recover data from old iMac CRT HD.
Problematic old iMac CRT System 9.2, Multimedia version. CD not functioning to burn data, OS freezes when attempting to copy off large amounts of data.
This is worrisome. You may have a problem with the hard drive. I suggest you try Disk First Aid.
hd > applications > utilities
I tried booting this as FIREWIRE DRIVE, connecting with firewire 400 to System 10.4.11 MacBook firewire 400, (holding "T" rebooting), yet it just reboots/restarts -but not as Firewire drive.
this should work. You may need the latest firmware to be installed. I seem to recall that the target disk mode was added via a firmware update. Do you have a firmware password?
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
Figuring out what level of firmware you have?
1) Mac OS 9.x or 8.x, you need to use the Apple System Profiler.
Apple -> Apple System Profiler
2) Open Firmware, boot into Open Firmware.
Power on your iMac while holding down commandoption+of
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US
Can I use a USP FLASH DRIVE in USP/1 port to pull out data from old Mac HD, or will System 9.2 require driver, will this work?
This worked for me. the driver is included in the extension folder. I was not able to format the flash drive with 9.2 drive utility. I suggest you format the flash drive to Mac OS standard.
OR can I attach firewire 400 external formatted with System 10.4.x to this old iMac with System 9.2.x?
You would need to have the latest firmware installed. otherwise, problems with the video display would occur.
OR... can System 9.2.x publish/share to Macbook 10.4.11?
you can set up an FTP server client.
I wasn't able to get apple's share working with Mac OS X 10.4.
Jan Hedlund wrote:
You may want to have a look at what Grant Bennet-Alder writes under this topic.
http://discussions.apple.com/thread.jspa?threadID=1603898&tstart=0
Jan
I was able to upload files by using an FTP server. I used PureFTPd Manager 1.7 with Mac OS X 10.4. this download does include the server software. I did have to create a FTP user. I had to boot the classic machine after configuring.
http://www.apple.com/downloads/macosx/networking_security/pureftpdmanager.html
I used fetch:
http://fetchsoftworks.com/downloads.html
I used version 3. Previously, I used version 4.
You can use any web browser to download from Mac OS X when you turn on Web sharing. This is how I downloaded fetch.
Robert
What do you suggest? I hate to go through added expense to have old HD physically removed, and pull data that way. THANKS< Mark</div>

Similar Messages

Need help pulling correct data from MAS90

I am trying to pull data from payroll and am not getting the correct amounts. Part of the information is for the current pay period and the other information is for year to date data. The current information is coming from one file and the year to date from another file. I can get the correct information to pull if I insert only the current period fields or year to date fields, but when I have both in the report, I don't get the correct amounts to pull. I asssume this has to do with the linking of the fields. I have played with this and can't get it to work.
Thank you,
Deb

MAS90 is an OEM partner of ours. For database connectivity issues please contact them. Once connected if you have issues designing reports then we can help.

Cs3 Indesign problem - Pulling incorrect data from an .xlsm file.. please help

Hello,
I am hoping someone can provide me some answers here, as this problem has stumped me for a couple of days now.
I am using Adobe Indesign Cs3 - and I have been pulling excel tables into the .indd file with no problem. However, I had to upragde my version of 2003 excel, to the newer 2007 version, which inlcluded having to update the base excel files to .xlsm from their previous .xls versions.
I did not change anything else with the files.. simply used 'save as' to update the files.
After the upgrade, I relinked all instances of tables for the .indd file, and all seemed to be fine. Except when I look at anything that was pulled in as a date, is now pulling in 4 years and one day behind what it is written as in the .xlsm file it is being pulled from.
It doesnt make any sense to me how Indesign can be pulling in figures differently than how they are written in the Excel file it is pulling the data from.
Hopefully this makes sense, and someone will be able to help me here
Thanks
J

Aye.. the reason I have had to upgrade the excel files is because of the column limit in the .xls format. 2003 excel files will only allow columns up until the IV limit.. and my data now goes past that.
Since Indesign seems to have a huge problem trying to draw excel data/tables from anything other than 1 worksheet in an excel file, Ive had to try and create an .xlsx or .xlsm file to give me the extra columns I need for my data.
As for changing my source files.. that would be fine. Ive tried a few things with the dates, but nothing I've tried has worked so far. It reeks of a 1904 date system problem, becuase of the exact 4 years and one day off that indesign is pulling in (if you are familar with the 1904 date setting in excel, you will undertsand what Im saying) but why indesign is pulling in different data than what is visible in the source file is beyond me.
Example, the source file has a date: July 15, 2010. Indesign is pulling in July 14, 2006.
It is really bizzare.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Pull the data from database.

Hi EveryBody,
I have a requirement in universe if the end user will select the date from (1/8/14 to 10/8/14) then pull the data from the database. but when the end user select the data more than 10 days(e.g 1/8/14 to 15/8/14 etc...) then no need to pull the data from database.
how will write the filter in the universe?
how will achieve this? please help me.
Thank you.

Hi ,
I am assuming you are giving prompt for start date and end date respectively start_date and end_date.
please see the below work around. (below is pseudo code)
1. create one dummy objects as
case when @prompt(end_date) - @prompt(start_date) <= 10 then = 1 end
Remember text used in dummy object should be same as you use it for you date prompts
2. pull this objects in where clause along with your date prompts as
dummy_object = 1
It will work as below :=
your report will be prompted for start_date and end_date .
Same values will be passed to dummy objects.
When dummy object will be executed , it will check for end_date-start_date <=10 or not.
If it is less then 10 then query will executed else it will come out as where clause is not satisfied.
Hope this answers your question :-).
Regards
Jeevan

Pull the data from Azure sql and load into the on premises data base

Hi friends,
I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
I am using Azure sync process to do that, but it will take so much time to do that..
I know that azure have some limitations, is there any other way to do this..
Please help me on this...

Hello,
Check the program...
SAPBC480_DEMO.
Check the below threads
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
Thanks
Seshu

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

Pull the data from legacy System into report and display with SAP data

Hi Friends,
My requirement is-
Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Report structure has) and finally display the records from both SAP and Legacy System by filtering duplicates.

Steps:-
Define the file path on selection screen:-
Selection screen data
    select-options   (s_)
      parameters     (p_)
      radio buttons (r_)
      checkboxes     (x_)
      pushbuttons    (b_)
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-f01.
parameter:    p_file    type text_512 obligatory.
Start-of-selection.
data : l_fname type string. " File Name
l_fname = p_file .
call function 'GUI_UPLOAD'
    exporting
      filename                = l_fname
      filetype                = 'ASC'
      has_field_separator     = '#'
    tables
      data_tab                = lt_data
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      others                  = 17.
if sy-subrc <> 0.
    message e000 with 'Unable to upload file from the PC'(t13).
endif.
lt_data is of same structure as the fields in the file.
For filtering duplicates:-
delete adjacent duplicates from lt_data.
Now display the records using either ALV or using write statements.
You can display the records in any of the way you want.

Gurus..need help in reading data from virtual infocube

Gurus,
I have to read data from an virtual infocube...I am trying to use FM RSDRI_INFOPROV_READ to read data but it doesn't work..
I am doing exactly what has been done in the demo program RSDRi_INFOPROV_READ_DEMO...
Please help me...its really URGENT...
Thanks
sam

Check out this thread....
must be helpful
Re: Read data from 0BWTC_C02 via ABAP

Pull the data from ORACLE

Hi Guru's,
I would like to know ,How to pull the Data from Oracle tables to BW.
tell me scratch onwards...
regards
sekhar ch

Hi...
In the admin workbench open the modeling tab and select Source Systems
In the right pane, right-click on Source Systems and select Create
A dialog requires you to define the type of source system. Select Database System
Enter a description for the source system
Once you accept the definition of the source system, you have to provide the following information, save and back out:
DBMS: ORA (Oracle)
User Name: Your UID
DB password: Your pwd
Conn. Info: sql*net string
Select Permanent connection if this is the case
If everything went well, you should see the new source system. When you do a right-click and ask for the DataSource overview, the first time you execute it you will be prompted to generate the application hierarchy
In order to test connectivity, right-click on the source system and select Select Database Tables
The following screen shows up. Click on the execute button
any tables or views that you have access through your UID
Select a table or view and click on Edit DataSource
To test data retrieval, click on Display table contents
Designate the application component, determine the type of DataSource (Text, Master data, or Transaction data) then generate the DataSource
with regards,
hari

Is there anyway to pull the data from an iPhone/iTunes backup file?

Is there anyway to pull the data from an iPhone/iTunes backup file so it can be read and imported into a DROID phone. Have a customer with a dead iPhone and they went out and purchased a DROID as a replacement and would like all their contacts to be imported into the DRIOD. Is there any software out there that can do this?

Here is one that can at least get at the data: iPhone Backup Extractor
There may well be others of better value. Google is your friend.
You'll probably need to do something with the data you can extract, like add it to Outlook, rather than being able to send it directly to the driod.
tt2

Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor

HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPasha

Hello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy

Sync isn't pulling any data from my old computer. I don't have that computer anymore or the recovery key. Please help

I created a sync account on my old laptop 3 weeks ago. I got a new laptop this week and I'm trying to get all of my old bookmarks and passwords. I am trying to sync the new laptop, but it isn't pulling in anything from the old account. I don't have a recovery key. Is there anything I can do?
Thanks!

Not without the Sync (recovery) key that was used to set up that account.
The sync key is used locally to encrypt the data before uploading and without this key the data can be considered as lost.
*https://support.mozilla.org/kb/ive-lost-my-firefox-sync-account-information
*https://support.mozilla.org/kb/firefox-sync-troubleshooting-and-tips

Pulling output data from .txt file

Hello, I am trying to have a program that allows a user to input shopping items into the program andhave that input go to a .txt file called shoppinglist, then after the user is finished, he/she can type no to stop entering items to the list and the program will then pull all the info entered to the .txt file and output it to the screen, creating a shooping list for the user. My problem is that I am not quite sure how to output the data from the .txt file to the screen. Here is my code.
import java.io.*; // uses the java io library for the
import java.util.*; // BufferedReader class
public class week5
public static void main(String [] args)
PrintWriter inputItems = null;
try
inputItems = new PrintWriter(new FileOutputStream("shoppinglist.txt"));
BufferedReader outputItems = null;
String line = null;
outputItems = new BufferedReader(new FileReader("shoppinglist.txt"));
line = outputItems.readLine();
outputItems.close();
catch(FileNotFoundException e)
System.out.println("File file.txt not found");
System.out.println("or could not be opened.");
catch(IOException e)
System.out.println("Error reading from file file.txt.");
System.out.println("This program will create a shopping list:");
String keepGoing = "yes";
String item = null;
Scanner keyboard = new Scanner(System.in);
for (int count = 1; count < 999 && keepGoing.equalsIgnoreCase("yes");count++)
//ask for input, write it to a file
System.out.print("Please enter item # " + count + ": ");
System.out.print("");
item = keyboard.nextLine();
inputItems.println(count + " " + item);
//ask if you want to keep going
System.out.print("Do you wish to enter more items (yes/no): ");
System.out.print("");
keepGoing = keyboard.nextLine();
System.out.println("Your shopping list contains: " + item);
System.out.print("");
inputItems.close();
} All the above does is output the last item entered by the user, not the whole shopping list. Any help is greatly appreciated.

nim_ramesh wrote:
outputItems = new BufferedReader(new FileReader("shoppinglist.txt"));
/* I think u want to print the text here so */
line = outputItems.readLine(); // Replace this line with that while loop
outputItems.close();
He hasn't even read the user input at that point.
OP, you need to sit down and think about the exact order you want to do things in, and rewrite your code in a logical straightforward manner. It looks like you just threw some code in hoping it would work, instead of coding deliberately. I'm not insulting you or anything, I know you're new to Java. I'm just trying to give you some advice. Look at your code, and ask yourself why the following line of code appears before you've even written anything to your file:
line = outputItems.readLine();

Help pulling off data from HD

Similar Messages

Maybe you are looking for