Help! R5770 Hawk - No display from wake-up

No display from wake-up (Fans, lights are on, HDD spinning...). Latest ATI CCC 11.3 installed. To get displaying on monitor, I have to long press power button to shutdown (?), then press power button to restart (?). However, Win 7 stated "Resuming windows" ...
Any idea? Thanks for your helps.
My system:
MB: ASUS P8P67 PRO (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
GPU: MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
PSU: CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Display: HP 2511x using HP supplied DVI cable.
OS: Win 7 Pro 64

Ask Asus support, this is mainboard related

Similar Messages

I Changed the Display from 60hz to 24 now no display Help, I Changed the Display from 60hz to 24 now no display Help

I am on a Mac G4 and just installed 10.5.8. I the System Preferences I selected Display and changed the display from 60 hz to 24. Now I get no display. Is there a way to revert back, or access the terminal to change the monitor back so it displays? I know I could reload but that takes a couple of hours.
Any Ideas?

Satrt in Safe Mode (Hold Shift while starting). That should allow you to restate the proper preferences in the Display preferences.
Be patient. Safe mode boots take longer.
If not, reset the PRAM:
Hold Cmd+Opt+P+R and start the computer. Hold the keys through two startup chimes and release. The machine should boot normally; settings will now be at default.
http://support.apple.com/kb/ht1379?viewlocale=it_it

G555 help: enable external display from BIOS?

Fellow G555ians, HELP!
My G555 (model 0873) does not have a backlight problem, but an entire LCD problem. i.e. the LCD does not turn on at all! My laptop is fine. Once every blue moon, when I turn it on the screen works.
I was wondering if someone could tell me the keystrokes needed to enabe EXTERNAL DISPLAY from the BIOS!
Since I can't see when I turn on the comp, I can't get into Windows, and therefore can't use the unction keys. However, I know there is a BIOS option to enable output to an external monitor hooked to the VGA port.
Can you please turn on your G555 and tell me exactly what keys you hit and when to get into the configuration part of the bios, change the display option to something other than LCD ONLY or whatever the default is, save and exit?
This would mean the world to me!
Moderator note: moved post to its own thread. Edited subject to reflect content. Veiled profanity removed.

hi KazeShin,
Welcome to the Lenovo Forums.
Here's a screenshot of the Lenovo G555 BIOS.
Spoiler (Highlight to read)
What you can try is to:
1. Press the power button and repeatedly tap F2 to get inside the BIOS.
2. From there, press the right arrow key once and press the down arrow key 9 times.
3. Power ON Display should now be highlighted. Press Enter key once and press the down arrow key once to select Auto-Selected display then press Enter.
4. Connect an external monitor via the VGA cable Press F10 to save and exit BIOS. Upon reboot, the display should automatically transfer to an external monitor.
5. If that doesn't work, press Fn+F3 to shift to an external display.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Data display from search help.

Dear All,
I create a search help from T005 table with 2 parameter LAND1 and LANDX.
I have a zempinfo table which have a field LAND1.
when I want to insert data in zempinfo table I get data for LAND1 from search help. In the meantime I want to display LANDX 's data in a screen by a DISPLAY_ITEM.
DISPLAY_ITEM is not a zempinfo table field. IT is a screen element only.
Now help me please, to display data LANDX into DISPLAY_ITEM.
Thanks
Rayhan

Pls try to understand.
Though land1 landx are same table fields. I want to use only one search help.
When I enter value in LAND1 from search help, DISPLAY_ITEM automaticaly get data crossponding value of land1 from landx.
e.g. when we create a SO by tcode VA01. in this screen we enter the MATNR value & crossponding other field display its related data.
IF any way do this pls help that.
Thanks for your attention.
Edited by: Abu Rayhan on Jul 30, 2009 5:50 AM

Questions about my MSI R5770 Hawk Radeon HD 5770 and my Dell Studio 7100

Ok, I have had this card installed for about a year now. From the beginning Catalyst Control Center had given me error messages, "Catalyst Control Centre: Host application has stopped working. Windows is checking for solutions" every time I start the machine or every time I try to use the Catalyst Control Center. This has not been a problem because I have been using a 2 monitor system using the DVI port from on and the HDMI to Display Port adapter to the second larger monitor (if I went straight HDMI I can't change the settings and I end up with a 1 inch black border around the desktop and the outer edge of the 23" monitor,) so I just worked around with the HDMI to DVI. Well now I am trying to hook up three monitors. One to the Display port through a Displayport to DVI, one to the HDMI through the HDMI to DVI and one to the Display port. No matter what I try to do through the Windows display control panel, I can not get the displayport monitor (which ever is hook to that port) to display. Windows 7 does detect all three monitors, but it will not allow me to "extend the desktop" to the third monitor and I still can't get the Catalyst Control Center to work.
I have uninstalled all files from ATI or AMD that involve the video and reinstalled the latest drivers and software, but the Catalyst Control center still is not running.
If you could help me with this it would be great. I am a graphics designer and web designer/developer and not a hardware or software tech and I have been googling and trying different possible answers since yesterday morning.
My graphics card is
MSI R5770 Hawk Radeon HD 5770
My computer is
Dell Studio XPS 7100, AMD Athlon IIX4 630 Processor 2.80 GHz
8 gb
64-bit operating system
I am attempting to hook up a LG W2361 to the HDMI through HDMI to DVI adapter (presently working) at 1920 x 1080
an LG W1952 (at 1440 x 900) through the DVI port to DVI (presently working) and
an old Samsung SyncMaster 170t to the Displayport through a the adapter (not working) monitor is detected but it will not allow the extend desktop to be applied.
Hope someone can help, thanks in advance for just reading all of this.

Just incase anyone runs into a similar problem. I figured it out.
Somehow in one of either the ATI driver updates or in a Microsoft update, my drivers and software was contaminated. I deleted all software and drivers for the card, which I had already tried several times. But this time I went into safe mode used CCcleaner in safe mode and cleared the register of all entries. I then reloaded and the Catalyst Control center and it works fine now.
The problem with the three monitors seems to be that the one hooked to the displayport, if you are using more than 2 monitors, must be hooked to an active displayport adapter. I was using a passive adapter. So either I need to buy a very expensive adapter or.....maybe a new monitor that uses displayport.
Hopefully this will help someone else having this issue.

R5770 Hawk and Win7 aero effects

Just purchased used R5770 Hawk and after installing latest drivers and catalyst panel have lost Windows7 Aero glass effects.
Replaced the card w/my previous (Nvidia 9800GT) and Aero re-appeared. Reinstalled the 5770 and don't seem to be able to get Aero.
Searched and searched and it looks like I might be the only person to experience this.
Can anyone help? Is it a setting?

Use >>Driver Fusion<< in Safe Mode to remove current VGA drivers.
Then install latest drivers from MSI: http://www.msi.com/product/vga/R5770-Hawk.html#/?div=Driver&os=Win7%2064
Try again

Characterestics is not getting displayed from ODS in Multiprovider

I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?

How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

3 displays from a G5 (is installing 2 graphics cards an option?)

Hi there,
I'm trying to set up 3 displays from my G5 with an ATI Radeon 9600 XT. Ideally two are to be mirrored and one independant. I have two 23" Cinema Displays and a cheap Philips 190CW on which I'm trying to mirror one of the Apples. I bought a 1 x 4 DVI splitter (on ebay from Taiwan) which doesn't seem to work.
My regular 2 monitor set-up which has worked perfectly is to run one Cinema Display from the ADC output on the graphics card via an ADC to DVI converter and the other from the DVI on the card. So I thought I could simply run the DVI output into this splitter and run the extra monitor from one of the outs as well as the second Cinema Display giving me the mirroring on two. But all I get is the ADC connected Cinema Display and one or the other of the DVI connected monitors - not a split.
The splitter is supposed to support 4 monitors at 1920 x 1200 but when I connect all three to the splitter it only gives me one!
I have three questions:
1) Is it just a a dodgy Splitter?
2) If so can anyone recomend one that will work or a way to do what I want?
3) Is it possible to install a second graphics card such as another ATI Radeon 9600 XT and run 3 displays from them?
I'd very much appreciate any suggestions.
Cheers GR
G5 2.5 Duel Mac OS X (10.4.8) G4 17" Powerbook 167

Thanks very much.
That does answer my question but doesn't solve my problem...
It seems to be working on all three monitors in that configuration but it doesn't really do what I need in terms of the physical placement of the Apple Displays - I need them to stay together unmirrored and the Philips monitor a few metres away mirroring one of the Apples. (I'd love to get another 23" Apple but it's 5 x the $$$). How slow in everyday terms would it be with an extra graphics card? I'm doing this for a music recording set-up.
Thanks again for your help.
Cheers GR

Internal drive for Macbook Pro 13 inch with Retina display from late 2013?

Hi everyone. After some water spillage to my new computer, the guys at the Apple Store have told me that my internal hard drive needs to be replaced. No other damage was done, thankfully. I have a Macbook Pro 13 inch with Retina Display from late 2013. The Apple genius said my current hard drive has flash storage, and that my new hard drive will need that as well as the computer requires it. Does anyone know where I can buy such a hard drive? Is it possible to buy it from Apple? I am happy to buy online or in a store (I live in Australia). Also, is this Mac Pro model difficult to take apart? I'd like to install the hard drive myself.
Thanks in advance to anyone who can help!

From the specs:
STORAGE AND MEDIA
Storage
256, 512 GB, or 1 TB flash storage
Media
Optional Apple USB SuperDrive

Problem viewing .xlsx and .xlsm file in DMS using Display from Archive Link

Hello All,
We are using IXOS as a content server for storing the documents through SAP Archive Link.
We are not storing any documents in SAP DMS.
The client has an requirement to manage .xlsx and .xlsm documents.
1. xlsx - We defined a new document class xlsx under SAP NetWeaver ..-> ArchvieLink and made the required mime and sheet settings. This allows to upload a .xlsx file to IXOS server succesfully (using Check in Archive) link.
But whenever we try to view the file using "Display from Archive", the browser gives a warning message that the file is in different format than xls. Do you want to still open (Standard Excel application message). On clicking yes, the file opens in .xls format instead of .xlsx.
The client doesn't want to change the format to .xls. What can be done to preserve the .xlsx files.
2. xlsm - Any clue as to does SAP ECC 6.0 support this file type for DMS? And if how the config settings are to be done?
I will be grateful any help.
Thanks.
Ketki

Hi Ketki,
based on your description I think that maybe SAP note 1289314 could help here and made sure that the local copy also has extension XLSX or XLSM.
Best regards,
Christoph

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Iq772 no display from monitor

Hi have a iq772 pc and there is no display from the monitor, dvd, power buttons seem to work ok, think this may be an inverter problem, however can't seem to work out how to dismantle the casing from the screen. Any ideas, many thanks.

How have you guys got on with your screen issues. I find it crazy that HP havent not take responsibility for this issue. There seems to be lots of people out there with the same issue. My unit is about 2 years old and is now completely useless. A.) I cant afford to spend £398 on a new motherboard and B.) If I could afford to, I would probably put it towards a new PC.
Any help what so ever would really be appreicated

How to display from JANUARY to Current Month(SEPTEMBER) in dual.

Hi Dudes,
I want to display months from JANUARY to Current month
here my input is sysdate,so it should display from January to sysdate month(i.e) upto september
how it is possible in a query?

Hi dudes,thanks a lot for all your help.
i would like to display all your output which i have i got in my screen
so it will be helpful for others also
SQL>select to_char(add_months(to_date('01-01-'||to_char(sysdate,'yyyy'),'dd-mm-yyyy'),level -1),'Month') months
2 from dual
3 connect by level <= ceil(months_between(trunc(sysdate),to_date('01-01-'||to_char(sysdate,'yyyy'),'dd-mm-yyy')))
4 /
MONTHS
January
SQL>select to_char(to_date(to_char('01/'||to_char(to_char(sysdate,'MM')-level+1)||'/'||to_char(sysdate,'YYYY')),'dd-mm-yyyy'),'MONTH')
2 from dual connect by level < = to_char(sysdate,'MM');
TO_CHAR(T
SEPTEMBER
SQL>select to_char(add_months(trunc(sysdate,'YYYY'),level -1),'Month')
2 from dual
3 connect by level <= ceil(months_between(trunc(sysdate),trunc(sysdate,'YYYY')));
TO_CHAR(A
January
SQL>select distinct to_char(dt,'Month') dat from
2 (
3 select dt from
4 (
5 SELECT TRUNC(SYSDATE,'y')-1+ROWNUM dt
6 FROM all_objects
7 WHERE ROWNUM <= ADD_MONTHS(TRUNC(SYSDATE,'y'),12) - TRUNC(SYSDATE,'y')
8 ) where dt between trunc(sysdate,'yyyy') and sysdate
9 ) order by to_date(dat,'Month');
DAT
January
February
March
April
May
June
July
August
September
9 rows selected.
SQL>THANKS ALL...

Help! R5770 Hawk - No display from wake-up

Similar Messages

Maybe you are looking for