Help racecar game problem

im really not that good at java and this may just be a simple structure problem or there may be no way to do what i want but i thought id just make sure before i proceed and do it another less organised way
im making a top down veiw car racing game where hte user can select different cars. i would like each car type to have a seperate class that just simply defines the varibles for that car (ie mass, length inertia etc). then a generic racingcar class that can access them.
howver the problem im having is that since each cartype class has a different name so i cant extend or implement them in my racecar class (maybe theres a way to dynamically set what a class extends/implements?)
and i cant have a varible pointing to it because id have to define one for each cartype
if you have any insight or an obvious answer im just not seeing oculd you help me please

abstract class BaseCar
   void update()
      //some logic code, including a call to getMaxSpeed()
   //definition is required in the subclass
   abstract float getMaxSpeed()
class SuperCoolFastCar extends BaseCar
   float getMaxSpeed()
      return 10000.0;
}and then in your main class
BaseCar [] theCars = new BaseCar[numCars]
theCars[0] = new SuperCoolFastCar();
theCars[1] = new SlowButGrippyCar();
//etc etc

Similar Messages

  • Online Games Problems With WRT54G Router

    Hi There ppl,
    I have a Lan House with 50 comps working, and most of my costumers are looking for online games entertainment (Cabal Online, Ragnarok, Dota, CS, 9 Dragon etc). We have an 8 Gb DSL connection and another one of the same speed for back-up (not running simultaneously at the moment). We should be having outstanding results for online gamming (and we were before installing the new router) but we are having several problems since we install a new LinkSys WRT54G router here. Our physical configuration is the modem, followed by the router, than three DLink Switches(24 ports) and my main computer. Everything cable
    What we noticed is that the Internet connection looks normal (even using the command "ping", nothing strange appears, no timed out at all!) but online games (specially the above mentioned) have an intermitent connection. (Some times they connect, some dont)... Looks like it happens usually when I have the house crowded, but already showed also with it empty.
    Another issue is that I am using the LinkSys Advisor to help identifying this problem, but I am getting even more confused, because its giving new information each time I refresh the "my network" window. Also happens when showing "My Network Settings" on the Support Tab.
    Im using Firmware 8.00.0, what I think is the newest.
    I didnt try any forwarding port issue yet, as I would like to receive more information about it (never needed to configure anything related before). Concerning the MTU value I already tryed withou any significantly result.
    Please If anyone had the same problem, or have any idea of other possible tests, i would appreciate a lot.
    Thank you and have a great day all

    Hi there Helm,
    Tks for your attention and reply to my issue!! Yesterday right after posting here (when we closed the doors and I could be able to work on it) I did get the latest one (8.00.2) and also set up manually the MTU value to 1500 (standard is automatic). I also unckeck the "anonymous internet request bock", "Multcast filter" and "Filter NAT forwarding", all of them were checked as standard. I also checked the "HTTPS Internet Access" (standard is only HTTP).
    At a first moment I could get a very low sensitive better result (but the Lan was closed, so I had the entire 8Gb for my requests). I came back to work right now, and we have about 30 ppl in, mostly using the Internet, MSN and so... I am trying yo connect to Cabal Online, and GG-Esports (Warcraft, Dota) both of them giving the same problems as always... I am really getting tired and disapointed with LinkSys, I really though I would have much more than I am having right now.
    Anyway I gonna keep trying each night to see what I cant get. I do post here If I find any solution (or if I really decided to move to another brand)
    Thank you a lot and have a great night out there
    GT

  • Help with FPS problem please

    so I've been using my GF4 ti 4200 64mb for about 3 months, and receiving more or less 100 fps constant. I'm playing counter-strike, and getting a nice fps, and then decide it's getting late so I quit CS, and leave my computer. The next day when I go to play cs (or any game for that matter) my fps barely reaches 50, and the game freezes up at regular intervals (about every 5 seconds). At other times my fps will drop to 6-10 just from me shooting, or being shot. Any help would be appreciated -- thx in advance-
    -matt

    Some general advice that could apply here:
    - you use 98. Try rebooting every time you have that kind of problem. 98 is notorious for flaky memory management.
    - Try to fix your swap file size. Something like 384MB or 512MB seems reasonnable. That should help your defrag problem. To solve it completely, disable the virtual memory, reboot, defrag, enable, reboot.
    - verify with a ctrl+alt+del that nothing is running. Having an antivirus or any memory resident program could solve that.
    - did you change anything recently? what kind of prog did you install? any driver change? A small hassle that could help: reinstal directx, reinstal video drivers. If you already changed video drivers recently, just try reinstalling directx.
    I'm not surprised that MSI is not responding. This is not directly linked to their hardware and their support is already overwhelmed. The forum is here to supply the answer.
    Hope it helps,
    Frenchy

  • My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

    My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
    I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

    Hello Salmomma,
    Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac.  I recommend following the steps in the tutorial below for an issue like this:
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/
    Additionally, you can delete music directly from the iPhone by swiping the song:
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • How do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

    how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

    Welcome to Apple Support Communities
    When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
    To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it

  • I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    Is this happing because the external is formatted to PC and not mac?
    Yes that is correct.
    Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
    If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
    You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
    Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
    regards

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • Help with systemd problems/reply to closed thread

    @Everyone; as the previopus topic was closed, I am opening a new one here, partly to reply to some things that was said to me in the previous thread/topic (and I do not like to leave people hanging), but mainly to try and get some help with my systemd config (that I was not able to find help with in the wiki or manpages).
    @czubek; eww, that sounds rather similiar to some other operating systems I've heard of (not just, but obviously including, windows)... For me, subjectively, that is not very attractive, as being able to have a single application do a single thing, and then mixing and matching as I personally see fit is a great thing.
    @tomegun: I can indeed see your point, but if I made direct quotes on all the things I reply too, my posts would reach biblical proportions.
    Mmm-hmm, I do indeed know of "the Arch Way"; however, the system that you expose can be of varying complexity as well, and I found that the system that was presented to me by way of Sysvinit/initscripts was a way simpler system than that presented to me by systemd.
    Indeed, and I do like that; I enjoy knowing how my system works and learning more about it; however, the truth is that reading manpages and the wiki isn't always enough. And I use the numbers instead of letters in certain places as a jest, please, do not get offended by that; if you have to, get offended by my opinions.
    Ah, I have now scanned the wiki, the manpages, and have already faced problems. While part of me is saddened by this fact (as I was hoping for a smooth transition to systemd), part of me is glad that I can at least prove that everything isn't quite as simple as some people would make it out to be. More on this later in this post, as I do need help with the problems I have faced.
    And I wouldn't say that the new and old way are equally trivial, as I immediatley faced problems with "the new way". More on this later.
    Ok, I find that if the debate is polarized, then there is nothing wrong with describing it as such. I spell what I see.
    Oh my... Ignored as a matter of principle? I would say that that is an excellent way to stagnate; by that logic, moviemakers, gamemakers etcetera should ignore any and all criticism they recieve, as the critics are not contributing.... Wouldn't that lead to a complete halt in development? Isn't criticism (so long as it is constructive, obviously) a key component of (media/software) evolution?
    Ah, I see, then I  misunderstood the current state of the install media
    "Some adjustements"... Well, I guess we'll have to see how that goes, then. Hopefully it'll be smooth.
    @Everyone; Awebb possesses stunning accuracy as far as his observations go.
    @zb3; My point exactly.
    @tomegun; I believe you to be wrong; complaining (but not whining) is the first step towards improvement, as I think that I and zb3 has shown.
    Further, your last point (where you talk about "deep understanding of Y" and whatnot) is basically saying that only devs and programmers can contribute, so zb3's observation would be correct.
    Also, making suggestions is part of constructive criticism; you can do that even if you can't code, e.g. by saying "X works badly because it makes Y crash; couldn't we replace X with something akin to Z?". This is a valid point even if you have no intricate understanding of X, Y or Z, and if it is impossible to replace X for one reason or the other, it's not hard to reply with "Replacing X is impossible because of reason Q", and then see if someone can solve reason Q etcetera.
    zb3's example is obviously helping; for one, it would allow people to know taht they can't boot with systemd in certain cases, or that installing/runing systemd can break their system. I would consider that rather important information.
    @Everyone; Now then, to see if I can (or rather, if I can get help to) shed some light on some problems I've been having.
    My transition to systemd went pretty smooth (besides the fact that I couldn't use 'systemctl' to set anything, and neither duckduckgo nor any posts in the forums could help me (the error I continously got was "Failed to issue method call: Launch helper exited with unknown return code 1") and that there are no manpages/tips on how to configure the files for "localtime" and "adjtime", which would've been good considering some syntax have changed) to about halfway through, to the point where I was supposed to start using systemd for my daemons.
    Now then, to the main problem; first, I tried running
    "systemctl enable syslog-ng.service"
    and got the following message;
    "ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
    ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
    Since it doesn't exclusively say that something went wrong (at least as far as I can understand), I pondered the message a bit, but moved on to try and start dbus by issuing
    "systemctl enable dbus.service",
    to which I got the reply
    "The unit files have no [Install] section. They are not meant to be enabled using systemctl."
    This I can only assume is an error message of some sort, especially seeing as it says "not meant to be enabled using systemctl", but the wiki rather explicitly states that that is what I am supposed to do.
    I dare not move on (or attempt to start other daemons) without further advice, as I fear I might break my system. Any ideas as to how to solve this would be greatly appreciated.

    tcmdvm wrote:
    The message;
    "ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
    ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
    indicates that running "systemctl enable syslog.service" is now enabled.
    If you try running sytemtctl enable <whatever>.service and get
    "The unit files have no [Install] section. They are not meant to be enabled using systemctl." means there is no <whatever>.service file available to enable.
    The dbus.service as far as I know is already enabled when installing systemd and doesn't require any action.
    Ah, right, systemd is chatty (I'm of the old skool; if nothing is/goes wrong, a program should keep quiet).
    Oh ok, then I should dare more on.
    ZekeSulastin wrote:To be a bit more precise, it means the service is there but it's only used as a dependency for something else; the [Install] section of the file is what tells systemctl where to link it and such.  Also, where exactly in the wiki were you told explicitly to 'systemctl enable dbus.service'?  I can easily point you to the sections in both installation guides that tell you how to set things like /etc/localtime et. al (also `man 7 archlinux`), but not the one that said to manually enable dbus.
    Ah, I see; and well, I was told right here, going from the top, to "Enable Daemons formerly listed in rc.conf [...] For a translation of the daemons from /etc/rc.conf to systemd services, see: List of Daemons and Services.", and, using the list, dbus is mentioned there, as you can see. Since I started from the top, I did not know that you didn't need to enable that service. Perhaps it could be added to the descriptions of the relevant services in the Wiki which ones are autostarted?
    ZekeSulastin wrote:Lastly, I don't think trying to continue conversations from a closed thread is a very good idea, let alone doing it in a giant undivided wall of text that makes it quite difficult to pick out much any single topic.
    Meh, I directly refer to the relevant people, they can easily see their own old posts in the previous thread, etcetera... I think te ones who have something to say will be able to find my replies to their previous statements (or so I hope). For now, as everyone can see, I quote stuff (but man might I make some huge posts if I ever post again in the future, if I quote what I reply to).
    fsckd wrote:This is not really a technical support subforum. Moving from Arch Discussion to Newbie Corner.
    Ah ok, thanks (or perhaps a cautious thanks? Moving it to "newbie corner" might, after all, be a subtle insult...).
    tomegun wrote:It is not really possible to follow your message as you don't quote what you are replying to. Moreover, as the thread was closed I think that means we should stop the discussion ;-)
    Hmm, I think it means cop-out for lack or proper arguments/responses... But ok, I'll let it slide, for now (mainly as I can't do much else).
    tomegun wrote:You are not meant to enable dbus.service as it is enabled unconditionally. To check the enabled/disabled state of your services try "systemctl list-unit-files". "static" means that you are not supposed to enabled/disable it.
    Ah ok, thank you. Now, having abandoned all hope, I'll start configuring again and see how it goes... May the void protect me. If I die, grieve not for me, but remember me in the fight against hard-to-configure applications.
    (edit/addon)
    Actually, what am I supposed to do with "hwclock"? the List of Daemons only says that I shouldn't run that in tandem with ntpd, but I'm not running ntpd, so... How do I get hwclock with systemd?
    Edited for additional question.
    Last edited by incassum (2012-11-07 08:44:42)

  • [ETL]Could you please help with a problem accessing UML stereotype attributes ?

    Hi all,
    Could you please help with a problem accessing UML stereotype attributes and their values ?
    Here is the description :
    -I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
    -Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
    -Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
    s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
    -However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
    Please help
    Thank you

    Hi Dimitris,
    Thank you , a minimal example is provided now.
    Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
    Instructions for reproducing the problem :
    1-Run the uml2etl.etl transformation with the supplied launch configuration.
    2-Open lqn.model.
    There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
    The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
    Thank you
    Mana

  • Titanium Fatal1ty Pro SPDIF game problem

    (Titanium Fatalty Pro SPDIF game problem hi all,
    sorry if this issue reported in the past i but i could not get any answer on any relati've posts, the terminology was so complicated
    i buy?a new pc with a Titanium Fatalty Pro sound card, i use Vista sp2 x64, the sound card is connected to my external amplifier with SPDIF out in order to get surround sound for my movies and my games and here is my problem
    any movies format with surround sound play perfect with out any problem any kind of movie DVD, dvix, mkv?files?etc
    but non of the games i play?use the surround system, why is that? is any?kind of special settings needed to be done? how is possible to get surround to movies and not to the games?
    thanks you all for your time ?

    ,Re: Titanium Fatalty Pro SPDIF game problem? this is really coincidence - I just posted on the very same topic 5 minutes ago.
    for games just go to the Console Entertainment mode > Encoder > Dolby Digital. Although this is not documented I believe what happens is that the sound card encodes the 6 digital channels onto Dolby Digital mode and transfers this over SPDIF. Kok-Choy actually recommend using the standard analogue cables (and he has a point as you are actually upcoding an existing game signal onto Dolby so that your digital receiver can then decode this down to 6 channels - seems a pretty useless overhead)
    for video - I am curious to know what you do - I can either get 96/24 bits on the display of my z5500 with a direct signal but the z5500 receiver then tells me that this signal is only in dolby ProLogic II (and not DD or DTS). As alternati've I use again the encoder and have to select for EACH FILM WHAT IS BEST DOLBY DIGITAL OR DTS. Pls explain what settings you use.
    thanks

  • Powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem.  Now when I open Keynote on my iPad there is nothing.  I could use some help with this problem.

    powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem.  Now when I open Keynote on my iPad there is nothing.  I could use some help with this problem.

    Morning AndreD86,
    Thanks for using Apple Support Communities.
    These articles explain exactly what is backed up by using their method.
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    and
    iCloud: Backup and restore overview
    http://support.apple.com/kb/ht4859
    Also we want to double-click the Home button and swipe the Task Bar to the right.
    Then make sure the button on the far left of Task Bar is not muted.
    Best of luck,
    Mario

  • "Skype can't connect. Get help fixing this problem...

    Well, I downloaded Skype. Then, i sign in to my account. And an error pops up on my computer screen that said "Skype can't connect. Get help fixing this problem". Someone help me fix this?
    Solved!
    Go to Solution.

    Make sure you are running the latest updates both for Windows and Skype. See here for help on getting those: https://support.skype.com/en/faq/FA34438/why-should-i-update-my-skype-version-what-do-i-need-to-do-t...
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • HT201413 Help! Having problem to restore my iPhone 4. Who can help?  Error (-1)

    Help! Having problem to restore my iPhone 4. Can anyone help? I have an erro message, (-1)

    Error 1 or -1
    This may indicate a hardware issue with your device.
    Follow Troubleshooting security software issues, and restore your device on a different known-good computer.
    If the errors persist on another computer, the device may need service.

  • Help solve the problem after restor iphone 5 ios 7 asks email

    Help solve the problem after restor iphone 5 ios 7 asks apple ID
    I Forgot apple ID

    Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

Maybe you are looking for

  • Drag and drop not working in PE 12, MacOS 10.7.5 (Lion)

    I "copied" the icon for the Photoshop Elements 12 Editor to the dock.  When I drag and drop a photo icon (example, JPG or NEF) to the Elements Editor icon in the dock, nothing happens -- Elements does not open.  The photo icon just "pops" back to the

  • Slow startup CC&B 2.3.1

    Anyone else out there seeing an extremely slow startup time with CC&B 2.3.1 (using RH Linux here, but have seen it on Windows servers as well, so I'm not so sure OS is really important here, but wanted to note it just in case). It shows the following

  • TS3276 After updating software yesterday, noticed that sent emails are not showing up in Sent Folder for one of my accounts.

    After updating software yesterday, noticed that sent emails are not showing up in Sent Folder?

  • Restoring iPhone 6 backup from iTunes - 12.1.2.27, 64-bit

    Yesterday I backed up my iPhone to iTunes.  Because I had restored from Verizon Cloud only 8 of my Contacts were showing! Today I restored the iTunes backup and my full Contacts were visible...  for SECONDS!  They all showed then the screen blinked a

  • Windows Fax and Scan

      Hi, My Computer is a Lenovo G50 (windows 8.1) and my Printer/Scanner is a HP Deskjet F4580 (F4580)    All – in – one Series. The deskjet is connected wirelessly to my computer and prints documents OK but will not scan documents using 'Windows Fax a