Help re error message - file not found!

I have recently transferred my library from my old PC to a new laptop. This seemed to go ok and the files are showing up in my new library. However I have just tried to add some files to my iPhone and I am now getting an error message when I try to upload them saying the files are not found. Help!

Moving a library from machine to another can require some preparation if it is to go smoothly.
If you still have access to a working library on the original computer I can help you do the transfer again. Alternatively, as long as the files are organized within a media folder in a way that is vaguley consistent with iTunes, i.e. folders for artists, with subfolders for albums, then my FindTracks script might be able to relink the files.
tt2

Similar Messages

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

Getting error message file not found unable to sync to ipod

90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

+all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
I suspect after itunes finds it again, it will load to your ipod.
Is this music on an external HD?

Install OCS Single-error message "File not found \onebox\onebox_stg.rsp"

I am trying to install OCS Single Box on a Win2000Server and I get this message before as soon as installation begins:
"File not found \onebox\onebox_stg.rsp"
The software was downloaded yesterday from OTN. It's version 9.0.3.1.0. It's the second time I downloaded it and I got the same error previously. I moved the Disk1 dir to the root dir and that didn't help either.

I installed the single box on Linux and had to start setup.sh (so search for something like setup.bat) instead of starting runInstaller
I also had to define the environment variables TMP and TEMPDIR in order to get the setup starting.
HTH
Jens

Error message: file not found

I have an extensive list of music that has not been synced for a while on my laptop. I have since upgraded iTunes. Now I cannot play any of the music stored on the laptop, though the list is still there. The error message says that the file is not found.
If I sync my iPod with the laptop, will that restore the info on the laptop or wipe out my iPod list?

Thank you Tom...
Can you see the text beneath each Demo picture? I can't.... and I only know that it is there where you have to click to play because I built it... but otherwise..
Lastly, is it not possible to link the mp3 files to the pictures? rather than the text... would be cool if people can click on the pictures to play the demos
Are you familiar with playtagger? I followed the instructions from a previous post, and expecting the little play symbols to appear next to each mp3 text link, they appeared at the top of the page.... not very useful. How does one edit placement of the play trinagles?
cheers
K

I keep getting error message file not found 404 when I attempt to combine files

I have used the adobe cloud many times to combine files, today it is not working. Just keep getting error message.
Please advise!
Thanks,

Hi iabrad,
I'm sorry to hear that you're running into problems with the Acrobat.com website today. Let's start with this:
Log out, clear the browser cache, and try logging in to https://cloud.acrobat.com/combinepdf
Try a different web browser. For a list of supported browsers, see System requirements | Acrobat.com
If that doesn't do the trick, let us know (and please tell us what browser/OS you're using, and if the error occurs regardless of what files you try to combine--if you even get the far in the process!).
Best,
Sara

Error code "File not found Result code = -43" PLEASE HELP!

I keep getting this error message: "File not found Result code = -43" when trying to load instruments from the media tab. Does anyone know why this is happening and know how to fix this problem? I'm in the middle of a project and need help! Thanks.

So, I've narrowed down the problem to happening with the following steps (could someone possibly try this and see if the same problem is happening?)
If I load an instrument track and its blank and select a GARAGEBAND loop from the media list, I get the error message.
If I load a new instrument track and select any other instrument from the media list (besides a Garageband instrument) everything loads fine, AND THEN if I select a Garageband instrument from the list, it loads fine with no error.
If I select "No plug-in" in the channel strip after this, and try to load a Garageband loop, I get the error message and all other instruments from the media lists fail to load until I select "no-plugin" again from the channel strip and select an instrument from the media list BESIDES a Garageband instrument and then go from there (and can then load a Garageband instrument).
Is anything like this happening to anyone else? Does anyone have any ideas why this would be happening?

Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi. The program is built so a file dialog will pop up and ask for the destination of the file. Eventhough there is a file in the specified directory, an error is returned. Running open file+.vi by itself returns no error with the same file designation. Any clues?

noviceak,
Welcome to the NI Discussion Forums.
I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi). I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file? Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder. You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly. While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
I hope this helps and again, welcome to the community.
Regards,
Simon H
Applications Engineer
National Instruments
http://www.ni.com/support/
Message Edited by Simon H on 01-18-2007 08:01 PM
Message Edited by Simon H on 01-18-2007 08:03 PM
Attachments:
LV4 File Dialog.png ‏3 KB

Solaris 10 boot error 15 file not found

During a reboot to one of our solaris 10 servers when it reboots it comes up with this error message
Findroot (pool_rpool,0,a)
     Filesystem type is zfs, partition type 0xbf
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
loading '/platform/i86pc/multiboot -B $ZFS-BootFS' ....
Error 15: File not found
press any key to continue...
The grub file menu.lst content is as follows
#pragma ident   "@(#)menu.lst   1.2     10/06/11 SMI"
default 0
timeout 10
# Uncomment the following line to enable GRUB splashimage on console
splashimage /boot/grub/splash.xpm.gz
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Oracle Solaris 10 1/13 s10x_u11wos_24a X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
#---------------------END BOOTADM--------------------
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot -s
module /boot/amd64/x86.miniroot-safe
#---------------------END BOOTADM--------------------
During a shell session using a recovery disk i mount the rpool to /a , if I do a zpool status it comes back that rpool mirror-0 with both disks are online
rpool          ONLINE
mirror-0      ONLINE
c0t0d0s0      ONLINE
c0t1d0s0      ONLINE
However if I do a zpool import it shows
rpool          UNAVAIL     insufficient replicas
mirror-0     UNAVAIL     insufficient replicas
     c0t0d0s0 FAULTED   corrupted data
     c0t1d0s8 UNAVAIL    corrupted data
This is highly confusing
Any help would be much appreciated

What's confusing to me is that the second disk in this mirrored root pool shows c0t1d0s0 in one output and c0t1d0s8 is another output. I hope this is a typo. Otherwise, you need to find out why this device path changed. Its look like the primary disk is faulted. FMA will tell you if the disk is faulted and whether the second disk's device path changed. You will have to boot from media or an install server.
Thanks, Cindy

I try to boot the old T2150CDT - error message "sector not found reading drive C"

Hi,
I came by one of these and am trying to fire it up, but I keep getting the message, "sector not found reading drive C". I get this message right after the windows 98 logo appears.
Problem is that I'm limited in what I can do, because I have no floppy drive and dos doesn't recognize the CD Rom drive (drivers missing); although I can hear it during boot up.
So I took the HDD out and pasted the windows 98 installation files into it; then tried to reinstall, but I again get the "sector not found reading drive C" message. Is the drive too large, (It's about 2.1 gigs.)
Would installing the correct drivers for the CD Rom allow me to install from a CD?
this usually works
Thanks,
john

As far as I know the error message; sector not found reading drive C" appears because of these three different reasons:
- physical HDD fault
- corrupted HDD file system
- bad RAM
In first case you should try to format the whole HDD and should try to install the new OS.
If it will not help, the chances are that the HDD malfunctions and must be replaced.

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Error 15 file not found.

I was able to install arch linux on a 2 GB flash drive. But I cannot boot into arch linux from the grub menu. I greeted by a message like "error 15 file not found"
my menu.lst file looks like
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
/etc/fstab file looks like
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
#UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
#UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
#UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
#UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
and result of #blikd is
/dev/sda1: UUID="edc30674-5e24-46ae-865c-647b5af6a1ca" TYPE="ext4"
/dev/sda5: UUID="8045e664-17ad-4bfd-8b5e-56d7f17fbcdd" TYPE="swap"
/dev/sdb1: UUID="aae9fb61-b5ec-40b5-a3dd-232c9a77f29b" TYPE="ext2"
/dev/sdb2: UUID="15eb5a8a-dddc-4b28-8183-f81d450b78d5" TYPE="swap"
/dev/sdb3: UUID="9157e8a3-c1bd-499a-95fe-524cd9c07d0e" TYPE="ext3"
/dev/sdb4: UUID="f1a9a9ad-8344-4eb5-be91-1af155c756e4" TYPE="ext3"

Here is the result of my fdisk -l /dev/sdb
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 100 102384 83 Linux
/dev/sdb2 101 356 262144 82 Linux swap / Solaris
/dev/sdb3 357 1533 1205248 83 Linux
/dev/sdb4 1534 1926 402432 83 Linux
Last edited by manish411 (2012-01-14 05:24:14)

Run-time error 53 File not found (makes BI Publisher quite unuseable!)

Upgraded to BIP v 10.1.3.3.2
Open a template with the template builder
Load a source XML file
Proceed to choose Insert-> Field....
Microsoft message pops up:
Microsoft Visual Basic
Run-time error '53':
File Not Found.
This error, according to Microsoft and other technical sources SHOULD actually tell you what the file is that isn't found, however when run through the template builder, it never tells you any file name, just the above error message!
I saw one other post on this forum about this problem, and it was related to the Java Home, so I went to TOOLS-> OPTIONS and my java home there is:
C:\Program Files\Java\jre1.5.0_12
So this should be high enough JRE version.
ANy suggestions? What file or *.DLL can it not find? We have many people at a client (and me!) that have this issue.
-Greg

Pradeep,
I am not trying to utilize the desktop template builder to log onto BIP enterprise.
I am using it in an E-business suite environment, not a standalone BIP enterprise reporting environment. I simply use it right now to develop templates when I have valid XML to work with.
Many other features are working, but any features that seem to be new such as repeating group, conditional region, conditional format, the insert field palet, among others.
ANY feature that requires a .net service to be kicked off works only 10% of the time.

Help re error message - file not found!

Similar Messages

Maybe you are looking for