Help re LJ 1505 problem printing transparencies
I am trying to print transparencies on my 1505 and need them to be solid black as they are used as final artwork for screen printing on card and material.
The artwork is created in Photoshop/Ilustrator using a PC or a Mac. But every print regardless of the transparency stock I use
is not solid black and is at best dark grey. This is no good for creating screens as it lets to much light through.
I have allowed Photoshop to color manage and Printer to do the same but get same grey printout.
Anybody got tips, ideas or technique for getting solid black from this printer.
Thanks
Thank you for your ideas. I will try them when I get back home later today. I have tried printing directly from firefox in windows and that has worked fine with the work Laser printer. (I am more and more confused).
I kept trying last night and I believe the fundamental problem is getting the Photosmart P1000 to print landscape !! I have been using the recommended driver; but perhaps I should try one of the others.
Similar Messages
-
Help please it is a printing problem through airport express from pc
Sorry I'm new on here too but I didn't get help with my last problem at all but I was able to figured it out on my own. No luck with the following problem though.
Here is the problem My printer works I can print from my Mac but not from my pc. It recognizes it and it says printing and the printer actually uses a page but it comes out clean/clear. I can print to this printer from my mac like I said but not from my pc. I have rebooted, restarted and deleted and installed the printer back again, but still nothing. I mean it works, it just doesn't print anything on the page. Just a blank page. The printer is connected to an airport express and it works and it has been restarted and everything. The printer was jump started too. It works great with my mac but my pc can not print to it. I have another printer connected to my airport extreme base and that one can be used by both my mac and my pc. It works just fine. So Why won't this other printer work with my pc but yes with my mac. Both printers are connected to the network through AEBS and AX through usb, Not directly to any computers. Both printers are HP photosmart allinone 2575 working just fine with both and HP 6210 officejet all in one printer working only with the mac. Remember it is responsive with my pc and it says printing and it actually grabs a page and prints it out blank. Oh and it does have ink, I have made sure.
Thank you so much for taking the time to look at my post. and I'm kinda new so Forgive me if I repeated myself too much, to get the message across. Any help would be greatly appreciated. Thanks once again.I have used the website and attempted to add the printer manually. However, it still says "collecting printer status" under port 9100, or "printer offline" for port 9101. Do you have any other ideas? It works flawlessly on my wife's apple laptop.
Message was edited by: Mizzay -
Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
MarlenHello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks. -
hi,
I want to print an image using JAI(Java Advance Imaging). I have something which scales the image
first and then prints it out. It prints the image, but the resolution of the Image is horrible.
The image comes out so blury it hard to see. Can anybody help me with this problem.
Any help is always appreciated.
Here is the Code.
import java.util.*;
import java.awt.*;
import java.awt.geom.*;
import java.awt.image.*;
import java.awt.print.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.awt.image.renderable.ParameterBlock;
import javax.swing.RepaintManager;
* <p>Title: </p>
* <p>Description: </p>
* <p>Copyright: Copyright (c) 2002</p>
* <p>Company: </p>
* @author unascribed
* @version 1.0
public class JAIImagePrint implements Printable {
protected RenderedImage renderedImage;
protected int imageWidth, imageHeight;
protected Point printLoc = new Point(0,0);
public void setPrintLocation(Point d) {
printLoc = d;
public Point getPrintLocation() {
return printLoc;
public void loadAndPrint(String filename){
RenderedOp renderedOp = JAI.create("fileload", filename);
renderedImage = renderedOp.createInstance();
print();
protected void print() {
PrinterJob pj = PrinterJob.getPrinterJob().getPrinterJob();
pj.setPrintable(this);
pj.printDialog();
try{
pj.print();
}catch(Exception e){System.out.println(e);}
public int print(Graphics g, PageFormat f, int pageIndex){
if(pageIndex >= 1) return Printable.NO_SUCH_PAGE;
Graphics2D g2d = (Graphics2D) g;
g2d.translate(f.getImageableX(), f.getImageableY());
if(renderedImage != null){
double scale = Math.min(f.getImageableWidth()/ renderedImage.getWidth(), f.getImageableHeight()/renderedImage.getHeight());
Interpolation interp = Interpolation.getInstance(Interpolation.INTERP_BICUBIC);
ParameterBlock params = new ParameterBlock();
params.addSource(renderedImage);
params.add(new Float(scale));
params.add(new Float(scale));
params.add(0.0F);
params.add(0.0F);
params.add(interp);
PlanarImage image = JAI.create("scale",params);
printImage(g2d, image);
return Printable.PAGE_EXISTS;
} else return Printable.NO_SUCH_PAGE;
public void printImage(Graphics2D g2d, RenderedImage image){
if((image == null)|| (g2d == null)) return;
int x = printLoc.x;
int y = printLoc.y;
AffineTransform at = new AffineTransform();
at.translate(x,y);
g2d.drawRenderedImage(image,at);I have run into the same problem. From what I have seen the Image object is only capable of handling a pixel based picture. A pixel based picture only has a resolution of 72 dots per inch, where as most printers have a much higher resolution.
I haven't found a way around it yet. But I am looking at some alternative methods. -
Problem printing Adobe Reader documents (PDF). Text files and MS-WORD print fine. Help?
I cannot get my ePrint to work with Adobe Acrobat (ReaderX) and pdf files. I get a "Failed to send" message. I have NO problems printing text or MS-WORD files so I know my Internet, printer, and local intranet are working. Help?
When you say the bottom right of you screen, are you talking about your computer screen? If you are then, you are not using ePrint, which is fine. You may just be having some wireless network issues. Try this. When it asks for the DNS information on step six, enter Google's public DNS (Preferred = 8.8.8.8 | Alt = 8.8.4.4). If that does not help, let me know and I will see what I can do.
By the way, if you are emailing the documents to your printer, which is ePrint, you are right about the file size limit, however, the limit is 5 MB. Most likely you are not Creating PDF or Docx documents that are anywhere near that size, so that should not be the issue if you are using ePrint. If you are using ePrint, try turning the router and printer off. Turn the router on and let it become stable. Turn the printer back on. Turn off and on any other devices that are connected to your wireless network as well, so they can re-establish network connection. Now retry the ePrint job. If that does not work, let me know.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Having problem printing to hp officejet pro 8500 since updated to yosemite. any help please?
I am having problem printing to Hp Officejet pro 8500 printer, it says it is in use. I never had any problem until Yosemite update. Any ideas please?
I had the same problem with a HP 4000 laser jet & SL, this is how I solved it
http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html -
Re: How do I print transparencies?
OK. We got a new HP notebook with Windows 8 and can no longer print transparencies on my HP Photsmart Premium printer. It seems as if the printer does not recognize the sensing strip and I do not know which kind of paper to choose from the print menu. We have been on the phone with the HP help line and they don't seem to know either. Any suggestions? Right now the transparency goes straight through the printer and then printing begins on the next plain paper page. HELP!!!
@Dltc The printer does not seem to have Transparency media as a selection in the driver, I would suggest "Other specialty media". Make sure to feed the transparency media with the strip facing the back of the printer (strip first into the tray) and face up.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I used to be able to print my bank statements directly from the website to my printer. Now the print program sends the file to a file with a "cgi" extension and saves it on my desktop but as an Adobe file. When i open it to print, Adobe says it is not supported or corrupt. running windows 7 on PC.
mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me. -
Problem printing out to a parallelport printer
Hello, I am using the javax.comm.*; package and I am having problems
printing to the parallelport.
Well, it prints out the string but the problem is that the light for paper feed
starts blinking eventhough there is paper , once I click the paper feed button
the printer then prints out the string.
So, basically, everything is ok, apart from that I have to press the paper feed
button for each time I want to print something.
There is an error in my code somewhere, but as I am new to port communications I cannot understand what to do.
Below is my code, please help.
Thanks!
public void print(String s){
Enumeration ports;
CommPortIdentifier portId;
try{
portId = CommPortIdentifier.getPortIdentifier("LPT1");
addPort(portId,s);
}catch (NoSuchPortException e){
e.printStackTrace();
public static void addPort(CommPortIdentifier portId,String s){
try{
ParallelPort port = (ParallelPort)portId.open("LPT1",2000);
/*port.notifyOnError(true);
port.notifyOnBuffer(true);
port.addEventListener(new ParallelPortEventListener(){
public void parallelEvent(ParallelPortEvent ppe){
System.out.println(ppe.toString());
System.out.println("An event has occured");
try{
OutputStream os = port.getOutputStream();
if(os == null){
System.out.println("Os is null");
else{
os.write(s.getBytes());
//os.flush();
catch(Exception eis){
eis.printStackTrace();
port.close();
catch(PortInUseException e){
System.out.println(e.currentOwner);
e.printStackTrace();
catch(Exception ecl){
ecl.printStackTrace();
}Of course this class imports :
import java.util.Enumeration;
import javax.comm.*;
import javax.comm.CommPort;
import javax.comm.CommPortIdentifier;
import javax.comm.ParallelPort;
import javax.comm.NoSuchPortException;
import javax.comm.PortInUseException;
import java.io.*;Wow - I wonder how the OP thought that the
Developers Home > Developer Forums > Java Forums >
Java Mobility Forums > Consumer and Commerce >Consumer and Commerce General >
Forum was a correct choice for this problem??It's the same logic that leads one to believe that being new to port communications omits them from the responsibility of using general troubleshooting techniques to isolate/identify a problem.
This logic often leads to obscure questions also, sadly. -
New problem printing from InDesign CS4 in Lion
After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me. -
Possible solution for problems printing with ICC profiles - esp. R2400
(N.B. This is long because I've decided to go in to details about the background of the problem etc.. Also note that whilst my experience is with the Epson R2400, anyone with problems printing using ICC profiles in Aperture may find this post helpful, as will be explained further down the post.)
Ok, here's the situation. I've been an Aperture user for over a year, and an R2400 owner for half a year. In that time I have done a huge amount of experimenting, but I've never managed to get Aperture to work perfectly with Epson's 'premium' R2400 ICC profiles - the ones you can download from their site which are better than the ones provided 'in the box'. This hasn't been too big a deal because, in fact, the R2400 does a rather good job just set to 'System Managed' in Aperture and 'Epson Vivid' with a gamma of 1.8 in the printer driver. Nevertheless, it really annoyed me that something that should work wasn't, which is why I've spent a lot of time trying to figure out what's going on. Having said that, I have come across a method which will give you pretty good prints out of your Epson R2400 using the premium profiles in Aperture - it's not perfect, but it's the best you're going to get if you want to use those profiles in Aperture. I understand the words 'it's not perfect' aren't what photography experts would probably want to hear, however, I have seen a few anguished posts from R2400 owners in here before, so I think some people may find it useful.
The whole reason why Aperture is hopeless at using the R2400's premium profiles is because - unusually - their default rendering intent is set to 'relative colorimetric' rather than 'perceptual'. You might say 'but that's good - it means you get more accurate colours!', and if you do, you're right... however, there's a snag. To get an image to reproduce well using Epson's premium profiles and relative colorimetric rendering, you really need to use black point compensation. This is where the trouble lies: Aperture's black point compensation is diabolical to the point of being unusable when used with relative colorimetric rendering - I feel I need to be awarded compensation every time I've ever tempted to use the setting. So because BPC in Aperture is unusable, that effectively makes the premium profiles unusable too, because Aperture always uses the default rendering intent specified in the profile.
The solution? Use perceptual rendering instead. Ok, so you can't change the rendering intent in Aperture, which makes that sound a tad difficult. However, as I said in the above paragraph, Aperture always obeys the default rendering intent specified in the profile... so you can see where we're going with this: we need to change the ICC profiles' default rendering intent from 'relative colorimetric' to 'perceptual'. I did some digging around and found one or two expensive pieces of software that could do that... but then I found that, lo and behold, the Mac OS has a command-line utility which can do the job for us, for precisely £0.00. It's called SIPS or 'Scriptable Image Processing System', and you can find out some information about it here: http://developer.apple.com/technotes/tn/tn2035.html#TNTAG58 For those who don't like reading technical jargon however, here's what you need to do to convert a profile's rendering intent. First go to terminal, then type in the following command:
sips -s renderingIntent perceptual
Do not press 'enter' yet. Instead, add a space after 'perceptual', find the ICC profile you want to modify, and click and drag it into the terminal window. You should then find that your command looks something like this:
sips -s renderingIntent perceptual /Users/yourname/folder/RandomProfile.ICC
At which point you can then press 'enter', and the command will execute, giving you an ICC profile which will now make Aperture use perceptual rendering.
There is just one further thing to be aware of after doing this: for some crazy reason, you then need to turn on BPC in Aperture for the prints to come out as good as possible. Black point compensation shouldn't make any difference when using perceptual rendering as the idea of perceptual is that it takes account of things like that anyway, however, in Aperture BPC does make a difference, so remember to turn it on to get a half decent print. In general, I find that prints made using this setup come out pretty well; they almost perfectly match prints made using the profiles with a perceptual intent in Photoshop Elements, except for the fact that Aperture blocks up the shadows a bit more than Photoshop. However, if you can live with that, you might find this is quite a workable solution.
Now, I said near the beginning of this post that all the above can apply to other printers too. Most printer profiles have 'perceptual' set as their default rendering intent, in which case everything I've just said won't be of much help. However, If you are reading this because you're having problems with ICC profiles in Aperture, but you don't use an Epson R2400, find your problematic ICC profile, double-click on it, and take a look at the window that opens: specifically, at the 'Rendering Intent' the window mentions. If it doesn't say 'Perceptual' then it may well be worth trying the steps I've outlined in this post to set it to perceptual, to see if doing so produces an improvement when using the profile in Aperture.
Finally, just one note of caution: if you decide to try out the steps I've detailed above on a paid-for custom-made profile, please back your profile up before messing with it. I haven't experienced any problems when using SIPS to change a profile's rendering intent, but I obviously can't guarantee that it won't do something weird and corrupt your expensive custom-made profile.
If you have any questions, feel free to ask, although (contrary to any impression I may give) I am not a colour-management expert; I'm just someone who doesn't give up when they have a problem that should be solvable.
Thomas
Mac Pro 2.0GHz with 30" ACD; 15" MacBook Pro 2.0GHz Mac OS X (10.4.10)Thomas
Wow - thanks for such a comprehensive post.
I have Aperture and a 2400 so this information is exceptionally useful to me.
Again - thanks for caring and sharing
Brian -
Problem printing Report with Image in BI Publisher 11g
I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
When I tried printing PDF in output I get
Type /Xobject
subtype /Image
Filter /DTDDecode .......
When I tried printing HTML output I get
Type /Xobject
<html...
....>
When I tried printing RTF I get
{ \fontb1 }
{ \f0 Arial;}
{ \f1 Times:}
I think I am missing some BI publisher configuration. Can you help me in this regard.
Thanks,
Santosh
Edited by: user4956795 on Jan 16, 2012 2:08 PM
Edited by: user4956795 on Jan 16, 2012 2:18 PMIsn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser -
Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer
Dear Sir or Madam:
I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
I have a HP Officejet 6500 E709n Series printer.
I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
Are there any software updates to correct this problem?
Please reply back soon.
Thanks.
Sincerely,
EtowWelcome to the forums Etow,
I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
If the above does not help, try using Firefox or Internet Explorer to print.
Have a great Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Quality problem printing in Windows 8.1 with CP1215
Recently purchased new laptop with Windows 8.1 Pro. I have had my printer for years, CP1215, via USB, without having any problems printing to it with Windows 7 Pro. I first noticed that the quality of print I receive out of my printer on the new laptop is darker. The darkness comes from black lines going diagonally across the page. I would estimate at approximately a 2 degree angle. I would also estimate that the lines appear every 4th pixel row. I have attached 2 images, printed on 2 different printers. The one on the top is the one off of my CP1215, the one on the bottom is a color copier in my office. I have zoomed in incredibly on the prints to show the lines. Just never had problems with this printer in pre Windows 8.1 days. Tried installing ljcP1215-HB-pnp-win64-en. Tried uninstalling printer, rebooting, then installing, still same problem. I also have another problem with printing, but suspect it is more of a Microsoft problem. My laptop thinks a network printer goes offline, stopping and restarting the print spooler service seems to fix that. I had to make a .bat file on my desktop to do it, it happens at least 2 times in an 8 hr work day.
Hi paulie99, Welcome to the HP Forums, I hope you enjoy your experience! I understand the printer isn't printing properly from Windows 8.I will be happy to help you. Check your printer driver settings. 1. On the File menu in the software program, click Print.2. Select the driver, and then click Properties or Preferences.3. Click the Paper/Quality tab.4. In the Type is or Size is list box, select the correct media type or size. Set the quality to ImageREt 2400. I have provided a document to install the Windows print driver to see if that makes a difference.Installing the Printer Software in Windows 8.1 for a USB or Network Connection. For the network printer I would setup a static IP address. Please let me know the results if you are still having issues. Thank you for posting on the HP Forums.Have a great weekend!
-
Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?
Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP
Maybe you are looking for
-
Vista and TC - Vista no longer seeing TC
I purchased TC so that I could network my Vista (SP1) and Leopard computers. I wanted to add TC to an already existing network and to simply use it as a remote server to extend my wireless. Everything was working great for about 3 weeks. Now, suddenl
-
Hi I am relatively new to the SRM module and I have query for you guys. In extended classic scenario, (or irrespective of deployment scenarios) for PO creation in the backend R/3 system I believe the BAPI is called through RFC and hence PO is created
-
I have made a bootable copy of OS 10.6.8 onto an external G-drive from my 2007 24" iMac with success. I can't boot up my my new 2013 imac that has Mavericks installed. Any suggestions?
-
Hi all, DB- ORACLE 9.2.0.4 I am facing problem in one query it is taking more than one hour, so i have traced the query and aslo after 15 min i ahve to cancel the query.... select MRH_MRN,DECODE(MRH_SEX,'M','MALE','FEMALE') AS SEX, trim((mrh_sur_nam
-
Setting a retimed "Hold" section back to "Normal" Doesn't Work
After using the "Retime" functionality to "Hold" a clip I then decided against it, but I can't get rid of it. Using the shortcut "Shift-N" or choosing "Normal" from the Retime menu, which normally works, fails. It fails by doing a little flicking ani