Help, Really annoying problem,

when I copy certain tracks to my ipod, they appear 2 times in the ipod listings as in If I copy over 'Since I've been loving you by led zepp' and then click on led zep in the artist listings, there will be two idenical names 'Since I've Been Loving You', like its referencing the same song twice, I'm using a Nano latest firmware, and latest itunes with a macbook, its really annoying,
Also alot of times songs I send over wont appear under the artist as expected, and they dont even appear under the unknown section, instead the only way to play them is find them in the all songs section, I mean whats that about??
Thanks in advance,
John

A spelling or punctuation mistake, or sometimes a trailing space usually causes this after the artists and/or song name, which fools the iPod into thinking that there are two different artists or songs. The trailing space is the hardest to spot.   Best way to cure this is to go into iTunes, highlight that artist and/or songs, right click on them and select "get info".   This brings up the multiple song info window. In the artist or song box retype the name, as you would like it, and then click ok. Do this even if no mistakes are immediately visible.
  Re sync this new artist/song info to your iPod.
As for your artist problem, it could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
You should also check that the songs have album name info in their ID tags.
See: Some songs don't don't show under artist on my iPod.

Similar Messages

Really really annoying problem with slooooow Adress Book

I have a really, really annoying problem with Address Book.
Ever since I connected it with the MobileMe service it has this problem, and I just cant get rid of it. I have tried logging out and back into the MobileMe service, resetting the sync history etc., but to no avail.
Each time I open the application it freezes for about 5 to 10 seconts, then that blooming annoying, Windows reminiscent, rotating rainbow circle appears for about a minute at a time. Then it goes away and the application works..........that is until try something demanding like adding a new group or changing a group name, then it starts over. It is making the Address Book almost unusable and very un-Mac-like.
Can someone please help???

Try deleting this plist:
(yourUserName)/Library/Preferences/com.apple.AddressBook.plist
As well, the general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure your 3rd party apps are Snow Leopard compatibl

Connecting via Airport express: really annoying problem

I've got a really annoying problem that doesn't make much sense. Have an airport express and my network seems to work OK mostly. My iBook can always connect, never any problem. My eMac however is behaving bizzarely. The longer I'm connected, the worse my connection gets. Until it stops working altogether and I can't access the internet at all. System preferences tells me the Airport card is on, but is not connected to a network. Can still connect to it with the iBook.
Shut down, leave it a good while (a good while too, a short shut down doesn't do it), and it works again.
I can't even think where to start looking, all I can think of is that I have a problem with the Airport card in the eMac (something getting hot in there perhaps). Any ideas?

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

Really annoying problem... if anyone could help that would be great

everytime i click to add folder to import an cd album on my comp, it always imports double the amount of songs into itunes. i.e. if i try to add a album on my comp with 13 songs, then it will import 26 songs into itunes, and I will have a duplicate of each song. any help on this problem would be greatly appreciated....
thanks in advance

Hmmm, do your album folders have duplicate songs in them? It's probably a dumb question but I don't know the whole story. And also, in your album folders, are there any kind of 'System Information' files or '.cue's in them?
As an alternative to your importing issue, I say go to the folder manually, highlight all the songs you want to import, and then drag and drop into your iTunes music library. Make sure, however, that "Music" under "Library" (on the left task pane) is highlighted or that a custom playlist of your own is highlighted. I say this because you can not add new songs to smart playlists which are, for example, the "Recently Added" or the "Recently Played" smart playlists.

PLEASE HELP : REALLY ANNOYED

Hi i bought the WRT54G version 8 at xmas time. And ever since ive been struggleing with this DANM router. I have two home PC's both of which are hardwired (landlined) into the back of the router. I also play PS3 and Xbox 360 wirelessly. Now my problem here is that ive called for help like 3x now and they have given me advice and it seemed to have worked... but then it doesnt. My ps3 wireless connection is running terrible... im in the 1red(LAGGING) when im usually at full green. My internet connection is Aliant / DSL and i know it is the routers problem because my internet provider has already clarified to me that everything is running fine and i should not be having problems. I have upgraded the firmware version to the latest one... I have changed the MTU setting to manual at size 1429. I have gone into wireless / advanced setting and changed my beacon interval from 100 to 50. All of these changes were recommended by the Technician at Linksys.
Now the internet seems to be working better / a little faster but my PS3 wireless did not change one bit. Also i play a game on my PC called Starcraft. Ive never ever had problems with my connectivity to this game and ive played this game on and off for 10 years. These problems are really really annoying me and i dont know what to do. Im really frustrated and wish someone could help me because the technicians at linksys havent done **bleep** for me (excuse my language im just frustrated).
PLEASE SOMEONE HELP ME!!!!!

the rtr have a NAT..it protects everything in the network but unfortunately sometimes it blocks some packets to make the ps3 work freely...i haven't read that you have done any port opening...pls verify!
now another problem is that a DSL connection uses NAT capable modem...its multiple NAT on your network...Its a big problem..
suggestion..
open the ports for the rtr...the port numbers you may ask from microsoft..click the link for the steps
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5402&p_created=11714...
do step 3 and 4 to open the ports that you will get from ps3...
CamZ

A really annoying problem!!!

Alright guys, I got an annoying problem with my mac.
The text formatting is on many occasions all wrong like this:
http://users.pandora.be/solid_raven/vb1.jpg
Another thing is, the sound fails me, but not in itunes and stuff but only in flash files, games etc. Really annoying!
I did a complete format before but after a couple of days this came up again.
Anyone know what to do about it?
Ty!

I'm not sure about the text problem (although sometimes it can be to do with the website itself, I think), but the sound problem sounds like something that happened to me a while ago. Go to Applications>Utilities>Audio MIDI Setup and look where it says "Audio Output" - there'll be a box for "Format". Check the Hz number it says; ensure that it says 44100.0 Hz. If you find that it did not say 44100.0 Hz your problem is one of the programs you use. Some programs, e.g. Audacity (that's the one that caused my problem), change that level to one that is too high - this causes the sound problems you described. Once you've found out which program it is you can either avoid using it or change the level back to 44100.0 Hz after every use.

Really annoying problem, can't get past 'getting started' screen!

Hi,
Can't get ipod and itunes working for the first time!
Ipod is plugged in and appears in the itunes menu, click on ipod and a screen appears on the right hand side saying something like 'getting started'. The problem is that the type runs over the edge of the window (can't read all the info) and there's no link/tickbox to set up the ipod. Tried widening window but moves about an inch then stops. Is there any way to get things working without this annoying problem?
I'm trying to get this working for a friend and don't know much about Windows as I use a mac (which worked first time with my ipod!).
Any replies appreciated, Steve.
Ipod classic 80 gig/win XP/itunes 7.5

I have the EXACT same problem. I own a first generation iPod nano and I loved it so much that I bought my boyfriend the 3rd generation. I downloaded iTunes for him and everything was going great until I went to register. The screen is doing exactly what you described. You can tell there is something on the right side that needs to be clicked but you can't scroll over there to do it. I'm frustrated because he wanted to sync all his music before we started to travel for the holidays and now we can't! Please let me know if you figure anything out or find out anything. Thank you!!
FYI - I tried to register online to see if that would help but it didn't make a difference. Also, you can still put songs onto your iPod by dragging them into the iPod section but once they are there you can't manipulate them or take them back off.
Message was edited by: clp320

Really annoying problem on My O2 accessing the community!

I have a Nexus 7 2013 and a Sony Xperia z1 compact. Both have this really annoying glitch whereby when in the community section, evert time i press the 'back' arrow (the app one, not the Android soft key) it opens the 'my offers and perks' page and takes me to the page where it tells me how much it costs to upgrade! I have to repeat this half a dozen times before it finally navigates back to the previous page. The touchscreen on both devices in this app seems glitchy too, it tries to highlight things in other areas of the screen at times. I have an iPhone 5s and never have this bother when accessing the community via that. I've tried exiting the app, signing out and back in again to no avail. I'm nearly at upgrade time, I hope this isn't O2's way of persuading me to renew! How do I sort this or is it just me?

Just tried uninstalling and reinstalling My O2 on both the Z1 and nexus and it's still doing it on both devices. Still seems ok on my iPhone so far.
Thanks , The Xperia Z1 Compact is running Android 5.0.2, and my Nexus 7 is running 5.1.1. Both devices are running standard firmware and are not rooted. I acces the community via the link on the 'hamburger' menu on the left of the screen after signing in. I might try doing it via the community link at the bottom of the sign in screen and see if not signing into My O2 via my pin makes any difference.

Really annoying problem, please help!

We have just upgraded to quad core mac pro and for some reason when we try to encode video, either in compressor or directly in DVD studio pro, the bottom third of the frame is solid green!
We didn't have any problems when we were running the exact same version on a Dual Core but I have no idea if thats relevant. It happens with every quicktime movie we try and it doesn't seem to matter what settings we use. Its driving us crazy as the deadline for the project is approaching really fast!
Any help would be greatfully received.
Simon

Sorry no one has gotten back to you. The only thing I can even possibly sugegst is to reinstall the latest upgrade to QT. You can delete the RECEIPT for the last one or two revs of QT that you got handed by Software Update and run Software Update again. It will see that those receipts are missing and resend and redo the QT updates.
There is an apple knowledge base article on the process. Sorry, can't put my finger on it right now. This might work,
http://docs.info.apple.com/article.html?artnum=301505
bogiesan

I'm having a really annoying problem...

I have a problem with a variable changing twice, but never again. Sorry if it's huge and hard to read. I'm cutting a lot of stuff out and such. I have ellipseses everywhere. Anyway. The variable in question is Player.intFlag1
class Player
     static String pName;
     static byte pGender;
     static String pHim; //Objective
     static String pHis; //Possessive
     static String pHe; //Subjective
     static byte pRace;
     static byte pClass;
     static byte pLevel;
     static datStat pStr = new datStat();
     static datStat pDex = new datStat();
     static datStat pCon = new datStat();
     static datStat pInt = new datStat();
     static datStat pWis = new datStat();
     static datStat pCha = new datStat();
     static int pHp;
     static int pMp;
     static int pGold;
     static datItem pBackpack[] = new datItem[14];
     static datSpell pSpells[] = new datSpell[14];
     static datItem pWeapon = new datItem();
     static datItem pArmor = new datItem();
     static int pAdventure;
     static int pRoom;
     static int intFlag1;
     static int intFlag2;
     static int intFlag3;
     static int intFlag4;
     static String strFlag1;
     static String strFlag2;
     static String strFlag3;
     static String strFlag4;
public class Segment extends JApplet implements ActionListener
JPanel cardPanel;
     CardLayout cards;
     JTextArea gameOutput;
     JButton gameSitBut0;
     JButton gameSitBut1;
     JButton gameSitBut2;
     JButton gameSitBut3;
     JList gameAround;
     JList gameItems;
     JList gameSpells;
     JButton itemReady;
     JButton itemExamine;
     JButton itemDrop;
     JButton itemReturn;
     JButton spellReady;
     JButton spellExamine;
     JButton spellReturn;
     JButton spellForget;
     JButton statusReturn;
     JLabel statusName;
     JLabel statusGender;
     JLabel statusRace;
     JLabel statusClass;
     JLabel statusLevel;
     JLabel statusStr;
     JLabel statusDex;
     JLabel statusCon;
     JLabel statusInt;
     JLabel statusWis;
     JLabel statusCha;
     JLabel statusHp;
     JLabel statusMp;
     JLabel statusGold;
     JButton gameItem;
     JButton gameSpell;
     JButton gameStatus;
     JButton gameAttack;
     JButton gameTalk;
     JButton gameSearch;
     JButton gameUse;
     JButton gameCast;
     JButton gameTake;
     JButton gameSave;
     JButton gameNorth;
     JButton gameEast;
     JButton gameSouth;
     JButton gameWest;
     JButton gameLook;
     int intPFlag;
     String strPFlag;
     DefaultListModel aroundList;
     DefaultListModel itemsList;
     DefaultListModel spellsList;
ActionListener actSitBut0 = new ActionListener()
if(Player.intFlag1==0) //Where I test for it. There's no problem here
{                       //unless thish is where the problem is.
     gameOutput.setText("You have no more points to distribute.");
}else if(...) //This checks a JList's Selection then does a huge amount
{             //of code, similar to what's in here. There's 6 of these.
switch(Player.pStr.score)
     case 3:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 4:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 5:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 6:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 7:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 8:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 9:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 10:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 11:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 12:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 13:
          Player.pStr.score++;
          Player.intFlag1--;
          gameOutput.setText("Text");
     break;
     case 14:
          if(Player.intFlag1<2)
               gameOutput.setText("Text");
          }else
               Player.pStr.score++;
               Player.intFlag1-=2;
               gameOutput.setText("Text");
     break;
     case 15:
          if(Player.intFlag1<2)
               gameOutput.setText("Text");
          }else
               Player.pStr.score++;
               Player.intFlag1-=2;
               gameOutput.setText("Text");
     break;
     case 16:
          if(Player.intFlag1<3)
               gameOutput.setText("Text");
          }else
               Player.pStr.score++;
               Player.intFlag1-=3;
               gameOutput.setText("Text");
     break;
     case 17:
          if(Player.intFlag1<3)
               gameOutput.setText("Text");
          }else
               Player.pStr.score++;
               Player.intFlag1-=3;
               gameOutput.setText("Text");
     break;
     case 18:
          gameOutput.setText("Text");
     break;
     default:
          gameOutput.setText("ErrorText");
          Player.pStr.score = 8;
          Player.pStr.modifier = -1;
          Player.pStr.base = 8;
          Player.pDex.score = 8;
          Player.pDex.modifier = -1;
          Player.pDex.base = 8;
          Player.pCon.score = 8;
          Player.pCon.modifier = -1;
          Player.pCon.base = 8;
          Player.pInt.score = 8;
          Player.pInt.modifier = -1;
          Player.pInt.base = 8;
          Player.pWis.score = 8;
          Player.pWis.modifier = -1;
          Player.pWis.base = 8;
          Player.pCha.score = 8;
          Player.pCha.modifier = -1;
          Player.pCha.base = 8;
          Player.intFlag1 = 25;
     break;
public void init()
public void doNewGame(int intFlag)
select(intFlag)
case 5:
     aroundList.clear();
     aroundList.addElement("Strength");
     aroundList.addElement("Dexterity");
     aroundList.addElement("Constitution");
     aroundList.addElement("Intelligence");
     aroundList.addElement("Wisdom");
     aroundList.addElement("Charisma");
     cards.show(cardPanel, "Around");
     gameOutput.setText("sOMEtEXT");
     gameSitBut0.setText("Info");
     gameSitBut1.setText("Add");
     gameSitBut2.setText("Subtract");
     gameSitBut3.setText("Reset");
     gameSpell.setText("Done");
     gameSpell.setEnabled(true);
     gameSitBut0.setEnabled(true);
     gameSitBut1.setEnabled(true);
     gameSitBut2.setEnabled(true);
     gameSitBut3.setEnabled(true);
     Player.pStr.score = 8;
     Player.pStr.modifier = -1;
     Player.pStr.base = 8;
     Player.pDex.score = 8;
     Player.pDex.modifier = -1;
     Player.pDex.base = 8;
     Player.pCon.score = 8;
     Player.pCon.modifier = -1;
     Player.pCon.base = 8;
     Player.pInt.score = 8;
     Player.pInt.modifier = -1;
     Player.pInt.base = 8;
     Player.pWis.score = 8;
     Player.pWis.modifier = -1;
     Player.pWis.base = 8;
     Player.pCha.score = 8;
     Player.pCha.modifier = -1;
     Player.pCha.base = 8;
     Player.intFlag1 = 25; //This is where it gets set. It works
//once. but when intPFlag becomes 5
//again, it ignores this statement
     statusStr.setText("Str: " + Player.pStr.score);
     statusDex.setText("Dex: " + Player.pDex.score);
     statusCon.setText("Con: " + Player.pCon.score);
     statusInt.setText("Int: " + Player.pInt.score);
     statusWis.setText("Wis: " + Player.pWis.score);
     statusCha.setText("Cha: " + Player.pCha.score);
break;
default: //This is resets the entire thing, starting over, when
//doNewGame is called with a high number like 99999. There's
//an ActionListener that does this on gameItem.
     gameOutput.setText("sOMEtEXT.");
     gameSitBut0.setText("New Game");
     gameSitBut1.setText("Load");
     gameSitBut2.setText("");
     gameSitBut3.setText("");
     gameItem.setText("Items");
     gameSpell.setText("Spells");
     gameSitBut1.setEnabled(false);
     gameSitBut2.setEnabled(false);
     gameSitBut3.setEnabled(false);
     gameStatus.setEnabled(false);
     gameItem.setEnabled(false);
     gameSpell.setEnabled(false);
     cards.show(cardPanel,"Around");
     Player.pName=null;
     statusName.setText("Name: ");
     Player.pGender=0;
     statusGender.setText("Gender: ");
     Player.pRace=0;
     statusRace.setText("Race: ");
     Player.pClass=0;
     statusClass.setText("Class: ");
     Player.pLevel=0;
     statusLevel.setText("Level: ");
     Player.pStr=null;
     statusStr.setText("Str: ");
     Player.pDex=null;
     statusDex.setText("Dex: ");
     Player.pCon=null;
     statusCon.setText("Con: ");
     Player.pInt=null;
     statusInt.setText("Int: ");
     Player.pWis=null;
     statusWis.setText("Wis: ");
     Player.pCha=null;
     statusCha.setText("Cha: ");
     Player.pGold=0;
     statusGold.setText("Gold: ");
     Player.pHp=0;
     statusHp.setText("Hp: ");
     Player.pMp=0;
     statusMp.setText("Mp: ");
     Player.pAdventure=0;
     Player.pRoom=0;
     Player.pWeapon=null;
     Player.pArmor=null;
     Player.pBackpack=null;
     Player.intFlag1=0; //This works at least once, but seems to
//take control of the variable, like it were
//final or something.
     Player.intFlag2=0;
     Player.intFlag3=0;
     Player.intFlag4=0;
     Player.strFlag1=null;
     Player.strFlag2=null;
     Player.strFlag3=null;
     Player.strFlag4=null;
     Player.pHim=null;
     Player.pHis=null;
     Player.pHe=null;
     aroundList.clear();
     itemsList.clear();
     spellsList.clear();
     intPFlag = 0;
break;
So yeah, I know, longest post in history, right? This just completely baffles me. To me , going through it, it should work. I even commented out the line where it sets the flag to 0, and it didn't change the outcome. Any insight would be very helpful thanks for even reading this far.
`TygerWulf~

Do yourself a favor -- repost with code tags.Oh, thanks. Sorry, I'm just really new and quite a bit confused. I don't do well when confused.
`TygerWulf~

Really annoying problem.

Well I thought I'd download a trial version of Photoshop on my computer so I did.
However, Every time I attempt to install it I get the following error;
']Adobe Photoshop CS4
Error:
Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
Adobe Photoshop CS4
Error:
Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.'
Everything installs except Photoshop CS4 itself.
I've tried re-downloading and such but I still get the error.
I've done a lot of searching for a fix but there's absolutely nothing that solves the problem.
Anyone know a way to resolve this very annoying issue?
My computer;
Windows XP 32-bit
More than sufficient hard drive space.

If you went to the Adobe site and down loaded the trial of PS CS4 did you get any errors or was the download complete?
Did you put the folder on the desktop that contained the 2 files?
Did you right click on the .exe file in the folder and run as Admin?
Turn off any anti-virus running on XP.
The biggest problem now is that even with the partial install of PS CS4 trial, with the rest failing, the trial cannot be reinstalled. You will have to re-format your hard drive and reinstall XP.

A really annoying problem regarding the Zen Vision M 30 g

When I go to the creative media?program it says that I don't have a player plugged in. I've done the system registry editing for the USB that was on the support page, but that doesn't work either. Any help would be greatly appreciated.

I have Windows Media player 0 installed at the moment but I'm going to try to get the th version installed when I get home. Last time I tried to get it to install it wouldn't for some reason,?but I'm going to?look into that problem. I don't think this is related to the Windows Media player though.

A really annoying problem with a button/movie clip

I am having a problem with a button! its driving me insane
because i managed to do it last week, but that was by chance and
now i can't remember how i did it!
I can get the button (i'm using gelright from the common
libraries panel) and convert it to a movie clip(by pressing F8) and
even attach a behaviour but when i play the movie it doen't work!
when i move the curser over the button it changes into a hand, but
will not act like a button, even though i have set the behaviour to
'on release, go to and play keyframe 2'.
Please help me, for the sake of my laptop goin through the
wall!

virgosam20 wrote:
> first, i found the button i wanted in the common
libraries (gelright) and
> added it to the stage. I resized it and converted it
into a symbol as a movie
> clip. Then it got added to my library.
> Then i deleted it from the stage and replaced it with
the movie cip version i
> had just converted it to. so now i have the same object
on the stage, but now
> its a movie clip and not a button.
ok - you are running yourself around in circles - why did you
delete it to the stage only to add it
again? once you converted it to a movie clip, you had what
you wanted on the stage - but then you
deleted it and dragged another instance of the same symbol
back onto the stage - there's no reason
to do that.
> Then i double clicked on it to bring up the movie clip
timeline, but instead
> of saying 'top, down, over, hit' (or whatever it says),
it jsut said 'layer 1'
> (but this was not my original stage as i have a number
of layers on that one).
Right - this is expected because yoyu are now inside the
movie clip timeline - not the button timeline.
> When i double clicked on it again, it brought up the
right headings (top, down,
> over, etc),
Right - because by double clicking the button symbol you were
then brought to "edit mode" for the
button symbol.
but there were about 5 layers that showed the different
layers for
> the original button.
Huh? What "5 layers"? What do you mean "original" button -
per your description there has only ever
been 1 button you have been working with.
> I think i have to add the button to each of the
headings, bt there is no room,
Lost you completely now - what do you mean add the button to
each heading? I have no clue what you mean.
> as when i did it before, there was only one layer for it
and i had to insert
> the key frames myself.
Still losing you here.
> I then added a behaviour to it using the Behaviours
pannel, (selected
> movieclip, then 'go to and play....') and it appears in
the behaviours pannel.
> But when i got to Play Movie, although the curser
changes into a hand, the
> button does not work.
That's because you are applying a behavior for a button to a
movie clip instead.
I think you went wrong when you converted the button to a
movie clip - i have no idea why you did
that or why to think your button needs to be in a movie clip.
>
> Hope that can help you with what i've done and you can
tell me where i've gone
> wrong.
>
I just think you don't understand how timelines, symbols or
buttons work yet in flash.
1. drag a button to the stage.
2. select it and open the Behaviors panel (dont double click
it to edit it).
3. add your actions.
4. test movie.
(no need for a movie clip here.
-chris

Video does not Work in iTunes Store please help! annoying problem!

The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?

I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video.

Really Confusing Problem

Hi allI am new here and have joined because i have a really annoying problem. I bought a PS3 that had no hard drive or controllers. So I bought a new hard drive and installed it. Turned the console one and it said i had to format the hard drive and to do that i need a controller in order to select the various options.So i bought a cheap controller off Amazon and as it turns out it didnt have a cable but i found a normal mini usb cable and plugged that in to sync the new controller to the PS3 so i could format the hard drive and then install the software which i have sitting on a USB stick. However, the controller wont sync with the console (presumably because there is no software on the hard drive). So i am stuck in a never ending cycle of needing software to connect the controller and needing a controller to install the software. I called playstation support and they said i needed the original hard drive for the console (apparently a friends one wont work) or to give them £110 to resolve the issue. Can anyone help out? Will a non-wireless controller work or do they need to sync as well? And will using a friends PS3 to load the software onto my hard drive and then putting that into my console work?

pipperella12 wrote:
Hi allI am new here and have joined because i have a really annoying problem. I bought a PS3 that had no hard drive or controllers. So I bought a new hard drive and installed it. Turned the console one and it said i had to format the hard drive and to do that i need a controller in order to select the various options.So i bought a cheap controller off Amazon and as it turns out it didnt have a cable but i found a normal mini usb cable and plugged that in to sync the new controller to the PS3 so i could format the hard drive and then install the software which i have sitting on a USB stick. However, the controller wont sync with the console (presumably because there is no software on the hard drive). So i am stuck in a never ending cycle of needing software to connect the controller and needing a controller to install the software. I called playstation support and they said i needed the original hard drive for the console (apparently a friends one wont work) or to give them £110 to resolve the issue. Can anyone help out? Will a non-wireless controller work or do they need to sync as well? And will using a friends PS3 to load the software onto my hard drive and then putting that into my console work?hard drives are tied to the console that uses them so if you use your friends as soon as you put it into your's it requires a format. you can use wired pads on ps3 and they dont sync.

Help, Really annoying problem,

Similar Messages

Maybe you are looking for