Help, Recovery/Restore error For ipod touch 2g

Hi, im hoping someone can help my because I really dread sending it away.
I've had my ipod for a total of seventeen days +(touch 2g 8gig),+ and yesterday when I plugged it into sync to the computer it was showing no music on it and about 4 gig of "other". After this, I disconnected it and checked on my ipod and I had seen that all my music was erased, and I couldnt find the 4 gig of other?
Anywho, I decided to restore it to its original settings.
Shortly into the restore I get an error message(14), and after I get this it booted into recovery mode and says I must restore before I can use it, but the problem is everytime I try to restore I get the same error message.
I have tried all the steps on the support page for error codes and still nothing.
I'd really like to resolve this and not have to send it away.
Any help would be greatly appreaciated
Thanks

FINALLY someone with the same problem as me. Exact same, and still unsolved...
I got the iPod Touch 2g 8GB on the 27th of December and on the 25th of January, I plug it in to Sync more music, and it says I have approx. 4gb of 'other', then my music was all gone...
I have tried update and restore ATLEAST 50 times by now and Soon, I'll give up hope and send it away. I even try the Shift+Restore method (I use XP) and get either error unknown (1) or error unknown (5) when i try it in DFU mode.
I hope someone helps solve our, as I love the iPod Touch.
Any help would be appreciated.
P.S, I have NOT tried to jailbreak it.
Message was edited by: YIFF666

Similar Messages

  • HT201263 I am unable to download the restore file for ipod touch due to slow internet connection. is there any other source to download the file to my windows7 computer?

    I am unable to download the restore file for ipod touch due to slow internet connection. is there any other source to download the file to my windows7 computer?

    Try this link or this place
    After the download, hold down the Shift key when you click Update in iTunes, and you'll be prompted to locate the downloaded firmware file.

  • Updating to iOS 5 and restoration problems for iPod touch

    I tried updating my iPod touch, I think second generation, to iOS 5 last night and when it didn't work I tried to restore it to which it now only shows a usb and iTunes logo. iTunes won't do anything with the iPod while it is plugged in, only saying it is verifying iPod restore with Apple which has been the message I've had for almost 24 hours. I tried to shut down iTunes to see if it would make a difference but when I try i get a message saying it cant quit because it's retoring the software on the iPod. Any suggestions on how to fix this?

    The error on the ipod is a usb pointing to itunes logo
    The itunes error is saying: "Verifying iPod restore with Apple..."
    When I try to quit iTunes it says: "iTunes cannot quit because it is restoring the software on 'Eddie's iPod."

  • I am trying to restore an older iPod Touch, but do not have the passcode.  I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account.  Help..

    I am trying to restore an older iPod Touch, but do not have the passcode.  I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account.  Help..

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please help!

    I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Help for ipod touch not recognized by itunes

    I am posting this to try to help others who have N ipod touch and windows is showing as a digital camera and itunes does not recognize after updating to 8.2.1. I tried EVERYTHING (uninstalling itunes, reinstalling, downgrading itunes, removing pics out of storage folder,restoring ipod, searching google for drivers for ipod, trying to find the right driver using device manager, made sure apple mobile was on and working, checked device manager under universal serial bus controls and apple mobile device was not listed, tried plugging in nano n itunes recognized it immediately... I found that alot of ipod touch owners had the exact same problem when upgrading itunes, but could not find a solution that worked..after about a week of trying fixed the problem..
    Download the newest version of itunes, dont install just download the itunessetup file, then go to google and search for and download 7-zip and after installing 7-zip right click on itunes setup file and click 7-zip extract, go to the extracted folder and double click on apple mobile device then repair it, restart comp (mine still wasnt working so i tried one more time) went back to extract folder and double clicked on apple mobile device and uninstalled and then reinstalled then went to device manager and looked under universal serials bus controls and to my suprise apple mobile device WAS FINALLY listed, plugged in ipod and opened itunes and there it was, my ipod

    I tried what you said to do and it didn't work.

  • New software update for iPod touch 4th generation? PLEASE HELP!!

    Ok so here is the problem: I have the iPod touch 4th generation with software version 4.3 (I have had my iPod for about 7 months) and recently within the past week or so I have started experiencing multiple crashes with many different various apps and games. Just random games crashing and then I noticed it happening with the Facebook app and even Safari on my iPod! I had to get off of my iPod and come on the computer to type this message out because Safari would crash every single time I tried to type this on my iPod! So at first I figured it was the apps and games' problems, but then as more and more began to crash, like Facebook and Safari, I figured it is the Apple software version 4.3 acting up. So I was wondering, is Apple working on a new software update for iPod touch 4th gen.? Or is this a rare problem? Is there anyone out there having this same problem? Or anyone at all that can PLEASE help me?! MANY THANKS!
    - Sam Amos

    No one would know what Apple is working on, unless they announce, which they very rarely do.
    Have you tried the basics from the manual?
    restart.
    reset.
    restore.

  • Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade.

    Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?

    I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html

  • Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -i have paid for this, but when it goes to the itunes for downloading it says it is downloading but nothing seems to be happeneing. help please!

    Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -i have paid for this, but when it goes to the itunes for downloading it says it is downloading but nothing seems to be happening. help please!

    Hello mixanme,
    Sorry to hear you are not able to update your iPod touch using iTunes.  Thank you for providing all that information about what is going on. I found an tutorial to assist with issues updating an iPod touch:
    Issues updating or restoring iPod touch
    http://www.apple.com/support/ipodtouch/assistant/restore/
    I hope these steps help!
    Best,
    Sheila M.

  • What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

    what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

    Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
    “SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
    Here is my original post explaining what I had already tried:
    “Hi all,
    I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
    I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
    I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
    Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.”
    Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
    Tiffany
    P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

  • There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again.

    The error
    Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
              Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.

    Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
    “SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
    Here is my original post explaining what I had already tried:
    “Hi all,
    I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
    I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
    I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
    Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.”
    Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
    Tiffany
    P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

  • I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

    I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already

    What did the error message say?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT201210 how to bypass error 1600 during the restoring of my Ipod touch 4g

    how to bypass error 1600 during the restoring of my Ipod touch 4g

    Next try;
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Could not restore 1st gen ipod touch unknown error occurred(2003)

    could not restore 1st gen ipod touch unknown error occurred(2003)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • IOS 5.0 update for iPod touch: restore from backup?

    I downloaded the iOS 5.0 for iPod touch and everything got backed up beforehand. Apparently my backups are encrypted and a password is needed to use a backup and restore everything back. I don't know what that password is! Can anyone help?

    If you don't know the password, you'll have to set it up "as new device" and start all over again without using the backup. If you did not encrypt your backup and this somehow happened after the update, try to put in one of the password you use on your device, for example the screen lock password or your iTunes account code.
    There have been cases in the forum, where users were able to unlock the backup by trying this method, after their backup got encrypted during the update process for an unknown reason.
    How to set up your iPhone or iPod touch as a new device
    Message was edited by: Ingo2711

Maybe you are looking for

  • Error"Update was terminated' while doing picking and data was not saved

    hi experts, I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch. it gives a message Express document " Updated was terminated "received from author XXXX. and picking is not saved and i

  • Variable of Type "Object" is getting Null in script task

    I have 3 components as below 1.   Execute Sql Task ---> It will fetch The data from Database using ConnectionType "OLEDB" ("Full Result Set" its returning) and Store it in the Variable as below,       "ConfigDetails"   "Scope --> Package"    "Type - 

  • Cannot print PDF's with Kyocera

    I am using a Kyocera 5050 in my office installed as a network printer that utilizes local authorization codes for each employee in order to track printing usage. Normally, a print job will be sent to the printer and a box will pop up asking for crede

  • T450S MultiMon support with ProDock

    Hi.  I've got the T450S mated to the Pro Dock series 40A1. I cannot get the Pro Dock to work with two external monitors when using the Display Port. Dual Monitors work when using the VGA + DVI-D combination, but when connecting a monitor using the Di

  • Matlab workspace not getting updated while labview mex file is running

    Hi, Let me start from the overview of the system for better understanding. The system is to acquire data from a DAQ6070e using labview 7.1 . this data is then to be used in matlab for processing. All this needs to happen in real time hence the data i