Help Regarding error (TNS)

hello all,
i have one error regarding TNS.
after some interval i got tns-12520 or tns-12528 error.
but when i restarting services or my server then it works fine.
so what can i do to solve this error .
please help
any help appriciated

i m using
Windows 2003 server (for server) and win-2000 professional for client machines.
and i am using 10g R2 oracle version.
and no. of processes in init.ora file is 150.
Message was edited by:
Pankaj M

Similar Messages

Help - Regarding Error Message

Does anyone know exactly what the following means? I printed out roughly four DVD's - problem. Came back a day or tow later to burn another, then the following appeared. Nothing has been changed regarding the DVD's used, power, wiring, you name it. When I go to do advance burn it races through the menus - starts - then this appears... please help.
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
-----

http://www.pioneeraus.com.au/computer/faqs/faq_22.html
Consensus is that the error is either due to a media problem (bad media, using DVD+R media on a DVD-R drive or vice versa) or a failing burner.

[HELP] 10g error TNS-12518: TNS:listener could not hand off client connecti

Hi all,
TNS-12518: TNS:listener could not hand off client connection
(when I do a sqlplus, it hangs for one two minutes, then the error above shows)
My oracle 10g is installed in a windows system. this error only happens when the database is heavily used for some time. After I restarted the Listoner, the connection is ok again. Does anyone has a solution for this? Thanks a lot.
Jason

Monitor your page file usage on Windows system (I assume its a 32 bit machine). When Windows starts to swap Oracle SGA into page file., you encounter TNS errors. Strange but we have observed this.
If you can allocate more free physical memory on the server (by removing unwanted applications from the memory), then you can reduce these errors.
Permanent solution would be to add more physical RAM (with 4GT on 32 bit) or switch to 64 bit architecture.
Message was edited by:
Satish Kandi
Typo corrected and added following.
You can set DIRECT_HANDOFF_TTC_LISTENER=OFF in listener.ora and restar the database as temporary solution. Check metalink Doc ID: 233747.1

Help regarding Error pls-00920

when executing a procedure i got following error
18/1 PLS-00920: parameter plsql_native_library_dir is not set
what is this means ?
what can i do to solve this error

Hi,
PLS-00920: parameter plsql_native_library_dir is not set
Cause: A PL/SQL program is being compiled natively, but the compiler parameter plsql_native_library_dir, which denotes the directory to store the native shared objects (DLL), is not set.
Action: The DBA should set this parameter. cheers
kumar

TNS-12541: TNS:no listener TNS-12560: TNS:protocol adapter error TNS-00511: No listener

Dear Team,
When I am trying to start my LISTENER on my Windows server manually its showing error like The OracleOraDb11g_home1TNSListener service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.I Have created LISTENER twice also.When I am checking status on CMD prompt below is error is showing.Please help me out how to solve the issue.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<host name>)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Regards,
Praveen K

Hi,
Did you check whether the windows service for listener is up and running? if not please start it, by typing "services.msc" in run window and start the service. Then check whether you have listener.ora file in $ORACLE_HOME/network/admin and also post listener.ora contents.
Regards,
Pradeep. V

About error TNS-03505

Hi to all,
I have created a DB Link to remote MS SQL Server DB and I have modified the listener .ora and tnsnames.ora files.
The link work fine fine; if I try to query a remote table, the data are correctly displayed.
But if I run the tnsping <myconnection> an error TNS-03505 is returned.
Can You help me ?
This is the listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = <myHost>)(PORT = 1521))
(ADDRESS =( PROTOCOL = ipc)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = <myHost>)(PORT = 1522))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\OraDb10g)
(PROGRAM = extproc)
(SID_DESC=
(SID_NAME=MYSQLDSN)
(ORACLE_HOME = d:\oracle\product\10.2.0\Oradb10g)
(PROGRAM=hsodbc)
and this my tnsnames.ora
MYAPPDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <myHost>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYAPPDB)
MYSQLDSN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=<myHost>)(PORT=1522))
(CONNECT_DATA=(SID=MYSQLDSN))
(HS=OK)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Thanks in advance and Best Regards
Gaetano

03505, 00000, "Failed to resolve name"
// *Cause: The service name you provided could not be found in TNSNAMES.ORA,
// an Oracle Names server, or a native naming service.
// *Action: Verify that you entered the service name correctly. You may need
// to ensure that the name was entered correctly into the network
// configuration.

Go error TNS: no :listener

Dear All Expert,
I try to install Oracle Database till step testing confguration, it's shown error message as below:
Connecting...ORA-12541: TNS:no listener
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
Please kindly give advice for this.
Thanks and regards,
Vandy

Dear Niket,
Thank you very much for your prompt reply and help.
Note: My Oracle Database (11g Release 2) is installed on Oracle Linux 5.8
I have checked with your advice and get result as below:
[oracle@ovmmger ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 14-JAN-2013 03:36:29
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ol5-112.localdomain)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 111: Connection refused
[oracle@ovmmger ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 14-JAN-2013 03:36:39
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/ovmmger/listener/alert/log.xml
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ol5-112.localdomain)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 111: Connection refused
Listener failed to start. See the error message(s) above...
[oracle@ovmmger ~]$
Please kindly give advice for this.
Thanks and regards,
Vandy

Need help regarding Java decoding of IMAP attachment (IOStream related ques

Hi ,
I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
     at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
     at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
***Here is the snippet of code that is running this:***
m_contentObj = m_message.getContent();
if(m_contentObj instanceof InputStream)
     System.out.println(" Content is type of InputStream");
     InputStream stream = (InputStream) m_contentObj;
     byte[] tempBuffer = new byte[m_maxDataSize];
     stream.skip( m_currPos );
     int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
     System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
     m_currPos+=     bytesRead;
Please suggest what to do.
Thanks & Regards
Saurabh

BUMP, just incase its been missed by a new board member

TNS-12560: TNS:protocol adapter error TNS-00530: Protocol adapter error

Unable to start listener service.
Running Oracle Database 11gr2 on Windows 7.
I just installed Oracle with the "install software only" option.
Already set up the instance, the database, the dictionary views, etc.
Created tsnames.ora, sqlnet.ora and listener.ora as shown below.
Before installing Oracle I followed the instruction on Oracle
documentation to install a Loopback Adapter.
It is set up as the primary adapter as indicated on the
instructions. The name is "gabylan" (previously the computer
name was "P4". I set up the "hosts" file as indicated, the oracle_hostname
variable, etc. as you will see below. I don't know if it's important to "uncomment"
the line on the "hosts" file for the "localhost" entry, I left it
as it was originally.
Services currently in "Started" Status:
OracleServiceorcl
Oracle orcl VSS Writer Service
OracleMTSRecoveryService
OracleOraDb11g_home1ClrAgent
OracleServiceorcl
Below is a summary of the error message and some information
about my system setup to help you diagnose my problem.
===============================================================================
c:\Users\Public\myscripts>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-SEP-2012 13:48
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
c:\Users\Public\myscripts> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-SEP-2012 16:17:16
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=gabylan)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
================================================================================
My "hosts" File: (c:\windows\system32\drivers\etc\hosts)
# localhost name resolution is handled within DNS itself.
#     127.0.0.1 localhost
#     ::1 localhost
192.168.5.5          gabylan          gabylan
=================================================================================
c:\Users\Public\myscripts>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : gabylan
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b8f5:bbb0:cf8b:c735%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.5.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 335675468
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-B7-78-52-00-25-22-51-68-AB
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-25-22-51-68-AB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7538:173c:c202:4985%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, September 18, 2012 11:37:37 AM
Lease Expires . . . . . . . . . . : Wednesday, September 19, 2012 1:45:01 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 234890530
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-B7-78-52-00-25-22-51-68-AB
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
=================================================================================
# sqlnet.ora Network Configuration File:
# c:\app\oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\sqlnet.ora
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
# OTHER OPTION FOR AUTHENTICATION IS: SQLNET.AUTHENTICATION_SERVICES= (NTS)
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME, EZCONNECT)
ADR_BASE = c:\app\oracle\
====================================================================================
# tnsnames.ora Network Configuration File:
# c:\app\oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\tnsnames.ora
orcl =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = gabylan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
====================================================================================
# listener.ora Network Configuration File:
# c:\app\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gabylan)(PORT = 1521))
SID_LIST_LISTENER =
     (SID_LIST =
          (SID_DESC =
     (ORACLE_HOME = c:\app\oracle\product\11.2.0\dbhome_1)
     (SID_NAME = orcl)
ADR_BASE_LISTENER = c:\app\oracle
=================================================================================
c:\Users\Public\myscripts>ping gabylan
Pinging gabylan [192.168.5.5] with 32 bytes of data:
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Reply from 192.168.5.5: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.5.5:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
=================================================================================
Some related environment variables on my system:
COMPUTERNAME=GABYLAN
FP_NO_HOST_CHECK=NO
HOMEPATH=\Users\oracle
LOGONSERVER=\\GABYLAN
ORACLE_HOME=c:\app\oracle\product\11.2.0\dbhome_1
ORACLE_HOSTNAME=gabylan
ORACLE_SID=orcl
ORACLE_UNQNAME=orcl
SQLPATH=c:\users\public\myscripts
USERDOMAIN=GABYLAN
USERNAME=oracle
USERPROFILE=C:\Users\oracle
==================================================================================
Summary from V$INSTANCE VIEW:
INSTANCE
NAME    HOSTNAME STARTUP_T STATUS DATABASE_STATUS ACTIVE_ST
orcl GABYLAN STARTED      ACTIVE NORMAL
=================================================================================
Thanks,
Gabriel

I am getting the same error while starting or stopping the listener
LSNRCTL> start CSCLIST
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> stop CSCLIST
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CSCINDAE708070)(PORT=152
2)))
NL-00303: syntax error in NV string
TNS-01153: Failed to process string: (DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)
(HOST=)(USER=Manager(REMOVE)))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=CSCLIST)(VERS
ION=186646784)))
Pls help
Listener.ora:
# listener.ora Network Configuration File: D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
CSCLIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CSCINDAE708070)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_CSCLIST =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\bin\oraclr11.dll")
ADR_BASE_CSCLIST = D:\Sagaya\11gDBhome

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

General Inquiry Regarding Error Handling with System Exec.vi

I have a sub vi that uses the System Exec.vi to send SMS messages when triggered. I am confused as to how the error handling works and why all of the errors seem to go to the "standard error" vs the "Error out". The reason I am interested is because I am trying to interrupt the error out of another script to execute a command if error=true.
I have intentionally created an error to test this, however it does not seem that the signal is ever being sent to the error out, only to the standard error.
Any help/explanation as to how this works would be greatly appreciated.

The Facebook discussion board is just a pilot and that functionality is not available yet (as to my knowledge). You will have to use the actual forum thread to add attachments. You can click the arrow just to the right of thread topic in the Facebook thread and that will take you to the ni.com/forums thread. Or you can navigate here:
http://forums.ni.com/t5/LabVIEW/General-Inquiry-Regarding-Error-Handling-with-System-Exec-vi/m-p/246...
Having a look at your VI would help to clarify the error handling issue.
Daniel K | NI Applications Engineer | Certified LabVIEW Developer

Search help: Internal Error.

Hi,
I am getting information message : 'Search help: Internal Error' after incorporating code in RETURN event. My aim was to populate the value from Hit list to Value with restriction field and then by removing some search select criteria, again display the hit list. It is coming back to the value with restriction field screen also populating the fields properly, below 1 information message is coming 'Search help: Internal Error'. If I remove some field from selection and again press the go button, it is doing nothing and system is hanging. The details are given below.
I have created one search help ZTMVGR1 having the following details:
Search help type : Elementary.
Selection Method : MVKE
Search help exit: ZF4_MATGRP_EXIT1.
Display value with restrictions : A
Field          Import           EXPORT   LPOS      SPOS   SDis     Data Element
MATNR       X                   X              5             5                     MATNR
VKORG      X                   X              1              1                     VKORG
VTWEG      X                   X              2              2                     VTWEG
MVGR1      X                   X               3             3                      MVGR1
KONDM      X                   X               4             4                      KONDM
MAKTX      X                   X               6              0                     MAKTX
In the search help exit ZF4_MATGRP_EXIT1 I have used three events:
1) PRESEL : Purpose of using this was I was not able to see F4 help for few fields in value with restriction screen . I found out that in SHLP-INTERFACE-F4FIELD is equal to 'X', sometimes in search help if that field's value is 'X' , F4 help does not come even if check table exists for that field.
2) DISP : Purpose, I want to fetch material description field in exit only. MAKTX does not exist in MVKE, so either I need to create a view containing all my fields, or populate the one which is not there in selection method in exit.
3) Return : Purpose, I want to put VKORG, VTWEG and MATNR ( MATNR has collective search help, based on material description , we can put material ) . The hit list we get contains VKORG, VTWEG, MATNR, KONDM, MVGR1 and MAKTX. When we double click on hitlist the value returns , I want to populate these entries in value with restriction field. So KONDM and MVGR1 field will be populated. Now I will remove the value of material-low from selection screen and find out for VKORG, VTWEG and MVGR1/KONDM what materials are there. But after writing the code for event RETURN I am getting information message 'Search Help: Internal Error'.
My code snippet is given below.
<removed by moderator>
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on May 13, 2011 1:35 PM

HI,
In search help exit you need to use the below mentioned function modules
'F4UT_PARAMETER_ALLOCATE'          For allocating fields
'F4UT_PARAMETER_VALUE_GET'       Get Value
'F4UT_PARAMETER_RESULTS_PUT'     put Value
In the same order.
Thanks & regards,
Bhargav.

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

Need help with Error SBL-DBC-00111 with SBL-EAI-04375

Hi
Anyone understand what are these errors?
{http://www.siebel.com/ws/fault}errorstack:<siebelf:error><siebelf:errorsymbol/><siebelf:errormsg>Method 'AssocCurrentRow' of business component 'Contact' (integration component 'Account_Contact') for record with search specification '[External System Id] = "01270912105041"' returned the following error:"An error has occurred writing to a record.
Please continue or ask your systems administrator to check your application configuration if the problem persists.(SBL-DBC-00111)"(SBL-EAI-04375)</siebelf:errormsg></siebelf:error>
Second:
{http://www.siebel.com/ws/fault}errorstack:<siebelf:error><siebelf:errorsymbol/><siebelf:errormsg>Method 'WriteRecord' of business component 'Contact' (integration component 'Account_Contact') for record with search specification '[External System Id] = "01260913075201"' returned the following error:"An error has occurred writing to a record.
Please continue or ask your systems administrator to check your application configuration if the problem persists.(SBL-DBC-00111)"(SBL-EAI-04375)</siebelf:errormsg></siebelf:error>
This error was observed while doing AccountInsertChild operation using Web Service.
Thank you for all the help.
regards
Raghu
Edited by: user641158 on Dec 19, 2008 3:35 PM

I have the same with OpportunityInsert in WS 2.0. No idea.

Help Regarding error (TNS)

Similar Messages

Maybe you are looking for