Help regarding load

Hi all,
i Have a datasource for GL4.. it contians HUGE amount of data.
  We are trying to do a init with data transfer giving   selections for fiscvar like
  package 1: 001.1990 to 016.2001
  package 2: 001.2002 to 016.2003
  package 3: 001.2004 to 016.2005
  package 4: 001.2006 to 016.9999
all the packages are init.
but it gives short dump 4 the first package itself
my question is:
1. which is the most efficient way to load the data.
2. for larger dataloads, what processing type is the best.
please help as it important

Hi Ashwin,
First check at source system side (T.code : RSA3).…how may records will come for specified intervals..…
And also you are getting the short dump…. So please check reasons at T.code ST22 if it was space problem then inform to basis people to add extra space ….. for data marts and PSA…
If you are getting the Max no.of records, then load the historical data by intervals, after that initialize it… and extract the new data by delta update method…
Regards,
PRK

Similar Messages

  • Need help regarding icon loading

    can i get help regarding icon loading in oracle forms???

    ok make a folder name it icons and copy all u r gif icons and paste in the same folder(icons) and then copy the icons folder and paste in
    D:\DevSuiteHome_1\forms\java\oracle\forms
    when u want to display icon then do not use .gif(Note: sometimes also works with .gif) and one thing more becare about capital letter of gif-icons.it should be in small letter.i hope u understand.
    sarah

  • I need help regarding installation of Netweaver 2004s

    Hi,
    I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
    " SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      guistart   : true
      command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
    load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
    guiengine: login in process...............................
    guiengine: login timeout; the client was unable to establish a valid connection
    Exit status of child: 1"
    Regards,
    Farooq Shaik.

    Hi
    Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

  • Regarding Loading Grp

    Hi All
    How is the loading group determined in the sales or delivery?

    Hi Kiran,
    1)You can define the loading group in SPRO by using the following menu path
    2)Logistics ExecutionShippingBasic Shipping Functions--Define Loading Group.
    3)You can also define the loading group in the Material Master Data  in the Sales Gen Plant Data view.
    4) The loading group tells you how your material will be picked it is also used in the determination of the shipping point rule and also in the determination of the plant.
    5) The loading group does not come in the sales order or the delivery it is used in the determination of the shipping point and the plant which does come in the sales order...
    Do reward points if this helps
    Regards
    Atul Keshav

  • Need help regarding Java decoding of IMAP attachment (IOStream related ques

    Hi ,
    I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
    I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
    java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
         at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
         at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
    ***Here is the snippet of code that is running this:***
    m_contentObj = m_message.getContent();
    if(m_contentObj instanceof InputStream)
         System.out.println(" Content is type of InputStream");
         InputStream stream = (InputStream) m_contentObj;
         byte[] tempBuffer = new byte[m_maxDataSize];
         stream.skip( m_currPos );
         int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
         System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
         m_currPos+=     bytesRead;
    Please suggest what to do.
    Thanks & Regards
    Saurabh

    BUMP, just incase its been missed by a new board member

  • My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

    My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

    Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

  • Help regarding :Video Segmentation & Summerization

    hello friends,
    I am doing my project on above topic and I am trying it with Java.
    Is it possible doing it in Java.
    What Techniques I'm using are:
    1.Java(JMF)
    2.Oracle 9i(Inter-Media)
    3.Matlab
    This project concludes of four parts
    1.Segmentation (Video to Image conversion)
    2.Comparison (Copare frame using algo.)
    3.Extraction (remove duplicate frames based on algo)
    4 Summarization (Collect frames and form a new content based video)
    Is It possible in Java? How?
    Seeking for help regarding this .
    Thank you.

    This project concludes of four parts
    1.Segmentation (Video to Image conversion)
    2.Comparison (Copare frame using algo.)
    3.Extraction (remove duplicate frames based on algo)
    4 Summarization (Collect frames and form a new content based video)So, compressing that into a simple question instead of a convoluted one... you just want to remove duplicate frames from a video and save it to file?

  • Help Regarding Xi integrating with Seibel System.

    HI @,
    I have to intergrate a seible system with R/3 but I haven't worked on the same before.
    I need help regarding seibel inetrgartion scenarions and various adapters that can be used in that conditions.
    Documents on Seible Integration will b really helpful.
    Regards

    It would be better to go for the iway adapter for this integration requirement. The other documents can be obtained direclty from iway
    Regards,
    Prateek

  • Help regarding MBeanServerConnection queryName function

    Hi guys, i recently start using JMX and i need some help regarding queryName function. I want to get a specific set of objectNames, not all of them.
    I have the following List of Beans
    ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=14b69d-eee40f3d6467,name=LoadBalancerServer
    ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=40-a0b2-f1dfb314406f,name=LoadBalancerServer
    ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=98-4af4-9147-bf45fb49c044,name=LoadBalancerServer
    ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=c-4bf6-9c42-d5c3acea6662,name=LoadBalancerServer
    ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,name=LoadBalancerListener
    ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,name=LoadBalancerRedirector
    ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=IOPerformance
    ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=MediaCache
    ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=PendingReadAheadRequestTracker
    ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=PendingWriteRequestTracker
    ObjectName = WowzaMediaServerPro:name=Connections
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=Connections
    ObjectName = WowzaMediaServerPro:name=HandlerThreadPool
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=HandlerThreadPool
    ObjectName = WowzaMediaServerPro:name=IOPerformance
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=IOPerformance
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=IOScheduler
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=chat,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=default,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=file,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-record,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-record-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-buffer,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge-origin,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-origin,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=netconnection,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=record,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-record,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-record-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-record,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-record-lowlatency,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtpout,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-buffer,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-buffer-record,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-record,name=Properties
    ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=Properties
    ObjectName = WowzaMediaServerPro:name=Server
    ObjectName = WowzaMediaServerPro:name=ServerNotifications
    My question is that , how can i get those rows that contains "WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers"?
    Please help

    Hello ,
    There should be a number of BRF+ tutorials available in SCN which discuss the FDT APIs. You can have a look at them to get an idea of the various APIs available and their uses.
    For your usecase, you should do the following.
            lo_fdt_function         TYPE REF TO if_fdt_function,
            lo_fdt_result           TYPE REF TO if_fdt_result,
    * Get function handle
          CALL METHOD lo_fdt_factory->get_function
            EXPORTING
              iv_id       = lv_function_id
            RECEIVING
              ro_function = lo_fdt_function.
    where lv_function_id is the GUID of the BRF+ function . You can either make it a constant , or you can use a FDT API to get the function GUID from the BRF+ application name and function name.
    *   Set function context
        TRY.
            CALL METHOD lo_fdt_context->set_value
              EXPORTING
                iv_id    =
                ia_value =
    This is one way to set the input context ( pass the input to the BRF+ function to process ). There are other ways to do this as well. Which one you use would depend on the kind of input you want to pass.
    * Execute BRFPLUS function
      TRY.
          CALL METHOD lo_fdt_function->process
            EXPORTING
              io_context = lo_fdt_context
            IMPORTING
              eo_result  = lo_fdt_result.
    * Get result output
      TRY.
          CALL METHOD lo_fdt_result->get_value
            IMPORTING
              ea_value =
    Another direct way of doing it would be to use the method PROCESS of the class CL_FDT_FUNCTION_PROCESS.
    I have not gone into much explaination here , but it should provide you an idea of how you can go about it.Read the SCN docs on the APIs to get a better idea , or better still if you can get hold of a copy of the BRF+ book by Carsten Ziegler , you will get an end to end explaination of all BRF+ APIs in it.
    Regards,
    Indranil.

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • Help regarding ABAP and ABAP Objects

    Dear all,
    I am very new in abap and abap objects. But i have some expr. in other language..specialy development. Right now i am working for srm module...So i want to move my self into abap object and specialy in workflow...Please provide me help regarding this...along with the starting point for this.
    Best Regards
    Vijay Patil

    hi
    Object Oriented prg
    A programming technique in which solutions reflect real world objects
    What are objects ?
    An object is an instantiation of a class. E.g. If “Animal” is a class, A cat
    can be an object of that class .
    With respect to code, Object refers to a set of services ( methods /
    attributes ) and can contain data
    What are classes ?
    A class defines the properties of an object. A class can be instantiated
    as many number of times
    Advantages of Object Orientated approach
    Easier to understand when the system is complex
    Easy to make changes
    Encapsulation - Can restrict the visibility of the data ( Restrict the access to the data )
    Polymorphism - Identically named methods behave differently in different classes
    Inheritance - You can use an existing class to define a new class
    Polymorphism and inheritance lead to code reuse
    Have a look at these good links for OO ABAP-
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com.
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    check the below links lot of info and examples r there
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.geocities.com/victorav15/sapr3/abap_ood.html
    http://www.brabandt.de/html/abap_oo.html
    Check this cool weblog:
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    these links
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    For funtion module to class
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
    for classes
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    for methods
    http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
    for inheritance
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
    for interfaces
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
    For Materials:
    1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
    2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
    6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
    7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
    8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
    1) http://www.erpgenie.com/sap/abap/OO/index.htm
    2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    Hope this helps
    if it helped, you can acknowledge the same by rewarding
    regards
    ankit

  • Need help regarding converting text to Lines and Arcs.

    In my program i have text.Lets say the text is JAVA.
    Now i need to group that text(JAVA) in the form of line and arcs.
    Its like organizing lines and arcs and make it looks like a text(JAVA).
    Can we have such a possibilities to do that?
    Please help regarding this!!
    Thanks in Advance.
    Boopathy.

    Have a look at TextLayout class (http://java.sun.com/javase/6/docs/api/java/awt/font/TextLayout.html)
    Graphics2D g = ...;
    Point2D loc = ...;
    Font font = Font.getFont("Helvetica-bold-italic");
    FontRenderContext frc = g.getFontRenderContext();
    TextLayout layout = new TextLayout("This is a string", font, frc);
    Shape shape = layout.getOutline(null);
    Edited by: AlexeyUshakov on Sep 29, 2008 8:46 AM

  • Need Help Regarding Enabling The Matrix

    Hi All,
    We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
    Regards,
    Jayanth

    Hey first bind the columns of matrix to any user datasource
    and then you can enter any thing into your matrix 
    following code may help
    suppose you have one column
    oForm = SBO_Application.Forms.Item("URFRM")
    oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
    SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
    oMatrix=oForm.Item("URMATRX")
    oMatrix = oItem.Specific
    oColumns = oMatrix.Columns
    oColumn = oColumns.Item("URCOLName")
    oColumn.DataBind.SetBound(True, "", "URDSName")
    oMatrix.Addrow()
    hope this will help
    additionally you can look at this sample
    .....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

  • Need Help Regarding JAVA BEAN

    Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
    thanks in advance
    Rehan MIrza

    Here is a good link that indicate that JavaBean is not only for applets
    http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
    quote:
    The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
    Francois

  • Need help in loading master data.

    Hi everyone,
              I am just a beginner in BI 7.0 . I know Bw 3.5 . I need help in loading master data(flat file) in a step by step manner.
    Before posting this forum i searched and checked out other related forums too, as i am a beginner i am unable to follow them. Lots of the forums gave the help.sap.com link which i used and got a little help but not fully, so please don't send that link.  I need a step by step guideline from somebody, which says everything from the beginning till monitoring say like
    e.g.. 1) create a InfoObject by right clicking on InfoObject catalog.
    something like that.
    please help me get a clear and detail step by step procedure to load a master data (Flat File should be good) which may help me get a start will other things without much help.
    Please help me learn.
    Thanks.
    Ranjani.

    HI,
         Thanks for your reply. This is what i did.
    1) Created a Info Area.
    2) Created Info object catalog & activated
    3) created info object with nothing except some 4 attributes.
    4) Created Application compound in Infosource tab.
    5) Right clicked on Application compound and chose create Infosource in which chose a option with 3.x and chose the flexible update and gave the info object name.
    6) In info provider tab , in the Info Area right clicked and chose the Insert char as data target option.
    Now, i am stuck. I have no idea what to do next.
    I know i have to create a transformation - There are two tabs in Transformation box, what should i do there.
    Please help me from point 6 to cont., to load the data.
    Thanks.

Maybe you are looking for

  • Activate text for Cost Center for ME51N, ME52N, ME53N

    Hi, experts As a requirement on T/C ME51N, ME52N, ME53N is needed to activate on "Account assignment" tab, the text for Cost Center field, how can I do this? Thanks in advance. Is there any path or exit could help with it?

  • Simple introduction/tutorial on how to make Cocoa-Applescript Applets?

    I'm looking for a simple tutorial on how to make Cocoa-Applescript Applets.  I'm pretty new to Applescript, but fairly good at it, and I was wondering how Cocoa-Applescript Applets worked.  I was curious as I've been wondering if it was possible to s

  • Export reports as pdf with a dynamic name

    Hi all, I am fairly new at APEX and this sums my situation and questions. I created a small app that shows invoice information. I created a 'report query' and a 'rtf query layout' and was able to create a export button to save it as pdf. 2 questions

  • How Did I Do It?  Oil Painting Effect- Really Realistic!

    I'm sure I was using PS CS3 32 bit on Windows XP when I did this... Notice in the model's hair the shiny reflections of the thick "oil" brush strokes.  I have used Eye Candy and Photo Tools before, but about all I find when I search now is pixel bend

  • No such interface supported (OpenDocument)

    I'm trying to open a document (written on deski) like many examples I've seen on the web. However I keep getting an error on the last line: System.InvalidCastException was unhandled Message=No such interface supported I'm using BOXI 3.1 Am I doing so