HELP regarding Planning

Hi All,
I need your help very urgently.Here is my scenario:
I have created a planning application and some 10-12 forms.Everything was working fine. Then by mistake I clicked on enable Workforce planning, which created new dim called employee and some forms by default. Then I deleted all the newly created forms and new dim(From SQL as well). Now everything related to Workforce is not there in my planning applcation and Essbase as well, but all of my forms are turned into READ ONLY .. I am in BIG trouble as I dont have any backup of this application.
Please HELP me....
Thanks in advance
..CJ

Hi,
The only warnings I have before using scripts to change the relational piece are :-
Make sure you have backed up all the planning app.
Also be totally sure that the script you are running is suited to the version of planning you are using, the relational side has changed slightly through each release hence why there are so many upgrade scripts.
Plannng is so heavily reliant on the relational database and making an incorrect change could potentially damage the application and pretty much void support on it.
Cheers
John

Similar Messages

Need a help regarding planning layout

Hi,
I am designing a planning layout in OPO1. I have defined a column for Cost Eelemnt and next four columns with Period and Fiscal years, for these each column in the header line, i typed "&$1". Also created a Total Forecasted column for the sum of these four columns. While Saving the layout getting error as "Text variable &$1 has an invalid replacement rule." When checked the message, under procedure it says "If you want the replacement to occur as specified, you must define the missing characteristic in the layout. Otherwise enter a characteristic which has already been selected."
It would be great, if any one can tell about defining the missing characteristics in steps.
Regards,
Naren.

Hi Sampath,
Planning layouts are basically used for planning the costs, here you can define user defined layouts ana assign the same to planner profile..
after that, you can default the planner profile KPO4 and run the t-code CJR2 to plan the costs.
Basically it is used for cost planning
Rgds
Sudhir Reddy

Reg: Provide the best possible Scenarios regarding Planning feature of Analysis office as given below

Hello Everyone,
I am able to save the data back to the target from analysis workbooks using the Planning feature of the tool.
Please, can anyone Provide the best possible Scenarios regarding Planning feature of Analysis office.
Any answer is appreciable
Regards,
Karteek

Hi
Thank you for your post.
The reason why your contacts didn't display is currently the Tamil language is not supported by the Windows 7.5 OS and we do not have any information if this language will be supported in the future or not. The current list of supported languages are:
Brazilian Portuguese, Chinese (simplified and traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian, Japanese, Korean, Norwegian (Bokmål), Polish, Portuguese, Russian, and Swedish.
In regards to being a smart phone, these come from a variety of manufactures using a variety operating systems each having there own unique way of functioning and features and as such it is the responsibility of the consumers to make an informed choice on what device would suit them based on specifications of the device which includes hard ware or software. There is no unified smartphone requirements as each use's different operating systems.
So when purchasing a new device it is advisable to do some research on what device would suit your needs and if need be to speak to your local authorised mobile phone retailers for there expert advice. If at the point of purchase you were mis-advised and told that the Windows OS did support the Tamil language then this is something you will need to go back to the point of purchase otherwise it is your responsibility to make sure you choose a device that fully suit your needs.
Regards
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Help regarding Inventory related concurrent managers to be assigned

Hi,
I am looking for a help regarding the below aspects
1)Which concurrent managers needs to be assigned to run the following five concurrent programs.
INV Transaction Worke
Inventory transaction worker
Interface Trip Stop
Min Max report planning
Pick selection List Generation
2)We are facing issues with the above jobs. Currently except Inventory transaction worker all the other concurrent programs are running under standard manager.
because of which Min max planning report programs are piling up under standard manager. Min max programs were going to “Pending” status and never getting picked up as they were waiting for other programs in the queue to get finished. There were thousands piled up after the environment was bring up.
How can we solve this issue.. please suggest

835129 wrote:
The metalink notes you provided didnt gave me any information about the concurrent managers under which these programs should run. Any help regarding concurrent managers would be helpfulI believe you have not read my reply properly since I mentioned "WIP Move Manager and Inventory Manager". Plus, the docs mention it clearly so please read it again!
Thanks,
Hussein

Need help regarding Cycle counting

Hi All,
I need your help regarding cycle counting process in SAP PI. The scenario is as follows,
At present in the legacy system business practice is to count certain number of materials say 100 materials every day. Out of these 100 materials; we keep fixed percentage for the materials to be counted i.e. out of 100 certain percentage will of A material, certain percentage will of B materials like wise.
Also every day we want to generate a list of these 100 materials to be counted (this list can be handed over to inventory person to physically count the material) and generation of PI documents to subsequently post the count results.
Please note that we will be manually assigning cycle count indicator (A or B or C etc) in the material master.
Thanks,
Attarde

from OSS Note 518418 - FAQ: Cycle Counting
3. Question:
I do not understand the determination of the date of physical inventory in the cycle counting physical inventory. How is the planned date or the date of physical inventory determined in the SAP system?
Answer:
In principle, the program calculates the planned date of physical inventory according to the following formula:
   planned date = base date + Interval (Trans.OMCO/Tab.XT159C-ININV)
Usually, the base date is the 'date of the last physical inventory'. Depending on the type of the stock or the batch management requirement, this date is read from one of the following table fields:
MARD-DLINL (Normal materials)
   MCHB-CHDLL (Batch materials, separately valuated materials)
If no physical inventory has been carried out yet and if this date field is therefore empty, the system uses the creation date of the material as basis date. The basis date then comes from one of the following table fields:
MSTA-ERSDA (Normal materials)
   MCHB-ERSDA (Batch materials, separately valuated materials)
Since the cycle counting physical inventory always runs for the current fiscal year, the earliest possible physical inventory date is the 01.01. and the latest possible physical inventory date is the 31.12 of the current year.
If the date of the physical inventory is a non-working day, the program automatically proposes the next possible workday.

Need help regarding Java decoding of IMAP attachment (IOStream related ques

Hi ,
I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
     at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
     at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
***Here is the snippet of code that is running this:***
m_contentObj = m_message.getContent();
if(m_contentObj instanceof InputStream)
     System.out.println(" Content is type of InputStream");
     InputStream stream = (InputStream) m_contentObj;
     byte[] tempBuffer = new byte[m_maxDataSize];
     stream.skip( m_currPos );
     int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
     System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
     m_currPos+=     bytesRead;
Please suggest what to do.
Thanks & Regards
Saurabh

BUMP, just incase its been missed by a new board member

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

Help regarding :Video Segmentation & Summerization

hello friends,
I am doing my project on above topic and I am trying it with Java.
Is it possible doing it in Java.
What Techniques I'm using are:
1.Java(JMF)
2.Oracle 9i(Inter-Media)
3.Matlab
This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)
Is It possible in Java? How?
Seeking for help regarding this .
Thank you.

This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)So, compressing that into a simple question instead of a convoluted one... you just want to remove duplicate frames from a video and save it to file?

Help Regarding Xi integrating with Seibel System.

HI @,
I have to intergrate a seible system with R/3 but I haven't worked on the same before.
I need help regarding seibel inetrgartion scenarions and various adapters that can be used in that conditions.
Documents on Seible Integration will b really helpful.
Regards

It would be better to go for the iway adapter for this integration requirement. The other documents can be obtained direclty from iway
Regards,
Prateek

Help regarding MBeanServerConnection queryName function

Hi guys, i recently start using JMX and i need some help regarding queryName function. I want to get a specific set of objectNames, not all of them.
I have the following List of Beans
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=14b69d-eee40f3d6467,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=40-a0b2-f1dfb314406f,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=98-4af4-9147-bf45fb49c044,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=c-4bf6-9c42-d5c3acea6662,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,name=LoadBalancerListener
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,name=LoadBalancerRedirector
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=IOPerformance
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=MediaCache
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=PendingReadAheadRequestTracker
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=PendingWriteRequestTracker
ObjectName = WowzaMediaServerPro:name=Connections
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=Connections
ObjectName = WowzaMediaServerPro:name=HandlerThreadPool
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=HandlerThreadPool
ObjectName = WowzaMediaServerPro:name=IOPerformance
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=IOPerformance
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=IOScheduler
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=chat,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=default,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=file,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-record-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-buffer,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge-origin,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-origin,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=netconnection,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-record-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-record-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtpout,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-buffer,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-buffer-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=Properties
ObjectName = WowzaMediaServerPro:name=Server
ObjectName = WowzaMediaServerPro:name=ServerNotifications
My question is that , how can i get those rows that contains "WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers"?
Please help

Hello ,
There should be a number of BRF+ tutorials available in SCN which discuss the FDT APIs. You can have a look at them to get an idea of the various APIs available and their uses.
For your usecase, you should do the following.
        lo_fdt_function         TYPE REF TO if_fdt_function,
        lo_fdt_result           TYPE REF TO if_fdt_result,
* Get function handle
      CALL METHOD lo_fdt_factory->get_function
        EXPORTING
          iv_id       = lv_function_id
        RECEIVING
          ro_function = lo_fdt_function.
where lv_function_id is the GUID of the BRF+ function . You can either make it a constant , or you can use a FDT API to get the function GUID from the BRF+ application name and function name.
*   Set function context
    TRY.
        CALL METHOD lo_fdt_context->set_value
          EXPORTING
            iv_id    =
            ia_value =
This is one way to set the input context ( pass the input to the BRF+ function to process ). There are other ways to do this as well. Which one you use would depend on the kind of input you want to pass.
* Execute BRFPLUS function
TRY.
      CALL METHOD lo_fdt_function->process
        EXPORTING
          io_context = lo_fdt_context
        IMPORTING
          eo_result = lo_fdt_result.
* Get result output
TRY.
      CALL METHOD lo_fdt_result->get_value
        IMPORTING
          ea_value =
Another direct way of doing it would be to use the method PROCESS of the class CL_FDT_FUNCTION_PROCESS.
I have not gone into much explaination here , but it should provide you an idea of how you can go about it.Read the SCN docs on the APIs to get a better idea , or better still if you can get hold of a copy of the BRF+ book by Carsten Ziegler , you will get an end to end explaination of all BRF+ APIs in it.
Regards,
Indranil.

Need HELP regarding installinfg CR2008/Visual Advantage

I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

Hi Shamish
Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
Best regards
Michael

Help regarding ABAP and ABAP Objects

Dear all,
I am very new in abap and abap objects. But i have some expr. in other language..specialy development. Right now i am working for srm module...So i want to move my self into abap object and specialy in workflow...Please provide me help regarding this...along with the starting point for this.
Best Regards
Vijay Patil

hi
Object Oriented prg
A programming technique in which solutions reflect real world objects
What are objects ?
An object is an instantiation of a class. E.g. If Animal is a class, A cat
can be an object of that class .
With respect to code, Object refers to a set of services ( methods /
attributes ) and can contain data
What are classes ?
A class defines the properties of an object. A class can be instantiated
as many number of times
Advantages of Object Orientated approach
Easier to understand when the system is complex
Easy to make changes
Encapsulation - Can restrict the visibility of the data ( Restrict the access to the data )
Polymorphism - Identically named methods behave differently in different classes
Inheritance - You can use an existing class to define a new class
Polymorphism and inheritance lead to code reuse
Have a look at these good links for OO ABAP-
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
ankit

Need help regarding converting text to Lines and Arcs.

In my program i have text.Lets say the text is JAVA.
Now i need to group that text(JAVA) in the form of line and arcs.
Its like organizing lines and arcs and make it looks like a text(JAVA).
Can we have such a possibilities to do that?
Please help regarding this!!
Thanks in Advance.
Boopathy.

Have a look at TextLayout class (http://java.sun.com/javase/6/docs/api/java/awt/font/TextLayout.html)
Graphics2D g = ...;
Point2D loc = ...;
Font font = Font.getFont("Helvetica-bold-italic");
FontRenderContext frc = g.getFontRenderContext();
TextLayout layout = new TextLayout("This is a string", font, frc);
Shape shape = layout.getOutline(null);
Edited by: AlexeyUshakov on Sep 29, 2008 8:46 AM

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Need Help Regarding JAVA BEAN

Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
thanks in advance
Rehan MIrza

Here is a good link that indicate that JavaBean is not only for applets
http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
quote:
The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
Francois

HELP regarding Planning

Similar Messages

Maybe you are looking for