Help regarding SGOSDS function group (attaching Notes and all)

Hi All,
we have a requirement where in BSP page we have to attach Notes and also some URLs to one particualr service ticket at the time of creation of that service ticket in BSP.
now user again wants to look at that created note and attached URLs.
In R/3 to do this there are function modules in function group SGOSDS.
is there any way to use the same functionality to attach and display these Notes and URL.
Thanks in Advance,
Vithal

Hi,
Any existant FM can be called from the BSP via the system itself or if you want to do this via RFC (see http://help.sap.com/saphelp_bw31/helpdata/en/22/042537488911d189490000e829fbbd/frameset.htm for this).
You have to create the screens on your own though.
Eddy

Similar Messages

All The Notes and All my personalized Mailboxes and Smart mailboxes have disappeared

When I woke up my MacBook Pro and wanted to check email, all The Notes and All my personalized Mailboxes and Smart mailboxes have disappeared.
I only have the standard mailboxes like inbox, sent, trash, etc...
Anyone can help with this?
Thanks
Short background:
I have upgraded recently from Snow Leopard to Lion.
I have lost a lot of software (and had to re-purchase licences and re-install it) but then I have said to myself BE IT! great that I did not lose critical stuff.
I have also said that I will do the Time Machine back-up when everything is working fine....
Well, I think I was a bit too quick with my statement and too slow with the back-up...
Mugur

You are not getting them from there, you just verifying if you have a back up with notes (you will have to check the date and try to remember if had those at that date and time.) Then you have two ways to go - the apple way and third party way.
1 Apple way - restore from back up (downside is you going to lose changes to your phone since the last back up)
be careful - not to overwrite last back up when you connect your phone, I would find and copy back up file just in case to external drive. You can find location of your actual back up file using that article
http://support.apple.com/kb/HT4946
if you expand where it says "where back ups are stored on the computer"
how to restore from itunes back up here
http://support.apple.com/kb/HT1766
2. not Apple way.- there are programs for windows that allow you to look inside of actual back up file.
Google is your friend for that one.
If you don't like my results just adjust search to your liking.
https://www.google.com/webhp?sourceid=chrome-instant&rlz=1C1_____enUS481US481&io n=1&ie=UTF-8#hl=en&safe=off&tbo=d&rlz=1C1_____enUS481US481&sclient=psy-ab&q=how% 20to%20look%20inside%20of%20iphone%20back%20up&oq=&gs_l=&pbx=1&fp=87ac1fa8918878 c8&ion=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.1357700187,d.aWM&biw=1280&bih=643

I have lost my new iPhone. Please help. I have the IMEI no and all the details that comes at the back of the box.

I have lost my new iPhone. Please help. I have the IMEI no and all the details that comes at the back of the box.

Having the imei won't help you find your phone.
If you setup and enabled find my phone prior to losing it then go to icloud.com
If you didn't set it up - then there nothing you can do.
Call your carrier and let them know, change all your passwords.

I need help restoring the ability to view Youtube and all videos of my 4 year old MacBook after receiviving a meaage the the Adobe ineeds to be updated? Thanks.ng

I need help restoring the ability to view Youtube and all videos of my 4 year old MacBook after receiving a message the the Adobe ineeds to be updated? Thanks.

Did you upgrade whatever product from Adobe was out of date yet?

Regarding Repair Function Group Utility

Hi All,
I am repairing a function group J1I7 coz one of the function module in this function group is having error but only in the production server , in the other server the function group is correct.
Now when I am trying to repair it , it is asking for request in production which is not recommended I guess.
Is it suggested to create a request in production server?
If not then please tell me the way how to repair the function group??
Thanks
Manik L Dhakate

you should not make changes directly in production. since its fine in development, attach it to a transport request and transport from dev to prod.
regarding other question. when you hit edit , its still editable.
its in the modification view. in this mode to edit, youshould place the cursor where you want to add code and clik insert from the application tool bar
if you dont want to work with modification assistant, while in edit mode got the menu
edit->modification operations->switch off assistant.
Raja

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error

Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
    EXPORTING
      im_material = item_matnr
      im_vornr    = item_vornr
      im_sheet    = item_sheet
IMPORTING
      value = ZMESSAGE .

Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen

Icloud notes on my windows 7 PC deletes new notes and all my typing is lost

Hi All,
I have spent 2 hours typing a long document into icloud notes on my Windows 7 PC. I could see the time updating on the left hand side in the notes list for my current note. I also saw the note appear on my iPhone 5, but I did not open or edit it.
After I had finished and reread the long note I clicked on the second note on the left hand side to read that note and the first note I had been working on disappeared completely from the notes list.
This is the fourth time that iCloud Notes has lost my long note.
I write long legal emails into iCloud notes so that I can get up from my PC, take my iPhone or iPad away from my desk and still be able to work on the email. When I finally finish the long note I copy it from notes into my email and send it to the lawyer.
Can anyone help me to recover my long note? Ive spent hours on it.
Also can Apple please fix this bug , it is very frustrating
A long note for me is 3 pages of writing in Word.

Hello janna101
All you need to do is have iCloud Control Panel installed on your PC and turn on the Photos option once you have signed in. After that, just check in your Pictures folder and there will be a section for My Photo Stream.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/dl1455
Regards,
-Norm G.

Functional Module Extractor not pulling all the record on BW side

Hi,
i have written a FM extractor to pull data from CDHDR and CDPOS table. the Records count shows on RSA3 is more than 3,00,000 but while pulling it on BW side it brings only 41,000 Around records.
I steps i have taken is -
tried setting and resetting the package side in Info package.
Tried putting the default package size to 50K in FM setting
but nothing is working.
It seems like the pacet size is not incrementing in the code. i have tired to find ou the fault but coult not and RSA3 is working fine.
can anyone please suggest a correct piece of code or find out where exactly the fault is?

Vikrant,
The structure of your generic extractor function module should be something like:
If initialisation
Store parameters, clear packet count
Else
If first packet
Create cursor
Endif
Read block of records from cursor
If cursor returns no more records
Raise NO_MORE_DATA exception
Endif
Process records from cursor and output
Add one to packet count
Endif
This function module code can get called repeatedly. Possibly you are only extracting data for the first packet?
Mark

Help! Just upgraded to newest version, and all my playlists gone

Hi there,
I wonder whether anyone might be able to help. I've just upgraded to the latest version of itunes and all my playlists have gone. The music, it seems is all intact, but not in the playlists.
This is hours of work! Is there anything I can do to restore my playlists?
Thanks in advance for any help.
All the best,
Sophie

Same here, I lost all mine as well... this seems to be a common problem, so hopefully Apple will get their butts in gear and fix it.

Iphone 3g sync and lost address book, notes and all data

Have an iPhone 3G and synced with itunes yesterday and installed all updates. After the process wqas completed, my phone rebooted and I lost all my address book contents, all notes, and my calendar was wiped clean. Can I get some help in having these items restored?

This is the Mac OS X Technologies > iSync forum. You appear to be a Windows user - also, even on a Mac, iSync is not used for syncing the iPhone.
I'd suggest asking in the iPhone forums:
http://discussions.apple.com/category.jspa?categoryID=201

Need HELP - Need to send MIME attachements, not UU-encoded.

Some important recipients are unable to view attachments I send them b/c Mail, by default, sends UU-encoded attachements instead of MIME attachements.
Is there any way to configure Mail to send MIME attachements?
FYI to any other people having problems SENDING attachements (this took a while to figure out):
Google, Yahoo, and some other mail services are not particularly UU-encoding friendly, and the recipients at those addresses sometimes receive a bunch of garbled 'code' or 'script' instead of the actual attachment file.
I've read lots on these discussions from people trying to deal with READING MIME attachements that other people have sent them, but cannot find any info on switching the SENT preferences to use UU encoding for attachments instead of MIME.
If anyone can clarify, PLEASE, PLEASE HELP.
I use .mac to sync my 2 Mac Pros, MB Pro, iPhone, and three Mac Minis, so I'd really like to keep everything 'in sync' with Apple apps. Otherwise I'll have to switch to Entou-rage or Mozilla, which I don't really want to do...
Thanks in advance for any insight or advice...
- Sarge

I've taken the liberty of re-arranging your question for clarification.
Sarge_ wrote:
Some important recipients are unable to view attachments I send them b/c Mail, by default, sends UU-encoded attachements instead of MIME attachements.
I've read lots on these discussions from people trying to deal with READING MIME attachements that other people have sent them, but cannot find any info on switching the SENT preferences to use UU encoding for attachments instead of MIME.
Which one do you want to use? UU or MIME?
I do not think that Apple Mail sends UU-encoded attachments. UU is really old.
There are two settings that can fundamentally change the way Apple Mail sends messages.
1) Plain text vs. Rich text. With plain text you can't change the fonts or colors or anything else. There is a slight possibility that this mode sends UU attachments, but I can't check from the PC in front of me. Still, I doubt it. Rich text allows fancy fonts and colors.
2) Send Windows-friendly attachments. This will prevent Apple Mail from sending Macintosh-specific information in an e-mail message. In all cases, Apple Mail only sends standards-forming MIME e-mail messages, but many (all?) PC e-mail clients barf on this 100%-legal MIME e-mail message.
Is there any way to configure Mail to send MIME attachements?
Make sure that Windows-friendly attachments is turned on. The only downside is that other Mac users might not get resource data or might have problems with files lacking extensions. No one should be using resource data or files without extensions anymore, so this question is moot. If you do need to do that, wrap your files in a ZIP.
Google, Yahoo, and some other mail services are not particularly UU-encoding friendly, and the recipients at those addresses sometimes receive a bunch of garbled 'code' or 'script' instead of the actual attachment file.
This may happen regardless of what you do.
If anyone can clarify, PLEASE, PLEASE HELP.
Here is a little write-up I did a few years back on this issue. According the the Apple discusssion regulations, I should say that I do sell a MIME-decoding tool through the link above. However, that tool will not help you send MIME e-mail messages. I'm not trying to sell you anything. These days, any decent e-mail client can handle either UU or MIME messages with no problem. There are a few notable exceptions to this, and unfortunately, those exceptions tend to have millions of customers. It is getting better though.

Help regarding VARI() function

Hi All,
    I need more information, and if possible some example on how to use VARI() function.
    Thanks for your help.
Regards,
Shankar

Hi Shankar,
     While VARC function is used to get the number of values available for the
     variable, as Anand mentioned VARI function is used to get the value of the
     variable.Usually they are used in conjunction.
     Here is the sample code:
    DATA L_COUNTRY TYPE 0COUNTRY.
DATA L_COUNT TYPE I.
DATA L_ENTRIES TYPE I.
L_COUNT = 0.
L_ENTRIES = VARC(COUNTRY).
DO.
L_COUNT = L_COUNT + 1.
L_COUNTRY = VARI(COUNTRY, L_COUNT).
{L_COUNTRY,NETSALES} = {L_COUNTRY,VOLUME} * {#,PRICE}.
IF L_COUNT = L_ENTRIES.
EXIT.
ENDIF.
ENDDO.
Hope this helps.
Cheers
Srini

Need urgent help on Special function 8..not working custom program to NACE

Hi gurus,
We wrote one custom program for billing automation(VF01)...scenario is like this....
once PGI is issued system has to create billing document automatically in background using the delivery number.....
we wrote program like this....
DATA:   IT_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
FORM DELIVERY_OUTPUT USING RC US_SCREEN.
DATA V_VBELN LIKE MKPF-XBLNR.
DATA V_DELIVERY LIKE V_VBELN.
DATA:V_MBLNR LIKE LIKP-VBELN.
DATA OBJKY(10).
DATA: VAR(15).
RC = 1.
DATA:   IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
GET PARAMETER ID 'VL' FIELD V_MBLNR.
CONCATENATE V_MBLNR '%' INTO VAR.
SELECT SINGLE OBJKY FROM NAST INTO OBJKY WHERE OBJKY LIKE VAR.
CHECK SY-SUBRC EQ 0.
V_MBLNR = NAST-OBJKY+0(10).
SELECT SINGLE XBLNR FROM MKPF INTO V_VBELN WHERE XBLNR = V_MBLNR.
V_DELIVERY = V_VBELN.
     PERFORM F_DYNPRO USING :
     'X' 'SAPMV60A' '0102',
     ' ' 'BDC_CURSOR' 'KOMFK-VBELN(01)',
     ' ' 'KOMFK-VBELN(01)' V_DELIVERY,
     ' ' 'BDC_OKCODE' '/00'.
     PERFORM F_DYNPRO USING :
     'X' 'SAPMV60A' '0104',
     ' ' 'BDC_OKCODE' '=SICH'.
     CALL TRANSACTION 'VF01' USING IT_BDCDATA MODE 'N'
          MESSAGES INTO IT_MESSAGES.
DATA MSG_LOG LIKE MSG_LOG.
DATA MSG_TEXT LIKE MSG_TEXT.
CLEAR:MSG_LOG,MSG_TEXT.
LOOP AT IT_MESSAGES.
MSG_LOG-MSGID = IT_MESSAGES-MSGID.
MSG_LOG-MSGNO = IT_MESSAGES-MSGNR.
MSG_LOG-MSGTY = IT_MESSAGES-MSGTYP.
CALL FUNCTION 'MESSAGE_TEXTS_READ'
EXPORTING
   MSG_LOG_IMP           = MSG_LOG
IMPORTING
   MSG_TEXT_EXP          = MSG_TEXT.
IF MSG_LOG-MSGTY EQ 'S'.
MESSAGE S398(00) WITH MSG_TEXT-MSGTX.
RETCODE = '0'.
ELSEIF MSG_LOG-MSGTY EQ 'I'.
MESSAGE I398(00) WITH MSG_TEXT-MSGTX.
RETCODE = '0'.
ELSEIF MSG_LOG-MSGTY EQ 'E'.
MESSAGE E398(00) WITH MSG_TEXT-MSGTX.
RETCODE = '4'.
ENDIF.
ENDLOOP.
ENDFORM.
FORM F_DYNPRO USING P_DYNBEGIN P_NAME P_VALUE.
IF P_DYNBEGIN EQ 'X'.
    MOVE : P_NAME TO IT_BDCDATA-PROGRAM,
           P_VALUE TO IT_BDCDATA-DYNPRO,
           'X' TO IT_BDCDATA-DYNBEGIN.
ELSE.
    MOVE: P_NAME TO IT_BDCDATA-FNAM,
          P_VALUE TO IT_BDCDATA-FVAL,
          ' ' TO IT_BDCDATA-DYNBEGIN.
ENDIF.
APPEND IT_BDCDATA.
ENDFORM.
when we assign this program to NACE for output type <b>V2</b> , this program not creating billing documents....
Guide us to resolve this issue....

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Help with compress function--file sizes not substantially reduced

I've tried to use the compress function (right click "compress" or Finder/File/Compress) a few times on files from a variety of different programs. While this results in creating a zip file, the file size is not substantially reduced (e.g., from 43.4 MB to 42.9 MB). Is there a way to change how much a file is compressed?
Thanks in advance for your help.
Eric

Not all material is very compressible. Text files and word processor documents usually compress very well. Photos and movies don't compress much if at all due to the nature of their structure (in some cases, using a general-purpose compressor can actually make a file larger). So it will depend on what it is you're compressing.

Help regarding SGOSDS function group (attaching Notes and all)

Similar Messages

Maybe you are looking for