Help regaurding patch upgradation.

let me tell you the scenario first.
we are having BI 7.0 system and EP system and we have patch no 12 for BW patch and patch no 11 for ABAP.
Now we are tring to load patch 16 for on the system.
so for testing first we were trying to apply patch 13 and in that process we got an error of SPDD and SPAU.
The error is :  Some of the objets have been modified in the system in which 2 objects of Data dictionary (SPDD) and 296 objects in (SPAU).
Please tell me from where can i get this objects list and tell me how can i solve the problem.

Hello
Please use the transaction SE95 where it shows all the Modified Objects with respect to Patch upgradation.
Infact in SPAU transaction also you can get this list
Thanks and Regards
Pushkar

Similar Messages

  • System Core Dumped after Oracle patch upgrade 9.2.0.6 to 9.2.0.8

    Hi,
    We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
    Following is our system environment
    SAP Release.............. "640"
    Application server....... "abci"
    Operating system......... "SunOS"
    Release.................. "5.10"
    Hardware type............ "sun4v"
    Database server.......... "abdb"
    Database type............ "ORACLE"
    Database name............ "ABP"
    Database owner........... "SAPABP"
    SAP kernel............... "640"
    Database version......... "OCI_920 "
    Patch level.............. "175"
    Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
    Runtime Errors         SYSTEM_CORE_DUMPED
    Date and Time          14.04.2008 09:26:17
    ShrtText
         Process terminated by signal 11.
    What happened?
        The current ABAP program had to be terminated because the
        ABAP processor detected an internal system error.
        The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
        processor discovered an invalid system state.
    What can you do?
        Make a note of the actions and input which caused the error.
        To resolve the problem, contact your SAP system administrator.
        You can use transaction ST22 (ABAP Dump Analysis) to view and administer
        termination messages, especially those beyond their normal deletion
        date.
    Error analysis
        An SAP System process was terminated by an operating system signal.
        Possible reasons for this are:
        1. Internal SAP System error.
        2. Process was terminated externally (by the system administrator).
                   Last error logged in SAP kernel
        Component............ "Taskhandler"
        Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
        Version.............. 1
        Error code........... 11
        Error text........... "ThSigHandler: signal"
        Description.......... " "
        System call.......... " "
        Module............... "thxxhead.c"
        Line................. 9780
    How to correct the error
        The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
        contains a file called 'core'.
        Save this file under another name.
        If you cannot solve the problem yourself and you wish to send
        an error message to SAP, include the following documents:
        1. A printout of the problem description (short dump)
           To obtain this, select in the current display "System->List->
           Save->Local File (unconverted)".
        2. A suitable printout of the system log
           To obtain this, call the system log through transaction SM21.
           Limit the time interval to 10 minutes before and 5 minutes
           after the short dump. In the display, then select the function
           "System->List->Save->Local File (unconverted)".
        3. If the programs are your own programs or modified SAP programs,
           supply the source code.
           To do this, select the Editor function "Further Utilities->
           Upload/Download->Download".
        4. Details regarding the conditions under which the error occurred
           or which actions and input led to the error.
    Kindly help.
    Regards
    Sachin
    Edited by: Sachin N on Apr 14, 2008 12:26 PM

    No. If the environment would be wrong the system wouldn´t start up.
    Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
    If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
    Markus

  • 10.2.0.2 Patch Upgrade issue

    hi,
    SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when  i am  doing patch the below problem was occured,
    "Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
    please help me on this issue
    Regards
    Ramesh

    Hai,
    Please check the oraInst.loc file has the correct entry or not.
    File oraInst.loc should have the entries similar to the below:
    inventory_loc=/oracle/SID/oraInventory
    inst_group=dba
    Check the permissions of this file as well, atleast the file should have read access to others.
    Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
    Regards,
    Yoganand.V
    Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

  • Patch upgrade in Source system ECC 6

    Hi,
    We are plannig Patch upgrade in the ECC 6 r/3 System. This is source system for BI7 (NW2004s).
    I want to know, we beibg a BI consultant
    1. What we need to check in ECC on patch upgrade.
    2. What precautions we need to take for better facilitating the patch upgrade in ECC 6
    3. Other related things.
    can someone please reply.

    Hi
    check patch level in BI system :---
    Logon to your SAP System
    SYSTEM>STATUS>Click the search buttion under SAP System Data
    Where you can find your patchelev.
    BI Content and Plug-in Information
    These are the links to get detailed information about BI Content and Plug-in.
    Check the release notes in this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/bc/52a4373f6341778dc0fdee53d224c8/frameset.htm
    Dependencies of BI_CONT Add-Ons: Functional Correspondences
    https://websmp207.sap-ag.de/~sapdownload/011000358700007362962004E/func_corresp.htm
    Dependencies of BI_CONT Add-Ons: Technical Prerequisites:
    https://websmp207.sap-ag.de/~sapdownload/011000358700007362972004E/tech_prereq.htm
    BI Extractors and Plug-in Information:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000682135&
    http://sap.seo-gym.com/copa.pdf
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    /thread/178564 [original link is broken]
    Asset Mgt Data
    http://gnanamax.com/Documents/BI%207.0%20Functional%20Upgrade%20-%20Migration%20points.pdf
    /thread/507115 [original link is broken]
    Go to sap logon pad on the top left side of the logon pad u can see a small click option beside the logon gui for eg: sap logon710 or 640. click on that and select about sap logon there u can c the patch level, build, file name, file version etc,
    Hope it helps
    regards
    gaurav

  • PGW Patch Upgrade

    Hi all, hope you having a good time.
    I have a question about the procedure for PGW patch upgrade, I will perform an upgrade for version 9.7(3) and it is my first time so I need to know if the system has never been patched, do I have to apply all the previous patches or just the last one available 32 or 33 in some cases (is this including the previous ones)???
    Thanks for your kind help in advance.
    Regards,
    Karla

    Hi Karla,
    you don't need to apply all patches. You need to apply the latest ones. Please read this document for more details:
    http://www.cisco.com/en/US/partner/products/hw/vcallcon/ps2152/products_tech_note09186a00801f8213.shtml
    Best Regard,
    Alexei Piskunov

  • Repository connect issue after MDM Patch Upgrade

    MDM Expert
    We recently upgraded our MDM patch from SP06 5.5.63.73 to SP06 5.5.65.91
    after patch upgrade we are not able to connect to repository.SAP is saying that we have wong NLS Character set.It should be 'UTF8' or 'AL32UTF8'
    We checked and found that we do not have character set as per SAP Recommendation but everything was working fine before upgrading the patch.As per SAP in new Patch MDM is lokking for Unicode Character set
    SAP is asking to create new DB Instance for MDM.
    If we create new instance for MDM then how we are going to use our existing repository.Our environment is clustered environment and name of MDM DB instance is also mentioned in cluster.We have to use same Instance name.We are also using oracle failsafe
    Creating new instance seems to be risky for Production environment.Currently we are applying the Patch in Sandbox Environment
    has anyone of you faced this problem while upgrading MDM patch, if yes then how you resolve the issue
    Please help
    Thanks
    Deelip

    Solution provided by sAP

  • Java patch upgrade

    Hi Experts,
    I have a question in regards to Java patch upgrade. Say you are running on SPSxx and there has been a new Java patch released for this SPS that will fix some problem that you are experiencing.
    Should you then only apply the patches for the components BI-BASE-S & BIWEBAPP (which is enough to get the fix applied) or should you apply patches for all components (where the patch is available)?
    Please let me know your recommendations and previous experiences.
    Thank you in advance,
    Mikael

    hi,
    If you are applying only a higher patch for SPS then it is ok to apply it only for the 2 componants mentioned by you.
    Refer below note for more details,
    Note 1072576 - Frequently Asked Questions: BI Java Support Packages/patches
    Award points if helpful
    Regards,
    Niraj

  • Livecache patch upgrade in MSCS environment

    Hello everyone,
    I have installed livecache 7.7.02   BUILD 008-123-149-275 in MSCS and planning to upgrade the patch level to KERNEL    7.7.04   BUILD 029-123-196-543.
    My installation type is,
    Independent Programs directory      - local hard disk
    Independent Data Directory             - distributed disk
    Instance Dependent directory          - local hard disk
    So note Note 508979 - Upgrade of SAP DB/MaxDB/liveCache w/ Cluster MSCS Var.1 applies in my case.
    However, need help in understanding one section of this note,
    Points 14 and 15 talk about  notes on how to run SDBUPD, however do not specify whether SDBUPD is to be run on node B. After manually copying the files to node B, as described in the note, do we still need to run upgrade (SDBUPD) on node 2 ?
    Also, It would be great to have some more reading on Livecache upgrades in MSCS environment.
    Thanks in advance.
    Regards,
    Kiran

    Hello Ivan,
    Thanks for the reply.
    I started upgrading livecache patch as per note 508979. Completed the patch upgrade node 1 using SDBINST. Completed all the steps till step 13. On step 14, I started SDBUPD on node B.
    At this stage I get following message on command prompt,
    Install>SDBUPD -d MLP -u control,<password>
            SAP liveCache INSTANCE UPDATE
    starting installation We, Jun 10, 2009 at 14:59:10
    operating system: Windows AMD64 NT 5.2 Service Pack 2
    callers working directory: C:/Dumps/Latest_Livecache_Kernel/lca600018_livecache-
    win-64bit-x86_64-7_7_04_29
    installer directory: C:/Dumps/Latest_Livecache_Kernel/lca600018_livecache-win-64
    bit-x86_64-7_7_04_29
    archive directory: C:/Dumps/Latest_Livecache_Kernel/lca600018_livecache-win-64bi
    t-x86_64-7_7_04_29
    beginning to check sap db instances
    start new instance update
    The installation remains stuck after this message.
    I ensured xserver and sap instance were stopped before installation. Tried rebooting the server (Node B), but same result.
    Pls can you suggest something on this.
    Regards,
    Kiran

  • XSS patch upgrade

    Hi All,
    We are planning to upgrade XSS patch , could you please let me know initial step .
    How should i need to start what are the prerequisite need to take care .
    Thanks
    Rashi
    Edited by: Rashi on May 20, 2010 9:51 AM

    Hi All,
    Thanks for the support.
    I have successfully done the patch upgrade in dev portal.
    I am facing the issue in custom WD application in QA portal system, in dev portal the application is working fine and after transporting the objects into QA portal ,while on preview the iview its giving me error : "Failed in WD JNDI lookup ".
    I have tested the WD application from Web dynpro console and its working fine , even i have created iview in QA portal and its working fine but while transporting the iview from DEV to QA Portal is not working . Can any one help me on that .
    Details error :
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name home~eth_dis
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:357)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
        at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:442)
        ... 40 more

  • Need help with memory upgrade on Satellite A100-250

    Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 mb.
    I want to buy another slat of memory ddr2-533 512 mb, what exactly model am I necessary to search, that they worked in a pair.
    Sorry for bad english. From Russia with Love.
    PS. I like drink russian vodka :)

    Hay
    Your notebook can be upgraded up to 2 GB and compatible RAM is DDR2-400/533 1GB (PA3411U-1M1G).
    Use this part number in Google and you will find it.
    Bye and dont drink too much Vodka. ;)

  • Please, help! After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.

    Please, help!
    After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
    Thanks

    Have you been trying to download from the app store? Did you get a message?
    As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
    Barry

  • Kernel Patch upgrade results into error

    Recently, we upgraded our R/3 640 kernel from patch number 196 to 327. It went successful.
    But now, the Sales and order team is having problem in saving the orders(VA02, VA01).
    While saving Sales order, error pops up saying "dialog step number missing". 
    Kindly suggest.

    Hi ppl,
    The problem has been resolved.
    As i said, problem wasnt with the upgrade, but came thereafter, functional team faced issues while switching between the windows.
    Problem was with the Gui level, it needed to be upgraded too after the kernel patch upgrade.
    Thanks a lot for putting your thoughts.
    Thanks

  • HT3606 please help me to upgrade my mac osx 10.5.8 to mountain lion

    please help me to upgrade my mac osx 10.5.8 to mountain lion. i am not able to do it.becoz i am not having app store.

    Before you buy anything, first make sure your Mac is compatible.
    Minimum specs for Snow Leopard.  Mac OS X v10.6 Snow Leopard -                 Read the Technical Specifications
    Note.  You can no longer buy Snow Leopard from an Apple retail store, only as follows. 
    If you are in North America ... Last I read, you must call them (1-800-MY-APPLE). It is $29 plus tax for family pack and $19 plus tax for the individual use version.
    In Europe or otherwise … call your National Apple Helpline … http://support.apple.com/kb/HE57
    Once you have bought and upgraded you will need to apply the Combo updater for Snow Leopard.          Mac OS X 10.6.8 Update Combo v1.1
    For Mountain Lion the minimum specs are … technical specifications.
    But if your computer meets those specs you can upgrade to Mountain Lion without any intermediate steps.

  • Need help with Patch Tool in CS5

    I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.

    Thank you very much for these suggestions. Robert
    Noel Carboni <[email protected]> wrote:
    Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
    "Re: Need help with Patch Tool in CS5"
    To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270

  • Please help. Since upgrading the new operating system I cannot manage my music through my car

    Please help. Since upgrading to the new operating system, I cannot play my music on my IPhone 4S. I used to use the USB cable and manage my music that way, now it won't even support the auxiliary cord.

    What happens when you try?
    Have you tried basic troubleshooting from the User's Guide?

Maybe you are looking for