Help repairing reader
40% of our support calls deal with reader not working (50% are people forgetting their passwords and email addresses, and the other 10% is pot-luck).
These people have any myriad of problems. Inevitably, we end up upgrading or repairing their adobe reader installation. It is ridiculous to deal with these people, though. Between having to download 30 megs of application, and talking them through the launch and repair process, it takes hours and hours. (IT pros, you KNOW what I'm talking about)
So, I'm looking for a single-click repair technique or small utility to take care of this. Get everything back to normal, register the reader with installed browsers, so they can use reader again.
Any leads?
It's not too bad a job to replace the CD-ROM on a slot-loading model. I really don't see any reason why not. I can tell your from experience (I've disassembled over 75 of these in the past year)that to get to the CD drive you'll have to remove only 16 screws. The issues itself is very common with these models. While your in there you might as well upgrade the hard drive as you'll be removing the caddy that houses the HD & the CD-ROM.
Here's the official Apple repair guide from 2000:
http://www.scribd.com/doc/103447/iMac-G3-Disassembly-Guide
Similar Messages
-
Gurus..need help in reading data from virtual infocube
Gurus,
I have to read data from an virtual infocube...I am trying to use FM RSDRI_INFOPROV_READ to read data but it doesn't work..
I am doing exactly what has been done in the demo program RSDRi_INFOPROV_READ_DEMO...
Please help me...its really URGENT...
Thanks
samCheck out this thread....
must be helpful
Re: Read data from 0BWTC_C02 via ABAP -
Hi,
Need some help on read statement.
I need to read the records which starts with some character and need to specify the same in where condition as below.
read table i_itab
into w_itab
with key objnr = w_itab-objnr
stat CS 'E'
Binary search.
Getting error as should not use CS in the read statement. How to read the records which starts with letter 'E' only in this case.
Can anyone help me out in this.
Regards,
RamYou should be able to do a binary search to get the first record and then do indexed reads to get subsequent records.
Something like:
DATA tab_index LIKE sy-tabix.
SORT i_itab BY objnr stat.
IF sy-subrc = 0.
tab_index = sy-tabix.
ENDIF.
WHILE sy-subrc = 0.
IF w_itab-stat CS 'E'.
* process record.
ENDIF.
tab_index = tab_index + 1.
READ TABLE i_itab INDEX tab_index.
IF sy-subrc = 0.
IF i_itab-objnr <> w_itab-objnr.
sy-subrc = 9.
ENDIF.
ENDIF.
ENDWHILE.
Rob
Message was edited by: Rob Burbank -
Adobe Reader XI 11.0.3 Help Adobe Reader XI Help not working!!
Dear All,
I've got the below error when click on : Help>Adobe Reader XI Help
Please suggest the solution how to fix my reader help.
Also followed following link to trouble shoot but no luck!!
http://helpx.adobe.com/acrobat/kb/error-online-help-content-cannot.html
Your help is very much appreciated.
Regards,
NEYIGAPULAHi Pat,
Here is the solution worked but not sure we can implement this or not.
Installed Adobe AIR
Installed Adobe Help Manager
- Downloaded offline PDF
Changed Adobe Reader EXE AcroRd32.exe compatibility settings to Windows XP SP3
Launched Adobe Reader > Prompts "protected mode" windows to disable> Disabled Protected mode>Help working fine now
Would you mind tell me the importance of Protected mode in New version of Adobe reader.
Regards,
Srinivas N -
Need help to read Instant messenger packet
I need help to read the IM packet from the LAN.Can anyone help me? I doing my project to monitor the IM in LAN.If got example,pls show me.
There are several problems with this. First, it is not possible to separate IM packets from any other packets floating around a network. Second, to peek at packets intended for other computers is a pretty big no no.
If you really need to do this, build a proxy server or some layer in the middle of your IM where you can record
I need help to read the IM packet from the LAN.Can
anyone help me? I doing my project to monitor the IM
in LAN.If got example,pls show me. -
I need a help in reading video file of 80MB into ...
Hello,
I need a help in reading video file of 80MB into a vector storing ByteArrays in it.Please help me soon.
Thank YouHello,
I was able to solve my problem by thinking & my code goes as follows.I am trying to read a video file in my program.
public Vector getFileMediaContent(RandomAccessFile fileObj){
Runtime runtime = Runtime.getRuntime();
System.out.println ("Free memory : inside Boolean Type Panel" + runtime.freeMemory() );
dataContent.removeAllElements();
System.out.println("dataContent :"+dataContent.size());
try{
int size=(int)fileObj.length();
if(size<2000000){
byte[] data = new byte[size];
fileObj.read(data);
dataContent.addElement(data);
data=null;
System.gc();
else{
int fixedsize=2000000;
int startindex=0;
int read=0;
int remaining=0;
while(read!=-1){
byte[] data=new byte[fixedsize];
read=fileObj.read(data,0,data.length);
dataContent.addElement(data);
startindex=startindex+data.length;
remaining=size-startindex;
fileObj.seek(startindex);
data=null;
System.gc();
if(remaining>0 && remaining<2000000){
byte[] data1=new byte[remaining];
read=fileObj.read(data1,0,data1.length);
dataContent.addElement(data1);
data1=null;
System.gc();
System.out.println("outside while");
System.out.println("dataContent 1 :"+dataContent.size());
System.out.println ("Free memory : inside Boolean Type Panel" + runtime.freeMemory() );
fileObj = null;
System.gc();
}catch(Exception e){
e.printStackTrace();
return dataContent;
Now I am not facing the problem of IndexOut of Bounds Exception But I am getting Out of Memory Error.
Can You suggest me to come out of this,.
As I know I have two solutions.
1.Make the objects Null which is using more space & call System.gc();
2.Increase the Virtual Memory of my System.
Any solutions other than this?
And How to Increase the Virtual Memory?Please do reply.
ThankYou -
Can someone help me read my crash report?
Hello,
I have been having problems with my macbook pro. I am running a 2.66 GHz Core i7 with 8gb on OSX 10.7.4. I have been having numerous problems with kernel panics and the screen shutting itself off, mainly while editing a lot of video in FCPX. I have taken this in to best buy where I have the black tie protection and they did not not fix this, even when it was sent back to apple. I thought i may have figured some problems with my card reader not being compatible, but as I was editing some more, my screen just went blank. I have reset PRAM and all of that stuff many times, as well as run disk repair under the disk utiility programs. I have exhausted the basics of restarting, as well as clean installing my entire computer. Here is the crash report if anyone is able to help and see if there is a problem somewhere. Thanks for your time
Interval Since Last Panic Report: 190093 sec
Panics Since Last Report: 1
Anonymous UUID: 845B1016-F413-46A7-AD94-8263D4F0F7B4
Mon Jul 16 18:02:30 2012
panic(cpu 3 caller 0xffffff7f80918947): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff81138ef000 0x0a5480a2, D0, P3/4
Backtrace (CPU 3), Frame : Return Address
0xffffff80f021b2b0 : 0xffffff8000220792
0xffffff80f021b330 : 0xffffff7f80918947
0xffffff80f021b3c0 : 0xffffff7f80a08aa4
0xffffff80f021b410 : 0xffffff7f80a08b64
0xffffff80f021b470 : 0xffffff7f80cb5749
0xffffff80f021b5b0 : 0xffffff7f80a27bed
0xffffff80f021b5e0 : 0xffffff7f809222c2
0xffffff80f021b690 : 0xffffff7f8091dbc4
0xffffff80f021b880 : 0xffffff7f8091f7c9
0xffffff80f021b960 : 0xffffff7f817c4130
0xffffff80f021b9a0 : 0xffffff7f817d3790
0xffffff80f021b9c0 : 0xffffff7f817ef3f4
0xffffff80f021ba00 : 0xffffff7f817ef459
0xffffff80f021ba40 : 0xffffff7f817d7605
0xffffff80f021ba90 : 0xffffff7f8178df6f
0xffffff80f021bb10 : 0xffffff7f8178c9e0
0xffffff80f021bb40 : 0xffffff7f81792435
0xffffff80f021bb70 : 0xffffff800065553d
0xffffff80f021bbe0 : 0xffffff80006558dc
0xffffff80f021bc40 : 0xffffff800065609b
0xffffff80f021bd80 : 0xffffff80002a3f08
0xffffff80f021be80 : 0xffffff8000223096
0xffffff80f021beb0 : 0xffffff80002148a9
0xffffff80f021bf10 : 0xffffff800021bbd8
0xffffff80f021bf70 : 0xffffff80002aef20
0xffffff80f021bfb0 : 0xffffff80002daa33
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000->0xffffff7f80b91fff
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80843000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f808a6000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f8086e000
com.apple.nvidia.nv50hal(7.1.8)[7596DB8C-AE9D-3C87-B11A-0ED8F940CAF8]@0xffffff7 f80b92000->0xffffff7f80eb3fff
dependency: com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000
com.apple.GeForce(7.1.8)[00925AF3-22EE-3858-8BD3-06AE57DFCC86]@0xffffff7f817750 00->0xffffff7f81834fff
dependency: com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f808a6000
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80843000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f8086e000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 62147612862732
last loaded kext at 61411110870456: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f80f5f000, size 57344)
last unloaded kext at 60630943246453: com.apple.driver.AppleUSBCDC 4.1.17 (addr 0xffffff7f807cc000, size 12288)
loaded kexts:
com.apple.filesystems.msdosfs 1.7.1
com.apple.driver.Oxford_Semi 3.0.1
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleIntelHDGraphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleIntelHDGraphicsFB 7.1.8
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.GeForce 7.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleMuxControl 3.0.16
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.1.8
com.apple.NVDAResman 7.1.8
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4He is running 10.7.5
I would suggest making sure you have run all software updates, including the 10.7.5 supplemental -
Need help repairing Driver - pic included.
Hey guys, i have been trying to get boot camp to work on my macbook for ages. First i got it to work, but then when i used windows, it wouldn't recognize my wireless in my macbook. Anyways, to make a long story short, i used the boot camp assistant tonight to delete the windows partition, then i was trying to re-install windows XP.
As most of you know, the first step is to partition the disks, when i told it how much to partition of each it came up with a driver error saying i needed to repair the disks.
so, i went to disk utility to try and verify the disk, its did, but then it came up with this:
http://i50.photobucket.com/albums/f344/kawirider04/Untitled-1-1.jpg
any help would be great guys, i eventually want to run windows xp on my blackbook so i can play World of Warcraft with a higher framerate. Anyways, thanks in advance!
BTW - after i 'verify disk' i can't click on 'repair disk'
Black Macbook 1gb Ram Mac OS X (10.4.8)Boot up from your Install DVD and then launch Disc Utility to verify/repair the disc and permissions as well.
-
Since hard drive restore, backup gives Disk Repair, Read-only errors
Hi all -
After a hard drive crash last week, I restored the new HD using my historically reliable wireless Time Capsule (TC) with Time Machine (TM). But ever since, backups have ceased to work. Now, TM spins for about an hour before returning the following errors in sequence:
(1) DISK REPAIR: "The disk 'Backup of [my name] Macbook' was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible."
(2) TIME MACHINE ERROR: The backup volume is read only. To select a different volume, open System Preferences and choose Time Machine."
I very much doubt there is an actual problem with the TC disk itself; my wife's iBook G4 continues to backup to it without any problem whatsoever. Related threads have suggested:
a) doing clever things with Preferences, such as deleting the com.apple.TimeMachine.plist file and re-booting. However, for some reason (perhaps related to the source of the problem?) I have no such file...
b) using Disk Utility to re-format and/or re-partition (these terms mean little to me) the TC disk. But my Disk Utility doesn't see the TC. (Perhaps related, I no longer actually see the little backup disk icon on the desktop.) And as I've said, I doubt very much it's the TC disk itself that it is the problem.
I have of course tried re-booting everything, as well as un-mounting and re-mounting the TC: Computer, heal thyself! No luck.
Any guidance is appreciated...
(PS If there's a log file I should post that might help with diagnostics, just let me know where to find it.)I have suffered the same error messages, but without a hard disk crash before it.
I copied the backup-file from the TC to a separate drive, erased the TC, re-installed it, copied the backup-file to the TC en re-initiated TM only to be welcomed with the 'The backup volume is read only'-message again.
Beats me why this happened. Most frustrating part, however, is that I am not able to restore from the backup-file. Any suggestions are highly appreciated! -
Help w/reading from external NTFS hard drive
Just bought my MacBook yesterday, and hooked up my ext. hard drive (NTFS) via USB. This HDD had been a backup & extra storage for my XP desktop. I was hoping I could have read access to the drive in order to copy music & pics to the Mac.
When I power up the drive & connect the USB cable I get the following message: "The disk you inserted was not readable by this computer", and three options: Initialize, Ignore, and Eject. Under initialize I've tried both Verify Disk & Repair Disk, but no joy. Any ideas?
Thanks for helping a new Switcher!Thanx warbirdx, that did the trick!
-
Need help repair permissions!!!!
I'm trying to download to the desktop and there is 257GB of space available, but it won't let me . It will allow me to download to a folder in my documents. The finder keeps asking for my password when trying to trash items, I type it and then get a message that I don't have permission. I have tried the disk permissions repair, but it doesn't help. I am the administrator of the computer, but I made sure that on my account is was still the administrator. I've read some of the forums pertaining to using terminal to trash, but I am not familiar with that so I didn't want to mess it up any worse. It just seems to effect everything on my desktop. I can download into folders and trash documents that are in folder, just can't download or trash anything on my desktop. It's strange. I have never worked with PC only macs and have never had any trouble until now.
Gosh that was easy! I have read all the dicussions and thought I was going to have to really do alot of stuff. That was the only thing I didn't think to try. Thanks, it fixed it. Thanks for the quick response.
-
Time Machine just stopped working, Disk Repair & Read Only errors
So my TM backups have been running fine for at least six months now.
Today I started to get this error:
"Disk Repair
The disk "xxxxxx" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible."
followed by
"Time Machine Error
The backup volume is read only.
To select a different volume, open System Preferences and choose Time Machine"
I've searched high and low for a solution to no avail.
Here's what I've tried so far.
Attached disk to iMac, repaired the disk. It now verifies with no errors.
Changed permissions on the disk to 644 through terminal as per an Apple article.
Rebooted iMac several times, zapped PRAM.
Anyone have any ideas as to why this is suddenly happening? I would really hate to have to reformat the disk and start from scratch. This is very frustrating, I've changed nothing.
Here's the log from Time Machine Buddy:
Starting standard backup
Disk image /Volumes/FreeAgent Drive/Thomas Torrillo’s iMac_002332917af9.sparsebundle mounted at: /Volumes/Backup of Thomas Torrillo’s iMac
Backing up to: /Volumes/Backup of Thomas Torrillo’s iMac/Backups.backupdb
The target volume is read-only.
Backup failed with error: The target volume is read-only.
Ejected Time Machine disk image.
Message was edited by: Tom Torrillo (added log info)See if this helps:
What to do if Time Machine reports you don't have permission
This was posted in the Apple Discussions by V.K. I have only modified it slightly to be more generic.
The problem seems to be that 10.5.6 changes permissions on a file so that even the root user doesn't have write peivileges. I have no idea why they did this. The workaround suggested in [an]other post will probably work, too, but i did something less drastic. Instead of deleting the file I changed permissions on it, and it worked just fine. An added benefit is that the permission change seems to stick, so you don't have to delete the file every time you change a drive.
[Open the Terminal application in your Utilities folder. At the prompt [enter] the following command:
sudo chmod 644 /volumes/"TM drive name"/.xxxxxxxxxxxx
The name of the file .xxxxxxxxxxxx is based on the MAC address of your computer and will be different for every computer. Put the name of the TM drive in the above and keep the quotes.
You'll have to enter your admin password (which you won't see) which is normal.
This was edited by Kappy just for cleanup.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate. -
Need help repairing bootable external drive permissions
I, like some of the other posters I have read, have messed up the permissions on a bootable external drive.
I don't have direct access to my home computer right now so I set up an external bootable copy of my personal account, so I can basically run a copy of my own personal computer from anyone elses mac. And when I get back home I will be able to copy back across any new files.
The set up was working great till I realized that my external drive was completely readable, and writeable by anyone who turned it on as a peripheral disk while logged in on the main computer if the computer was booted up on it's own startup disk.
If my external was set as the startup disk, then my password and account kept everything secure.
So anyway, not really knowing what I was doing I, using the show info command, changed the group permission for the whole disk/volume from admin to my username. Now unfortunately I cannot startup using my external disk; the whole system goes straight to Kernal. And all my files are still totally assesible to any one logged in on the computer using its own start up disk.
Can you help me with the commands, to first repair the group permission so my disk is bootable again, then second so that I can prevent anyone with out my password access to any files on the disk?
Thanks alot!Can you help me with the commands, to first repair the group permission so my disk is bootable again, then second so that I can prevent anyone with out my password access to any files on the disk?
On another machine, open the Disk Utility in the /Applications/Utilities/ folder, select your drive in the list of disks, and then click on the Repair Permissions button; other solutions are available if this doesn't work.
Your two goals are mutually exclusive; there is no way to restrict access to an entire disk to yourself while maintaining the ability of that disk to boot Mac OS X. Your home folder can be protected in this way by changing the permissions on the item inside /Users/ with the house icon, or by turning on FileVault in the Security pane of System Preferences.
(11310) -
Need help, please read.
For a birthday present, I received an iPhone 3G.
Recently, I've noticed that sometimes my iPhone's usual sounds do not work as they should.
To be more specific, my iPhone does NOT ring sometimes. It DOES however, show that the person is calling successively. But, the iPhone only vibrates, and sometimes it will ring.
Also, when I lock/unlock my phone, the clicking sound does not happen, even though "ring" is on. But, other times it will work and the sound will play. Sometimes when I text the letters will not make any sounds, again, even though I have my iPhone set to ring.
Is there anyone that has/had the same problem I am having ?
If so, help me out here on what I should do ..
I'm thinking of bringing my phone to a AT&T store and have them take a look at it, maybe I'll get a new one for free .. ?
Please help.
Thank youStandard troubleshooting steps in order are power your iPhone off and on, an iPhone reset - which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, restoring your iPhone with iTunes from your iPhone's backup, and restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
AT&T does not handle iPhone repairs or exchanges under Apple's warranty.
If no change after the troubleshooting steps provided in order, you can call AppleCare, or make an appointment at an Apple store if there is one nearby. -
Help to read TKPROF file in correct way
Hi,
I need help to understand what is going wrong.
I have one query executed with different bind variables values.
Case 1: Execution time is about 7.5 hours when :v6=:v3=:v4 (these are date bind variables values)
Case 2: Execution time is about 2 minuteswhen :v6 differs from :v3 and :v4, but :v3=:v4 (these are date bind variables values)
You can see TKPROF files below
Case1
SELECT EK.SECIK AS EK_SECIK,S.SECIK AS S_SECIK,EK.EQKEY1 AS EK_EQKEY1,EK.FROMDATE AS EK_FROMDATE,S.SECSHORT AS S_SECSHORT,S.SECNAME AS S_SECNAME,C.CDY AS C_CDY,C.CSTD AS C_CSTD,P.PAR AS P_PAR,P.PARIK AS P_PARIK,PH.ACCOUNTING_FRAMEWORK AS PH_ACC_FW,NVL(PH.BAL_NOMINAL_NUMBER,0) AS PH_BAL_NOM_NUM,PH.FROM_DATE AS PH_FROM_DATE,PH.POR AS PH_POR,PH.SEC_SHORT_NAME AS PH_SEC_SHORT_NAME,PH.TO_DATE AS PH_TO_DATE,PH.CUSTODY_SHORT_NAME AS PH_CUST_SHORT_NAME,T.TC_CSTD AS T_CSTD,SUM(T.TH_BAL_NOM_NUM) AS T_BAL_NOM_NUM,T.TH_SEC_SHORT_NAME AS T_SEC_SHORT_NAME,PH.POR_REF AS PH_POR_REF,PORT.PORIK AS PORT_PORIK,PORT.PORGRPIK AS PORT_PORGRPIK,PG.PORGRPIK AS PG_PORGRPIK,PG.PORGRPTYPEIK AS PG_PORGRPTYPEIK,PGT.PORGRPTYPEIK AS PGT_PORGRPTYPEIK FROM SCDAT.CUSTODIES C,SCDAT.EQUITYKEYS EK,SCDAT.PARTNERS P,SCDAT.PORTGROUPS PG,SCDAT.PORTGROUPTYPES PGT,(
SELECT HOLKEYS.PORIK As POR_REF,
ACCDEF.ACC As ACCOUNTING_FRAMEWORK,
NVL(HOLDINGS.BALNOMVAL,0) As BAL_NOMINAL_NUMBER,
CUSTODIES.CDY As CUSTODY_SHORT_NAME,
DECODE(HOLDINGS.FINBOOKED,0,'No',1,'Yes',' ') As FINALLY_BOOKED,
HOLDINGS.FROMDATE As FROM_DATE,
PORTFOLIOS.POR As POR,
SECURITIES.SECSHORT As SEC_SHORT_NAME,
HOLDINGS.TODATE As TO_DATE,
HOLDINGS.FINBOOKED As X_FINALLY_BOOKED
FROM HOLDINGS,HOLKEYS,ACCDEF,CUSTODIES,PORTFOLIOS,SECURITIES WHERE HOLDINGS.HOLKEYIK = HOLKEYS.HOLKEYIK AND HOLDINGS.ACCIK = ACCDEF.ACCIK AND HOLKEYS.CDYIK = CUSTODIES.CDYIK AND HOLKEYS.PORIK = PORTFOLIOS.PORIK AND HOLKEYS.SECIK = SECURITIES.SECIK) PH,SCDAT.PORTFOLIOS PORT,SCDAT.SECURITIES S,(SELECT TC.CDY AS TC_CDY,TC.CSTD AS TC_CSTD,SUM(NVL(TH.BAL_NOMINAL_NUMBER,0)) AS TH_BAL_NOM_NUM,TH.FROM_DATE AS TH_FROM_DATE,TH.TO_DATE AS TH_TO_DATE,TH.SEC_SHORT_NAME AS TH_SEC_SHORT_NAME,TH.CUSTODY_SHORT_NAME AS TH_CUST_SHORT_NAME,TP.PAR AS TP_PAR,TP.PARIK AS TP_PARIK FROM SCDAT.CUSTODIES TC,(
SELECT ACCDEF.ACC As ACCOUNTING_FRAMEWORK,
NVL(HOLDINGS.BALNOMVAL,0) As BAL_NOMINAL_NUMBER,
CUSTODIES.CDY As CUSTODY_SHORT_NAME,
DECODE(HOLDINGS.FINBOOKED,0,'No',1,'Yes',' ') As FINALLY_BOOKED,
HOLDINGS.FROMDATE As FROM_DATE,
SECURITIES.SECSHORT As SEC_SHORT_NAME,
HOLDINGS.TODATE As TO_DATE,
HOLDINGS.FINBOOKED As X_FINALLY_BOOKED
FROM HOLDINGS,HOLKEYS,ACCDEF,CUSTODIES,SECURITIES WHERE HOLDINGS.ACCIK = ACCDEF.ACCIK AND HOLDINGS.HOLKEYIK = HOLKEYS.HOLKEYIK AND HOLKEYS.CDYIK = CUSTODIES.CDYIK AND HOLKEYS.SECIK = SECURITIES.SECIK) TH,SCDAT.PARTNERS TP WHERE TH.CUSTODY_SHORT_NAME = TC.CDY AND TC.CSTD = TP.PARIK AND TH.ACCOUNTING_FRAMEWORK = :v1 AND NOT (NVL(TH.BAL_NOMINAL_NUMBER,0) = :v2 ) AND TH.FROM_DATE <= :v3 AND TH.TO_DATE >= :v4 AND TH.FINALLY_BOOKED = :v5 GROUP BY TC.CDY,TC.CSTD,TH.FROM_DATE,TH.TO_DATE,TH.SEC_SHORT_NAME,TH.CUSTODY_SHORT_NAME,TP.PAR,TP.PARIK) T WHERE EK.SECIK = S.SECIK AND PORT.PORGRPIK = PG.PORGRPIK AND PG.PORGRPTYPEIK = PGT.PORGRPTYPEIK AND S.SECSHORT = PH.SEC_SHORT_NAME AND PH.SEC_SHORT_NAME = T.TH_SEC_SHORT_NAME AND PH.POR_REF = PORT.PORIK AND PH.CUSTODY_SHORT_NAME = C.CDY AND EK.FROMDATE = :v6 AND NOT (EK.EQKEY1 = :v7 ) AND P.PAR = :v8 AND NOT (PGT.PORGRPTYPE IN (:v9 ,:v10 )) AND PH.ACCOUNTING_FRAMEWORK = :v11 AND NOT (NVL(PH.BAL_NOMINAL_NUMBER,0) = :v12 ) AND PH.FINALLY_BOOKED = :v13 AND EK.FROMDATE >= PH.FROM_DATE AND EK.FROMDATE <= PH.TO_DATE AND C.CSTD = P.PARIK AND C.CSTD = T.TC_CSTD GROUP BY EK.SECIK,S.SECIK,EK.EQKEY1,EK.FROMDATE,S.SECSHORT,S.SECNAME,C.CDY,C.CSTD,P.PAR,P.PARIK,PH.ACCOUNTING_FRAMEWORK,NVL(PH.BAL_NOMINAL_NUMBER,0),PH.FROM_DATE,PH.POR,PH.SEC_SHORT_NAME,PH.TO_DATE,PH.CUSTODY_SHORT_NAME,T.TC_CSTD,T.TH_SEC_SHORT_NAME,PH.POR_REF,PORT.PORIK,PORT.PORGRPIK,PG.PORGRPIK,PG.PORGRPTYPEIK,PGT.PORGRPTYPEIK
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 2.31 2.31 0 0 0 0
Fetch 1 27398.48 27473.33 11124 250891597 0 0
total 3 27400.79 27475.65 11124 250891597 0 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 171 (SCDAT)
Number of plan statistics captured: 1
Rows (1st) Rows (avg) Rows (max) Row Source Operation
0 0 0 HASH GROUP BY (cr=0 pr=0 pw=0 time=55 us cost=1976 size=251 card=1)
123 123 123 NESTED LOOPS (cr=250890161 pr=11086 pw=0 time=35602462 us)
38622 38622 38622 NESTED LOOPS (cr=250858945 pr=8664 pw=0 time=4221237335 us cost=1975 size=251 card=1)
3945 3945 3945 NESTED LOOPS (cr=250850948 pr=7835 pw=0 time=1967017649 us cost=1937 size=199 card=1)
3833 3833 3833 HASH JOIN (cr=42840 pr=6196 pw=0 time=4910380 us cost=1559 size=1956 card=12)
8667 8667 8667 NESTED LOOPS (cr=42834 pr=6192 pw=0 time=4254867 us)
8667 8667 8667 NESTED LOOPS (cr=34167 pr=6192 pw=0 time=4232686 us cost=1556 size=2156 card=14)
8667 8667 8667 NESTED LOOPS (cr=26520 pr=6192 pw=0 time=4206426 us cost=1542 size=2058 card=14)
8667 8667 8667 NESTED LOOPS (cr=16041 pr=6192 pw=0 time=4161555 us cost=1528 size=1806 card=14)
18060 18060 18060 NESTED LOOPS (cr=16037 pr=6191 pw=0 time=4575478 us cost=1527 size=36504 card=312)
177 177 177 NESTED LOOPS (cr=6846 pr=6091 pw=0 time=3909468 us cost=1350 size=1500 card=15)
177 177 177 NESTED LOOPS (cr=6490 pr=6091 pw=0 time=3907157 us cost=1320 size=1245 card=15)
177 177 177 NESTED LOOPS (cr=6133 pr=6091 pw=0 time=3905733 us cost=1305 size=585 card=15)
1 1 1 NESTED LOOPS (cr=5 pr=2 pw=0 time=17096 us cost=2 size=23 card=1)
1 1 1 TABLE ACCESS BY INDEX ROWID ACCDEF (cr=2 pr=2 pw=0 time=17079 us cost=1 size=12 card=1)
1 1 1 INDEX UNIQUE SCAN ACCDEF_IX1 (cr=1 pr=1 pw=0 time=6675 us cost=0 size=0 card=1)(object id 103661)
1 1 1 TABLE ACCESS BY INDEX ROWID PARTNERS (cr=3 pr=0 pw=0 time=14 us cost=1 size=11 card=1)
1 1 1 INDEX UNIQUE SCAN PARTNERS_IX1 (cr=2 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 91563)
177 177 177 TABLE ACCESS FULL EQUITYKEYS (cr=6128 pr=6089 pw=0 time=3888376 us cost=1303 size=240 card=15)
177 177 177 TABLE ACCESS BY INDEX ROWID SECURITIES (cr=357 pr=0 pw=0 time=1127 us cost=1 size=44 card=1)
177 177 177 INDEX UNIQUE SCAN P_SECURITIES (cr=180 pr=0 pw=0 time=563 us cost=0 size=0 card=1)(object id 93819)
177 177 177 TABLE ACCESS BY INDEX ROWID SECURITIES (cr=356 pr=0 pw=0 time=2027 us cost=2 size=17 card=1)
177 177 177 INDEX RANGE SCAN SECURITIES_IX2 (cr=180 pr=0 pw=0 time=1166 us cost=1 size=0 card=1)(object id 93809)
18060 18060 18060 TABLE ACCESS BY INDEX ROWID HOLKEYS (cr=9191 pr=100 pw=0 time=716100 us cost=13 size=340 card=20)
18060 18060 18060 INDEX RANGE SCAN I_HOLKEYS_SECPOR (cr=421 pr=100 pw=0 time=689634 us cost=2 size=0 card=23)(object id 98864)
8667 8667 8667 TABLE ACCESS BY INDEX ROWID CUSTODIES (cr=4 pr=1 pw=0 time=131716 us cost=1 size=12 card=1)
36120 36120 36120 INDEX RANGE SCAN R_CUSTODIES_CSTD (cr=3 pr=1 pw=0 time=53659 us cost=0 size=0 card=3)(object id 101437)
8667 8667 8667 TABLE ACCESS BY INDEX ROWID PORTFOLIOS (cr=10479 pr=0 pw=0 time=36782 us cost=1 size=18 card=1)
8667 8667 8667 INDEX UNIQUE SCAN P_PORTFOLIOS (cr=1812 pr=0 pw=0 time=14722 us cost=0 size=0 card=1)(object id 91399)
8667 8667 8667 INDEX UNIQUE SCAN P_PORTGROUPS (cr=7647 pr=0 pw=0 time=20935 us cost=0 size=0 card=1)(object id 95885)
8667 8667 8667 TABLE ACCESS BY INDEX ROWID PORTGROUPS (cr=8667 pr=0 pw=0 time=15075 us cost=1 size=7 card=1)
3 3 3 VIEW index$_join$_005 (cr=6 pr=4 pw=0 time=17822 us cost=3 size=45 card=5)
3 3 3 HASH JOIN (cr=6 pr=4 pw=0 time=17816 us)
5 5 5 INDEX FAST FULL SCAN PORTGROUPTYPES_IX1 (cr=3 pr=2 pw=0 time=10731 us cost=1 size=45 card=5)(object id 95857)
3 3 3 INDEX FAST FULL SCAN P_PORTGROUPTYPES (cr=3 pr=2 pw=0 time=6182 us cost=1 size=45 card=5)(object id 95858)
3945 3945 3945 VIEW PUSHED PREDICATE (cr=250808108 pr=1639 pw=0 time=1615801762 us cost=32 size=36 card=1)
3945 3945 3945 SORT GROUP BY (cr=250808108 pr=1639 pw=0 time=1615792437 us cost=32 size=86 card=1)
8052 8052 8052 NESTED LOOPS (cr=250808108 pr=1639 pw=0 time=3245096176 us cost=31 size=86 card=1)
6879822 6879822 6879822 NESTED LOOPS (cr=14142041 pr=0 pw=0 time=93287445 us cost=18 size=53 card=1)
7665 7665 7665 MERGE JOIN CARTESIAN (cr=3980 pr=0 pw=0 time=214689 us cost=5 size=40 card=1)
7665 7665 7665 NESTED LOOPS (cr=3846 pr=0 pw=0 time=75334 us cost=3 size=23 card=1)
3833 3833 3833 TABLE ACCESS BY INDEX ROWID PARTNERS (cr=3842 pr=0 pw=0 time=38447 us cost=2 size=11 card=1)
3833 3833 3833 INDEX UNIQUE SCAN P_PARTNERS (cr=9 pr=0 pw=0 time=13355 us cost=1 size=0 card=1)(object id 91507)
7665 7665 7665 TABLE ACCESS BY INDEX ROWID CUSTODIES (cr=4 pr=0 pw=0 time=34661 us cost=1 size=12 card=1)
7665 7665 7665 INDEX RANGE SCAN R_CUSTODIES_CSTD (cr=3 pr=0 pw=0 time=23093 us cost=0 size=0 card=1)(object id 101437)
7665 7665 7665 BUFFER SORT (cr=134 pr=0 pw=0 time=128191 us cost=4 size=17 card=1)
7665 7665 7665 TABLE ACCESS BY INDEX ROWID SECURITIES (cr=134 pr=0 pw=0 time=44771 us cost=2 size=17 card=1)
7665 7665 7665 INDEX RANGE SCAN SECURITIES_IX2 (cr=109 pr=0 pw=0 time=32098 us cost=1 size=0 card=1)(object id 93809)
6879822 6879822 6879822 TABLE ACCESS BY INDEX ROWID HOLKEYS (cr=14138061 pr=0 pw=0 time=99798296 us cost=13 size=13 card=1)
27845684 27845684 27845684 INDEX RANGE SCAN I_HOLKEYS_SECPOR (cr=92999 pr=0 pw=0 time=21161648 us cost=2 size=0 card=23)(object id 98864)
8052 8052 8052 VIEW PUSHED PREDICATE VW_GBC_22 (cr=236667503 pr=1677 pw=0 time=1559090990 us cost=13 size=33 card=1)
8052 8052 8052 SORT GROUP BY (cr=236667503 pr=1677 pw=0 time=1552356479 us cost=13 size=64 card=1)
8052 8052 8052 HASH JOIN (cr=236667503 pr=1677 pw=0 time=1518269306 us cost=12 size=64 card=1)
6879822 6879822 6879822 TABLE ACCESS BY INDEX ROWID ACCDEF (cr=13759644 pr=0 pw=0 time=58085525 us cost=1 size=12 card=1)
6879822 6879822 6879822 INDEX UNIQUE SCAN ACCDEF_IX1 (cr=6879822 pr=0 pw=0 time=37383556 us cost=0 size=0 card=1)(object id 103661)
16077 16077 16077 TABLE ACCESS BY INDEX ROWID HOLDINGS (cr=222907859 pr=1677 pw=0 time=1109306657 us cost=10 size=52 card=1)
13212301 13212301 13212301 INDEX SKIP SCAN P_HOLDINGS (cr=211196455 pr=431 pw=0 time=734718877 us cost=6 size=0 card=3)(object id 2173392)
38622 38622 38622 INDEX RANGE SCAN R_HOLDINGS_HOLKEYIK (cr=7997 pr=829 pw=0 time=9653175 us cost=2 size=0 card=42)(object id 2173885)
123 123 123 TABLE ACCESS BY INDEX ROWID HOLDINGS (cr=31216 pr=2422 pw=0 time=40223697 us cost=38 size=52 card=1)
Case2
SELECT EK.SECIK AS EK_SECIK,S.SECIK AS S_SECIK,EK.EQKEY1 AS EK_EQKEY1,EK.FROMDATE AS EK_FROMDATE,S.SECSHORT AS S_SECSHORT,S.SECNAME AS S_SECNAME,C.CDY AS C_CDY,C.CSTD AS C_CSTD,P.PAR AS P_PAR,P.PARIK AS P_PARIK,PH.ACCOUNTING_FRAMEWORK AS PH_ACC_FW,NVL(PH.BAL_NOMINAL_NUMBER,0) AS PH_BAL_NOM_NUM,PH.FROM_DATE AS PH_FROM_DATE,PH.POR AS PH_POR,PH.SEC_SHORT_NAME AS PH_SEC_SHORT_NAME,PH.TO_DATE AS PH_TO_DATE,PH.CUSTODY_SHORT_NAME AS PH_CUST_SHORT_NAME,T.TC_CSTD AS T_CSTD,SUM(T.TH_BAL_NOM_NUM) AS T_BAL_NOM_NUM,T.TH_SEC_SHORT_NAME AS T_SEC_SHORT_NAME,PH.POR_REF AS PH_POR_REF,PORT.PORIK AS PORT_PORIK,PORT.PORGRPIK AS PORT_PORGRPIK,PG.PORGRPIK AS PG_PORGRPIK,PG.PORGRPTYPEIK AS PG_PORGRPTYPEIK,PGT.PORGRPTYPEIK AS PGT_PORGRPTYPEIK FROM SCDAT.CUSTODIES C,SCDAT.EQUITYKEYS EK,SCDAT.PARTNERS P,SCDAT.PORTGROUPS PG,SCDAT.PORTGROUPTYPES PGT,(
SELECT HOLKEYS.PORIK As POR_REF,
ACCDEF.ACC As ACCOUNTING_FRAMEWORK,
NVL(HOLDINGS.BALNOMVAL,0) As BAL_NOMINAL_NUMBER,
CUSTODIES.CDY As CUSTODY_SHORT_NAME,
DECODE(HOLDINGS.FINBOOKED,0,'No',1,'Yes',' ') As FINALLY_BOOKED,
HOLDINGS.FROMDATE As FROM_DATE,
PORTFOLIOS.POR As POR,
SECURITIES.SECSHORT As SEC_SHORT_NAME,
HOLDINGS.TODATE As TO_DATE,
HOLDINGS.FINBOOKED As X_FINALLY_BOOKED
FROM HOLDINGS,HOLKEYS,ACCDEF,CUSTODIES,PORTFOLIOS,SECURITIES WHERE HOLDINGS.HOLKEYIK = HOLKEYS.HOLKEYIK AND HOLDINGS.ACCIK = ACCDEF.ACCIK AND HOLKEYS.CDYIK = CUSTODIES.CDYIK AND HOLKEYS.PORIK = PORTFOLIOS.PORIK AND HOLKEYS.SECIK = SECURITIES.SECIK) PH,SCDAT.PORTFOLIOS PORT,SCDAT.SECURITIES S,(SELECT TC.CDY AS TC_CDY,TC.CSTD AS TC_CSTD,SUM(NVL(TH.BAL_NOMINAL_NUMBER,0)) AS TH_BAL_NOM_NUM,TH.FROM_DATE AS TH_FROM_DATE,TH.TO_DATE AS TH_TO_DATE,TH.SEC_SHORT_NAME AS TH_SEC_SHORT_NAME,TH.CUSTODY_SHORT_NAME AS TH_CUST_SHORT_NAME,TP.PAR AS TP_PAR,TP.PARIK AS TP_PARIK FROM SCDAT.CUSTODIES TC,(
SELECT ACCDEF.ACC As ACCOUNTING_FRAMEWORK,
NVL(HOLDINGS.BALNOMVAL,0) As BAL_NOMINAL_NUMBER,
CUSTODIES.CDY As CUSTODY_SHORT_NAME,
DECODE(HOLDINGS.FINBOOKED,0,'No',1,'Yes',' ') As FINALLY_BOOKED,
HOLDINGS.FROMDATE As FROM_DATE,
SECURITIES.SECSHORT As SEC_SHORT_NAME,
HOLDINGS.TODATE As TO_DATE,
HOLDINGS.FINBOOKED As X_FINALLY_BOOKED
FROM HOLDINGS,HOLKEYS,ACCDEF,CUSTODIES,SECURITIES WHERE HOLDINGS.ACCIK = ACCDEF.ACCIK AND HOLDINGS.HOLKEYIK = HOLKEYS.HOLKEYIK AND HOLKEYS.CDYIK = CUSTODIES.CDYIK AND HOLKEYS.SECIK = SECURITIES.SECIK) TH,SCDAT.PARTNERS TP WHERE TH.CUSTODY_SHORT_NAME = TC.CDY AND TC.CSTD = TP.PARIK AND TH.ACCOUNTING_FRAMEWORK = :v1 AND NOT (NVL(TH.BAL_NOMINAL_NUMBER,0) = :v2 ) AND TH.FROM_DATE <= :v3 AND TH.TO_DATE >= :v4 AND TH.FINALLY_BOOKED = :v5 GROUP BY TC.CDY,TC.CSTD,TH.FROM_DATE,TH.TO_DATE,TH.SEC_SHORT_NAME,TH.CUSTODY_SHORT_NAME,TP.PAR,TP.PARIK) T WHERE EK.SECIK = S.SECIK AND PORT.PORGRPIK = PG.PORGRPIK AND PG.PORGRPTYPEIK = PGT.PORGRPTYPEIK AND S.SECSHORT = PH.SEC_SHORT_NAME AND PH.SEC_SHORT_NAME = T.TH_SEC_SHORT_NAME AND PH.POR_REF = PORT.PORIK AND PH.CUSTODY_SHORT_NAME = C.CDY AND EK.FROMDATE = :v6 AND NOT (EK.EQKEY1 = :v7 ) AND P.PAR = :v8 AND NOT (PGT.PORGRPTYPE IN (:v9 ,:v10 )) AND PH.ACCOUNTING_FRAMEWORK = :v11 AND NOT (NVL(PH.BAL_NOMINAL_NUMBER,0) = :v12 ) AND PH.FINALLY_BOOKED = :v13 AND EK.FROMDATE >= PH.FROM_DATE AND EK.FROMDATE <= PH.TO_DATE AND C.CSTD = P.PARIK AND C.CSTD = T.TC_CSTD GROUP BY EK.SECIK,S.SECIK,EK.EQKEY1,EK.FROMDATE,S.SECSHORT,S.SECNAME,C.CDY,C.CSTD,P.PAR,P.PARIK,PH.ACCOUNTING_FRAMEWORK,NVL(PH.BAL_NOMINAL_NUMBER,0),PH.FROM_DATE,PH.POR,PH.SEC_SHORT_NAME,PH.TO_DATE,PH.CUSTODY_SHORT_NAME,T.TC_CSTD,T.TH_SEC_SHORT_NAME,PH.POR_REF,PORT.PORIK,PORT.PORGRPIK,PG.PORGRPIK,PG.PORGRPTYPEIK,PGT.PORGRPTYPEIK
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 2.34 2.34 0 0 0 0
Fetch 2 39.31 131.53 17885 17489238 0 2039
total 4 41.66 133.88 17885 17489238 0 2039
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 171 (SCDAT)
Number of plan statistics captured: 1
Rows (1st) Rows (avg) Rows (max) Row Source Operation
2039 2039 2039 HASH GROUP BY (cr=17489238 pr=17885 pw=0 time=131529969 us cost=2062 size=251 card=1)
166827 166827 166827 NESTED LOOPS (cr=17489238 pr=17885 pw=0 time=157379020 us cost=2061 size=251 card=1)
2043 2043 2043 NESTED LOOPS (cr=143626 pr=5419 pw=0 time=19393083 us cost=2003 size=215 card=1)
11156 11156 11156 HASH JOIN (cr=53391 pr=2600 pw=0 time=4865614 us cost=1559 size=1956 card=12)
11156 11156 11156 NESTED LOOPS (cr=53385 pr=2600 pw=0 time=4585085 us)
11156 11156 11156 NESTED LOOPS (cr=42229 pr=2600 pw=0 time=4563404 us cost=1555 size=2156 card=14)
11156 11156 11156 NESTED LOOPS (cr=32467 pr=2600 pw=0 time=4543117 us cost=1541 size=2058 card=14)
11156 11156 11156 NESTED LOOPS (cr=19234 pr=2600 pw=0 time=4506220 us cost=1527 size=1806 card=14)
24211 24211 24211 NESTED LOOPS (cr=19230 pr=2600 pw=0 time=4417211 us cost=1526 size=36504 card=312)
193 193 193 NESTED LOOPS (cr=6926 pr=2556 pw=0 time=4371848 us cost=1350 size=1500 card=15)
193 193 193 NESTED LOOPS (cr=6537 pr=2556 pw=0 time=4370289 us cost=1320 size=1245 card=15)
193 193 193 NESTED LOOPS (cr=6148 pr=2556 pw=0 time=4369122 us cost=1305 size=585 card=15)
1 1 1 NESTED LOOPS (cr=5 pr=1 pw=0 time=6568 us cost=2 size=23 card=1)
1 1 1 TABLE ACCESS BY INDEX ROWID ACCDEF (cr=2 pr=1 pw=0 time=6556 us cost=1 size=12 card=1)
1 1 1 INDEX UNIQUE SCAN ACCDEF_IX1 (cr=1 pr=1 pw=0 time=6551 us cost=0 size=0 card=1)(object id 103661)
1 1 1 TABLE ACCESS BY INDEX ROWID PARTNERS (cr=3 pr=0 pw=0 time=10 us cost=1 size=11 card=1)
1 1 1 INDEX UNIQUE SCAN PARTNERS_IX1 (cr=2 pr=0 pw=0 time=6 us cost=0 size=0 card=1)(object id 91563)
193 193 193 TABLE ACCESS FULL EQUITYKEYS (cr=6143 pr=2555 pw=0 time=4362460 us cost=1303 size=240 card=15)
193 193 193 TABLE ACCESS BY INDEX ROWID SECURITIES (cr=389 pr=0 pw=0 time=1000 us cost=1 size=44 card=1)
193 193 193 INDEX UNIQUE SCAN P_SECURITIES (cr=196 pr=0 pw=0 time=498 us cost=0 size=0 card=1)(object id 93819)
193 193 193 TABLE ACCESS BY INDEX ROWID SECURITIES (cr=389 pr=0 pw=0 time=1486 us cost=2 size=17 card=1)
193 193 193 INDEX RANGE SCAN SECURITIES_IX2 (cr=197 pr=0 pw=0 time=899 us cost=1 size=0 card=1)(object id 93809)
24211 24211 24211 TABLE ACCESS BY INDEX ROWID HOLKEYS (cr=12304 pr=44 pw=0 time=38145 us cost=13 size=340 card=20)
24211 24211 24211 INDEX RANGE SCAN I_HOLKEYS_SECPOR (cr=475 pr=44 pw=0 time=13253 us cost=2 size=0 card=23)(object id 98864)
11156 11156 11156 TABLE ACCESS BY INDEX ROWID CUSTODIES (cr=4 pr=0 pw=0 time=93056 us cost=1 size=12 card=1)
48422 48422 48422 INDEX RANGE SCAN R_CUSTODIES_CSTD (cr=3 pr=0 pw=0 time=35831 us cost=0 size=0 card=3)(object id 101437)
11156 11156 11156 TABLE ACCESS BY INDEX ROWID PORTFOLIOS (cr=13233 pr=0 pw=0 time=31391 us cost=1 size=18 card=1)
11156 11156 11156 INDEX UNIQUE SCAN P_PORTFOLIOS (cr=2077 pr=0 pw=0 time=12494 us cost=0 size=0 card=1)(object id 91399)
11156 11156 11156 INDEX UNIQUE SCAN P_PORTGROUPS (cr=9762 pr=0 pw=0 time=15817 us cost=0 size=0 card=1)(object id 95885)
11156 11156 11156 TABLE ACCESS BY INDEX ROWID PORTGROUPS (cr=11156 pr=0 pw=0 time=15160 us cost=1 size=7 card=1)
5 5 5 VIEW index$_join$_005 (cr=6 pr=0 pw=0 time=656 us cost=3 size=45 card=5)
5 5 5 HASH JOIN (cr=6 pr=0 pw=0 time=648 us)
5 5 5 INDEX FAST FULL SCAN PORTGROUPTYPES_IX1 (cr=3 pr=0 pw=0 time=26 us cost=1 size=45 card=5)(object id 95857)
7 7 7 INDEX FAST FULL SCAN P_PORTGROUPTYPES (cr=3 pr=0 pw=0 time=15 us cost=1 size=45 card=5)(object id 95858)
2043 2043 2043 TABLE ACCESS BY INDEX ROWID HOLDINGS (cr=90235 pr=2819 pw=0 time=19041512 us cost=38 size=52 card=1)
92362 92362 92362 INDEX RANGE SCAN R_HOLDINGS_HOLKEYIK (cr=22368 pr=436 pw=0 time=2663719 us cost=2 size=0 card=42)(object id 2173885)
166827 166827 166827 VIEW PUSHED PREDICATE (cr=17345612 pr=12466 pw=0 time=107441684 us cost=58 size=36 card=1)
166827 166827 166827 SORT GROUP BY (cr=17345612 pr=12466 pw=0 time=107408172 us cost=58 size=117 card=1)
1911217 1911217 1911217 NESTED LOOPS (cr=17345612 pr=12466 pw=0 time=1296620056 us)
10575944 10575944 10575944 NESTED LOOPS (cr=9800492 pr=1140 pw=0 time=22104782 us cost=57 size=117 card=1)
2292837 2292837 2292837 NESTED LOOPS (cr=5195338 pr=0 pw=0 time=9516177 us cost=19 size=65 card=1)
4086 4086 4086 MERGE JOIN CARTESIAN (cr=4885 pr=0 pw=0 time=93451 us cost=6 size=52 card=1)
4086 4086 4086 NESTED LOOPS (cr=4103 pr=0 pw=0 time=29074 us cost=4 size=35 card=1)
2043 2043 2043 NESTED LOOPS (cr=4099 pr=0 pw=0 time=20146 us cost=3 size=23 card=1)
2043 2043 2043 TABLE ACCESS BY INDEX ROWID PARTNERS (cr=2052 pr=0 pw=0 time=10371 us cost=2 size=11 card=1)
2043 2043 2043 INDEX UNIQUE SCAN P_PARTNERS (cr=9 pr=0 pw=0 time=4583 us cost=1 size=0 card=1)(object id 91507)
2043 2043 2043 TABLE ACCESS BY INDEX ROWID ACCDEF (cr=2047 pr=0 pw=0 time=7133 us cost=1 size=12 card=1)
2043 2043 2043 INDEX UNIQUE SCAN ACCDEF_IX1 (cr=4 pr=0 pw=0 time=3680 us cost=0 size=0 card=1)(object id 103661)
4086 4086 4086 TABLE ACCESS BY INDEX ROWID CUSTODIES (cr=4 pr=0 pw=0 time=10204 us cost=1 size=12 card=1)
4086 4086 4086 INDEX RANGE SCAN R_CUSTODIES_CSTD (cr=3 pr=0 pw=0 time=6320 us cost=0 size=0 card=1)(object id 101437)
4086 4086 4086 BUFFER SORT (cr=782 pr=0 pw=0 time=60735 us cost=5 size=17 card=1)
4086 4086 4086 TABLE ACCESS BY INDEX ROWID SECURITIES (cr=782 pr=0 pw=0 time=27892 us cost=2 size=17 card=1)
4086 4086 4086 INDEX RANGE SCAN SECURITIES_IX2 (cr=590 pr=0 pw=0 time=13746 us cost=1 size=0 card=1)(object id 93809)
2292837 2292837 2292837 TABLE ACCESS BY INDEX ROWID HOLKEYS (cr=5190453 pr=0 pw=0 time=12329304 us cost=13 size=13 card=1)
10116948 10116948 10116948 INDEX RANGE SCAN I_HOLKEYS_SECPOR (cr=41387 pr=0 pw=0 time=2136775 us cost=2 size=0 card=23)(object id 98864)
10575944 10575944 10575944 INDEX RANGE SCAN R_HOLDINGS_HOLKEYIK (cr=4605154 pr=1140 pw=0 time=14152971 us cost=2 size=0 card=42)(object id 2173885)
1911217 1911217 1911217 TABLE ACCESS BY INDEX ROWID HOLDINGS (cr=7545120 pr=11326 pw=0 time=78999228 us cost=38 size=52 card=1)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
2039 HASH (GROUP BY)
166827 NESTED LOOPS
2043 NESTED LOOPS
11156 HASH JOIN
11156 VIEW OF 'index$_join$_005' (VIEW)
11156 HASH JOIN
11156 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'PORTGROUPTYPES_IX1' (INDEX (UNIQUE))
11156 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'P_PORTGROUPTYPES' (INDEX (UNIQUE))
24211 HASH JOIN
193 VIEW OF 'index$_join$_004' (VIEW)
193 HASH JOIN
193 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'P_PORTGROUPS' (INDEX (UNIQUE))
1 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'R_PORTGROUPS_PORGRPTYPEIK' (INDEX)
1 HASH JOIN
1 HASH JOIN
1 TABLE ACCESS MODE: ANALYZED (FULL) OF
'EQUITYKEYS' (TABLE)
1 HASH JOIN
193 TABLE ACCESS MODE: ANALYZED (FULL) OF
'SECURITIES' (TABLE)
193 HASH JOIN
193 VIEW OF 'index$_join$_012' (VIEW)
193 HASH JOIN
193 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'P_SECURITIES' (INDEX (UNIQUE))
24211 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'SECURITIES_IX2' (INDEX (UNIQUE))
24211 NESTED LOOPS
11156 NESTED LOOPS
48422 NESTED LOOPS
11156 NESTED LOOPS
11156 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'ACCDEF' (TABLE)
11156 INDEX MODE: ANALYZED (UNIQUE SCAN)
OF 'ACCDEF_IX1' (INDEX (UNIQUE))
11156 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'PARTNERS' (TABLE)
5 INDEX MODE: ANALYZED (UNIQUE SCAN)
OF 'PARTNERS_IX1' (INDEX (UNIQUE))
5 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'CUSTODIES' (TABLE)
5 INDEX MODE: ANALYZED (RANGE SCAN) OF
'R_CUSTODIES_CSTD' (INDEX)
7 INDEX MODE: ANALYZED (RANGE SCAN) OF
'R_HOLKEYS_CDYIK' (INDEX)
2043 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'HOLKEYS' (TABLE)
92362 VIEW OF 'index$_join$_013' (VIEW)
166827 HASH JOIN
166827 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'P_PORTFOLIOS' (INDEX (UNIQUE))
1911217 INDEX MODE: ANALYZED (FAST FULL SCAN) OF
'PORTFOLIOS_IX1' (INDEX (UNIQUE))
10575944 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'HOLDINGS' (TABLE)
2292837 INDEX MODE: ANALYZED (RANGE SCAN) OF
'R_HOLDINGS_HOLKEYIK' (INDEX)
4086 VIEW PUSHED PREDICATE
4086 SORT (GROUP BY)
2043 NESTED LOOPS
2043 NESTED LOOPS
2043 MERGE JOIN (CARTESIAN)
2043 NESTED LOOPS
2043 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'PARTNERS' (TABLE)
4086 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'P_PARTNERS' (INDEX (UNIQUE))
4086 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'CUSTODIES' (TABLE)
4086 INDEX MODE: ANALYZED (RANGE SCAN) OF
'R_CUSTODIES_CSTD' (INDEX)
4086 BUFFER (SORT)
4086 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'SECURITIES' (TABLE)
2292837 INDEX MODE: ANALYZED (RANGE SCAN) OF
'SECURITIES_IX2' (INDEX (UNIQUE))
10116948 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'HOLKEYS' (TABLE)
10575944 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_HOLKEYS_SECPOR' (INDEX)
1911217 VIEW PUSHED PREDICATE OF 'VW_GBC_22' (VIEW)
0 SORT (GROUP BY)
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'ACCDEF' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'ACCDEF_IX1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'HOLDINGS' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'R_HOLDINGS_HOLKEYIK' (INDEX)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 2 0.00 0.00
db file sequential read 16176 0.17 90.98
db file scattered read 590 0.01 1.94
Disk file operations I/O 15 0.00 0.00
SQL*Net message from client 2 0.04 0.04
SQL*Net more data to client 33 0.00 0.00the plans show that your first query has to do much more work than the second query (250M vs. 17M consistent gets). The queries use different plans and the second plan seems to be the better choice - since the first query does not return any rows. The plans also tell us where the time is spent - and there are some nested loops with extreme execution counts and a lot of expansive index access operations (especially the skip scan on P_HOLDINGS), but I would prefer to use a a plan with rowsource statistics to find the errors in the optimizers cardinality estimations.
Maybe you are looking for
-
CalDAV Calendars No Longer Work in Mountain Lion?!
Since upgrading to Mountain Lion, CalDAV no longer works for me - it fails to log in to the server (which I know is working because the same credentials and address still work on my iPhone and iPad). I've tried deleting and re-adding the calendar an
-
Webutil - Client_host not working
Hi all, I have installed/configured Webutil along with Jacob.jar and signed them. Also compiled the webutil.pll. Attached this to a form and when I used the client_host command to call any exe file, I get a please acknowledge message and the thereaft
-
After installing Oracle HTTP Server Failure ORA-12560
Hello, i was installing the Oracle HTTP Server, the installation completed succesfully. But after the install procedure, i was trying to connect to sqlplus with the following commandos: sqlplus /nolog connect SYS AS SYSDBA PASSWORD Output: ORA-12560
-
I have a problem with my calendar reminders disappearing as soon as the event time starts. Lets say I have an event at 12p and I have the calendar app set to alert me 5 minutes before. I get the alert 5 minutes before, but if I do not look at the pho
-
Mac OS X 10.7.5: In the last couple weeks, my Mail app has been frequently freezing, requiring "force quit" and restart. When I check the console log, I get pages like this leading up to the crash: What can I do about this?