Help! Replicating edits in Lightroom

Hello
Last night I made some adjustments to a shoot which I did using Lightroom presets. I synced the rest of the images so they were all the same before opening them from Lightroom into Photoshop for further editting. I unfortunately removed all the images from Lightroom but I still have the psd files which were opened in Photoshop. Unfortunately i discovered this morning that I have missed a couple of images and try as I might I have been unable to replicate the same use of presets I used last night. Is there anyway for me to tell from the psd files what presets I used so I can edit the ones I missed in the same way?
Thanks, x

I'm pretty sure your develop conditions are gone.
There are ways to prevent this from happening in the future. The most prominent way is to NOT remove the images from Lightroom. Lightroom stores all of this information for you.

Similar Messages

Help with Editing Raw in Lightroom 3.6

Hello everyone!
I am new to the forum and also to using lightroom. I just need some help with editing my RAW files. I shoot in RAW + JPEG and I just imported the files to lightroom. It didn't show me the jpeg files for importing so I only imported the RAW files, which I needed. After editing, I realised it said CR2+JPEG. Which means that both files were imported but combied into a single one. Now I basically want to edit my RAW files only. Does that mean I have edited a jpeg or a mixture of both files? How to edit only the RAW file?
If my picture says CR2+JPEG, does that mean it isnt a pure RAW file and the editing would affect the image quality?
I will really appreciate some help!

It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
Hal

I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.

I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.

after some sorting out your article, I clicked on a question mark with the message find the missing folder. This brought me to a page where I could choose a folder by year and click on it. The question marks disappeared and the photos were available. In some cases I had to click on the year folder for each subfolder by date.
The find missing folders message did not bring me to the finder window in which I could click on folders in the hard drive itself. I appreciate your help big time!!

Is editing in Photoshop with Adobe camera RAW the same as editing in Lightroom?

Hi,
I have been learning to use LIghtroom, and I am now reasonably comfortable with it. I shoot in RAW, and do my import, organizing and editing in Lightroom. My next goal is to start learning to use Photoshop (which looks like a much bigger leap than just Lightroom !).
My question is this: from all my online reading and watching videos, it seems that some people edit mainly in Lightroom and work on photos in Photoshop when needed, whereas some people like to work mainly in Photoshop. If the original RAW photo is imported into Photoshop, I believe it first opens in Camera RAW, and the editing tools there seem almost identical to Lightroom. Is that the case? In other words, is editing in Camera RAW (within Photoshop) essentially the same as editing the RAW photo in Lightroom? Any advantages to doing it in Camera RAW?
thanks,
Neil

In other words, is editing in Camera RAW (within Photoshop) essentially the same as editing the RAW photo in Lightroom?
Quote from Photoshop Help | Camera Raw
Adobe Photoshop Lightroom® software is built upon the same powerful raw processing technology that is available in the Camera Raw plug-in.

LR5: Why can't I import my pictures again after having them used for editing in Lightroom?

Hi!
A week ago I was editing 800 pictures of my last holidays in Lightroom 5.2. After having them exported I noticed that I didn't check the quality settings for export, so I wanted to import the original files again.
And that's where I'm having issues right now. I can't open them anymore. Though they are all availabe, they are shaded in grey and are not selectable:
Going back to the original holidays folder, it strikes me that it's only possible to import such pictures which I haven't picked to edit in Lightroom before:
I tested other original files of pictures I already edited in Lightroom and they work. It's only about these holiday pictures. The exported, edited holiday pictures appear in Lightroom for importing. It seems like Lightroom has problems with the original files which has been imported to Lightroom once. An Update to LR 5.6 didn't help. Has anyone any idea how to solve this problem?
Thanks
Patrick

You don't re-import photos in Lightroom. There is no need to do so and this only would cause problems.
Instead, for those photos that you cannot import, you simply find them in the Library Module, and continue to use them (if you want to export them again at different settings, then you export from the existing photo in the Library module)

Import images edited in LIghtroom 4 into Photoshop Elements 11.

I wnat to import images I have edited in Lightroom into Photoshop Elements. It will only allow me to import the original RAW file and not the XMP Sidecar file. I get the message "File type not supported. Can anyone help? John

The usual method is not to start Elements, and then try to get ("import") the edited image from LR (or, from disk). This is a more laborious approach, also limiting: for example you cannot externally edit a LR "virtual copy" this way.
LR is designed to be the front-end, which pushes the LR-edited image out to Elements on demand (which will then be started up automatically, with the relevant image already opened for you). Doing it this way, the edited image then appears back in LR by itself, afterward, and the whole process is convenient. You can go back and edit the same image further, again using LR as your single access point to the image - both for LR adjustments and for Photoshop alterations.
The standard "Edit in Photoshop / Edit in Photoshop Elements" method tries to work via ACR. This does not require saving .XMP files to disk, btw.
It is also possible to force LR to render the file itself, which removes any issues of ACR compatibility, and employs the full gamut of LR function "up front" when starting an external edit. All Elements (or whatever) then needs to be able to do, is open up a readymade standard TIFF (or PSD).
One way to force that is via dialog options, though the options presented do vary depending on the situation.
Another way is to set up an external editing preset (in LR Preferences / external editing tab). This records a given combination of file attributes and program to be used (by browsing to the image editor program file), and is saved under a name. This name appears in the context menu (Edit In... submenu) and can be used directly thereafter.

Edits in Lightroom 5-then in Photoshop CC -back to Lightroom

Hi,
Hope you can help.
1) Imported a raw image from camera (converted to dng) into lightroom 5.
2) performed some edits in the "Develop" module.
3) Did some further external edits in Photoshop CC-by switching to Photoshop CC trough Lightroom -"edit in" Lightroom menu item- Lightroom edits preserved in photoshop.
4 "saved" in Photoshop CC
5) Back to Lightroom-- Original edits from lightroom no longer in edited copy from photoshop.
Question-- How to preserve Lightroom edits? Tried doing a copy of the Lightroom settings before going to Photoshop and then pasting back into the edited copy form photoshop. Did not work out-Don't know which setting to save-saving everthing- terrible result.
Thanks.

When you send to PSD with Lightroom changes, it should render one layer in PSD that represents the original image and any changes you made in LR. So if you're seeing all those changes in PS, I'm not sure how that layer could have things undone to it. Are you sure the changes are represented in PS and not simply the PS showing the image differently? Can you try it with a drastic change in LR like a heavy, heavy vignette and make sure that shows up in PS?
Was that the first trip in to PS for that image? I've seen some inconsistencies before with multiple trips in to PS with XMP turned on where Lightroom gets out of sync with the changes that were made in PS. I did a post about it over on my blog that's a bit complicated so I'll link it here: http://bit.ly/14khoR2. Not sure if the same situation can happen with the DNG.
When you get back in to Lightroom, does the film strip have a little icon on the image that looks like three lines and an exclamation mark? That's the "I'm out of sync" with the metadata warning flag.
If you export to Photoshop as TIFF, do you see the same behavior?
Finally, does it do it on every image or just one? Maybe LR got glitched with what it thought were changes for that specific image and needs a kick.

Editing from Lightroom 4 to Photoshop CS5

HELP!
My Lightroom 4 is not working great these days.
1 - When importing my photos from my memory cards, my "Catologue" area in Lightroom is GONE, no where to be found. How can I recover this!? It was pretty important to me to have this option.
2 - When I am wanting to edit a Lightroom 4 photo (CR2 file) into Photoshop (CS5), it wont work. What will happen is Photoshop will open, that photo I edited WONT save back into my Lightroon Library, it will save into my "PICTURES" section on my MAC laptop. What I want it to do, as its done before, is save it as a edited JPEG right back into LIGHTROOM so all my images are together. This is getting extremely frustrating !! I NEEED ALL THE HELP I CAN GET PLEASE ANYONE!

http://forums.adobe.com/message/4287340#4287340

Laptop monitor choice for photo editing with lightroom and photoshop

Hi,
i'm going to buy a laptop, mostly for photo editing with lightroom and photoshop use.
I'm in trouble with the display choice.
One laptop has LG LP156WF4 or AUO B156HAN01 display, that should be very similar matte ips display with 55%-60% coverage of AdobeRGB. You can find a review in the "Display" section of these link : http://www.notebookcheck.net/Review-Clevo-W650SJ-Schenker-M504-Barebones-Notebook.114329.0 .html
The other laptop hasAU Optronics B156HW01 V.4 Matte 95%, that is a TN matte display with 95% coverage of AdobeRGB. You can find a review in these link (the display should be the green bar): http://www.anandtech.com/show/4649/mythlogic-pollux-1400-clevos-w150hr-tested/6
My question is: which one is better for photo editing with photoshop and lightroom?
Someone says that ips is better because of the fidelity of color reproduction, view angles and contrast.
Someone, on the other side, says that the TN 95% is better because of the gamut%.
Can you help me?
Thanks,
Marco Grechi

Macbook pro is out of budget
Hp assistance said that in italy they don't sell laptop with dreamcolor (i'll call again tomorrow to be sure ) but i think that it would be out of budget (max 2000 euro).
They said that the best solution for me is the zbook 15 g2 (2300 euro), but they DON'T know brand and model of the display and if i can have SSD + HD inside the zbook 15 g2.
The laptop with the lg panel costs 1500 euro. the question is; "i know that the lg display is not the best, but is it almost sufficient for my use?". In this way i may save 500/800 to buy a separated display later.
I have read that dell xps 15 and dell precision m3800 have great display, but they are glossy and very reflective. Is it a big handicap?
Do you know the 3k 15,6" display Panasonic VVX16T020G00 ? It should be a 8-bit display with 72%NTSC gamut ( http://www.panelook.com/VVX16T020G00_Panasonic_15.5_LCM_parameter_22014.html )
Do you sugget me a 3k display for photo editing?
Thanks

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish to edit in these everything works fine.

Same here. I've never had trouble with this function before.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

After editing in lightroom, i transferred the photo to final cut pro. However the photo that shows in final cut pro is the unedited version and a bit blurry. Any ideas?

after editing in lightroom, i transferred the photo to final cut pro. However the photo that shows in final cut pro is the unedited version and a bit blurry. Any ideas?

IIs there an export function from Lightroom? Did you export? Does the exported file contain your edit?
THe hard drive file size doesn't matter. What matters is the image size, it's dimensions in pixels.
IN FCP press Cmd-J to see the project properties.

Edit RAW in Lightroom 4 then Merge in Photoshop 6, or Merge in Photoshop 6 then Edit in Lightroom 4?

I am wanting to make a panorama. Should I first Edit my RAW files in Lightroom 4 then Merge in Photoshop 6, or Merge in Photoshop 6 and then Edit in Lightroom 4?
I can easily edit the RAW files first and then go back and redo them if I have to in Lightroom, but if I Merge it first in Photoshop I no longer have a RAW file to play with.
I am using .DNG files in Lightroom.

I would import the individual photos into LR, make adjustments to the individual photos, use LR’s Merge in Photoshop to create your panorama in PS, then you can make adjustments in PS and LR, but the panorama is no longer a raw file.
You could obviously use Bridge and ACR to do similar things to the individual raw photos as you can in LR, so the choice is the import/catalog structure of LR or just the files in folders non-structure of Bridge.

Hi, please help me. Bought lightroom license but was using the free and the mode of revelation is still blocked, already desistalei and installed again on my PC but the revelation mode remains disabled. What should I do? Tks

Hi, please help me. Bought lightroom license but was using the free and the mode of revelation is still blocked, already desistalei and installed again on my PC but the revelation mode remains disabled. What should I do? Tks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

Press F1 within the application to open the Help section.
If you have specific questions ask them in the Acrobat forums (this is the Reader forum).

Edit In Lightroom, catalogue in Elements 10. Can this be done?

I have 55,000 images catalogued in Elements 10 (took me three months to finish the job) and I now want to switch to Lightroom for editing whilst retaining my PS catalogue. Can I therefore, import initially into Lightroom (from camera), edit, then export to Elements?
Alternatively, would it be better to simply save my current catalogue of 'destructed' images and begin a new grand catalogue in Lightroom?
Cheers
Roger

Roger Harrison Queensland wrote:
I have 55,000 images catalogued in Elements 10 (took me three months to finish the job) and I now want to switch to Lightroom for editing whilst retaining my PS catalogue.
In my opinion, the only sensible choice is to upgrade the PSE10 catalog to a Lightroom catalog, and then do your organizing there. There really is NO smooth easy way to allow photo from a PSE catalog to be edited in Lightroom. The PSE Organizer was not designed to send photos to Lightroom's Develop Module. (However, the other way around, Lightroom's Library Module was designed to work with the PSE Editor.)
Can I therefore, import initially into Lightroom (from camera), edit, then export to Elements?
This is takes extra work for each photo, and I discourage you from doing this, since as stated, there are much better options. Furthermore, I don't see any benefit of doing this, compared to import into LR, edit in LR, leave in LR. What benefit do you see?
Alternatively, would it be better to simply save my current catalogue of 'destructed' images and begin a new grand catalogue in Lightroom?
Absolutely not. You don't want to lose all the work that you have already done and then re-do it. And you want all of your photos in a single catalog (and in my opinion, that should be the Lightroom catalog).
As I said, the easiest choice is to upgrade the PSE catalog to a Lightroom catalog, and then do your organizing and editing in Lightroom. Use PSE as an auxiliary editor for those situations where you need more power than the Lightroom editor. What objection do you have against this?
I have read just the opposite of what you say - that Lightroom is a 'light' version of Photoshop Elements
This is baloney. Lightroom was designed to be different that either PSE or Photoshop, it is a large set of capabilities and strengths, and is not a "light" version of anything. Furthermore, if your thought process was based on this non-truth that Lightroom is a "light" version of PSE, then you will be led in the wrong direction (which apparently, you have been). You need to evaluate each software based on its capabilities, and determine which one meets your needs the best, rather than evaluate the software on misleading words like "light version".

Help! Replicating edits in Lightroom

Similar Messages

Maybe you are looking for