Help! Report Transaction with Variant ??

Hi there,
another opportunity to increase your points.
Problem :
I have created a variant for the transaction mb51 (report). And now I wanted to create a 'Report Transaction' .. but I am not able to find my variant in the F4 help. Moreover if I personally type in the variant I get a message which says 'No <u>system variant</u> chosen for nonlocal object'...
I have no clue where my variant is gone and what the System variant means... please help..
regards,
ZAM
Message was edited by: ZAMUser

Problem Solved .. I saved my variant with cus& prefix and got over ..
regards,
ZAM

Similar Messages

Execute report RMMVRZ00 with variants

Hi Experts,
Could someone explain how to execute report RMMVRZ00 with variants.
Report RMMVRZ00 is similar to transaction MM60.
I am checking how to execute this report with variants.
Thank you

The following link would help in creating variants
[Creating Report Variants|http://help.sap.com/saphelp_45b/helpdata/en/73/69ee7d55bb11d189680000e829fbbd/content.htm]
If you have any specific requirement with variant, please post again

Create transaction with variants

Hello All
How to create a transaction with variants ? I m aware of the Tcodes SE93 and ShD0. but how to go about it?
when I entered the details in se93, I got an error message as " variant does not exist"
when I entered the details in ShdO, I got an error message as transaction does not exist.
I Dont have access to SHDS transaction.
Kindly advise.
Thanks.

SE93>(name of the cutom TCODE)Select the Parameter TCODE>You will get a screen with lot of inputs
In Default values select the Transactio option > enter SM30>Check skip initial screen(if u dont want to see the initial screen in SM30).
In GUI support (Check all the Check boxex).
(Last option in the screen ie.defaults)
Name of the scrren field       Values
VIEWNAME                     <View name>
UPDATE                             x

Create transaction with variant not working

Hello!
Here's my issue -- I have a program that, right now, is more of a shell than anything else. It is to access the HR Logical Database PNPCE, and to help filter the data I pull back, I created a Selection View with a couple of additional fields. I put the necessary values in these fields and saved it as a Variant.
All I want to do is create a transaction to run my program and start it using my Variant to fill in these additional fields. Using SE93, I can create a plain transaction with no problem. However, if I click the "Start with variant" drop-down field, I get a response that says screen 1000 (my default Selection Screen) has no variants.
At first we thought there was some client-side things needing configuration, but if I go create a quick-and-dirty program with a single Selection Screen value (no Selection View) and a Variant, SE93 sees the variant with no problems. So I'm wondering if maybe it has something to do with the fact that I'm using a Selection View. Unfortunately, I'm so new to ABAP, I'm completely stuck on how to proceed.
Any suggestions? Thank you so much!

Saquib, thank you SO much! You're right -- that worked.
As a relative newbie to SAP R/3 and ABAP, I'm new to little quirks like this. In other examples, the list (F4) does show the variants. For some reason, this one didn't. I entered it anyway, saved, and ran the transaction, and it popped up with the fields populated from the variant.
Again, kudos and thank you so much. Points duly awarded.

Transaction with Variant

Hi ,
I am trying to create a transaction variant for a transaction called PPOMA_CRM in SAP CRM.
There is a context menu on a subscreen.Is it possible ot hide or deactivate the context menu when using tranasaction with variant.
Similarly I have a locator in the left side which needs to be hidden.
Please help.
Neeraj

Hi,
I hope this is CRM related transaction code.
If it is a SAP Transaction code work with SHDO Transaction code... (in this Tcode you can deactivate or hidle fields in the transaction code)
Try with above tocde, it suppose to meet your requirement
Thanks
Ramakrishna Pathi

Calling an R3 Transaction with Variant

Hi there
I have just been told that part of our requirements for EP will be to use variants when accessing R3 reports from EP. I will be told the Transaction Code, and the variant, and it would be nice if I could execute the report with that variant as the iview loads.
I have found a couple of posts which talk about using tcode START_REPORT, and then D_SREPOVARI-REPORT=<REPORTNAME> & D_SREPOVARI-VARIANT = <VARIANTNAME> in the application parameters, but the problem is all this does is load the variant ... it doesn't actually process the first screen, even if I set the option PROCESS FIRST SCREEN to yes.
I see from the posts that I can create a new report, which calls the required report with the required variant. Is there no other, simpler, way of doing this?
Any information would be greatly appreciated.

You're probably missing parameter: D_SREPOVARI-NOSELSCRN=X

Background Report Program with Variants to be Overwritten

I have an Following Scenario.
I have an Report program with the Selection Screen displaying an Input Parameter of date type sy-datum.This particular program is scheduled as an Background Job.
Now when i execute the program in background the existing variant date must be overwritten with any new values . So please provide an solution for this.
Thanks
K.Nadesh Kumar

hi nadesh,
enter date on your selection screen , then save variant.
tick the selection variable check box i.e L.
now click on pushbutton SELETION VARIABLE.
Then select type D and select the criteria current date or whatver of your choice.
if you are not clear then search for the thread "daily background job". I think you will get the answer from there.
Regards
Abhinesh

SE93, custom transaction with variant, how to check if variant is used

Hi,
I have created a customer transaction ZHCM_CV01N for transaction CV01N - created a variant with SHD0 and assigned it to ZHCM_CV01N).
sy-tcode returns 'CV01N' for both CV01N and ZHCM_CV01N transactions.
How can I check whether user ran CV01N or ZHCM_CV01N ?
I thought maybe I'd be able to read current transaction variant, if it is the same one I've created in SHD0 then I'll know that my modified transaction is running and not the original one.
Cheers,
Bart

Hi,
maybe you should delete autorithation for CV01N for users, then you can be sure, that only your new transaction is running.
Regards
Nicole

Copying Queries from one infoset to the other with variants

Hello Gurus,
I have two infosets (A & B) based on logical database PNPCE. Infoset A & B are exactly the same. Now, I want to copy the queries of infoset A to infoset B.
I am unable to copy the queries with variants. And I am getting following message:
Error when copying query report XXXXXXX= with variants. Error when importing query
FYI, I am able to copy the queries without variants successfully, using 'Sap Query: Special Copy Functions'.
Any help on this would be much appreciated.
Thanks,
Ikram

I think you are right. I see now that I am overcomplicating things.
To answer your question, no I do not add any color adjustments to the individual compound clips. I double click into the compound clips and make color adjustments to each of the angles from the multicam clip. When copying a clip made from the same multi cam clip from one project to another, any color adjustments made to the angles of that multicam clip that was copied over from the other project, does not carry over to the same multicam clips to the new project it was copied to - even if you break the compound clip apart to just the multicam clip, at least that's what I've noticed.
But as you said, the easier thing to do, and this makes total sense now, would be create your multicam clip, and use keywords to label the parts in the browser, then drag the clips to the timeline as you need them. I'm assuming that the color corrections you apply to the angles on the timeline will be automatically applied to new keyword clips you drag to the timeline? Also, to name those multicam clips on the timelines, would you use markers? Is this correct?
I really need to watch a few online tutorials on compound clips, but what Luis said has really cleared things up for me.
Thanks so much for your help and patience guys!

Report RNOTIFUPDATE01 and Variant SAP&WORKPLACE

Hi all,
in Solution Manager I scheduled report RNOTIFUPDATE01 with variant SAP&WORKPLACE.
Following the F1-help and also note 781163 using this variant the report should only replicate/create messages to/in Sol Man which have not been closed yet (status "Solution Confirmed" or "Confirmed Automatically") at Service Marketplace.
Unfortunately using this variant I got many many old messages in Sol Man now. Messages which have SAP status "Solution Confirmed" and Sol Man user status "Sent to Support". Beside the fact the report did not work correctly (or I did misunderstand something) is there a quick way to get the messages to user status "Confirmed"?
Report CRM_SOCM_SERVICE_REPORT is not working here.
Thanks in advance.

I found tables CRM_JCDS and CRM_JEST which contain the status i need to change (user status and system status in both tables).
Does anyone know if there is a report to perform changes on these tables?

Creating a report transaction(SE93) and Start with variant

I have a report that I am creating a transaction using SE93 with in our development client. I also have a variant associated with this report.
When I am on SE93, I entered the program name, selection screen = 1000, and choose the dropdown list for "Start with variant", nothng appears. My variant does not appear in the dropdown. Why is that?
I also tried creating a transport for the variant, thinking that this was the problem, but that didn't help either.
What am I missing here?
Thanks for your help.

Just type the variant name instead of F4. You may see some inconsistencies because the variant is created under local object.
Edited:
Right answer would be
Go to se38 - Enter the program name - choose variants - Change - Enter variant name (choose attributes but not values) - go to UTILITIES (on application menu) - Transport request - Create a transport before you create a transaction.
The reason: You cannot use local variant in transactions and the variants you have created in the program are local.
Good luck
Edited by: Sampath Kumar on Nov 16, 2009 11:04 AM
Edited by: Sampath Kumar on Nov 16, 2009 11:07 AM

Create new transaction with default variant

Dear all,
I want to create a new tcode, which will be a replica of IW58 and save a default variant only in this replica.
Is this possible? If yes how to do it please?
Thanks a lot for your kind consideration
David

Maintain the variant you would like to use with IW58
Goto SE80, navigate to your Customer Package (Z*), open the node "Transactions". Right Klick -> Create Transaction.
Set a Transaction-Code and an apropriate Start Object (Most likely Dialog Transaction or Report Transaction). Assign the Report RIQMEL20.
Then fill in the Field "Start with variant" by selecting the variant you would like to use.
Hope that helps.

Call transaction (MF60) with variant

hi
in user will save some variant of the TCODE : MF60, and will put they in job what use SM36 to set job schedule.but the resule message can't be know in BG work.
i want to write a report to run the Transaction (MF60) and to save message with abap application log.
first:
how to find the Transaction contain variant?
second:
if i use abap code: CALL transaction in report,how to set variant to transaction.
three:
i know the command:SUBMIT will call from VARIANT:
but MF60's report is RMPU_SEL_SCREEN,but this report have two transaction: MF60,MF63.
how to set Transaction to this RMPU_SEL_SCREEN.
four:
i know the SM36 will set variant to TCODE,how to open job in ABAP.
thank you very much!

in my company,users will create themselves varaints about MF60.
and they put variants in job schedule (use SM36 ) in bg work at night.
so when these job is over,the last message don't show for they.
they doubt about it and they will spent lot time to get what oneself document for last genearate.
i want to write a report and put this report in job schedule to run MF60.
and get last message for call transaction in abap appliacation log.
next day users just use TCODE SLG1 to view last night run MF60 result.
so first i must get all MF60 of variant what will be run and get message
when this transancations is over.save message in database!
thank you very much for your help!

Starting transaction with a variant

Hi Experts,
I have a Z tcode for a program which i would like to start with one selection field disabled. For this i have created a variant but i would like that whenever the tcode is run, the variant is selected by default (i.e. the screen field is disabled).
To accomplish this i tried to add this variant to the transaction via SE93. But whenever i try to save it gives me error that "No system Variant defined for nonlocal object". I am not able to proceed beyond this point. Please guide me how to achieve this without creating a new tcode.
Any help will be deeply appreciated. Thanks in advance.
Sakshi Dogra

Hi
Create a variant with your specified selection-screen options and save it.while saving your variant there is a check box 'protect variant' check it and save it.
go to se93 give tcode name
and select radio button 'program and selection screen(report transaction)'
give program name and enter
your variant will appear in the vaiant selection,select it.
save it in a specific package and you will get expected result.
<removed by moderator>
Thanks
Adil
Edited by: Thomas Zloch on Sep 14, 2011 10:03 PM

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Help! Report Transaction with Variant ??

Similar Messages

Maybe you are looking for