[Help Req] Cannot login in with OD credentials

I am setting up for my first time a full Mac network (i come from MS/AD background).
I created a test account.. and OD credentials passed fine. Mobile account was created and offline worked as expected.
I then deleted the test account and created a few of our real accounts in OD... and then tried to login via cleanly built iMacs and MacBooks. however.... I am now no longer able to get any account to login.
What happens is this... I pass the login in credentials.. then get the beach ball.. then after a minute or two, the login panel will shiver.
Passing bad credentials will get an automatic denial. So I know the machines are doing something... but I have dug and dug and cannot figure how what has gone wrong.
Does anyone have any ideas?

HI,
can you please provide the logs for the issue?

Similar Messages

Cannot login using Active Directory credentials

We are experimenting with macs at our company. We bought a mac pro which is running 10.8.2. I am able to join active directory but cannot log in with any user account. I have tried logging in as myself and some test accounts. I have read some other forums to get some ideas but none have worked so far. I have tried to rejoin the mac to AD, check and uncheck different things under advanced options with no luck. These include Create mobile account at login, force local home directory on startup disk, force unc path from active directory to derive network home location, etc. I have confirmed the mac has a valid ip address with the correct dns settings. I can see users from the directory editor so I know there is some sort of communication with the domain. I am wondering if there is something small that I am missing. Any help is greatly appreciated.

have you set pam.conf ok? have you tested kinit to make sure you can get a ticket?

Not able to pass portal login page with valid credentials using WebDispatch

Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen

' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm

[fixed]Cannot login gnome with noremal user but root user can work..

Hi all,
after install some gnome-shell-extension useing yaourt, I find normal user cannot login gnome, but root user can go this.
thanks
--kenan
Last edited by kenan (2011-10-18 01:45:03)

clone config file from root user to fix this issue.

Cannot login apple with my apple id

I tried to login iCloud with my apple id .But it says my apple id is not yet a icloud account.Well,what should I do?

Did you verify your account with your email address? Did you sign up for icloud?
http://www.apple.com/support/icloud/account/

Help - using custom login module with embedded jdev oc4j to access ejb 3

Hi All (Frank ??),
I'm just wondering if anyone has successfully been able to leverage a custom login module in combination
with a client that connects to a local EJB 3 stateless session bean through Jdeveloper 10.1.3.2's embedded oc4j.
I have spent 2+ days trying to get this to work - and i think I resound now to the fact im going to
have to deploy to oc4j standalone instead.
I got close.. but finally was trumped with the following error from the client trying to access the ejb:-
javax.naming.NoPermissionException: Not allowed to look up XXXXXX, check the namespace-access tag
setting in orion-application.xml for details.
Using the various guides available, I had no problem getting the custom login module working
with a local servlet running from JDev's embedded oc4j.. however with ejb - no such luck.
I have a roles table (possible values Member, Admin) - that maps to sr_Member and sr_Admin
respectively in various config files.
I'm using EJB 3 annotations for protecting methods .. for example
@RolesAllowed("sr_Member")
Steps that I had to do so far :-
In <jdevhome>\jdev\system\oracle.jwee.10.1.3.40.66\embedded-oc4j\config\system-jazn-data.xml1) Add custom login module
 <application>
 <name>current-workspace-app</name>
 <login-modules>
 <login-module>
 <class>kr.security.KnowRushLoginModule</class>
 <control-flag>required</control-flag>
 <options>
 <option>
 <name>dataSource</name>
 <value>jdbc/DB_XE_KNOWRUSHDS</value>
 </option>
 <option>
 <name>user.table</name>
 <value>users</value>
 </option>
 <option>
 <name>user.pk.column</name>
 <value>id</value>
 </option>
 <option>
 <name>user.name.column</name>
 <value>email_address</value>
 </option>
 <option>
 <name>user.password.column</name>
 <value>password</value>
 </option>
 <option>
 <name>role.table</name>
 <value>roles</value>
 </option>
 <option>
 <name>role.to.user.fk.column</name>
 <value>user_id</value>
 </option>
 <option>
 <name>role.name.column</name>
 <value>name</value>
 </option>
 </options>
 </login-module>
 </login-modules>
 </application>2) Grant login rmi permission to roles associated with custom login module (also in system-jazn-data.xml)
<grant>
 <grantee>
 <principals>
 <principal>
 <realm-name>jazn.com</realm-name>
 <type>role</type>
 <class>kr.security.principals.KRRolePrincipal</class>
 <name>Admin</name>
 </principal>
 </principals>
 </grantee>
 <permissions>
 <permission>
 <class>com.evermind.server.rmi.RMIPermission</class>
 <name>login</name>
 </permission>
 </permissions>
</grant>
<grant>
 <grantee>
 <principals>
 <principal>
 <realm-name>jazn.com</realm-name>
 <type>role</type>
 <class>kr.security.principals.KRRolePrincipal</class>
 <name>Member</name>
 </principal>
 </principals>
 </grantee>
 <permissions>
 <permission>
 <class>com.evermind.server.rmi.RMIPermission</class>
 <name>login</name>
 </permission>
 </permissions>
</grant>3) I've tried creating various oracle and j2ee deployment descriptors (even though ejb-jar.xml and orion-ejb-jar.xml get created automatically when running the session bean in jdev).
My ejb-jar.xml contains :-
<?xml version="1.0" encoding="utf-8"?>
<ejb-jar xmlns ....
<assembly-descriptor>
 <security-role>
 <role-name>sr_Admin</role-name>
 </security-role>
 <security-role>
 <role-name>sr_Member</role-name>
 </security-role>
</assembly-descriptor>
</ejb-jar>Note- i'm not specifying the enterprise-beans stuff, as JDev seems to populate this automatically.
My orion-ejb-jar.xml contains ...
<?xml version="1.0" encoding="utf-8"?>
<orion-ejb-jar ...
<assembly-descriptor>
 <security-role-mapping name="sr_Admin">
 <group name="Admin"></group>
 </security-role-mapping>
 <security-role-mapping name="sr_Member">
 <group name="Member"></group>
 </security-role-mapping>
 <default-method-access>
 <security-role-mapping name="sr_Member" impliesAll="true">
 </security-role-mapping>
 </default-method-access>
</assembly-descriptor>My orion-application.xml contains ...
<?xml version="1.0" encoding="utf-8"?>
<orion-application xmlns ...
<security-role-mapping name="sr_Admin">
 <group name="Admin"></group>
</security-role-mapping>
<security-role-mapping name="sr_Member">
 <group name="Member"></group>
</security-role-mapping>
<jazn provider="XML">
 <property name="role.mapping.dynamic" value="true"></property>
 <property name="custom.loginmodule.provider" value="true"></property>
</jazn>
<namespace-access>
 <read-access>
 <namespace-resource root="">
 <security-role-mapping name="sr_Admin">
 <group name="Admin"/>
 <group name="Member"/>
 </security-role-mapping>
 </namespace-resource>
 </read-access>
 <write-access>
 <namespace-resource root="">
 <security-role-mapping name="sr_Admin">
 <group name="Admin"/>
 <group name="Member"/>
 </security-role-mapping>
 </namespace-resource>
 </write-access>
</namespace-access>
</orion-application>My essentially auto-generated EJB 3 client does the following :-
 Hashtable env = new Hashtable();
 env.put(Context.SECURITY_PRINCIPAL, "matt.shannon");
 env.put(Context.SECURITY_CREDENTIALS, "welcome1");
 final Context context = new InitialContext(env);
 KRFacade kRFacade = (KRFacade)context.lookup("KRFacade");
...And throws the error
20/04/2007 00:55:37 oracle.j2ee.rmi.RMIMessages
EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER
WARNING: Exception returned by remote server: {0}
javax.naming.NoPermissionException: Not allowed to look
up KRFacade, check the namespace-access tag setting in
orion-application.xml for details
 at
com.evermind.server.rmi.RMIClientConnection.handleLookupRe
sponse(RMIClientConnection.java:819)
 at
com.evermind.server.rmi.RMIClientConnection.handleOrmiComm
andResponse(RMIClientConnection.java:283)
....I can see from the console that the user was successfully authenticated :-
20/04/2007 00:55:37 kr.security.KnowRushLoginModule validate
WARNING: [KnowRushLoginModule] User matt.shannon authenticated
And that user is granted both the Admin, and Member roles.
The test servlet using basic authentication correctly detects the user and roles perfectly...
public void doGet(HttpServletRequest request,
 HttpServletResponse response)
 throws ServletException, IOException
 LOGGER.log(Level.INFO,LOGPREFIX +"doGet called");
 response.setContentType(CONTENT_TYPE);
 PrintWriter out = response.getWriter();
 out.println("<html>");
 out.println("<head><title>ExampleServlet</title></head>");
 out.println("<body>");
 out.println("The servlet has received a GET. This is the reply.");
 out.println(" getRemoteUser = " + request.getRemoteUser());
 out.println(" getUserPrincipal = " + request.getUserPrincipal());
 out.println(" isUserInRole('sr_Admin') = "+request.isUserInRole("sr_Admin"));
 out.println(" isUserInRole('sr_Memeber') = "+request.isUserInRole("sr_Member"));Anyone got any ideas what could be going wrong?
cheers
Matt.
Message was edited by:
mshannon

Thanks for the response. I checked out your blog and tried your suggestions. I'm sure it works well in standalone OC4J, but i was still unable to get it to function correctly from JDeveloper embedded.
Did you ever get the code working directly from JDeveloper?
Your custom code essentially seems to be the equivalent of a grant within system-jazn-data.xml.
For example, the following grant to a custom jaas role (JAAS_ADMIN) that gets added by my custom login module gives them rmi login access :-
 <grant>
 <grantee>
 <principals>
 <principal>
 <realm-name>jazn.com</realm-name>
 <type>role</type>
 <class>kr.security.principals.KRRolePrincipal</class>
 <name>JAAS_Admin</name>
 </principal>
 </principals>
 </grantee>
 <permissions>
 <permission>
 <class>com.evermind.server.rmi.RMIPermission</class>
 <name>login</name>
 </permission>
 </permissions>
 </grant>If I add the following to orion-application.xml

<namespace-access>
 <read-access>
 <namespace-resource root="">
 <security-role-mapping>
 <group name="JAAS_Admin"></group>
 </security-role-mapping>
 </namespace-resource>
 </read-access>Running a standalone client against the embedded jdev oc4j server gives the namespace-access error.
I tried out your code by essentially creating a static reference to a singleton class that does the role lookup/provisioning with rmi login grant :-
From custom login module :-
private static KRSecurityHelper singleton = new KRSecurityHelper();
protected Principal[] m_Principals;
 Vector v = new Vector();
 v.add(singleton.getCustomRmiConnectRole());
 // set principals in LoginModule
 m_Principals=(Principal[]) v.toArray(new Principal[v.size()]);
Singleton class :-
package kr.security;
import com.evermind.server.rmi.RMIPermission;
import java.util.logging.Level;
import java.util.logging.Logger;
import oracle.security.jazn.JAZNConfig;
import oracle.security.jazn.policy.Grantee;
import oracle.security.jazn.realm.Realm;
import oracle.security.jazn.realm.RealmManager;
import oracle.security.jazn.realm.RealmRole;
import oracle.security.jazn.realm.RoleManager;
import oracle.security.jazn.policy.JAZNPolicy;
import oracle.security.jazn.JAZNException;
public class KRSecurityHelper
private static final Logger LOGGER = Logger.getLogger("kr.security");
private static final String LOGPREFIX = "[KRSecurityHelper] ";
public static String CUSTOM_RMI_CONNECT_ROLE = "remote_connect";
private RealmRole m_Role = null;
public KRSecurityHelper()
 LOGGER.log(Level.FINEST,LOGPREFIX +"calling JAZNConfig.getJAZNConfig");
 JAZNConfig jc = JAZNConfig.getJAZNConfig();
 LOGGER.log(Level.FINEST,LOGPREFIX +"calling jc.getRealmManager");
 RealmManager realmMgr = jc.getRealmManager();
 try
 // Get the default realm .. e.g. jazn.com
 LOGGER.log(Level.FINEST,LOGPREFIX +"calling jc.getGetDefaultRealm");
 Realm r = realmMgr.getRealm(jc.getDefaultRealm());
 LOGGER.log(Level.INFO,LOGPREFIX +"default realm: "+r.getName());
 // Access the role manager for the remote connection role
 LOGGER.log(Level.FINEST,
 LOGPREFIX +"calling default_realm.getRoleManager");
 RoleManager roleMgr = r.getRoleManager();
 LOGGER.log(Level.INFO,LOGPREFIX +"looking up custom role '"
 CUSTOM_RMI_CONNECT_ROLE "'");
 RealmRole rmiConnectRole = roleMgr.getRole(CUSTOM_RMI_CONNECT_ROLE);
 if (rmiConnectRole == null)
 LOGGER.log(Level.INFO,LOGPREFIX +"role does not exist, create it...");
 rmiConnectRole = roleMgr.createRole(CUSTOM_RMI_CONNECT_ROLE);
 LOGGER.log(Level.FINEST,LOGPREFIX +"constructing new grantee");
 Grantee gtee = new Grantee(rmiConnectRole);
 LOGGER.log(Level.FINEST,LOGPREFIX +"constructing login rmi permission");
 RMIPermission login = new RMIPermission("login");
 LOGGER.log(Level.FINEST,
 LOGPREFIX +"constructing subject.propagation rmi permission");
 RMIPermission subjectprop = new RMIPermission("subject.propagation");
 // make policy changes
 LOGGER.log(Level.FINEST,LOGPREFIX +"calling jc.getPolicy");
 JAZNPolicy policy = jc.getPolicy();
 if (policy != null)
 LOGGER.log(Level.INFO, LOGPREFIX
 + "add to policy grant for RMI 'login' permission to "
 + CUSTOM_RMI_CONNECT_ROLE);
 policy.grant(gtee, login);
 LOGGER.log(Level.INFO, LOGPREFIX
 + "add to policy grant for RMI 'subject.propagation' permission to "
 + CUSTOM_RMI_CONNECT_ROLE);
 policy.grant(gtee, subjectprop);
 // m_Role = rmiConnectRole;
 m_Role = roleMgr.getRole(CUSTOM_RMI_CONNECT_ROLE);
 LOGGER.log(Level.INFO, LOGPREFIX
 + m_Role.getName() + ":" + m_Role.getFullName() + ":" + m_Role.getFullName());
 else
 LOGGER.log(Level.WARNING,LOGPREFIX +"Cannot find jazn policy!");
 else
 LOGGER.log(Level.INFO,LOGPREFIX +"custom role already exists");
 m_Role = rmiConnectRole;
 catch (JAZNException e)
 LOGGER.log(Level.WARNING,
 LOGPREFIX +"Cannot configure JAZN for remote connections");
public RealmRole getCustomRmiConnectRole()
 return m_Role;
}Using the code approach and switching application.xml across so that namespace access is for the group remote_connect, I get the following error from my bean :-
INFO: Login permission not granted for current-workspace-app (test.user)
Thus, the login permission that I'm adding through the custom remote_connect role does not seem to work. Even if it did, i'm pretty sure I would still get that namespace error.
This has been such a frustrating process. All the custom login module samples using embedded JDeveloper show simple j2ee servlet protection based on settings in web.xml.
There are no samples showing jdeveloper embedded oc4j using ejb with custom login modules.
Hopefully the oc4j jdev gurus like Frank can write a paper that demonstrates this.
Matt.

Help! Cannot open files with certain applications

I updated to OS Tiger from OSX some weeks ago. Before, I could run a program that labels files in a given folder with names given in an Excel file (csv format). This "csv sorter" usually asks for the csv file once I put in the folder with the files that should be labeled. In the dialog window that opened I could just go through my harddrive to my csv file and choose it. Now the csv files always appear in pale grey and I cannot click on them. Has anybody an idea why certain programs should not recognize certain filetypes any more in OS Tiger? It seems like I cannot access any file with the csv sorter any more, no matter which file type. Thanks for your help!

found this on another websites forum .... it worked
I figured it out. Thanks everyone!
I had to turn on my wireless mouse... And even though I wasn't using my wireless mouse and just the trackpad...I had to turn on my wireless mouse then adjust those settings...Had to turn down the speed. Then Once I shut the mouse off and started to use the trackpad again it works perfectly.
I'm not sure why the mouse settings would change the trackpad settings but it did.

Need some help here. cannot communicate with Fingerprint sensor

Ok, so I rebooted and was able to install the new sw ver. .245 ...but the T500 still cannot communicate with the sensor. It asks me to verify that the sensor is "ready" but give no guidance on how to do so in any of the help options or in the fingerprint reader manager or the device manager...so how can I find the sensor??? Very frustrating. Please help.

The scriptgen takes your CAP file and generates an APDU script to load it onto a JCRE implementation. The installer applet is what recieves the APDU commands to load that CAP file. Read the JCVM specification and read what a CAP file is and all the individual CAP components that make up the CAP file.

Help creating a login applet with JDBC

Hi, I'm trying to create a login applet using a table from a database (created with Microsoft Access). The bottom line is that I have very little knowledge of ActionListeners. I do know some things about JDBC, but most of it is through notes and lots of reading. I was wondering how to go about looking through a table (with two columns, user and password), to see if it matches what is typed into a JTextField and a JPasswordField. Just a sample piece of code would be helpful. Thank you very much in advanced. Also, I have the GUI done for what I need, just no ActionListeners or JDBC functionality implemented. Here it is:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class login extends JFrame /*implements ActionListener*/ {
     private Container container;
     private GridBagLayout layout;
     private GridBagConstraints gbc;
     public login()
          super("Login");
          setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
        setSize(300,130);
        setLocationRelativeTo(null);
          container = getContentPane();
          layout = new GridBagLayout();
          container.setLayout(layout);
          gbc = new GridBagConstraints();
          labelUser = new JLabel("Username:");
          gbc.insets = new Insets(2,2,2,2);
          container.add(labelUser, gbc);
          textUser = new JTextField(15);
          gbc.gridx = 1;
          gbc.gridwidth = 3;
          container.add(textUser, gbc);
          labelPassword = new JLabel("Password:");
          gbc.gridy = 1;
          gbc.gridx = 0;
          gbc.gridwidth = 1;
          container.add(labelPassword, gbc);
          textPassword = new JPasswordField(15);
          gbc.gridx = 1;
          gbc.gridwidth = 3;
          container.add(textPassword, gbc);
          button1 = new JButton("Login");
          gbc.gridy = 2;
          gbc.gridx = 1;
          gbc.gridwidth = 1;
          container.add(button1, gbc);
          button2 = new JButton("Cancel");
          gbc.gridx = 2;
          container.add(button2, gbc);
     public static void main(String args[]) {
        new login().setVisible(true);
    private JButton button1, button2;
    private JLabel labelUser, labelPassword;
    private JTextField textUser;
    private JPasswordField textPassword;
}Thank you again in advanced.

Sir,
Much of your question makes middling sense to me. You say applet but you have JFrame for example. I would caution you right now an applet with access for a DB is asking for trouble. Never minding the various security issues Access is not really intended for this sort of operation.
Now none of that actually seems to be your question but I just thought I'd address that before you go too far down a road fraught with peril.
As far as what I think you are asking assuming our table looks like this.
tblUser
username VARCHAR (access text field) primary key
password VARCHAR (again known in access as text)then the code would look something like this...
Connection c; //create your connection
PreparedStatement ps = c.prepareStatement("SELECT username FROM tblUser WHERE username=? AND password=?");
ps.setString(1,usernameVariable);
ps.setString(2,passwordVariable);
ResultSet rs = ps.executeQuery();
if(rs.next()){
// login successful
}else{
// login failed!
rs.close();
ps.close();
c.close();Also duffymo will be unhappy if I don't mention that you will really want to give second thought to mixing your database code with your GUI code. Please take a gander through http://java.sun.com/blueprints/patterns/MVC.html
Sincerely,
Slappy

Help req'd using VideoPier with iMovie 08

As iMovie 08 can't read my video footage I'm using this application - VideoPier- to de-code it. However, when I export my footage to iMovie 08 it either goes to the 'Folder' or just now it's gone nowhere! To confuse matters even more, the footage has even gone direct to iMovie 08 as it should do but only on two rare occasions. The guy at VideoPier seems to be at to loss to know why I have this problem. Is there anyone out there who can help me.....please?

Hi, Bengt,
+I think there is a difference between 6.0.3 and 6.0.4. Had problems with 0.3 after+
+installing iLife08 that was OK after 6.0.4 up-grade. (PPC dG5)+
That's why I said 'reportedly.'
I think you are correct. I, too, am suspicious of a difference, and I also downloaded version 6.0.4. I did the download as soon as I saw it on Apple's site after getting my new iMac.
I did have the prior iM6 version that I ported over from my old iMac, too. I am sure that I transferred all my old stuff before downloading 6.0.4, but I didn't run into any problems with it not installing.
Regards,
Beverly

Why I cannot login GTalk with iMessage?

My google account is the same as my apple id. It just keeps saying
Messages can't log in to [email protected] because your login ID or password is incorrect.
However, I can login with other IMs.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

Cannot login with AD credentials on iMac

Greetings:
I have a brand new 27" Intel iMac that had been allowing AD logins just find until today. Now, no matter what I do, unbinding, rebooting, manually joining domain (dsconfigad), etc I cannot login using my AD credentials. This had been working flawlessly until today. I can bind to AD no problem. When I go to login with my known good account, I just get the window shake. Logging in with a local account, I see error messages in the console of:
DNS Update Failed & Enter Machine Password
The machine account is already staged in our OU. I am not clear what the DNS error is alluding to.
reading through these postings: http://www.macwindows.com/snowleopardAD.html
I tried disabling creating mobile accounts at login. However that did not fix the issue.
I believe our campus is running Win2K8 AD servers. Our campus DNS appliance is a separate box, but should know how to delegate to AD (?). The other 10.6.3 machines we have, are authenticating against AD fine.
Any ideas?

Marcus is correct - the ZAM administration accounts (ZAM 7.x) are stored (encrypted) within the ZAM database.
Within ZAM 7.x there is no way to integrate this with AD (either by LDAP referral or some kind of identity / password sync) and AFAIK no plans to add this.
I believe in the ZCM version of asset (and I hope the standalone version of ZAM10 still in dev) you set up the AD account(s) that is/are allowed Admin etc. access within ZAM, then LDAP referrals are used to authenticate via AD. I don;t know this for sure, though.

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

Hi there,
I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
instances.
A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
Currently both instances are running on same node.
While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
Please help resolve the issue.
Thanks,
AY

Hello,
I Confirm that I encountred the same problem when the first domain controller was dow !!
During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
When the firts DC restart finishied restarting every thing was Ok !
The Question here : Why the cluster instance does'nt used the second DC ???
Best Regards
J.K

Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.

Hello,
I have gone through couple of posts regarding this issue but couldn't get the right solution. Could you please help what exactly we are missing here.
Details:
1) we have two SQL instances on one standalone machine (Default Instance (2008 SP3) + Named Instance (SQL 2012 SP1))
2) Both instances are configured to accept SQL+ Windows authentication.
3) when we give access to our users they are getting following exception if they connect with 'windows authentication'. (For both instances)
Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
Note: (Being a sys + windows admin I'm able to connect both the instances from same client machine without
any issues)
4) Also, we observed following error in windows application event log,
SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.
The logon attempt failed [CLIENT: 192.168.xxx.xyx]
5) If we create SQL login it is working fine without any issues.
Could someone guide/help me identifying and fixing this issue.
Thank you

Hello,
Are those Windows Logins associated to domain Windows accounts? Windows Logins work for domain accounts and local Windows account created on the server where the SQL Server instance is installed (and used to login locally to the server).
Could you try to delete one of the Windows logins that fail to login , and try to recreate them?
The following resources may help:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/12/19/error-message-quot-login-failed-the-login-is-from-an-untrusted-domain-and-cannot-be-used-with-windows-authentication-quot.aspx
http://support.microsoft.com/kb/555332
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

[Help Req] Cannot login in with OD credentials

Similar Messages

Maybe you are looking for